Search Results

The purpose of this standard is to provide a source of definitions of terms and acronyms commonly used in the air transport maintenance community for test and evaluation with an emphasis on terms applicable to BITE.

The amount of software, computation and logic embedded into the vehicle systems is increasing. Testing of complex real time embedded systems using Hardware in Loop (HIL) simulations across different vehicle platforms has been a challenge. Data driven testing enables a qualitative approach to test these complex vehicle systems. It consists of a test framework wherein the test logic and data are independent of the HIL test environment. The data comprises variables used for both input values and output verification values. This data is maintained in a database or in the form of tables. Each row defines an independent test scenario. The entire test data is divided into three categories, High, Medium and Low. This feature gives the advantage of leveraging the same set of test data from Unit Level Testing phases to the Integration Test phase in the V-Cycle of software development. A data driven test approach helps the reuse of tests across vehicle platforms.

The System Architecture Virtual Integration (SAVI) program is a collaboration of industry, government, and academic organizations within the Aerospace Vehicle System Institute (AVSI) with the goal of structuring a new integration process that relies on a single-truth architectural framework. The SAVI approach of Integrate, then Build provides a modern distributed development environment which arrests the propagation of requirements errors through the development life cycle. It does so by capturing design assumptions and shared properties of the system design in an authoritative, annotated architectural model. This reference model provides a common, analyzable framework for confirming that system requirements remain complete, consistent, and correct at all levels of system decomposition. Core concepts of SAVI include extensive use of model-based system engineering tools and use of a single-truth reference architectural model.

Plug-In Hybrid and Extended Range Electric Vehicle's have quickly become the focus of many OEM's and suppliers. Existing regulations and test procedures did not anticipate this rapid adoption of this new technology, resulting in many product development challenges. The lack of clear requirements is further complicated by CARBs consideration of CO2 inclusion in their next light duty OBD regulation. This presentation provides an overview of the regulatory requirements for OBD systems on hybrid vehicles that intend to certify in California. Near term challenges for EREV?s and PHEV?s are discussed, including concerns with the existing denominator and warm-up cycle calculations. Some proposals are made to address these concerns. Presenter Andrew Zettel, General Motors Company

This presentation shows the SCADE System product line for systems modeling and generation based on the SysML standard and the Eclipse Papyrus open source technology. SCADE System has been developed in the framework of Listerel, a joint laboratory of Esterel Technologies, provider of the SCADE�, and CEA LIST, project leader of the Eclipse component, Papyrus. From an architecture point of view, the Esterel SCADE tools are built on top of the SCADE platform which includes both SCADE Suite�, a model-based development environment dedicated to critical software, and SCADE System enabling model-based system engineering. SCADE System includes Papyrus, an open source component (under EPL license), integrated in the modeling platform of Eclipse. Using this integrated modeling platform, both system and software teams share the same environment for system development. Furthermore, other model-based tools can be added to the environment, due to the use of Eclipse.

The development and release process for Cummins first US HD OBD certified product encountered numerous hurdles. Beyond the purely "technical" difficulties, there were also challenges related to our product development processes. This presentation provides recommendations for HD OBD product development processes & improvements. Topics will include: Training needs for program management, Performance tuning strategies vs. OBD needs, Planning for post-certification product changes, etc. Presenter Greg Moore, Cummins Inc.

This paper presents an extension of our earlier work on Cummins Vehicle Mission Simulation (VMS) software. Previously, we presented VMS as a Windows based analysis tool to simulate vehicle missions quickly and to gauge, communicate, and improve the value proposition of Cummins engines to customers. Presenter Nagesh Belludi, Cummins Inc.

Meet the engineers shaping the world of mobility and driving the future of engineering.

“Spotlight on Design” features video interviews and case study segments, focusing on the latest technology breakthroughs. Viewers are virtually taken to labs and research centers to learn how design engineers are enhancing product performance/reliability, reducing cost, improving quality, safety or environmental impact, and achieving regulatory compliance. Fuel efficiency, or simply put, how to get more mileage out of the same amount of fuel has become one of the main goals to be achieved by new automotive technologies in the future, thanks in part to new government regulations. In the episode “Fuel Efficiency: Racing toward CAFE 2025” (21:24) AVL engineers show simulation and testing being used to design more fuel efficient vehicles, including the equipment that actually analyzes fuel economy.

ISO 26262 is the first comprehensive automotive safety standard that addresses the safety of the growing number of electric/electronic and software intensive features in today's road vehicles. This paper assesses the standard's ability to provide safety assurance. The strengths of the standard are: (1) emphasizing safety management and safety culture; (2) prescribing a system engineering development process; (3) setting up a framework for hazard elimination early in the design process; (4) disassociating system safety risk assessment from component probabilistic failure rate. The third and fourth strengths are noteworthy departure from the philosophy of IEC61508. This standard has taken much-needed and very positive steps towards ensuring the functional safety of the modern road vehicles. SAE publications from industry show a lot of enthusiasm towards this standard.

Future fuel economy targets represent a significant challenge to the automotive industry. While a range of technologies are in research and development to address this challenge, they all bring additional cost and complexity to future products. The most cost effective solutions are likely to be combinations of technologies that in isolation might have limited advantages but in a systems approach can offer complementary benefits. This presentation describes work carried out at Ricardo to explore Intelligent Electrification and the use of Stratified Charge Lean Combustion in a spark ignition engine. This includes a next generation Spray Guided Direct Injection SI engine combustion system operating robustly with highly stratified dilute mixtures and capable of close to 40% thermal efficiency with very low engine-out NOx emissions.

The 15 papers in this technical paper collection addresses automotive requirements, high level system design, cost analysis, simulation, modeling, esting, and validation. System includes components, sub-assemblies, computer based controllers, hardware and software.

This technical paper collection addresses automotive requirements, high level system design, cost analysis, simulation, modeling, testing, and validation. System includes components, sub assemblies, computer based controllers, hardware and software. The session focuses on intelligent and efficient approaches to analysis, design (not detailed design), modeling, measurement, document management and optimizing performance. Topics on effect of cost, and human machine interface are covered.

This technical paper collection will cover various aspects of system durability and system integration pertaining to Diesel Exhaust Emissions Control. It includes publications contributing to the understanding of durability of exhaust catalysts and particulate filters, mechanisms of their performance degradation and possible mitigation strategies, data from the field tests, analysis of the aged catalysts, laboratory and accelerated on-engine aging studies, along with relevant experimental tools and methodology.

This technical paper collection covers intelligent and efficient approaches to high level system design, analysis and integration as well as considerations for vehicle-level optimization of cost and energy. System definition includes components, sub-assemblies and complete integrated vehicle systems, including electronic systems and human machine interfaces.

Enhanced License for Data Dictionary for Quantities Used in Cyber Physical Systems (AS6969B) allowing for greater usage as outlined in the terms of the Enhanced License. Terms can be reviewed prior to purchase once item is added to the cart. Data Dictionary for Quantities Used in Cyber Physical Systems (AS6969B) This data dictionary provides definitions for quantities commonly used in the command and control of cyber physical systems. It defines mathematical and logical terms, quantities, measurement units, reference systems, measurands, and measurements. It also defines common quantity modalities. The dictionary is structured to be convenient to data modelers. It is also extendable so that users can create their own quantity domains.

Enhanced License for Data Dictionary for Quantities Used in Cyber Physical Systems (AS6969) allowing for greater usage as outlined in the terms of the Enhanced License. Terms can be reviewed prior to purchase once item is added to the cart. Data Dictionary for Quantities Used in Cyber Physical Systems (AS6969) This data dictionary provides a mathematically coherent set of definitions for quantity types used in data models for unmanned systems. In this data dictionary, a quantity is defined as a property of a phenomenon, substance, or body whose value has magnitude.

Enhanced License and UML Model for Data Dictionary for Quantities Used in Cyber Physical Systems (AS6969) allowing for greater usage as outlined in the terms of the Enhanced License. Data Dictionary for Quantities Used in Cyber Physical Systems (AS6969A) This data dictionary provides definitions for quantities commonly used in the command and control of cyber physical systems. It defines mathematical and logical terms, quantities, measurement units, reference systems, measurands, and measurements. It also defines common quantity modalities. The dictionary is structured to be convenient to data modelers. It is also extendable so that users can create their own quantity domains.

Abstract The vehicle attributes developed for emerging markets like India are unique because of different topographical conditions, diversity and culture within the different states. Major attributes in vehicle development process is development of safe and sustainable vehicle systems (steering, brakes etc.) for the driver. India is presently an emerging market for automotive sector. With booming economy, purchasing power of the consumer has gone up in the past few years. Most of young population of India have started buying the cars. At the same time, India’s road infrastructure, vehicle regulations have exalted over the years. The consumer cognizance towards the vehicles have started changing now. They want safer, robust system in their vehicles with new convenience features at affordable cost. In recent years, almost all OEM’s in India have migrated steering systems from HPAS to EPAS for payback on fuel economy and weight.