Refine Your Search

Date

Date

Topic

Topic

Vehicles, Equipment, and Performance Powertrains MTC1, Earthmoving Machinery Emissions

Search Results

Viewing 1 to 20 of 86
123Next >Last >>
Sort by title
Standard

CAPACITY RATING—ELEVATING SCRAPERS
1985-01-01
HISTORICAL
J957_198501
This standard applies to elevating scrapers as defined in SAE J728 and J1057. It is similar to ISO/DIS 6484.
Standard

CENTER OF GRAVITY TEST CODE
1977-06-01
J874A_197706
This code applies to all types of self-propelled machinery. It covers five methods of determination as follows: Suspension Method Null Point Method Platform Support Reaction Method Reaction Method Balance Method
Standard

CENTER OF GRAVITY TEST CODE
1985-10-01
J874_198510
This SAE Standard applies to off-road self-propelled construction, forestry, and industrial machines as listed in categories 1, 2, and 4 of SAE J1116.
Standard

CENTER OF GRAVITY TEST CODE
1986-03-01
J874_198603
This SAE Standard applies to off-road self-propelled construction, forestry, and industrial machines as listed in categories 1, 2, and 4 of SAE J1116.
Standard

COMPONENT NOMENCLATURE - DUMPER TRAILER
1990-07-01
HISTORICAL
J734_199007
See the following sections of SAE J1057 for machine identification: See SAE J1016 for additional component nomenclature.
Standard

COMPONENT NOMENCLATURE - DUMPERS
1990-07-30
HISTORICAL
J1016_199007
This SAE Standard provides names of major components peculiar to dumpers as defined in SAE J1057 (see Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine. For component nomenclature for dumper trailers, refer to SAE J734.
Standard

COUNTERSUNK SQUARE HOLES FOR CUTTING EDGES AND END BITS
1986-07-01
HISTORICAL
J740_198607
To be used on cutting edges and end bits in conjunction with No. 3 head plow bolts (Ref. ANSI B18.9) typically used on off-road self-propelled work machines as described in SAE J1116. Cutting edges are further defined in SAE J737, J739 and J1304. End bits are further defined in SAE J63. 1 When section thickness exceeds A in drawing 1 (Figure 2) (countersunk one side) or B in drawing 4 (countersunk both sides), use counterbore with diameter D, as shown in cross section drawings 2, 5 and 6, or extended countersink C, as shown in cross section drawings 3 and 7. 2 The inscribed circle of the square holes shall be concentric with countersink or counterbore within 0.03 in (0.8 mm).
Standard

CUTTING EDGE—DOUBLE BEVEL CROSS SECTIONS
1986-06-01
HISTORICAL
J738_198606
This standard is for cutting edge sections typically used in earthmoving machinery defined in SAE J1507: a Tractor - Scrapers as defined in SAE J728. b Dozers as described in SAE J729 and J173. c Loaders as described in SAE J731. d Graders as described in SAE J870. Hole spacing is defined for dozers and scrapers in J737 and graders in J739. Hole conformation is defined in J740.
Standard

Capacity Rating--Dumper Body and Trailer Body
2003-05-08
CURRENT
J1363_200305
This SAE Standard applies to dumper bodies as defined in SAE J1016 and dumper trailers as defined in SAE J734. It is similar to ISO 6483. Purpose The purpose of this document is to provide a uniform method for calculating the SAE rated volumetric capacity.
Standard

Capacity Rating--Elevating Scrapers
2003-05-12
CURRENT
J957_200305
This SAE Standard specifies a procedure for approximating the volume of a typical material carried in the bowl of an elevating scraper as defined in SAE J728 and SAE J1057. The volumes are based on the inside dimensions of the bowl and a representative volume on top of the bowl. This rating method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific application.
Standard

Capacity Rating--Loader Bucket
2000-02-07
CURRENT
J742_200002
This standard applies to buckets of loaders (as defined by SAE J1057a, Identification Terminology of Earthmoving Machines). This method applies primarily to buckets having parallel sides and a cutting edge parallel to the top edge of the top edge of the back sheet. Moderately clipped back sheet corners will introduce no appreciable errors. Bucket teeth, tooth adapters, as well as other similar local discontinuities are ignored. a. Interpretation of irregular shaped cutting edges is identified in 4.4. b. Interpretation of irregular shaped side sheets is identified in 4.5.
Standard

Component Nomenclature--Construction Two- and Four-Wheel Tractors
2000-06-28
CURRENT
J869_200006
This SAE Standard provides names of major components peculiar to tractors used with scrapers and dumpers. (See Figures 1 to 3.) Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
123Next >Last >>
X