Search Results

Standard

AIRCRAFT INSTRUMENT AND INSTRUMENT SYSTEM STANDARDS: WORDING TERMINOLOGY, PHRASEOLOGY, ENVIRONMENT AND DESIGN STANDARDS FOR

1981-01-15

HISTORICAL

AIR818C

This AS covers __________ which measure and display __________ or This AS covers __________ basic types of (no capitals) instruments as follows: Note: Each type number to be followed by a brief description as it would if the scope were covering only a single type. As many types as required may be used.

Standard

AIRCRAFT INSTRUMENT STANDARDS: WORDING, TERMINOLOGY, PHRASEOLOGY, ENVIRONMENT AND DESIGN STANDARDS FOR

1972-01-01

HISTORICAL

AIR818B

This Aerospace Standard covers ____________________ or SCOPE This Aerospace Standard covers ____________________ basic types of (no capitals) instruments as follows: NOTE: Each type number to be followed by a brief description. As many types as required may be used.

Standard

AIRSPEED INDICATOR (PITOT STATIC)

1954-12-01

HISTORICAL

AS391B

This Aeronautical Standard covers five basic types of airspeed instruments with indication range essentially as follows: TYPE I - 1 revolution TYPE II - 1 revolution (unequal scale) TYPE III - 1-1/2 to 1-3/4 revolutions TYPE IV - 7 revolutions TYPE V - 1-3/4 to 2 revolutions

Standard

AIRSPEED INDICATOR (PITOT STATIC)

1949-02-01

HISTORICAL

AS391A

This specification covers six types of instruments as follows: TYPE I - 30 - 250 miles per hour range TYPE II - 40 - 300 miles per hour range TYPE III - 50 - 400 miles per hour range TYPE IV - 50 - 450 miles per hour range TYPE V - 50 - 700 miles per hour range TYPE VI - 50 - 425 knots range

Standard

AIRSPEED INDICATOR (PITOT STATIC)

1947-07-01

HISTORICAL

AS391

This specification covers six types of instruments as follows:

Standard

AIRSPEED INDICATOR (PITOT STATIC) (RECIPROCATING ENGINE POWERED AIRCRAFT)

2008-02-16

CURRENT

AS391C

This Aeronautical Standard covers five basic types of airspeed instruments as follows:

Standard

AIRSPEED TUBES ELECTRICALLY HEATED

1960-07-15

HISTORICAL

AS393A

This aeronautical standard covers two basic types of instruments as follows: Type I - Pitot Pressure, straight and L-shaped, 12 and 14 volt nominal, 2 wire circuit. Type II - Pitot and Static Pressured, straight and L-shaped, 12 and 24 volt nominal, 2 wire circuit.

Standard

AIRSTREAM DEVIATION INSTRUMENT (ADI)

1991-05-01

HISTORICAL

ARP794

This recommended practice covers an instrument which measures and displays angle of deviation of the airstream dependent on mounting location on the aircraft.

Standard

ALTITUDE ALERTING DEVICES AND SYSTEMS

1991-05-01

HISTORICAL

ARP1061

This ARP provides performance criteria for Altitude Alerting Devices and Systems. These devices can be self-contained or receive remote altitude information and can have integral or remote barometric corrections. Only the generation of the alerting signals is covered by this recommended practice and not the details of the visual or audio alerts operated by these signals. It is recommended that the system's operational correspondence between the selected altitude settings of the Altitude Alerting Device and the Altitude Level Indication normally used to control the aircraft should not exceed ±250 ft RSS throughout the operating range of the device.

Standard

AUTOMATIC PILOTS

1991-05-01

HISTORICAL

AS402A

This Aeronautical Standard covers Automatic Pilots intended for use on aircraft to automatically operate the aerodynamic controls to maintain flight and/or to provide maneuvering about the three axes through servo control.

Standard

AUTOMATIC PILOTS

1947-08-01

HISTORICAL

AS402

This specification covers all gyroscopic and servo control types of automatic pilots intended for use on aircraft to operate automatically the control surfaces of the aircraft to maintain a stabilized flight attitude with respect to the longitudinal, lateral and vertical axes, and to provide for maneuvering the airplane through servo control.

Standard

Accelerometer Group, Counting (MS25447 and MS25448)

1999-07-01

HISTORICAL

AS22145

This specification covers the design and performance requirements for a single axis, four load-factor level counting accelerometer group referred to hereafter as “equipment.”

Standard

Accelerometer Group, Counting (MS25447 and MS25448)

2012-08-22

CURRENT

AS22145A

This specification covers the design and performance requirements for a single axis, four load-factor level counting accelerometer group referred to hereafter as “equipment.”

Standard

Air Data Computers, MPS

2008-02-16

CURRENT

AS417A

This Standard covers air data equipment (hereinafter designated the instrument) which when connected to sources of aircraft electrical power, static pressure, total pressure and outside air temperature (singly or in combination) provides some or all of the following computed air data output signals: Pressure Altitude* Total Temperature* Pressure Altitude (Reporting) Altitude Rate Baro-Corrected Pressure Altitude* Overspeed Warning Vertical Speed* Altitude Hold Computed Airspeed* Airspeed Hold Mach Number* Mach Hold Maximum Allowable Airspeed* qc (impact pressure) Static Air Temperature (*when used as an alternate for total temperature) True Airspeed Others

Standard

Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards For

2008-02-16

HISTORICAL

AIR818D

This Aerospace Standard, (AS), specifies minimum performance standards for _____________ (Instrument or instrument systems) which are primarily intended for use with (vehicles capable of flight), ((fixed wing, rotary wing) aircraft)), (other special modifiers); (and whose purpose is to display _____________ information).

Standard

Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards For

2020-02-20

CURRENT

AIR818E

This Aerospace Standard, (AS), specifies minimum performance standards for _____________ (Instrument or instrument systems) which are primarily intended for use with (vehicles capable of flight), ((fixed wing, rotary wing) aircraft)), (other special modifiers); (and whose purpose is to display _____________ information).

Standard

Airspeed Tubes Electrically Heated

2008-02-16

CURRENT

AS393B

This aeronautical standard covers two basic types of instruments as follows: Type I - Pitot Pressure, straight and L-shaped, 12 and 14 volt nominal, 2 wire circuit. Type II - Pitot and Static Pressured, straight and L-shaped, 12 and 24 volt nominal, 2 wire circuit.

Standard

Airstream Deviation Instrument (ADI)

2008-02-16

CURRENT

ARP794A

This recommended practice covers an instrument which measures and displays angle of deviation of the airstream dependent on mounting location on the aircraft.

Standard

Altimeter, Pressure, Compensated (Turbine Powered Subsonic Aircraft)

2008-02-16

CURRENT

AS415

This Aerospace Standard covers two types of compensated altimeters which indicate, by visual means, the pressure altitude compensated for the static pressure system errors of the aircraft.

Standard

Altitude Alerting Devices and Systems

2008-02-16

HISTORICAL

ARP1061A

This SAE Aerospace Recommended Practice (ARP) provides performance criteria for Altitude Alerting Devices and Systems. These devices can be self-contained or receive remote altitude information and can have integral or remote barometric corrections. Only the generation of the alerting signals is covered by this recommended practice and not the details of the visual or audio alerts operated by these signals. It is recommended that the system’s operational correspondence between the selected altitude settings of the Altitude Alerting Device and the Altitude Level Indication normally used to control the aircraft should not exceed ±250 ft RSS throughout the operating range of the device.