Refine Your Search

Date

Date

Topic

Topic

MTC1, Earthmoving Machinery Management and Organizations Medical equipment and supplies Hazards and emergency operations Fixed-wing aircraft Aircraft

Search Results

Viewing 1 to 20 of 89
123Next >Last >>
Sort by title
Standard

CAPACITY RATING—DOZER BLADES
1988-03-01
HISTORICAL
J1265_198803
This standard applies only to straight, angling, semi-U, and U-blades for crawler and wheel tractors. It applies to angling blades only in the straight (not angled) position.
Standard

CAPACITY RATING—ELEVATING SCRAPERS
1993-06-01
HISTORICAL
J957_199306
This SAE Standard specifies a procedure for approximating the volume of a typical material carried in the bowl of an elevating scraper as defined in SAE J728 and SAE J1057. The volumes are based on the inside dimensions of the bowl and a representative volume on top of the bowl. This rating method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific application.
Standard

CAPACITY RATING—LOADER BUCKET
1985-02-01
HISTORICAL
J742_198502
This standard applies to buckets of loaders (as defined by SAE J1057a, Identification Terminology of Earthmoving machines).
Standard

CAPACITY RATING—SCRAPER, OPEN BOWL
1993-06-01
HISTORICAL
J741_199306
This SAE Standard specifies a procedure for approximating the volume of typical materials contained in the bowl of Open Bowl scrapers as defined in SAE J728 and SAE J1057. The volumes are based on the inside dimensions of the bowl and representative volumes on top of the bowl. This rating method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific application.
Standard

COMPONENT NOMENCLATURE - CONSTRUCTION TWO- AND FOUR-WHEEL TRACTORS
1990-07-30
HISTORICAL
J869_199007
This SAE Standard provides names of major components peculiar to tractors used with scrapers and dumpers. (See Figures 1 to 3.) Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

COMPONENT NOMENCLATURE - DUMPER TRAILER
1990-07-01
HISTORICAL
J734_199007
See the following sections of SAE J1057 for machine identification: See SAE J1016 for additional component nomenclature.
Standard

COMPONENT NOMENCLATURE - DUMPERS
1990-07-30
HISTORICAL
J1016_199007
This SAE Standard provides names of major components peculiar to dumpers as defined in SAE J1057 (see Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine. For component nomenclature for dumper trailers, refer to SAE J734.
Standard

COMPONENT NOMENCLATURE—GRADERS
1990-07-30
HISTORICAL
J870_199007
This SAE Standard provides names of major components peculiar to graders as defined in SAE J1057 (See Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

COMPONENT NOMENCLATURE—LOADER
1985-02-01
HISTORICAL
J731_198502
This standard includes names of major components and parts peculiar to this type machine. The illustrations are descriptive of the principles and are not intended to include all existing commercial machines. [Refer to SAE J1057 JUL73)—Identification Terminology of Earthmoving Machines for machine type.]
Standard

COMPONENT NOMENCLATURE—SCRAPERS
1990-07-01
HISTORICAL
J728_199007
This SAE Standard provides names of major components peculiar to the scraper portion of tractor-scrapers. Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

COUNTERSUNK SQUARE HOLES FOR CUTTING EDGES AND END BITS
1986-07-01
HISTORICAL
J740_198607
To be used on cutting edges and end bits in conjunction with No. 3 head plow bolts (Ref. ANSI B18.9) typically used on off-road self-propelled work machines as described in SAE J1116. Cutting edges are further defined in SAE J737, J739 and J1304. End bits are further defined in SAE J63. 1 When section thickness exceeds A in drawing 1 (Figure 2) (countersunk one side) or B in drawing 4 (countersunk both sides), use counterbore with diameter D, as shown in cross section drawings 2, 5 and 6, or extended countersink C, as shown in cross section drawings 3 and 7. 2 The inscribed circle of the square holes shall be concentric with countersink or counterbore within 0.03 in (0.8 mm).
Standard

CUTTING EDGE - CROSS SECTIONS LOADER STRAIGHT
1985-02-01
HISTORICAL
J1303_198502
For cutting edges used on buckets for loaders defined in SAE J1057a. The dimensions are applicable to rolled, cast, forged, flame cut, and machined cutting edge sections. Straight cutting edges are defined as those whose leading edge and rear edge are parallel and, thus, are of constant cross section. For "straight cutting edge sections with bolt holes," see SAE J1304 FEB85.
Standard

CUTTING EDGE—CROSS SECTIONS LOADER STRAIGHT WITH BOLT HOLES
1985-02-01
HISTORICAL
J1304_198502
For cutting edges used on buckets for loaders defined in SAE J1057a. The dimensions are applicable to rolled and machined sections only. Cutting edge cross section thickness is limited to a maximum of 35 mm. Bolt-on tooth adapters are rarely used on loader buckets with cutting edge thicknesses in excess of 35 mm. This recommended practice applies only to straight cutting edges defined as those whose leading edge and rear edge are parallel and thus are of constant cross section. Overall cross sections to which bolt holes were added as indicated by this recommended practice were selected from those indicated per "Cutting Edge—Cross Sections Loader Straight," SAE J1303 FEB85. Selection was based on minimum section width requirements to accommodate bolt-on tooth adapters.
123Next >Last >>
X