Refine Your Search

Date

Date

Topic

Topic

Environment MTC1, Earthmoving Machinery Commercial vehicles

Search Results

Viewing 1 to 20 of 61
123Next >Last >>
Sort by title
Standard

CAPACITY RATING—DOZER BLADES
1988-03-01
HISTORICAL
J1265_198803
This standard applies only to straight, angling, semi-U, and U-blades for crawler and wheel tractors. It applies to angling blades only in the straight (not angled) position.
Standard

CAPACITY RATING—ELEVATING SCRAPERS
1985-01-01
HISTORICAL
J957_198501
This standard applies to elevating scrapers as defined in SAE J728 and J1057. It is similar to ISO/DIS 6484.
Standard

CENTER OF GRAVITY TEST CODE
1985-10-01
J874_198510
This SAE Standard applies to off-road self-propelled construction, forestry, and industrial machines as listed in categories 1, 2, and 4 of SAE J1116.
Standard

COMPONENT NOMENCLATURE - DUMPER TRAILER
1990-07-01
HISTORICAL
J734_199007
See the following sections of SAE J1057 for machine identification: See SAE J1016 for additional component nomenclature.
Standard

COMPONENT NOMENCLATURE - DUMPERS
1990-07-30
HISTORICAL
J1016_199007
This SAE Standard provides names of major components peculiar to dumpers as defined in SAE J1057 (see Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine. For component nomenclature for dumper trailers, refer to SAE J734.
Standard

COUNTERSUNK SQUARE HOLES FOR CUTTING EDGES AND END BITS
1986-07-01
HISTORICAL
J740_198607
To be used on cutting edges and end bits in conjunction with No. 3 head plow bolts (Ref. ANSI B18.9) typically used on off-road self-propelled work machines as described in SAE J1116. Cutting edges are further defined in SAE J737, J739 and J1304. End bits are further defined in SAE J63. 1 When section thickness exceeds A in drawing 1 (Figure 2) (countersunk one side) or B in drawing 4 (countersunk both sides), use counterbore with diameter D, as shown in cross section drawings 2, 5 and 6, or extended countersink C, as shown in cross section drawings 3 and 7. 2 The inscribed circle of the square holes shall be concentric with countersink or counterbore within 0.03 in (0.8 mm).
Standard

Capacity Rating--Dumper Body and Trailer Body
2003-05-08
CURRENT
J1363_200305
This SAE Standard applies to dumper bodies as defined in SAE J1016 and dumper trailers as defined in SAE J734. It is similar to ISO 6483. Purpose The purpose of this document is to provide a uniform method for calculating the SAE rated volumetric capacity.
Standard

Capacity Rating--Elevating Scrapers
2003-05-12
CURRENT
J957_200305
This SAE Standard specifies a procedure for approximating the volume of a typical material carried in the bowl of an elevating scraper as defined in SAE J728 and SAE J1057. The volumes are based on the inside dimensions of the bowl and a representative volume on top of the bowl. This rating method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific application.
Standard

Capacity Rating--Loader Bucket
2000-02-07
CURRENT
J742_200002
This standard applies to buckets of loaders (as defined by SAE J1057a, Identification Terminology of Earthmoving Machines). This method applies primarily to buckets having parallel sides and a cutting edge parallel to the top edge of the top edge of the back sheet. Moderately clipped back sheet corners will introduce no appreciable errors. Bucket teeth, tooth adapters, as well as other similar local discontinuities are ignored. a. Interpretation of irregular shaped cutting edges is identified in 4.4. b. Interpretation of irregular shaped side sheets is identified in 4.5.
Standard

Component Nomenclature--Construction Two- and Four-Wheel Tractors
2000-06-28
CURRENT
J869_200006
This SAE Standard provides names of major components peculiar to tractors used with scrapers and dumpers. (See Figures 1 to 3.) Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature--Dumpers
2000-06-28
CURRENT
J1016_200006
This SAE Standard provides names of major components peculiar to dumpers as defined in SAE J1057 (See Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine. For component nomenclature for dumper trailers, refere to SAE J734.
Standard

Component Nomenclature--Loader
2007-08-30
CURRENT
J731_200708
This standard includes names of major components and parts peculiar to this type machine. The illustrations are descriptive of the principles and are not intended to include all existing commercial machines. Refer to SAE J1057 (July, 1973)?Identification Terminology of Earthmoving Machines for machine type.
Standard

Component Nomenclature--Scrapers
2000-06-28
CURRENT
J728_200006
This SAE Standard provides names of major components peculiar to the scraper portion of tractor-scrapers. Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Countersunk Square Holes for Cutting Edges and End Bits
2011-10-25
CURRENT
J740_201110
To be used on cutting edges and end bits in conjunction with No. 3 head plow bolts (Ref. ANSI B18.9) typically used on off-road self-propelled work machines as described in SAE J1116. Cutting edges are further defined in SAE J737, J739 and J1304. End bits are further defined in SAE J63. 1 When section thickness exceeds A in drawing 1 (Figure 2) (countersunk one side) or B in drawing 4 (countersunk both sides), use counterbore with diameter D, as shown in cross section drawings 2, 5 and 6, or extended countersink C, as shown in cross section drawings 3 and 7. 2 The inscribed circle of the square holes shall be concentric with countersink or counterbore within 0.03 in (0.8 mm).
123Next >Last >>
X