Search Results

Limited to the Aerospace industry where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process the approved manufacturer is responsible for assurance that the article conforms to Type Design information.

The aviation, space, and defense industries rely on the development and manufacture of complex products comprised of multiple systems, subsystems, and components each designed by individual designers (design activities) at various levels within the supply chain. Each design activity controls various aspects of the configuration and specifications related to the product. When a change to design information is requested or required, the change has to be evaluated against the impacts to the higher-level system. Proposed changes to design information that the design activity identifies to be minor and have no effect on their product requirements or specifications have the potential to be concurrently implemented and approved, where authorized to do so. Changes that affect customer mandated requirements or specifications must be approved prior to implementation.

The aviation, space, and defense industries rely on the development and manufacture of complex products comprised of multiple systems, subsystems, and components each designed by individual designers (design activities) at various levels within the supply chain. Each design activity controls various aspects of the configuration and specifications related to the product. When a change to design information is requested or required, the change has to be evaluated against the impacts to the higher-level system. Proposed changes to design information that the design activity identifies to be minor and have no effect on their product requirements or specifications have the potential to be concurrently implemented and approved, where authorized to do so. Changes that affect customer mandated requirements or specifications must be approved prior to implementation.

This document describes requirements for standardized processes (and associated technologies) that ensure type design data are retrievable and usable for the life of a type certificate (50+ years). These processes are primarily concerned with, but not limited to, digital type design data retained in three-dimensional representations and associated data that is required for complete product definition, such as tolerances, specification call-outs, product structure and configuration control data, etc. This process standard includes process requirements for managing the evolution of technologies required to ensure the availability of the data for the life of the product. This data must be available to meet regulatory, legal, contractual and business requirements. This process standard is not intended to incorporate every company specific requirement and does not dictate specific organizational structures within a company.

This document describes requirements for standardized processes (and associated technologies) that ensure type design data are retrievable and usable for the life of a type certificate (50+ years). These processes are primarily concerned with, but not limited to, digital type design data retained in three-dimensional representations and associated data that is required for complete product definition, such as tolerances, specification call-outs, product structure and configuration control data, etc. This process standard includes process requirements for managing the evolution of technologies required to ensure the availability of the data for the life of the product. This data must be available to meet regulatory, legal, contractual and business requirements. This process standard is not intended to incorporate every company specific requirement and does not dictate specific organizational structures within a company.

This document is intended to prescribe consistent requirements for CSI management for organizations and suppliers who perform work for prime contractors receiving direct contracts from U.S. government agencies (i.e., first-tier or prime suppliers).

This SAE Aerospace Standard (AS) further defines the requirements for a delegation process identified in Aerospace Quality Management System (AQMS) standards (i.e., AS9100, AS9110, AS9120). This standard establishes minimum requirements for the delegation of product verification to an organization’s suppliers; outlining requirements for the initial delegation (qualification/selection), maintenance, and removal/withdrawal of delegations.

This Standard defines uniform Quality and Technical requirements relative to metallic parts marking performed in using "Data Matrix symbology" (2D) coding used within the aerospace industry. The ISO 16022 specifies general requirements (data characters encodation, error correction rules, decoding algorithm, etc.). In addition to this specification, part Identification with such coding is subject to the following requirements to ensure electronic reading (scanning) ability of the symbol. The marking processes covered by this standard are as follows: Dot Peening Laser Marking Electro-Chem Etching Further marking processes will be included if required. Unless specified otherwise in the contractual business relationship, the company responsible for the design of the part shall determine the location of the Data Matrix Marking. Symbol position should allow illumination from all sides for readability.

This SAE Aerospace Standard (AS) defines uniform Quality and Technical requirements relative to metallic parts marking performed in using "Data Matrix symbology" used within the aerospace industry. The ISO/IEC 16022 specifies general requirements (data character encodation, error correction rules, decoding algorithm, etc.). In addition to ISO/IEC 16022 specification, part identification with such symbology is subject to the following requirements to ensure electronic reading of the symbol. The marking processes covered by this standard are as follows: Dot Peening Laser Electro-Chemical Etching Further marking processes will be included if required. This standard does not specify information to be encoded. Unless specified otherwise in the contractual business relationship, the company responsible for the design of the part shall determine the location of the Data Matrix Marking. Symbol position should allow optimum illumination from all sides for readability.

This SAE Aerospace Standard (AS) establishes documentation requirements for the First Article Inspection (FAI).

This document provides the minimum requirements (Body of Knowledge) for AQMS auditors who will participate in AQMS certification/registration activities, including the auditor authentication process and requirements for a training organization. It is applicable to auditors seeking formal approval to conduct audits of the AQMS in support of the IAQG, and those who manage the competency element of an AQMS audit program and/or training organizations.

This document defines to supplier/subcontractor common information and documentation required to inform Customers, when applicable about nonconformity (Customer-provider use). It does not apply to the reporting of a nonconformity to the product owner/operator. Reporting of Product Quality Escapes and use of Waiver/Concession is subject to the terms and conditions of the contractual requirements.

Limited to the aerospace industry, where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process the approved manufacturer is responsible for assurance that the article conforms to type design information.

Limited to the Aerospace industry where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process the approved manufacturer is responsible for assurance that the article conforms to Type Design information.

This document is limited to the aerospace industry, where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process, the approved manufacturer is responsible for assurance that the article conforms to type design information.

This standard specifies requirements for DPRV to establish common product/service requirements for use at all levels of the supply chain. This standard shall apply when an organization elects to delegate product release verification by contractual flow down to their supplier (reference 9100 and 9110 standards); to perform product acceptance on their behalf. The delegating organization shall use this standard as the baseline for establishing a DPRV process, although they may include additional contract requirements to meet their specific needs.

This document provides a basic uniform method for ensuring that aerospace standard parts (products) conform with the requirements of technical specifications referring to qualified parts and for a manufacturer of such parts to have a qualified management system at least equivalent to AS/EN/SJAC9100. These standards apply when called out in the aerospace standard part standard.

This document contains the minimum requirements for supplier Inspection and Test Quality System. It is emphasized that the quality system requirements specified in this standard are complementary (not alternative) to the contractual and applicable law and regulatory requirements.

This SAE Aerospace Standard (AS) establishes requirements for performing and documenting the First Article Inspection (FAI).

This standard establishes the baseline requirements for performing and documenting FAI. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the applicable statutory or regulatory requirements shall take precedence.