Standard
DIESEL FUEL INJECTION NOZZLE AND HOLDER ASSEMBLY (17 MM NOMINAL DIAMETER) TYPES 8, 10, 9 AND 11
1983-08-01
HISTORICAL
J265_198308
Search Results
Standard
DIESEL FUEL INJECTION NOZZLE AND HOLDER ASSEMBLY (21 mm NOMINAL DIAMETER - SIZE "S"), FLANGE MOUNTED TYPES 5 AND 6
1983-08-01
HISTORICAL
J629_198308
Standard
DIESEL FUEL INJECTION NOZZLE HOLDER ASSEMBLY (9.5 mm)
1977-10-01
HISTORICAL
J347A_197710
This SAE Recommended Practice has been developed for the use of diesel engine manufacturers requiring a nozzle holder assembly of small shank diameter for their engines.
Standard
DIESEL FUEL INJECTION PUMP—VALIDATION OF CALIBRATING NOZZLE HOLDER ASSEMBLIES
1988-04-01
HISTORICAL
J1549_198804
The fuel injection pump is intended to validate the accuracy of calibrating nozzle and holder assemblies for applications using 0.4 - 0.8 mm diameter orifice plates and to assist in identifying problems in fuel injection pump test stands. This SAE Recommended Practice is divided into two parts: Part I—Design, Description and Specifications of the Fuel Injection Pump; and Part II—Test Procedures for Using the Fuel Injection Pump.
Standard
DIESEL FUEL INJECTOR ASSEMBLY - FLANGE MOUNTED TYPES 5 AND 6
1991-04-01
HISTORICAL
J629_199104
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of two types of fuel injectors in diesel engines. The location and dimensions of the fuel inlet, leak-off connections, and flange design are not defined since they may vary according to the particular application.
Standard
DIESEL FUEL INJECTOR ASSEMBLY TYPE (9.5 MM)
1995-07-10
HISTORICAL
J347_199507
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.
Standard
DIESEL FUEL INJECTOR ASSEMBLY TYPE 27 (9.5 mm)
1989-11-01
HISTORICAL
J1984_198911
This document specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.
Standard
DIESEL FUEL INJECTOR ASSEMBLY TYPE 28 (9.5 MM)
1995-11-01
HISTORICAL
J1984_199511
This document specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.
Standard
DIESEL FUEL INJECTOR ASSEMBLY TYPE 7 (9.5 mm)
1988-07-01
HISTORICAL
J347_198807
This standard specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.
Standard
DIESEL FUEL INJECTOR ASSEMBLY—TYPES 8, 9, 10, AND 11
1991-04-01
HISTORICAL
J265_199104
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of four types of fuel injectors in diesel engines. Two of the types specified are flats-located injectors. The location and dimensions of the fuel inlet, leak-off connections, and type of attachment are not defined since they may vary according to the particular application.
Standard
DIESEL INJECTION PUMP TESTING—PART 1: CALIBRATING NOZZLE AND HOLDER ASSEMBLIES
1991-05-01
HISTORICAL
J968/1_199105
This part of SAE J968 specifies two types of calibrating nozzle and holder assemblies intended for the testing and setting of diesel injection pumps on test benches. It applies to: a A calibrating nozzle and holder assembly with a single hole orifice plate; b A calibrating nozzle and holder assembly with a delay pintle type nozzle. The approximate range of the calibrating nozzle and holder assembly is up to: a 300 mm3/stroke with the single hole orifice plate; b 150 mm3/stroke with the delay pintle type nozzle. Setting and maintenance requirements are specified in ISO 4008/3.
Standard
DIESEL INJECTION PUMP TESTING—PART 1: CALIBRATING NOZZLE AND HOLDER ASSEMBLIES
1995-06-27
HISTORICAL
J968/1_199506
This part of SAE J968 specifies two types of calibrating nozzle and holder assemblies intended for the testing and setting of diesel injection pumps on test benches. It applies to: a A calibrating nozzle and holder assembly with a single hole orifice plate; b A calibrating nozzle and holder assembly with a delay pintle type nozzle. The approximate range of the calibrating nozzle and holder assembly is up to: a 300 mm3/stroke with the single hole orifice plate; b 150 mm3/stroke with the delay pintle type nozzle. Setting and maintenance requirements are specified in ISO 4008/3.
Standard
DIESEL INJECTION PUMP TESTING—PART 2: ORIFICE PLATE FLOW MEASUREMENT
1995-06-27
HISTORICAL
J968/2_199506
This part of SAE J968 specifies the flow measuring system, including the fixture, to be used for flow testing the single hole orifice plates used in an orifice plate type nozzle and holder assembly (described in SAE J968/1) which is intended for testing and setting diesel fuel injection pumps on test benches. The flow measuring system and fixture ensure accurate flow testing of the entire range of orifices from 0.4 to 0.8 mm diameter as specified in SAE J968/1. It is intended primarily for use by the manufacturers of single hole orifice plates.
Standard
DIESEL INJECTION PUMP TESTING—PART 2: ORIFICE PLATE FLOW MEASUREMENT
1991-05-01
HISTORICAL
J968/2_199105
This part of SAE J968 specifies the flow measuring system, including the fixture, to be used for flow testing the single hole orifice plates used in an orifice plate type nozzle and holder assembly (described in SAE J968/1) which is intended for testing and setting diesel fuel injection pumps on test benches. The flow measuring system and fixture ensure accurate flow testing of the entire range of orifices from 0.4 to 0.8 mm diameter as specified in SAE J968/1. It is intended primarily for use by the manufacturers of single hole orifice plates.
Standard
Diesel Engines - Fuel Injection Pump Testing
2016-05-10
HISTORICAL
J1668_201605
The correct setting and adjustment of fuel injection pumps requires standardized testing conditions. This SAE Standard summarizes the design and operating parameters for test benches so that, using certain information supplied by the pump manufacturer, the pump test schedule, and certain information supplied by the test bench manufacturer, it can be determined whether a particular test bench is suitable for driving a particular injection pump. This document is in most cases a summary of the ISO Standard 4008, Parts 1, 2, and 3 and is intended to provide its critical aspects. Standard ISO 4008 should be referred to for more details.
Standard
Diesel Engines - Fuel Injection Pump Testing
2021-03-17
CURRENT
J1668_202103
The correct setting and adjustment of fuel injection pumps requires standardized testing conditions. This SAE Standard summarizes the design and operating parameters for test benches so that, using certain information supplied by the pump manufacturer, the pump test schedule, and certain information supplied by the test bench manufacturer, it can be determined whether a particular test bench is suitable for driving a particular injection pump. This document is in most cases a summary of the ISO Standard 4008, Parts 1, 2, and 3 and is intended to provide its critical aspects. Standard ISO 4008 should be referred to for more details.
Standard
Diesel Engines—Fuel Injection Pump Testing
1999-04-16
HISTORICAL
J1668_199904
The correct setting and adjustment of fuel injection pumps requires standardized testing conditions. This SAE Standard summarizes the design and operating parameters for test benches so that, using certain information supplied by the pump manufacturer, the pump test schedule, and certain information supplied by the test bench manufacturer, it can be determined whether a particular test bench is suitable for driving a particular injection pump. This document is in most cases a summary of the ISO Standard 4008, Parts 1, 2, and 3 and is intended to provide its critical aspects. Standard ISO 4008 should be referred to for more details.
Standard
Diesel Fuel Injection Pump - Validation of Calibrating Nozzle Holder Assemblies
2015-09-22
HISTORICAL
J1549_201509
The fuel injection pump is intended to validate the accuracy of calibrating nozzle and holder assemblies for applications using 0.4 - 0.8 mm diameter orifice plates and to assist in identifying problems in fuel injection pump test stands. This SAE Recommended Practice is divided into two parts: Part I—Design, Description and Specifications of the Fuel Injection Pump; and Part II—Test Procedures for Using the Fuel Injection Pump.
Standard
Diesel Fuel Injection Pump - Validation of Calibrating Nozzle Holder Assemblies
2021-03-17
CURRENT
J1549_202103
The fuel injection pump is intended to validate the accuracy of calibrating nozzle and holder assemblies for applications using 0.4 - 0.8 mm diameter orifice plates and to assist in identifying problems in fuel injection pump test stands. This SAE Recommended Practice is divided into two parts: Part I—Design, Description and Specifications of the Fuel Injection Pump; and Part II—Test Procedures for Using the Fuel Injection Pump.
Standard
Diesel Fuel Injector Assembly - Flange Mounted Types 5 and 6
2002-12-13
HISTORICAL
J629_200212
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of two types of fuel injectors in diesel engines. The location and dimensions of the fuel inlet, leak-off connections, and flange design are not defined since they may vary according to the particular application.
