Search Results

Accurate estimation of the State of Charge (SOC), maximum capacity (Qmax) and internal resistance (R0) are essential for efficient battery monitoring, which is an important part of the battery management system. SOC provides information regarding the instantaneous status of the battery system, while Qmax is a key indicator of the long-term State of Health (SOH) of the cell, which represents the abilities of a battery to store energy and retain charge over extended periods. In addition, the internal resistance is also required to predict the peak available power. Traditional methods use complex models and look-up tables that have high computation requirements and are thus unsuitable for online applications. In this paper, we propose a simple method for simultaneous SOC, Qmax and internal resistance estimation based on a second-order equivalent circuit model (ECM).

This study analyzes the performance of the Energy Recovery System (ERS) of a Formula One car (F1) based on the qualification performance of 19 drivers for the first calendar race of the 2019 FIA Formula One World Championship®. In this study, the race circuit analysed was split into different sectors to examine the energy transfer between the Motor Generator Unit-Kinetic (MGU-K) and the Energy Storage (ES) systems. Positive Kinetic Energy (PKE) concept was used for estimating the energy deployment potential of the ERS along with numerical simulations for estimating the energy recovering potential. This investigation highlights the strategies used by different drivers and the effect of driver to driver variation on their ERS performance during qualification. The methodology demonstrated in this study is able to identify the correlation between the unique driving style of individual drivers and the ERS strategies used by the teams for maximizing the performance of their car.

This paper presents theoretical and experimental analyses used to evaluate the behavior of a capacitor-based hybrid source while supplying a pulsed current load. A PEM fuel cell and a variety of battery types were tested in the laboratory for their capability to supply a pulsed load. The capacitors used during testing were found to be effective in reducing the fuel cell/battery current. Experimental test results show that using low-ESR capacitors can reduce voltage deviations. Test results also show that a capacitor-based hybrid is a promising power source for supplying a pulsed current load.

Many lightweight vehicles use non-ventilated (also called vane-less or solid) iron alloy rotors in their vehicle braking systems both on the front and rear wheels. This solid rotor configuration is also common on the rear wheels of many full size production vehicles. This paper's object is to identify the heat transfer coefficients of such a solid brake disc arrangement using different experimental methods and then show how this information can be used both as a design tool and a simulator to predict temperatures in unknown or untested conditions.

Analysis of thermal behavior of Lithium ion battery is one of crucial issues to ensure a safe and durable operation. Temperature is the physical quantity that is widely used for analysis, but limited for accurate investigations of behavior of heat generation of battery because of sensitivities affected by heat transfer in experiments. Calorimeter available commercially is widely used to measure the heat generation of battery, but does not follow required dynamics because of a relatively large thermal time constant given by cavity and a limited heat transfer capability. In this paper, we proposed a highly dynamic calorimeter that was constructed using two thermoelectric devices (TEMs). For the design of the calorimeter and its calibration, a printed circuit board (PCB) with the same size as the battery was used as a dummy load to generate controlled heat.

In-cylinder surface temperature is of heightened importance for Homogeneous Charge Compression Ignition (HCCI) combustion since the combustion mechanism is thermo-kinetically driven. Thermal Barrier Coatings (TBCs) selectively manipulate the in-cylinder surface temperature, providing an avenue for improving thermal and combustion efficiency. A surface temperature swing during combustion/expansion reduces heat transfer losses, leading to more complete combustion and reduced emissions. At the same time, achieving a highly dynamic response sidesteps preheating of charge during intake and eliminates the volumetric efficiency penalty. The magnitude and temporal profile of the dynamic surface temperature swing is affected by the TBC material properties, thickness, morphology, engine speed, and heat flux from the combustion process. This study follows prior work of authors with Yttria Stabilized Zirconia, which systematically engineered coatings for HCCI combustion.

AC impedance measurements have been taken for five different double-layer capacitors (DLCs) operating at different DC bias levels. Using these measurements, circuit parameters for different DLC equivalent circuits have been determined. The effect of DC bias on the circuit parameters has been investigated. Variations in manufacturing were also examined. Equivalent circuit parameters were calculated for a small group of 50F DLCs and then compared. The equivalent circuit parameters varied about 10% over the sample set.

Thermal barrier coatings with low conductivity and low heat capacity have been shown to improve the performance of homogeneous charge compression ignition (HCCI) engines. These coatings improve the combustion process by reducing heat transfer during the hot portion of the engine cycle without the penalty thicker coatings typically have on volumetric efficiency. Computational fluid dynamic simulations with conjugate heat transfer between the in-cylinder fluid and solid piston of a single cylinder HCCI engine with exhaust valve rebreathing are carried out to further understand the impacts of these coatings on the combustion process. For the HCCI engine studied with exhaust valve rebreathing, it is shown that simulations needed to be run for multiple engine cycles for the results to converge given how sensitive the rebreathing process is to the residual gas state.

A feature of Baja SAE, and other off-road racing series, is a dynamic traction event. Usually some sort of pull-test device is towed in this event, and design of this device has a controlling influence on the performance capability of each vehicle in the field. Pull-test devices are usually designed to be progressive so that starting is easy, but the pulled load gets higher the further the tow proceeds. Pull-test devices must also be mechanically designed to suit the efficient operation of the traction event (hitching and resetting). This paper develops the operating and design theory of a new pull-test device, the log pull.

A comprehensive multi-physics theoretical model of the solenoid valve used in an automobile transmission is constructed using the finite element method. The multi-physics model includes the coupled effects of electromagnetic, thermodynamics and solid mechanics. The resulting finite element model of the solenoid valve provides useful information on the temperature distribution, mechanical and thermal deformations, and stresses. The model results predict that the solenoid valve is susceptible to a coupled electrical-thermo-mechanical failure mechanism. The coil can generate heat which can cause compressive stress and high temperatures that in turn could fail the insulation between the coil wires. The model facilitates the characterization of the solenoid valve performance, life and reliability and can be used as a predictive tool in future solenoid design.

Despite the widespread adoption of lithium-ion batteries in various applications such as energy storage, concerns related to thermal management have been persisting, primarily due to the heat generated during their operation and the associated adverse effects on its efficiency, safety, and lifetime. Hence, the thermal characterization of lithium-ion batteries is essential for optimizing the layout of the battery cells for a pack design and the corresponding thermal management system. This study focuses on an experimental investigation of heat generation of Li-ion batteries under different operating conditions, including charge-discharge rates, ambient temperatures, states of charge, and compressive pressure. The experiments were conducted using a custom-designed multifunctional calorimeter, enabling precise measurement of the heat generation rate of the battery and the entropy coefficient. The measured results have shown a good match with the calculated heat generation rate.