Search Results

A field experiment was performed to measure the effects of oncoming illuminance profiles with different photometric and temporal characteristics on visual recovery and subjective discomfort. Target detection time was correlated with the dosage, and rated discomfort was correlated with the peak illuminance of each profile. Older subjects generally had longer recovery times, but there were no differences between the age groups in terms of rated discomfort. The results suggest that discomfort glare is not predictive of visual disability and that control of luminous intensity at isolated points within the distribution of headlamps alone is not sufficient to minimize glare recovery.

Vehicle headlamps are essential for driver safety at night, and technological evolution of headlamps over several decades has brought substantial improvements to driver visibility and comfort. Nonetheless, glare remains an important concern among many in the driving public, perhaps even more so in North America, where requirements for headlamps differ from those in much of the rest of the world. In most of the world, headlamps producing higher luminous flux are required to have automatic leveling and cleaning systems, thought to help reduce glare. The arrival of headlamp systems in the worldwide marketplace with luminous flux values just below those triggering requirements for leveling and cleaning systems will bring new questions about the causes of and countermeasures for glare.

Rear signal lighting on vehicles has two primary functions: informing other drivers about the presence of a vehicle on the roadway, and alerting those other drivers to intentions of a vehicle's driver before actions such as turning or stopping occur. In the present paper, reports, articles and other technical literature, pertaining to rear lighting signal system photometric requirements and use of dynamic display features, are reviewed. The objective is to synthesize recommendations for configuring rear lighting in order to optimize systems for different ambient weather and lighting conditions, dirt accumulation, and warning functions. Research results from European, North American and Japanese contexts are discussed.

We summarize the development and initial deployment of a system that can be mounted along an intersection, curve, drive-in, or parking facility to efficiently gather relevant data about headlamp patterns that might relate to glare or visibility. The system can run autonomously to collect many vehicles per data collection period. The system includes a range finder to capture information when an approaching vehicle is at a specific location, a digital camera to store images of oncoming headlamp position (i.e., mounting height), two arrays of light sensors to measure the vertical headlamp illumination profile (e.g., angular position of headlamp beam cutoff or maximum luminous intensity), and a color-calibrated illuminance meter at the angular location of an oncoming driver's eyes. From the headlamp mounting height data and the vertical cutoff location data, an estimate of the headlamp aim distribution can be made.

Illumination from high intensity discharge (HID) headlamps differs from halogen headlamp illumination in two important ways: HID headlamps have higher overall light output and a spectral power distribution that differs from halogen headlamps. These differences have been hypothesized to result in superior visibility with HID headlamps and most particularly in the periphery. These same factors, though, have also been conjectured to result in increased glare for drivers facing HID headlamps in oncoming driving situations. The present paper outlines a series of experimental investigations using halogen, HID, and blue-filtered halogen illumination to measure their relative impact on discomfort glare and disability glare under conditions matching those that might be experienced by oncoming drivers at night. Discomfort glare is determined using the scale devised by de Boer; disability glare is determined by measuring subjects' contrast sensitivity under different lighting conditions.

Recent studies have shown that high-intensity discharge (HID) headlamps provide visual benefits to the vehicle operator that may lead to increased nighttime driving safety. An experimental field investigation is described that further investigates the visual performance aspects of HID forward lighting systems to isolate and examine the role of lamp spectral distribution under realistic nighttime driving conditions. This study examines lamp spectral distribution by direct comparison of HID source spectra to one that simulates a conventional halogen source. Two additional lamp spectra are also included in this study, a “cool” distribution with a high percentage of short wavelength visible light and a “warm” distribution with a high percentage of long wavelength visible light. Subjects perform a visual tracking task, cognitively similar to driving, while seated in the driver's seat of a test vehicle.

Immediate response to stop lamps when driving is crucial to roadway safety. Previous research has demonstrated that neon and light emitting diode (LED) stop lamps that have a dynamic sweeping luminance distribution can be just as or more effective than standard stop lamps. Sweeping neon and LED lamps with sweep-up times equal to or less than 100 ms resulted in reaction times equal to or shorter than those obtained with a conventional, non-sweeping incandescent stop lamp. At the same time, an LED stop lamp having the same far-field luminous intensity characteristics as the neon lamp, resulted in shorter reaction times than the neon lamp. The LED stop lamp differed from the neon lamp in two important ways. First, its color was different; the LED lamp had a dominant wavelength of about 630 nm, in comparison to the neon lamp with a dominant wavelength of about 615 nm.

A research project has been completed to determine if commercially available blue coated lamps provide visual benefit for nighttime driving over standard tungsten halogen lamps. As an esthetic option, tungsten halogen lamps with an absorptive coating have been developed to mimic the appearance of HID lamps. The transmission of these coated lamp results in a continuous output spectrum, like standard tungsten halogen, but with a lower “yellow” content, giving an appearance similar to HID lamps. Aside from esthetic reasons for using blue coated lamps, there is also evidence that the spectral output may provide visual benefits over standard tungsten halogen lamps in nighttime driving. While driving at night, off-axis or peripheral vision is in the mesopic response range and the eye's sensitivity shifts towards shorter wavelengths or “blue” light.

Recent technological developments have begun to add a number of new configurations for vehicle forward lighting to the realm of possibility, including high-intensity discharge and light-emitting diode headlamps, and adaptive forward-lighting systems. These systems can offer substantial differences in performance and appearance from conventional filament-based headlamps that have been ubiquitous for many decades. These differences have not gone unnoticed by the U.S. driving public. A review of newspaper articles published during the past several years was conducted in order to assess public perceptions of vehicle headlamps in terms of their ability to support visibility and their impacts on headlamp glare.

Although adaptive driving beam headlight systems are not presently defined in North American headlighting standards, evidence for the potential safety benefits of these systems is increasing. Field measurements of the photometric performance of an adaptive driving bean system were made in response to simulated headlight and tail light conditions. Roadway geometries were varied and multiple measurements for many conditions were made to assess repeatability of measurements. The results of the testing are summarized in the context of validating the likely safety impacts of these systems and of providing recommendations for standardized measurement conditions to ensure reliability.

Discomfort glare while driving at night might have implications for long-term fatigue and ultimately, driving performance and safety. The intensity of oncoming headlights, their spectral power distribution, the location of the lights in the field of view, and the ambient illumination conditions can all impact feelings of discomfort while driving at night. Not surprisingly, light sources with higher intensities are perceived as more glaring. Similarly, perceptions of discomfort increase as the ambient lighting conditions are reduced, and as the glare sources are located closer to the line of sight. Recent research also appears to demonstrate the role of short-wavelength light in contributing to the discomfort glare response. The present paper outlines a laboratory study to probe the effects of ambient light level, spectral power distribution, and control of gaze on discomfort glare, and potential interactions among these factors.

Warning lights and beacons on service vehicles such as maintenance trucks, tow trucks, utility service vehicles and delivery vehicles are an important line of defense for the workers who operate them. These flashing lights can also contribute to visual chaos making it difficult to navigate through a work zone location. Research on the flashing configuration and spatial and temporal coordination of warning lights that could adapt to ambient conditions and situations is described, leading to recommendations for preliminary performance specifications

Workers in construction and transportation sectors are at increased risk for work-related injuries and fatalities by nearby traffic. Barricade-mounted warning lights meeting current specifications do not always provide consistent and adequate visual guidance to drivers and can contribute to glare and reduced safety. Through an implementation of sensors and wireless communications, a novel, intelligent set of warning lights and a tablet-based interface were developed. The lights modulate between 100% and 10% of maximum intensity rather than between 100% and off in order to improve visual guidance and adjust their overall intensity based on ambient conditions. The lights can be synchronized or operated in sequential flash patterns at any frequency between 1 and 4 Hz, and sequential patterns automatically update based on global positioning satellite (GPS) locations displayed in the control interface.

Rear automotive lighting systems employing dynamic features such as sweeping or flashing are not commonly used on vehicles in North America, in part because they are not clearly addressed in vehicle lighting regulations. Nor is there abundant evidence suggesting they have a substantial role to play in driver safety. The results of a human factors investigation of the potential impacts of dynamic rear lighting systems on driver responses are summarized and discussed in the context of safety, visual effectiveness and the present regulatory context.

The advent of light-emitting diode (LED) technology for automotive lighting allows flexibility of the spectral distribution of forward headlighting systems, while meeting current requirements for “white” illumination. As vehicle headlights have become whiter (with more short-wavelength light output) over the past several decades, their potential impacts on visual discomfort for oncoming and preceding drivers have been hotly debated. It is known that a greater proportion of short-wavelength energy increases discomfort glare, and that increasing the background light level (e.g., through roadway lighting) will decrease perceptions of discomfort. More recently it has been demonstrated that the visual system exhibits enhanced short-wavelength sensitivity for perceptions of scene brightness.

Transportation safety agencies are working to consider how to best incorporate the potential safety benefits of intelligent vehicle lighting systems such as adaptive driving beam headlights and other systems on vehicles used by the general public. As these deliberations continue, additional data on the impacts of lighting technological developments are important to generate and share. An analytical study was performed to assess how different vehicle lighting configurations including ADB and other technologies can assist drivers in achieving visual acquisition of potential hazards along the road. The investigation also compared drivers varying in age and whose visual performance differs because of optical changes in the visual system. The importance of considering visibility for older drivers is critical because this group is an increasingly large proportion of the overall driving population.

The current development of automotive lighting strives towards more and more lighting installations on vehicles. Additionally, to that, manufacturers start animating these lighting installations as coming home or leaving home greetings from the car to the driver. In a previous paper we have shown, that these additional animations are in fact not distracting to other road users and when used correctly, e.g. in a sequential turn indicator, can be beneficial to the overall traffic safety. This study then aims to investigate the potential influence of illuminated logos on road safety. European lawmakers forbid the use of illuminated advertisements on vehicles to minimize the danger of distraction for other road users and thereby negatively influencing traffic safety. As of now, active illumination of the manufacturer’s logo is considered an advertisement.

Vehicle forward lighting can use a multiplicity of light sources each varying in their spectral characteristics. Present standards for low beam headlight performance also allow variability in the peak intensities that drivers can be exposed to, as well as the durations of those exposures. Previous research has led to mixed results regarding whether the spectral distribution of a headlight source influences the length of time the visual system needs to recover the ability to see objects that might present hazards along the roadway. One recent study showed that the integrated light dose (intensity × duration) but not the spectral distribution impacted recovery times for targets presented in a constant, known location, where they would be viewed with the fovea. An experiment was carried out to assess whether the spectral distribution of a glare source might differentially impact one's ability to see a target using peripheral vision when the location of the target is not known.

To ensure adequate visibility without excessive glare, vehicle headlights are designed to use a specific source of illumination. The optical designs of headlights gather the luminous flux produced by the light source to produce a useful beam pattern that meets the relevant requirements and standards for vehicle forward lighting. With the advent of solid state, light emitting diode sources for general illumination, an increasing number of LED replacement headlight bulb products has emerged over the past decade. In most cases, these LED replacement bulbs are not permitted for legal use on public roadways, but some countries have begun to permit specific LED replacement bulbs to be used legally on the road for specific makes, models and production years of certain vehicles. If they can be demonstrated to produce a beam pattern that meets the photometric requirements for a legal headlight, they are permitted to be used legally for on-road use.