Search Results

The present paper concentrates on the option of catalytic autothermal reforming of gasoline for fuel cell applications. Major parameters of this process are the “Steam to Carbon Ratio” S/C and the air to fuel ratio λ. Computations assuming thermodynamic equilibrium in the autothermal reactor outlet (ATR) were carried out to attain information about their proper choice, as failure in adjusting the parameters within narrow limits has severe consequences on the reforming process. In order to quantify velocity distribution just ahead the catalyst and to evaluate mixing uniformity we designed an ATR featuring an optical access: Thus flow visualization using PIV (Particle Image Velocimetry) and LIF (Laser Induced Fluorescence) technique is possible. Preliminary PIV-results are presented and compared with CFD computations (Computational Fluid D ynamics).

A detailed understanding of the complex chemistry-turbulence interaction is gaining an increasing importance for further improvement of IC engine performance. Multidimensional optical diagnostic techniques have become a versatile tool for engine development. Sophisticated automatic data post-processing will achieve an increasing significance for efficient data reduction in such optical experiments. The focus of this paper is the detection of flame fronts using different image processing algorithms. In a further step of the data reduction, the extraction of the length of the flame front and the area of the burnt gases is presented. A strategy relying on a sensitivity analysis is discussed which allows an objective choice of parameters necessary for the application of the mathematical algorithms.

This paper reports on the development of novel time resolved spectroscopic imaging techniques for the study of spark ignition phenomena in combustion cells and an SI-engine. The techniques are based on planar laser induced fluorescence imaging (PLIF) of OH radicals, on fuel tracer PLIF, and on chemiluminescence. The techniques could be achieved at repetition rates reaching several hundreds of kilo-Hz and were cycle resolved. These techniques offer a new path along which engine related diagnostics can be undertaken, providing a wealth of information on turbulent spark ignition.

Basic optical properties have been investigated in order to characterize the HCCI-combustion process. Basic optical properties of a Homogeneous Charge Compression Ignition (HCCI) engine have been investigated in order to characterize the combustion process. The absorption of light propagating through the combustion chamber has been spectrally resolved for four different fuels. Significant differences between the fuels could be detected. Complementary information could be obtained by recording spontaneous emission of radiation during combustion. Raman point measurements were used to quantify cycle-to-cycle variations of the equivalence ratio. The homogeneity of the charge was monitored by the use of two-dimensional tracer LIF. That method was also utilized to investigate the flame development. The experiments were performed in a six-cylinder, truck-sized engine with one cylinder modified to allow for optical access.

In this work, constant volume combustion is studied using a zero-dimensional FORTRAN code, which is a wide-ranging chemical kinetic simulation that allows a closed system of gases to be described on the basis of a set of initial conditions. The model provides an engine- or reactor-like environment in which the engine simulations allow for a variable system volume and heat transfer both to and from the system. The combustion chamber is divided into two zones as burned and unburned ones, which are separated by an assumed thin flame front in the combustion model used for this work. Equilibrium assumptions have been adopted for the modeling of the thermal ionization, where Saha's equation was derived for singly ionized molecules. The investigation is focused on the thermal ionization of NO as well as for other species. The outputs generated by the model are temperature profiles, species concentration profiles, ionization degree and an electron density for each zone.

In-cylinder crank-angle resolved imaging of fuel and OH was obtained using planar laser induced fluorescence (PLIF) in a Homogenous Charge Compression Ignition (HCCI) engine. Investigations were carried out to ascertain the extent to which the combustion process in an HCCI engine is affected by the charge homogeneity. In the experiments, the heterogeneity of the charge was varied and the effect on the combustion process was monitored. The result shows a heterogeneous combustion with large spatial and temporal variations, even with a homogeneously premixed charge. It is therefore concluded that the charge inhomogeneity has a modest effect on the combustion process.