Search Results

Standard

Acceptance Criteria - Magnetic Particle, Fluorescent Penetrant, and Contrast Dye Penetrant Inspection

2018-10-26

CURRENT

AS3071C

To establish the acceptance criteria for discontinuities as revealed by magnetic particle or liquid penetrant examination of aircraft utility parts as in 1.2.

Standard

Acceptance Criteria - Magnetic Particle, Fluorescent Penetrant, and Contrast Dye Penetrant Inspection

2012-11-01

HISTORICAL

AS3071B

To establish the acceptance criteria for discontinuities as revealed by magnetic particle or liquid penetrant examination of aircraft utility parts as in 1.2.

Standard

Acceptance Criteria for Nuts - Magnetic Particle, Fluorescent Penetrant, and Visible Penetrant Examination

2018-08-23

HISTORICAL

AS5447

This standard establishes the acceptance criteria for surface discontinuities as revealed by magnetic particle or liquid penetrant examination of nuts.

Standard

BOLT-MACHINE, STEEL, 12 POINT HEAD, .250-28, BLACK OXIDE

2012-11-19

HISTORICAL

AS9158

Standard

Boss - Plug/Pin, Expansion Type Hole Preparation

2019-08-15

CURRENT

AIR3276

Standard

CHART—HUMIDITY INDICATOR, COLOR COMPARISON

1945-11-01

HISTORICAL

AS167

Standard

Chart – Humidity Indicator, Color Comparison

2018-04-28

CURRENT

AS167B

Standard

Chart – Humidity Indicator, Color Comparison

2012-11-01

HISTORICAL

AS167A

Standard

DEFINITIONS, AIRCRAFT ENGINE

1941-11-01

HISTORICAL

AS20

Standard

Definitions, Aircraft Reciprocating Engine Performance

2018-06-20

CURRENT

AS20D

This document lists definitions that are commonly used in describing aircraft reciprocating engine performance.

Standard

Definitions, Aircraft Reciprocating Engine Performance

2012-11-01

HISTORICAL

AS20C

This document lists definitions that are commonly used in describing aircraft reciprocating engine performance.

Standard

FINAL REPORT ON COLD STARTING OF AIRCRAFT ENGINES

1946-09-01

HISTORICAL

AIR13

Standard

GROOVE DESIGN, METAL O-RING GASKET

1998-01-01

HISTORICAL

ARP674B

Groove designs presented herein are applicable for use with the following MS metal O-ring gaskets, or to dimensionally equivalent gaskets of other materials: a AMS 5570 or AMS 5576 Plain 1 MS9141 - 0.035 tube x 0.006 wall 2 MS9142 - 0.062 tube x 0.006 wall 3 MS9202 - 0.062 tube x 0.010 wall 4 MS9203 - 0.094 tube x 0.006 wall 5 MS9204 - 0.094 tube x 0.010 wall 6 MS9205 - 0.125 tube x 0.010 wall b AMS 5570 or AMS 5576 Silver PI. 1 MS9371 - 0.035 tube x 0.006 wall 2 MS9372 - 0.062 tube x 0.006 wall 3 MS9373 - 0.062 tube x 0.010 wall 4 MS9374 - 0.094 tube x 0.006 wall 5 MS9375 - 0.094 tube x 0.010 wall 6 MS9376 - 0.125 tube x 0.010 wall

Standard

GROOVE DESIGN, METAL O-RING GASKET

1988-06-20

HISTORICAL

ARP674A

Groove designs presented herein are applicable for use with the following MS metal o-ring gaskets, or to dimensionally equivalent gaskets of other materials: AMS 5570 or AMS 5576 Plain AMS 5570 or AMS 5576 Silver P1. MS9141 - 0.035 tube x 0.006 wall MS9371 - 0.035 tube x 0.006 wall MS9142 - 0.062 tube x 0.006 wall MS9372 - 0.062 tube x 0.006 wall MS9202 - 0.062 tube x 0.010 wall MS9373 - 0.062 tube x 0.010 wall MS9203 - 0.094 tube x 0.006 wall MS9374 - 0.094 tube x 0.006 wall MS9204 - 0.094 tube x 0.010 wall MS9375 - 0.094 tube x 0.010 wall MS9205 - 0.125 tube x 0.010 wall MS9376 - 0.125 tube x 0.010 wall

Standard

Groove Design - Metal Face Seal

2013-10-28

HISTORICAL

AIR1108

Groove designs presented herein are applicable for use with machined or formed metal seals which are similar in configuration to those shown in figure 3, which operate under internal pressure or in vacuum service and which have been specifically qualified or recommended by the purchaser or the manufacturer for use with this AIR. They are also applicable for use with metal o-rings (e.g., MS9142, MS202 thru MS9205) where interchangeability with machined or formed metal seals is desired. For metal o-ring groove designs where inter-changeability is not a requirement refer to ARP 674.

Standard

Groove Design - Metal Face Seal

2019-06-06

CURRENT

AIR1108A

Groove designs presented herein are applicable for use with machined or formed metal seals which are similar in configuration to those shown in figure 3, which operate under internal pressure or in vacuum service and which have been specifically qualified or recommended by the purchaser or the manufacturer for use with this AIR. They are also applicable for use with metal o-rings (e.g., MS9142, MS202 thru MS9205) where interchangeability with machined or formed metal seals is desired. For metal o-ring groove designs where inter-changeability is not a requirement refer to ARP 674.

Standard

Groove Design, Metal C-Ring Gasket, Face Type Internal Pressure, Metric

2012-11-08

HISTORICAL

MA2537

Standard

Groove Design, Metal C-Ring Gasket, Face Type Internal Pressure, Metric

2018-08-09

CURRENT

MA2537A

Standard

Groove Design, Metal O-Ring Gasket

2018-03-30

CURRENT

ARP674D

Groove designs presented herein are applicable for use with the following "MS" metal O-ring gaskets conforming to the applicable "AS" standard drawings listed in 1(a) or 1(b), or to dimensionally equivalent gaskets of other materials: a AMS 5570 or AMS 5576 Plain 1 AS9141 - 0.035 tube × 0.006 wall 2 AS9142 - 0.062 tube × 0.006 wall 3 AS9202 - 0.062 tube × 0.010 wall 4 AS9203 - 0.094 tube × 0.006 wall 5 AS9204 - 0.094 tube × 0.010 wall 6 AS9205 - 0.125 tube × 0.010 wall b AMS 5570 or AMS 5576 Silver Plated 1 AS9371 - 0.035 tube × 0.006 wall 2 AS9372 - 0.062 tube × 0.006 wall 3 AS9373 - 0.062 tube × 0.010 wall 4 AS9374 - 0.094 tube × 0.006 wall 5 AS9375 - 0.094 tube × 0.010 wall 6 AS9376 - 0.125 tube × 0.010 wall NOTE: The term "AS gasket" as used in this document refers to the 'MS' part numbers defined on the applicable 'AS' standards listed in 1(a) or 1(b).

Standard

Groove Design, Metal O-Ring Gasket

2012-10-23

HISTORICAL

ARP674C

Groove designs presented herein are applicable for use with the following "MS" metal O-ring gaskets conforming to the applicable "AS" standard drawings listed in 1(a) or 1(b), or to dimensionally equivalent gaskets of other materials: a AMS 5570 or AMS 5576 Plain 1 AS9141 - 0.035 tube × 0.006 wall 2 AS9142 - 0.062 tube × 0.006 wall 3 AS9202 - 0.062 tube × 0.010 wall 4 AS9203 - 0.094 tube × 0.006 wall 5 AS9204 - 0.094 tube × 0.010 wall 6 AS9205 - 0.125 tube × 0.010 wall b AMS 5570 or AMS 5576 Silver Plated 1 AS9371 - 0.035 tube × 0.006 wall 2 AS9372 - 0.062 tube × 0.006 wall 3 AS9373 - 0.062 tube × 0.010 wall 4 AS9374 - 0.094 tube × 0.006 wall 5 AS9375 - 0.094 tube × 0.010 wall 6 AS9376 - 0.125 tube × 0.010 wall NOTE: The term "AS gasket" as used in this document refers to the 'MS' part numbers defined on the applicable 'AS' standards listed in 1(a) or 1(b).