Refine Your Search

Date

Date

Topic

Topic

Author

Author

Commercial Vehicle Cleaning Casting Data management Standard Tools and equipment

Search Results

Viewing 1 to 20 of 409
123Next >Last >>
Sort by title
Standard

AUTOMOTIVE PIPE FITTINGS
1993-06-01
HISTORICAL
J530_199306
This SAE Standard includes complete general and dimensional specifications for those types of pipe fittings commonly used in the automotive and other mass production industries where the use of lubricants or sealers is objectionable. The automotive pipe fittings shown in Figures 1 to 17 and Tables 1 to 6 are intended for general automotive and similar applications involving low or medium pressures or in conjunction with automotive tube fittings in piping systems.
Standard

AUTOMOTIVE PIPE FITTINGS
1992-06-01
HISTORICAL
J530_199206
This SAE Standard includes complete general and dimensional specifications for those types of pipe fittings commonly used in the automotive and other mass production industries where the use of lubricants or sealers is objectionable. The automotive pipe fittings shown in Figures 1 to 17 and Tables 1 to 6 are intended for general automotive and similar applications involving low or medium pressures or in conjunction with automotive tube fittings in piping systems.
Standard

AUTOMOTIVE PIPE FITTINGS
1981-01-01
HISTORICAL
J530_198101
This standard includes complete general and dimensional specifications for those types of pipe fittings commonly used in the automotive and other mass production industries where the use of lubricants or sealers is objectionable. The automotive pipe fittings shown in Figs. 1-17 and Tables 2-7 are intended for general automotive and similar applications involving low or medium pressures or in conjunction with automotive tube fittings in piping systems.
Standard

AUTOMOTIVE PIPE FITTINGS
1994-05-01
HISTORICAL
J530_199405
This SAE Standard includes complete general and dimensional specifications for those types of pipe fittings commonly used in the automotive and other mass production industries where the use of lubricants or sealers is objectionable. The automotive pipe fittings shown in Figures 1 to 17 and Tables 1 to 6 are intended for general automotive and similar applications involving low or medium pressures or in conjunction with automotive tube fittings in piping systems.
Standard

AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS
1992-02-01
HISTORICAL
J531_199202
This SAE Standard includes complete general and dimensional specifications for those types of pipe, filler, and drain plugs (shown in Figures 1 to 6 and Tables 1 to 4) commonly used in automotive and related industrial applications.
Standard

AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS
1981-01-01
HISTORICAL
J531_198101
This standard includes complete general and dimensional specifications for those types of pipe, filler, and drain plugs (shown in Figs. 1-6 and Tables 2-4) commonly used in automotive and related industrial applications.
Standard

AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS
1994-06-01
HISTORICAL
J531_199406
This SAE Standard includes complete general and dimensional specifications for those types of pipe, filler, and drain plugs (shown in Figures 1 to 6 and Tables 1 to 4) commonly used in automotive and related industrial applications.
Standard

Air Brake Valve - Performance Requirements
2020-12-18
CURRENT
J1410_202012
This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity
Standard

Air Brake Valve - Performance Requirements
2016-07-20
HISTORICAL
J1410_201607
This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity
Standard

Air Brake Valve Input-Output Characteristic Requirements
2016-06-17
CURRENT
J1861_201606
This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)
Standard

Air Brake Valve Input-Output Characteristic Requirements
2011-09-12
HISTORICAL
J1861_201109
This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)
Standard

Air Reservoir Capacity Performance Guide—Trucks and Buses
2014-10-09
HISTORICAL
J1609_201410
This SAE Recommended Practice establishes performance guidelines of the air reservoir systems used on trucks, towing trucks, truck-tractors, trailers, and converter dollies with GVWRs over 10 000 lb designed to be used on the highway. NOTE: Compliance with this document does not guarantee compliance with the air reservoir requirements of FMVSS 121.
Standard

BRAKE BLOCK CHAMFER
1990-11-01
HISTORICAL
J662_199011
The scope of this SAE Standard is to provide a uniform chamfer on brake blocks.
Standard

BRAKE SYSTEM TEST PROCEDURE—SNOWMOBILES
1973-10-01
HISTORICAL
J45_197310
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles.
Standard

Brake Block Chamfer
2011-05-17
CURRENT
J662_201105
The scope of this SAE Standard is to provide a uniform chamfer on brake blocks.
Standard

Brake Effectiveness Marking for Brake Blocks - Truck and Bus
2019-06-06
CURRENT
J1801_201906
This SAE Recommended Practice provides the method to assign numerical values of brake effectiveness, using data from single station inertia dynamometer effectiveness tests, and to identify a uniform procedure to mark these values on the edge of brake blocks in excess of 12.7 mm (0.51 in) in thickness.
Standard

Brake Effectiveness Marking for Brake Blocks—Truck and Bus
2014-10-27
HISTORICAL
J1801_201410
This SAE Recommended Practice provides the method to assign numerical values of brake effectiveness, using data from single station inertia dynamometer effectiveness tests, and to identify a uniform procedure to mark these values on the edge of brake blocks in excess of 12.7 mm (0.51 in) in thickness.
123Next >Last >>
X