Refine Your Search

Date

Date

Topic

Topic

Test equipment and instrumentation Tests and Testing Test procedures Commercial Vehicle OPTC3, Lighting and Sound Committee

Search Results

Viewing 1 to 20 of 22
12Next >Last >>
Sort by title
Standard

Alarm - Backup - Electric Laboratory Performance Testing
2023-06-27
CURRENT
J994_202306
The scope of this SAE Standard is the definition of the functional, environmental, and life cycle test requirements for electrically operated backup alarm devices primarily intended for use on off-road, self-propelled work machines as defined by SAE J1116 (limited to categories of (1) construction, and (2) general purpose industrial).
Standard

CRITERIA FOR BACKUP ALARM DEVICES
1971-10-01
HISTORICAL
J994A_197110
The job requirements, along with local, state, or national codes, should dictate whether a backup alarm device shall be used on construction and mobile outdoor industrial machinery. In the cases of those machines which do not distinguish in direction of working travel and where the machine is equipped so the operator can face the direction of travel each time (for example, certain compactors, loaders, and dozers), the use of a backup alarm device may not be applicable.
Standard

Discriminating Back-Up Alarm System Standard
1999-06-01
CURRENT
J1741_199906
This SAE Standard describes methods for evaluating the performance of the systems detection device, the minimum detection areas behind the machine, the visual and audible information presented to the operator and ground personnel, and the systems fault detection requirements. Also included are operator system function tests and maintenance procedures.
Standard

Headlamps for Industrial Equipment
2017-10-10
CURRENT
J95_201710
This SAE Standard provides performance and general design requirements and related test procedures for headlamps for use on industrial wheeled equipment that may be operated on public roads.
Standard

Headlamps for Industrial Equipment
2007-01-30
HISTORICAL
J95_200701
This SAE Standard provides performance and general design requirements and related test procedures for headlamps for use on industrial wheeled equipment that may be operated on public roads.
Standard

Horn - Forward Warning - Electric - Performance, Test, and Application
2022-08-05
CURRENT
J1105_202208
The scope of this SAE Standard is the definition of the functional, environmental, and life cycle test requirements for electrically operated, operator controlled forward warning horn devices, primarily intended for use on self-propelled, work machines as defined by SAE J1116 (limited to categories of (1) construction and (2) general purpose industrial).
Standard

LED Work Lighting Devices
2022-06-13
CURRENT
J2895_202206
This SAE Recommended Practice provides general design performance requirements and related test procedures for LED “white” lighting unit assemblies, other than signal and marking devices, used on Earthmoving, Road Building, and Maintenance off-road work machines as defined in SAE J1116. This report is intended to serve as a guide to standard practice and is subject to change to reflect additional experience and technical advances.
Standard

MEASUREMENT PROCEDURE FOR DETERMINING A REPRESENTATIVE SOUND LEVEL AT A CONSTRUCTION SITE BOUNDARY LOCATION
1978-04-01
HISTORICAL
J1075_197804
This SAE Recommended Practice sets forth procedures and instrumentation to be used for determining a representative sound level during a representative time period at selected measurement locations on a construction site boundary. It concerns the community adjacent to the construction site, and it is not intended for use in determining occupational hearing damage risk.
Standard

SEALED LIGHTING UNITS FOR CONSTRUCTION, INDUSTRIAL, AND FOREST MACHINERY
1994-06-01
HISTORICAL
J598_199406
This SAE Recommended Practice applies to floodlamp, headlamp, and general service lamp units intended for use on off-road self-propelled work machines classified as construction (1.1 and 1.2), general purpose industrial (2), and forestry machines (4), as noted in SAE J1116. Construction and Industrial Machinery is normally operated off highways; therefore, this document is not intended to be used as a basis for regulations by those having authority over motor vehicles used on public highways. Other performance and dimensional information is contained in SAE J572 and J760.
Standard

SOUND MEASUREMENT - CONSTRUCTION SITE
1987-03-01
HISTORICAL
J1075_198703
This SAE Standard sets forth measurement procedures and instrumentation to be used for determining a "representative" sound level during a representative time period at selected measurement locations on a construction site boundary. The standard is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgment of the user.
Standard

SOUND MEASUREMENT - EARTHMOVING MACHINERY - EXTERIOR
1986-06-01
HISTORICAL
J88_198606
This SAE Standard is applicable to machinery that is primarily used in construction and mining applications. It is not intended to cover operation of safety devices (such as backup alarms). The sound levels obtained by using the test procedures set forth in this SAE Standard are repeatable and are representative of the higher range of sound levels generated by the machinery under actual field operating conditions, but do not necessarily represent the average sound level over a field use cycle.
Standard

SOUND POWER LEVEL MEASUREMENTS - EARTHMOVING MACHINERY (DOZER, LOADER, EXCAVATOR, AND BACKHOE) - IN PLACE DYNAMIC - SOUND PRESSURE LEVEL OR SOUND INTENSITY METHOD
1987-04-01
HISTORICAL
J1805_198704
The requirements for setting up and operating the machinery, the microphone array and hemispherical measurement surface are given in this document. This document shall be used in conjunction with manufacturer's recommendations pending finalization of ANSI documents on the subject of sound intensity procedures. The accompanying sound intensity procedure clarification is provided pending more widespread understanding of sound intensity.
Standard

Sound Measurement - Construction Site
2021-07-15
CURRENT
J1075_202107
This SAE Standard sets forth measurement procedures and instrumentation to be used for determining a “representative” sound level during a representative time period at selected measurement locations on a construction site boundary. The document is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgment of the user.
Standard

Sound Measurement - Construction Site
2013-03-19
HISTORICAL
J1075_201303
This SAE Standard sets forth measurement procedures and instrumentation to be used for determining a “representative” sound level during a representative time period at selected measurement locations on a construction site boundary. The document is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgment of the user.
Standard

Sound Measurement - Off-Road Work Machines - Exterior
2013-06-20
CURRENT
J88_201306
This SAE Standard sets forth the instrumentation and procedure to be used in measuring the exterior sound pressure levels for self-propelled off-road work machines as defined in sections 1, 3, 5 and 6 of SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. The sound levels obtained by using the test procedures set forth in this document are repeatable and are representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to the variability of field operating conditions, this data is not intended to be used for construction site boundary noise evaluations.
12Next >Last >>
X