Search Results

The potential contributions of acoustical technology to manufacturing companies pervade nearly all of its functions from marketing and product planning to design engineering and quality control. Despite this, however, companies generally feel uneasy when they embark on programs to use acoustics in their operations because the technology seems complicated and somehow harder to “get a handle on” than it is in other cases. But the issues of product sound, and the benefits of acoustics on a diagnostic tool are too important to ignore, so in this paper we discuss these issues in a “20 questions” format to help planners, engineers and managers as they proceed to implement acoustical technology in their organizations.

Fixed displacement pumps will continue to be a popular choice for hydraulic system designers for decades to come. These pumps are used in almost every industrial and mobile market segment and are generally less expensive than comparable variable displacement type pumps. Fixed displacement “Vane Type” pumps are especially popular because of their low noise characteristics as well as their inherent repair features. The demand for “Vane Type” fixed displacement pumps continues to grow in all market segments. Because of this continued demand, a new design of “fixed displacement vane pumps” is being developed. These pumps, designated the VPF Series, are targeted to offer continuous operating pressures up to 280 BAR with displacements from 40 to 215 cc/rev.

J I Case Company has produced four-wheel-drive agricultural tractors since 1964. In 1984 however, the flagship of the Case fleet changed hands. Rising labor costs and larger farming operations spearheaded the need for a more efficient larger tractor. January 1984 marked the introduction of the largest four-wheel-drive tractor in the history of Case, the 4994, a 400-gross engine horsepower tractor, Figure 1. Sheer horsepower alone however, would not meet the requirements of today's farming operations. Case Engineering realized that tomorrows tractors must have sufficient power to handle the wide variety of attachments available. They also realized that along with the unmatched power must come precise control of the attachment. These advancements in farming have required improvements to the tractor hydraulic system. This paper describes the hydraulic system of the 4994, Case's new flagship.

Current trends in application technology indicate an increasing realization on the part of manufacturers and users of agricultural chemicals of the important role that application techniques and/or equipment play in the overall success of pesticide application. The trends that are most significantly influencing the way chemicals are currently applied include: increased emphasis on improving the accuracy of application increased use of low volume application (3-8 GPA) renewed interest in use of granular application increased use of conservation tillage increased emphasis on reduction in environmental contamination, both within and outside the target area increased use of highly active cam-pounds

Close-range photogrammetry (CRP) is traditionally based on a network captured with the camera lens at a fixed focal length. A zoom lens is not desirable without solving the intrinsic camera parameters for varying focal length and lens distortion. When using a zoom lens camera, multiple focal lengths can be used if the camera is calibrated for each varying focal length, but most consumer grade lenses are not designed to accurately return to (or stay at) mid-range focal lengths. Similarly, using close-range photogrammetric software systems to accurately recover three-dimensional (XYZ) data from Point and Shoot (PAS) digital cameras has been problematic when the images were not intended for CRP. PAS cameras are automatically refocused and easily zoomed so the focal length and lens distortion are typically unknown for CRP mensuration purposes. In such circumstances, traditional CRP analysis can be both laborious and difficult without the correct camera parameters.

In order to reduce fuel consumption, companies have been looking at hybridizing vehicles. So far, two main hybridization options have been considered: electric and hydraulic hybrids. Because of light duty vehicle operating conditions and the high energy density of batteries, electric hybrids are being widely used for cars. However, companies are still evaluating both hybridization options for medium and heavy duty vehicles. Trucks generally demand very large regenerative power and frequent stop-and-go. In that situation, hydraulic systems could offer an advantage over electric drive systems because the hydraulic motor and accumulator can handle high power with small volume capacity. This study compares the fuel displacement of class 6 trucks using a hydraulic system compared to conventional and hybrid electric vehicles. The paper will describe the component technology and sizes of each powertrain as well as their overall vehicle level control strategies.

Frequency domain testing has had limited use in the past for durability evaluations of automotive components. Recent advances and new perspectives now make it a viable option. Using frequency domain testing for components, test times can be greatly reduced, resulting in considerable savings of time, money, and resources. Quality can be built into the component, thus making real-time subsystem and full vehicle testing and development more meaningful. Time domain testing historically started with block cycle histogram tests. Improved capabilities of computers, controllers, math procedures, and algorithms have led to real time simulation in the laboratory. Real time simulation is a time domain technique for duplicating real world environments using computer controlled multi-axial load inputs. It contains all phase information as in the recorded proving ground data. However, normal equipment limitations prevent the operation at higher frequencies.

Regulatory requirements in the European Union (EU) for off-road machines and road vehicles are different. Vehicles which transport passengers and goods, along with attached trailers, as well as road motorcycles must meet EEC type-approval requirements. All other types of self-propelled machines must meet the requirements of the Machinery Directive (Council Directive 98/37/EC), and the Electromagnetic Compatibility (EMC) Directive (Council Directive 89/336/EEC) and possibly other directives. This includes such categories as agriculture and forestry machines, construction machines, industrial trucks and similar products. The various directives outline the different processes for demonstrating compliance with the EU requirements. The intent of this paper is to summarize a few of the requirements that are of interest to off-highway equipment manufacturers and to identify some sources of information about the regulatory requirements.

“Today, wearing parts are regularly subjected to abnormal loading conditions. They must be able to accept these conditions without failure. In continuous operations, unscheduled downtime greatly increases maintenance costs, not to mention the cost of lost production. White iron castings offer premium abrasion resistance for many of these applications, but are often not used due to the possibility of brittle failure and the difficulty of mechanical attachment. This paper discusses the properties and applications of a composite of martensitic white iron and mild steel. This laminate will accept medium to high impact without loss of service failure, and can be installed by mechanical means or with welded attachment.”

A software tool has been developed to aid designers and process engineers in the development and improvement of heat treat processes. This tool, DANTE™, combines metallurgical phase transformation models with mass diffusion, thermal and mechanical models to simulate the heating, carburization, quenching and tempering of steel parts. The technology behind the DANTE software and some applications are presented in this paper.

On January 10th, 1972, an S. A. E. Paper “Lighting System Performance and the Computer as a Maintenance Tool” (720087) was presented by Charles J. Owen. This was a paper presented on the causes, effects, corrections and a study in good and bad electrical wiring, presented pictorially as well as editorially. We recommend that paper to you for reading. On November 4th, 1974, S. A. E. Paper “A Case for Standardization” (741143) was presented by Charles J. Owen. The purpose of this paper was intent on “improving the breed”. The recommendations and specifications were very specific. In view of the two previous papers, this paper is presented specifically for the designer with back-up data involving recommendations that the industry have generally accepted as applied to the electrical wiring systems The practical data included, is a first in relating indexes of performance and indexes to cost comparisons. The usefulness of this paper in aiding a Designer is the target of the authors.

Diesel powered vehicles are characterized by two distinctives, of particulate, sensed by sight, and odor, sensed by smell. Dramatically reducing these distinctives would result in a “clean diesel”. A joint program of Yellow Freight System, Inc. (YFS) and the author's employer (DCI) has addressed one distinctive (particulate) and has resulted in an exhaust filtering system for the diesel forklift trucks YFS use to move freight at their terminals. This paper covers design, installation, and testing of the system to filter the particulate emissions emanating from these forklifts. The filters, designed to operate for one programmed maintenance (PM) cycle, are then cleaned in off-board equipment and returned to service for another cycle. All filter materials utilized are compatible with the 200°C normal maximum operating temperature, although short excursions to 260°C have not been detrimental.

A distributed sensor is created to sense the rate of change in deflection of beam-like structures such as crane booms. This sensor will be useful in electrohydraulic compensation of boom deflections. The sensor is made of an array of strain-sensitive segments such as strain gages or piezoelectric film. In this example, segments of piezoelectric film convert strains on the surface of a vibrating beam into electrical outputs. These outputs are connected to low impedance signal conditioners. The output of the signal conditioners are then interpolated with a weighting vector that incorporates Lagrange polynomials, specified boundary conditions, and the desired location(s) of measurement. A simple linear combiner circuit combines the electrical outputs into the deflection velocity at the desired points.

Valve blocks are the key parts in hydraulic systems. A feature-based product model is the foundation of the CAD/CAM system for valve blocks--VBCADAM. This paper mainly analyses the design procedure of valve blocks, the application of feature-based design and modeling, object-oriented approach in the development of VBCADAM, such as feature definition and classification, the frame description of features, structure of product model and also the application of the product model in VBCADAM.

A new hydraulic system was developed using off-the-shelf components to gain lower effort steering, push-button machine function controls, and improved reliability. The ability to alter or add to the system (flexibility) is a requirement. The hydraulic control requirements for this vehicle are similar to other self-propelled machines. The inherent flexibility of this system may make it adaptable, at least in part, to other vehicles.

When two pieces of heavy equipment interact, jolting and jarring can occur. During haulage truck loading for example, there is a chance that the operator of one or both pieces of the equipment will experience jolting and jarring. Additionally, a jolt can occur when an off highway equipment operator drives over a road defect or inadvertently strikes a berm. Aside from the operators, there is seldom anyone else that witnesses the interaction and can accurately describe the extent of the jolting. This makes it difficult for health and safety managers to address jolting and jarring. The devices and software described in this paper constitute a method for installing “black boxes” called Shox Boxes onboard equipment that already have a GPS system onboard. The resulting configuration provides an objective assessment of jolting and a chance to determine the root causes of it.

Production cost analyses show a potential economic advantage for thegiant loaders on large jobs. This paper presents a cost comparison between the Model 475 tractor shovel, a smaller tractor shovel, and a swing shovel. Evolutionary events and designs leading to the creation of the 475 are presented and discussed. Design considerations and specific features of this unit are pointed out. Some of these are: loader linkage design, hollow boom construction, split hydraulic system, and a hydraulic power assist for operator controls. Prototype testing and changes are discussed and explained.

Recently, significant focus and development effort has been dedicated toward in-vehicle networking. This effort includes work on behalf of the American Trucking Association (ATA), the Society of Automotive Engineers (SAE), the International Standards Organization (ISO), and independent developments by automotive and semiconductor manufacturers. In-vehicle networking extends, as a result, beyond passenger cars into heavy truck, military, and construction vehicles. In the course of these developments, the benefits of networking have been examined and networking is perceived as having significant benefits, resulting in production and custom development [1, 2, 3]. The Controller Area Network (CAN) is a high-performance serial communication solution which has been designed to meet the requirements for the broad range of applications and has now progressed from a specification to a product.

The use of instrumentation on agricultural equipment slowly evolved from human observation of the operation of the equipment to a level of instrumentation which parallels that found on automobiles, and shared that automotive plateau for approximately 40 years. It has now embarked on a path which differs from that of the automobile. These differences are now openly competitive within the agricultural industry in both the choice of display technology and in function selection. This paper reviews both the early and modern agricultural instrumentation along with some of the unique functions now being monitored.

A knowledge-based system for agricultural tillage equipment selection and management is presented. There are ten tillage systems suitable for corn and soybean production in Ontario. These systems manipulate the soil by different amounts resulting in varying levels of soil degradation, crop yields, and weed problems. Many factors, such as soil characteristics, climate, farm economics, and environmental impact make the selection of the most appropriate tillage practice a difficult task. Except for mouldboard plough, few farmers have experience operating and managing these tillage systems. Knowledge and information obtained from three experts is incorporated into the knowledge-based computer program to aid farmers in the selection and management of tillage systems. Selection criteria included in the program are environmental impact, management difficulty, economic return, and energy output/input ratio.