Search Results

The Maryland Advanced Research/Simulation (MARS) Suit is designed to be a low-cost test bed for extravehicular activity (EVA) research, providing an environment for the development and application of biomedical sensors and advanced EVA technologies. It is also designed to be used in gaining more experience with human-telerobotic interactions in an integrated EVA worksite. This paper details the first generation MARS Suit (MX-1) design, describes the low-cost development process, and presents results from ongoing suit testing, as well as plans for future work.

The University of Maryland Space Systems Laboratory has developed a system that replicates some limited aspects of pressure suits to facilitate neutral buoyancy research into EVA bioinstrumentation, advanced EVA training, and EVA/robotic interactions. After a two year upgrade from its MX-1 predecessor, the MX-2 space suit analogue is currently undergoing a variety of system integration tests in preparation for initial operational testing, leading to routine use for EVA simulation and as a testbed for advanced space suit technology. The MX-2 is built around a hard upper torso with integrated hemispherical helmet and rear-entry hatch. Three-layer soft-goods are used for the arms and lower torso, while an open loop air system regulates suit pressure to 3 psid. Wrist disconnects allow the use of standard EMU or Orlan gloves, or experimental gloves such as the mechanical counterpressure gloves and power-assisted gloves developed previously by the SSL.

With NASA's resources dedicated to the six-fold increase in extravehicular operations required for the construction of International Space Station, there are few or no opportunities to conduct neutral buoyancy research which requires the use of pressure suits. For this reason, the University of Maryland Space Systems Laboratory has developed a system which replicates some limited aspects of pressure suits to facilitate neutral buoyancy research into EVA bioinstrumentation and EVA/robotic interactions. The MX-2 suit analogue is built around a hard upper torso with integrated hemispherical helmet and rear-entry hatch. Three-layer soft goods (pressure bladder, restraint layer, and thermal/micrometeoroid garment with integral ballast system) are used for the arms and lower torso.

Neutral buoyancy (NB) and parabolic flight (PF) are the only presently available human-scale three-dimensional spaceflight simulation environments, and as such, both NB and PF are used extensively to simulate spaceflight conditions for both research and mission operations purposes. However, there is little or no quantitative (or even qualitative) material in the literature to characterize the fidelity of either environment to its analog. The present study was undertaken as part of a larger research effort to begin to build such characterizations. Eight healthy adults (4 men and 4 women) were asked to adopt relaxed postures while “standing” in space shuttle middeck standard-type foot restraints, in NB and during the 0g periods of PF. Subjects were tested in NB in 9 orientations, 3 trials each: Upright; tilted 45° Front, 45° Back, 45° Right, 45° Left; tilted 90° Front, 90° Back, 90° Right, and 90° Left.

In the present study, 8 experienced neutral buoyancy test divers were instructed to maintain quiet relaxed posture while ‘standing’ in instrumented space shuttle middeck (IVA) type foot restraints in the Space Systems Laboratory (SSL) Neutral Buoyancy Research Facility (NB) and onboard the NASA KC-135 reduced gravity aircraft (PF). Foot restraint reaction loads and subject joint angles were recorded during blind and sighted conditions. Visual cues played a significant role in subject anxiety onboard the KC; however, while subject joint angles and reaction loads differed between NB and PF conditions, no differences were found between sighted and blind conditions in either simulation environment for reaction loads or joint angles. This very surprising result indicates that there are not only anecdotal but concrete differences between reduced gravity and terrestrial posture mechanisms.

The hybrid elastic design is based upon an American Society for Engineering Education (ASEE) glove designed by at the Space Systems Laboratory (SSL) in 1985. This design uses an elastic restraint layer instead of convolute joints to achieve greater dexterity and mobility during EVA (extravehicular activity). Two pilot studies and a main study were conducted using the hybrid elastic glove and a 4000-series EMU (extravehicular activity unit) glove. Data on dexterity performance, joint range of motion, grip strength and perceived exertion was assessed for the EMU and hybrid elastic gloves with correlations to a barehanded condition. During this study, 30 test subjects performed multiple test sessions using a hybrid elastic glove and a 4000-series shuttle glove in a 4.3psid pressure environment. Test results to date indicate that the hybrid elastic glove performance is approximately similar to the performance of the 4000-series glove.

Since the earliest days of manned space flight, robotics and human activities have tended to view each other as the competition. Although the International Space Station lists robotic servicing as an alternative to extravehicular activity (EVA) operations, there has been little consideration of significant cooperation between humans and telerobots in the same work site. This paper proposes the establishment of a list of potential interaction levels between humans and robots in the extravehicular work site: Robotic assistant Robotic associate Robotic surrogate Robotic specialist Human/robotic symbiosis The first three categories deal with increasing levels of robotic capability to perform EVA tasks, particularly with EVA interfaces. “Specialist” activities refer to specific task assignments that are singularly associated with humans or robots, such as an Astronaut Support Vehicle or a Telerobotic Rescue System for EVA.

The MX-2 neutral buoyancy space suit analogue has been designed and developed at the University of Maryland to facilitate analysis of space suit components and assessment of the benefits of advanced space suit technologies, The MX-2 replicates the salient features of microgravity pressure suits, including the induced joint torques, visual, auditory and thermal environments, and microgravity through the use of neutral buoyancy simulation. In this paper, design upgrades and recent operations of the suit are outlined, including many experiments and tests of advanced space suit technologies, This paper focuses on the work done using the MX-2 to implement and investigate various advanced controls and displays within the suit, to enhance crewmember situational awareness and effectiveness, and enable human-robotic interaction.

There has recently been an increasing focus on humans working cooperatively with robotic systems in space exploration and operations. Considerable work has been performed on distributed architectures to enable such interaction. The research described here looks at the human-robot interaction from the EVA astronaut's perspective, describing a first generation human-machine interface implemented and tested on an existing experimental spacesuit analog, the MX-2. The ultimate goal is to enable EVA astronauts to operate more independently of remote operators and work effectively with autonomous and teleoperated robots. The current system integrates speech interaction and visual interfaces as a first step towards this goal.

The fit of a spacesuit has been identified as a crucial factor that will determine its usability. Therefore, because one-size-fits-all spacesuits seldom fit any wearer well, and because individually tailored spacesuits are costly, the University of Maryland has conducted research into a resizable Extravehicular Activity (EVA) suit. This resizing is accomplished through a series of cable-driven parallel manipulators, which are used to adjust the distance between plates and rings built into a soft space suit. These actuators, as well as enabling passive suit resizing, could be used to actively assist the astronaut's motion, decreasing the torques that must be applied for movement in a pressurized suit. This paper details the development and testing of an arm prototype, which is used to better understand the dynamics of a more complex torso-limb system.

The next generation of pressure suits must enable large-scale planetary Extra-Vehicular Activities (EVA). Astronauts exploring the moon and Mars will be required to walk many kilometers, carry large loads, perform intricate experiments, and extract geological samples. Advanced pressure suit architectures must be developed to allow astronauts to perform these and other tasks simply and effectively. The research developed here demonstrates integration of robotics technology into pressure suit design. The concept of a robotically augmented pressure suit for planetary exploration has been developed through the use of analytical and experimental investigations. Two unique torso configurations are examined, including a Soft/Hard Upper Torso with individually adjustable bearings, as well as advances in Morphing Upper Torso research, in which an all-soft torso is analyzed as a system of interconnected parallel manipulators.

This paper summarizes the activities of the University of Maryland Space Systems Laboratory in performing a design study for a minimum functionality lunar habitat element for NASA's Exploration Systems Mission Directorate. By creating and deploying a survey to personnel experienced in Earth analogues, primarily shipboard and Antarctic habitats, a list of critical habitat functions was established, along with their relative importance and their impact on systems design/implementation. Based on a review of relevant past literature and the survey results, four habitat concepts were developed, focused on interior space layout and preliminary systems sizing. Those concepts were then evaluated for habitability through virtual reality (VR) techniques and merged into a single design. Trade studies were conducted on habitat systems, and the final design was synthesized based on all of the results.

Performance of new space suit designs is typically tested quantitatively in laboratory tests, at both the component and integrated systems levels. As the suit moves into neutral buoyancy testing, it is evaluated qualitatively by experienced subjects, and used to perform tasks with known times in earlier generation suits. This paper details the equipment design and test methodology for extended space suit performance metrics which might be achieved by appropriate instrumentation during operational testing. This paper presents a candidate taxonomy of testing categories applicable to EVA systems, such as reach, mobility, workload, and so forth. In each category, useful technologies are identified which will enable the necessary measurements to be made. In the subsequent section, each of these technologies are examined for feasibility, including examples of existing technologies where available.

Space suit design has been limited to evolutionary steps since the first pressure suit was developed in 1934. While this development process has improved the fit to the wearer, it is still common to measure the performance of a pressure suit by identifying what fraction of shirtsleeve capability it allows. Given sufficient government and commercial support, space could in the future be an expanding realm of commercial and exploration activities, including return to the moon and human Mars exploration, with requirements for extravehicular activity orders of magnitude beyond the maximum envisioned for the International Space Station era. In such an environment, the need for breakthrough technology is to make the space suit into an augmentation of the human wearer, rather than an impediment.

The University of Maryland has performed a detailed design for the space equivalent of an atmospheric diving suit. The Space Construction and Orbital Utility Transport (SCOUT) is a small single-person spacecraft, with all necessary utilities for extended sorties away from the host station. Through a pair of AX-5 style space suit arms integrated into the cabin wall, as well as a trio of dexterous manipulators, the SCOUT operator can directly interact with the work site environment, performing spacecraft servicing, structural assembly, or other tasks traditionally done by an astronaut in a space suit. Originally designed as an augmentation to the NASA Gateway station architecture for the Earth-Moon L1 system, studies indicate that a SCOUT-type EVA system would represent a substantial benefit to International Space Station operations as well.

Neutral buoyancy (NB) and parabolic flight (PF) are the only available human-scale three-dimensional spaceflight simulation environments. As such, both environments are used extensively for both research and mission operations purposes despite a lack of quantitative (or even qualitative) characterization of the fidelity of either environment to the spacelfight analog. The present study was undertaken as part of a larger research effort to begin to build such characterizations. Eight healthy adults (4 men and 4 women) were asked to adopt relaxed postures while ‘standing’ in space shuttle middeck standard-type foot restraints, in NB and during the 0g periods of PF. Subjects were tested in NB in 9 orientations, 3 trials each: Upright; tilted 45° Front, 45° Back, 45° Right, 45° Left; and tilted 90° Front, Back, Right, and Left. PF limitations prohibited 90° testing; consequently the PF test protocol included only Upright and 45° orientations.

A fully operational space suit analogue for use in a neutral buoyancy environment has been developed and tested by the University of Maryland’s Space Systems Laboratory. Repeated manned operations in the Neutral Buoyancy Research Facility have shown the MX-2 suit analogue to be a realistic simulation of operational EVA pressure suits. The suit is routinely used for EVA simulation, providing reasonable joint restrictions, work envelopes, and visual and audio environments comparable to those of current EVA suits. Improved gloves and boots, communications carrier assembly, in-suit drink bag and harness system have furthered the semblance to EVA. Advanced resizing and ballasting systems have enabled subjects ranging in height from 5′8″ to 6′3″ and within a range of 120 lbs to obtain experience in the suit. Furthermore, integral suit instrumentation facilitates monitoring and collection of critical data on both the suit and the subject.

Future space missions will involve humans and robots cooperatively performing operational tasks in various team combinations. Part of the required preparation for such missions includes understanding the issues involved in task allocation between disparate agents, and efficiently ordering tasks within the mission constraints. The scheduling tool developed in this research distributes pre-allocated task primitives between a cooperative human crew and dexterous robotic team. It combines real-world precedent constraints with algorithms from scheduling theory to reorder and tighten each crew member's individual schedule. The schedules minimize astronaut involvement time by stacking astronaut-performed tasks together in the schedule. This also minimizes astronaut workload in the completion of each task. Hubble Space Telescope Servicing Mission 3A was used as an example to test the allocation and scheduling tool.

Past approaches to space suit glove evaluation have primarily been subjective. This report details efforts at the University of Maryland Space Systems Laboratory to use standardized dexterity tests and advanced biomechanics instrumentation to provide objective measures of glove performance. Ten subjects participated in the study. Tests were conducted barehanded, and wearing pressurized and unpressurized space suit gloves. Data on performance time, range of motion, dexterity, strength, fatigue, and comfort were collected. Range of motion data was measured using an experimental data glove that instrumented the movement of the joints of the right hand. The results indicated that performance time wearing pressurized gloves is not adequately estimated by performance wearing unpressurized gloves. Also, joint angle results indicated a decrease in the range of motion from the bare handed condition, but no significant difference between the gloved-hand conditions.

The Ranger Telerobotic Shuttle Experiment (RTSX) is a Space Shuttle-based flight experiment to demonstrate key telerobotic technologies for servicing assets in Earth orbit. The flight system will be teleoperated from onboard the Space Shuttle and from a ground control station at the NASA Johnson Space Center. The robot, along with supporting equipment and task elements, will be located in the Shuttle payload bay. A number of relevant servicing operations will be performed-including extravehicular activity (EVA) worksite setup, orbital replaceable unit (ORU) exchange, and other dexterous tasks. The program is underway toward an anticipated launch date in CY2002. This paper gives an overview of the RTSX mission, and describes several follow-on mission scenarios involving cooperative Ranger and EVA activities.