Refine Your Search

Date

Date

Topic

Topic

Manufacturing processes Cutting Production MTC1, Earthmoving Machinery Education and training Vehicles, Equipment, and Performance Career and professional development

Search Results

Viewing 1 to 20 of 97
123Next >Last >>
Sort by title
Standard

CAPACITY RATING—DOZER BLADES
1988-03-01
HISTORICAL
J1265_198803
This standard applies only to straight, angling, semi-U, and U-blades for crawler and wheel tractors. It applies to angling blades only in the straight (not angled) position.
Standard

CAPACITY RATING—ELEVATING SCRAPERS
1985-01-01
HISTORICAL
J957_198501
This standard applies to elevating scrapers as defined in SAE J728 and J1057. It is similar to ISO/DIS 6484.
Standard

CAPACITY RATING—LOADER BUCKET
1985-02-01
HISTORICAL
J742_198502
This standard applies to buckets of loaders (as defined by SAE J1057a, Identification Terminology of Earthmoving machines).
Standard

CENTER OF GRAVITY TEST CODE
1977-06-01
J874A_197706
This code applies to all types of self-propelled machinery. It covers five methods of determination as follows: Suspension Method Null Point Method Platform Support Reaction Method Reaction Method Balance Method
Standard

CENTER OF GRAVITY TEST CODE
1985-10-01
J874_198510
This SAE Standard applies to off-road self-propelled construction, forestry, and industrial machines as listed in categories 1, 2, and 4 of SAE J1116.
Standard

CENTER OF GRAVITY TEST CODE
1986-03-01
J874_198603
This SAE Standard applies to off-road self-propelled construction, forestry, and industrial machines as listed in categories 1, 2, and 4 of SAE J1116.
Standard

COMPONENT NOMENCLATURE - DUMPER TRAILER
1990-07-01
HISTORICAL
J734_199007
See the following sections of SAE J1057 for machine identification: See SAE J1016 for additional component nomenclature.
Standard

COMPONENT NOMENCLATURE - DUMPERS
1990-07-30
HISTORICAL
J1016_199007
This SAE Standard provides names of major components peculiar to dumpers as defined in SAE J1057 (see Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine. For component nomenclature for dumper trailers, refer to SAE J734.
Standard

COUNTERSUNK SQUARE HOLES FOR CUTTING EDGES AND END BITS
1986-07-01
HISTORICAL
J740_198607
To be used on cutting edges and end bits in conjunction with No. 3 head plow bolts (Ref. ANSI B18.9) typically used on off-road self-propelled work machines as described in SAE J1116. Cutting edges are further defined in SAE J737, J739 and J1304. End bits are further defined in SAE J63. 1 When section thickness exceeds A in drawing 1 (Figure 2) (countersunk one side) or B in drawing 4 (countersunk both sides), use counterbore with diameter D, as shown in cross section drawings 2, 5 and 6, or extended countersink C, as shown in cross section drawings 3 and 7. 2 The inscribed circle of the square holes shall be concentric with countersink or counterbore within 0.03 in (0.8 mm).
Standard

CUTTING EDGE - CROSS SECTIONS LOADER STRAIGHT
1985-02-01
HISTORICAL
J1303_198502
For cutting edges used on buckets for loaders defined in SAE J1057a. The dimensions are applicable to rolled, cast, forged, flame cut, and machined cutting edge sections. Straight cutting edges are defined as those whose leading edge and rear edge are parallel and, thus, are of constant cross section. For "straight cutting edge sections with bolt holes," see SAE J1304 FEB85.
Standard

CUTTING EDGE - CURVED GRADER
1986-06-01
HISTORICAL
J739_198606
This standard is intended for curved cutting edge sections used on graders as defined in SAE J870 and J1057. These cutting edges are further defined in SAE J740 for hole conformation.
Standard

CUTTING EDGE—CROSS SECTIONS LOADER STRAIGHT WITH BOLT HOLES
1985-02-01
HISTORICAL
J1304_198502
For cutting edges used on buckets for loaders defined in SAE J1057a. The dimensions are applicable to rolled and machined sections only. Cutting edge cross section thickness is limited to a maximum of 35 mm. Bolt-on tooth adapters are rarely used on loader buckets with cutting edge thicknesses in excess of 35 mm. This recommended practice applies only to straight cutting edges defined as those whose leading edge and rear edge are parallel and thus are of constant cross section. Overall cross sections to which bolt holes were added as indicated by this recommended practice were selected from those indicated per "Cutting Edge—Cross Sections Loader Straight," SAE J1303 FEB85. Selection was based on minimum section width requirements to accommodate bolt-on tooth adapters.
Standard

CUTTING EDGE—CURVED GRADER
1991-06-01
HISTORICAL
J739_199106
This SAE Standard is intended for curved cutting edge sections used on graders as defined in SAE J870 and J1057. (See Figure 1 and Table 1.) Hole conformation is further defined in SAE J740 and J1580.
Standard

CUTTING EDGE—DOUBLE BEVEL CROSS SECTIONS
1986-06-01
HISTORICAL
J738_198606
This standard is for cutting edge sections typically used in earthmoving machinery defined in SAE J1507: a Tractor - Scrapers as defined in SAE J728. b Dozers as described in SAE J729 and J173. c Loaders as described in SAE J731. d Graders as described in SAE J870. Hole spacing is defined for dozers and scrapers in J737 and graders in J739. Hole conformation is defined in J740.
123Next >Last >>
X