Search Results

Road tests on a pickup truck have been conducted to determine the acoustic loads on the back panel surfaces of the vehicle. Surface mounted pressure transducers arrays are used to measure both the turbulent flow pressures and the acoustic pressures. These measurements are used to determine the spatial excitation parameters used in an SEA model of the transmission loss through the back panel surfaces. Comparisons are made between tests on different road surfaces and at different speeds to identify the relative contributions of acoustic and wind noise.

A four element wind noise transducer has been designed with surface mounted electret microphones in an array pattern which allows for the separate determination of the acoustic and turbulent pressures in wind noise. Three closely spaced transducers, defining an x-y coordinate system, are positioned to determine the velocity and direction of the turbulent flow. A fourth transducer is positioned at a greater distance such that the correlation of the turbulent flow will be diminished while the correlation of the acoustic pressure remains due to its longer wavelength. By averaging the cross-spectral densities of the pressure signals over time, the two contributors to wind noise can be differentiated. In addition, a wireless interface has been designed to minimize the flow disturbance of the transducer array.

The magnitude of the turbulent pressure spectrum in fluid flow over an obstruction is usually much larger than in attached flow over a smooth surface. External features on a vehicle, such as windshield wipers, side mirrors and pillars which cause flow separation, are a major source of wind noise. The modeling of the pressure spectrum in separated flow is important for designing quiet vehicles. In this study wind tunnel tests have been performed with different shaped obstructions to measure and correlate the surface pressure spectra with flow parameters such as the pressure coefficient and separation size. The model by Chase for attached turbulent boundary layer pressures is generalized to apply to separated flow conditions.

A wind noise model of a vehicle has been developed using Statistical Energy Analysis (SEA) with measured turbulent pressure data as the source input. Empirical formulas are used to scale the input data for changes in flow and design parameters. Wind tunnel tests have been conducted on a standard and modified vehicle to validate the SEA model and the input scaling. The results show good correlation with both the exterior turbulent pressure levels and the interior sound pressure levels across the audio frequency range.

A series of tests have been performed on a production vehicle to determine the characteristics of the external turbulent flow field in wind tunnel and road conditions. Empirical formulas are developed to use the measured data as source levels for a Statistical Energy Analysis (SEA) model of the vehicle structural and acoustical responses. Exterior turbulent flow and acoustical subsystems are used to receive power from the source excitations. This allows for both the magnitudes and wavelengths of the exterior excitations to be taken into account - a necessary condition for consistently accurate results. Comparisons of measured and calculated interior sound levels show good correlation.