Search Results

This document describes requirements for standardized processes (and associated technologies) that ensure type design data are retrievable and usable for the life of a type certificate (50+ years). These processes are primarily concerned with, but not limited to, digital type design data retained in three-dimensional representations and associated data that is required for complete product definition, such as tolerances, specification call-outs, product structure and configuration control data, etc. This process standard includes process requirements for managing the evolution of technologies required to ensure the availability of the data for the life of the product. This data must be available to meet regulatory, legal, contractual and business requirements. This process standard is not intended to incorporate every company specific requirement and does not dictate specific organizational structures within a company.

This document describes requirements for standardized processes (and associated technologies) that ensure type design data are retrievable and usable for the life of a type certificate (50+ years). These processes are primarily concerned with, but not limited to, digital type design data retained in three-dimensional representations and associated data that is required for complete product definition, such as tolerances, specification call-outs, product structure and configuration control data, etc. This process standard includes process requirements for managing the evolution of technologies required to ensure the availability of the data for the life of the product. This data must be available to meet regulatory, legal, contractual and business requirements. This process standard is not intended to incorporate every company specific requirement and does not dictate specific organizational structures within a company.

To assure customer satisfaction, aerospace industry manufacturers must produce world class quality products at the lowest possible cost. AS9000 standardizes, to the greatest extent possible, the quality system requirements of the aerospace industry. Standardization of compliance requirements results in cost savings due to the elimination or reduction of unique requirements developed for each different customer. AS9000 Appendix 1, AS9000 Audit Summary and Supplier Profile Instructions, facilitates the standardization of this process.

This standard establishes the baseline requirements for performing and documenting FAI. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the applicable statutory or regulatory requirements shall take precedence.

This SAE Aerospace Standard (AS) provides a harmonized process and documentation requirements for the establishment of CoCs used to attest the conformity of aviation, space, and defense products (e.g., assemblies, sub-assemblies, equipment and systems, parts, material, software) or services. It includes a CoC template and supporting instructions on how to complete it. When quoted by the customer in a contractual requirement, application of this document is mandatory. In other cases, its use is recommended, but if there is a conflict between the requirements of this standard and customer or applicable statutory/regulatory requirements, the latter shall take precedence.

This standard defines the common nonconformity data definition and documentation that shall be exchanged between an internal/external supplier or sub-tier supplier, and the customer when informing about a nonconformity requiring formal decision. The requirements are applicable, partly or totally, when reporting a product nonconformity to the owner or operator, as user of the end item (e.g., engine, aircraft, spacecraft, helicopter), if specified by contract. Reporting of nonconformity data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.

This standard is primarily intended to apply to new parts and products intended to be produced in an on-going production phase, but can also be applied to parts currently in production (e.g., manufacturing, maintenance). The standard is applicable to all production processes that influence the variation of KCs, as well as maintenance and service processes in which KCs are identified. It applies to organizations for assemblies and all levels of parts within an assembly, down to the basic materials including castings and forgings, and to organizations that are responsible for producing the design characteristics of the product. The variation control process begins with product definition, typically stated in the design documentation (e.g., digital model, engineering drawing, specification) which identifies KCs, and leads to a variation management process for those KCs. This process may also be used for producer-identified KCs (e.g., process KCs, additional/substitute product KCs).

This standard is primarily intended to apply to new parts and products, but can also be applied to parts currently in production. The standard shall be applicable to all production processes, that influence the variation of KCs, as well as maintenance processes in which KCs are identified. It applies to assemblies and all levels of parts within an assembly, down to the basic materials including castings and forgings, and to organizations that are responsible for producing the design characteristics of the product. It does not apply to lab-scale, pilot, or pre-production processes. However, particular management of some KCs might be required using other methods than those described in the standard, during these phases of a program, when required by the customer or deemed appropriate by the organization (e.g., Engineering department requirement).

This standard is applicable to AQMS COs listed in the Online Aerospace Supplier Information System (OASIS) database. This standard is intended for the management and resolution of AQMS CO’s major QMS nonconformities. This standard is not intended to address QMS nonconformities classified as minor or nonconformities related to the products or services provided by the CO.

This Standard defines uniform Quality and Technical requirements relative to metallic parts marking performed in using "Data Matrix symbology" (2D) coding used within the aerospace industry. The ISO 16022 specifies general requirements (data characters encodation, error correction rules, decoding algorithm, etc.). In addition to this specification, part Identification with such coding is subject to the following requirements to ensure electronic reading (scanning) ability of the symbol. The marking processes covered by this standard are as follows: Dot Peening Laser Marking Electro-Chem Etching Further marking processes will be included if required. Unless specified otherwise in the contractual business relationship, the company responsible for the design of the part shall determine the location of the Data Matrix Marking. Symbol position should allow illumination from all sides for readability.

Limited to the Commercial Aerospace industry where a request is made for a Production Organization (PO) to have Direct Delivery Authorization (DDA), which includes an Appropriate Arrangement (AA) between the PO and the Design Organization (DO). In this process the DO is responsible for ensuring the continuous updating of design and airworthiness data to the PO, whilst the PO is responsible for assurance that the manufactured article conforms to Approved Design and Airworthiness Data. The PO is responsible to provide airworthiness release documentation.

Limited to the commercial aerospace industry where a request is made for a PO to have Direct Delivery Authorization (DDA), which includes an Appropriate Arrangement (AA) between the PO and the Design Organization (DO). In this process the DO is responsible for ensuring the continuous updating of design and airworthiness data to the PO, whilst the PO is responsible for assurance that the manufactured article conforms to approved design and airworthiness data. The PO is responsible to provide airworthiness release documentation.

This document contains the minimum requirements for supplier Inspection and Test Quality System. It is emphasized that the quality system requirements specified in this standard are complementary (not alternative) to the contractual and applicable law and regulatory requirements.

This document provides a basic uniform method for ensuring that aerospace standard parts (products) conform with the requirements of technical specifications referring to qualified parts and for a manufacturer of such parts to have a qualified management system at least equivalent to AS/EN/SJAC9100. These standards apply when called out in the aerospace standard part standard.

This standard defines a system for the qualification of standard products for aviation, space, and defense applications. It defines the principles that shall be adhered to when carrying out product qualification; applied in conjunction with the rules and procedures of the CA. The system enables the CA to confirm compliance is achieved and maintained, in accordance with the requirements of its product definition and associated controlling technical specifications by an Original Component Manufacturer (OCM) of standard products. This standard requires an OCM that has been granted product qualification approval to ensure applicable approvals are maintained and renewed in accordance with the CA’s quality system for that qualified product. OCMs and OCM designated Value Added Distributors (VADs) requesting product qualification to this standard, shall as a prerequisite, maintain 9100 standard quality management system certification approval.

This standard defines requirements for the preparation and execution of the audit process. In addition, it defines the content and composition for the audit reporting of conformity and process effectiveness to the 9100-series standards, the organization's QMS documentation, and customer and statutory/regulatory requirements. The requirements in this standard are additions or represent changes to the requirements and guidelines in the standards for conformity assessment, auditing, and certification as published by ISO/IEC (i.e., ISO/IEC 17000, ISO/IEC 17021-1). When there is conflict with these standards, the requirements of the 9101 standard shall take precedence.

This standard defines the common nonconformance data definition and documentation that an internal or external supplier or sub-tier supplier must submit when informing a customer of a nonconformity. The requirements shall be are applicable for reporting a nonconforming product to the owner/operator (i.e., end item user), if specified by contract. Reporting of nonconformance data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.

This standard defines the common nonconformance data definition and documentation that an internal or external supplier or sub-tier supplier must submit when informing a customer of a nonconformity. The requirements shall be are applicable for reporting a nonconforming product to the owner/operator (i.e., end item user), if specified by contract. Reporting of nonconformance data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.