Refine Your Search

Date

Date

Topic

Topic

A-6C5 Components Committee Manufacturing Parts

Search Results

Viewing 1 to 20 of 24
12Next >Last >>
Sort by title
Standard

Aerospace - General Requirements for Hydraulic Relief Valves
2017-09-27
CURRENT
ARP4763
This SAE Aerospace Recommended Practice (ARP) is intended as a guide to define the requirements for aerospace hydraulic relief valves, including details pertinent to the design, performance, fabrication, and testing of the relief valves. NOTE 1: This ARP is for hydraulic system full-flow relief valves; ARP4835 has been developed to specifically cover thermal relief valves. NOTE 2: This document does not cover the modification of cracking pressure by external input; either hydraulic, electric, or pneumatic.
Standard

Aerospace - Valves, Check, Hydraulic, Aircraft and Missile
2000-10-01
HISTORICAL
ARP4946
This SAE Aerospace Recommended Practice (ARP) establishes the general requirements for spring-loaded, normally closed check valves for use in Type I, Type II, or Type III aircraft and missile hydraulic systems having nominal operating pressure shown in Table 1.
Standard

Aerospace Fluid Power-Hydraulic Thermal Expansion Relief Valves
2006-09-13
HISTORICAL
ARP4835
This SAE Aerospace Recommended Practice (ARP) establishes the general requirements for hydraulic thermal expansion relief valves used in aircraft and missile hydraulic systems having operating pressures and temperatures as identified in 1.2.
Standard

Aerospace-Hydraulic Switching Valve, Pressure or Pilot Operated
2008-02-07
CURRENT
ARP4741
This SAE Aerospace Recommended Practice (ARP) establishes the requirements for the design, manufacture, and qualification of four hydraulic switching valves used in airborne applications. Two are pressure operated, Type IA and IB and two are solenoid/pilot operated, Type IIA and IIB. They are applicable to four pressure classes 3000, 4000, 5000 and 8000 psi. The equipment as designed is intended to be installed in hydraulic systems designed to AS5440 for military applications or ARP4752 and ARP4925 depending on the type of aircraft for commercial applications. Additional or refined requirements shall be contained in the detail (procurement) specification and these shall take precedence over any potentially conflicting requirements of this ARP or documents referenced by this ARP.
Standard

Aerospace-Hydraulic Switching Valve, Pressure or Pilot Operated
2014-10-22
WIP
ARP4741A
This SAE Aerospace Recommended Practice (ARP) establishes the requirements for the design, manufacture, and qualification of four hydraulic switching valves used in airborne applications. Two are pressure operated, Type IA and IB and two are solenoid/pilot operated, Type IIA and IIB. They are applicable to four pressure classes 3000, 4000, 5000 and 8000 psi. The equipment as designed is intended to be installed in hydraulic systems designed to AS5440 for military applications or ARP4752 and ARP4925 depending on the type of aircraft for commercial applications. Additional or refined requirements shall be contained in the detail (procurement) specification and these shall take precedence over any potentially conflicting requirements of this ARP or documents referenced by this ARP.
Standard

Aerospace-Solenoid Valve, Hydraulic, Three Way, Two Position, Direct Acting
2002-07-02
HISTORICAL
ARP4945
This SAE Aerospace Recommended Practice (ARP) is intended as a guide to aid in the specifying and testing of direct acting three way, two position, single and multiple coil, normally open and normally closed solenoid valves used for the pilot actuation of hydraulic control systems and the control of hydraulic components. The information presented should be useful in standardizing terminology, in specifying requirements and performance parameters, and in defining test methods. The recommendations do not restrict or attempt to define the internal design features of solenoid valves. Standard mechanical, electrical and fluid porting interfaces are recommended to provide commonalty, interchangeability, design flexibility and to be more affordable. In general, this recommended practice is directed toward solenoid valves for use in military and commercial flight control and hydraulic actuation systems.
Standard

Aerospace-Solenoid Valve, Hydraulic, Three Way, Two Position, Direct Acting
2019-10-10
WIP
ARP4945B
This SAE Aerospace Recommended Practice (ARP) is intended as a guide to aid in the specifying and testing of direct acting three way, two position, single and multiple coil, normally open and normally closed solenoid valves used for the pilot actuation of hydraulic control systems and the control of hydraulic components. The information presented should be useful in standardizing terminology, in specifying requirements and performance parameters, and in defining test methods. The recommendations do not restrict or attempt to define the internal design features of solenoid valves. Standard mechanical, electrical and fluid porting interfaces are recommended to provide commonalty, interchangeability, design flexibility and to be more affordable. In general, this recommended practice is directed toward solenoid valves for use in military and commercial flight control and hydraulic actuation systems.
Standard

Aerospace-Solenoid Valve, Hydraulic, Three Way, Two Position, Direct Acting
2013-11-22
CURRENT
ARP4945A
This SAE Aerospace Recommended Practice (ARP) is intended as a guide to aid in the specifying and testing of direct acting three way, two position, single and multiple coil, normally open and normally closed solenoid valves used for the pilot actuation of hydraulic control systems and the control of hydraulic components. The information presented should be useful in standardizing terminology, in specifying requirements and performance parameters, and in defining test methods. The recommendations do not restrict or attempt to define the internal design features of solenoid valves. Standard mechanical, electrical and fluid porting interfaces are recommended to provide commonalty, interchangeability, design flexibility and to be more affordable. In general, this recommended practice is directed toward solenoid valves for use in military and commercial flight control and hydraulic actuation systems.
Standard

COILED TUBING, CORROSION RESISTANT STEEL, HYDRAULIC APPLICATIONS
1987-11-01
HISTORICAL
ARP584A
This recommended practice encompasses design, analysis, fabrication, and installation of pressurized plain metal tubing used in fluid power systems to provide relative motion. Specific data given are for MIL-T-6845 tubing ranging from 1/4 inch to 1 inch dia. used in 3000 psi hydraulic or pneumatic systems, Types I, II, III or IV applied to any type of vehicle. The flexible configurations of plain metal tubing are intended for application to actuators that oscillate about a pivot, to areas of large structural deflection such as reservoirs installation, and to areas of extreme environment where flexible hose could not survive.
Standard

Coiled Tubing - Corrosion Resistant Steel, Hydraulic Applications, Aerospace
2012-01-17
HISTORICAL
ARP584C
This SAE Aerospace Recommended Practice (ARP) addresses the design, installation, and testing of coiled tube assemblies ranging from 1/4 inch (6.3 mm) to 1.0 inch (25 mm) diameter using CRES tubing per AMS-T-6845, unless otherwise approved by the Procuring Activity. This ARP specifically details three different configurations of coiled tubing. These configurations should be compatible with pressure levels up to 3000 psi (20.7 MPa) upon the completion of the analysis for the actual stress and life requirement of the intended application. However, formal qualification tests are recommended to verify the satisfactory installation, clamping, and the life of each unique design. NOTE: Refer to ARP4146 for information on design of coiled tube assemblies using Titanium tubing.
Standard

Coiled Tubing - Corrosion Resistant Steel, Hydraulic Applications, Aerospace
2017-06-16
CURRENT
ARP584D
This SAE Aerospace Recommended Practice (ARP) addresses the design, installation, and testing of coiled tube assemblies ranging from 1/4 inch (6.3 mm) to 1.0 inch (25 mm) diameter using CRES tubing per AMS-T-6845, unless otherwise approved by the Procuring Activity. This ARP specifically details three different configurations of coiled tubing. These configurations should be compatible with pressure levels up to 3000 psi (20.7 MPa) upon the completion of the analysis for the actual stress and life requirement of the intended application. However, formal qualification tests are recommended to verify the satisfactory installation, clamping, and the life of each unique design. NOTE: Refer to ARP4146 for information on design of coiled tube assemblies using Titanium tubing.
Standard

Coiled Tubing, Corrosion Resistant Steel, Hydraulic Applications, Aerospace
2002-08-01
HISTORICAL
ARP584B
This SAE Aerospace Recommended Practice (ARP) encompasses design, analysis, fabrication, and installation of pressurized metal tubing used in fluid power systems to provide relative motion. Specific data given are for MIL-T-6845 tubing ranging from 1/4 to 1 in (6.3 to 25 mm) to diameter used in 3000 psi (20.7 MPa) hydraulic or pneumatic system, Military Type I, II, III, or IV hydraulic systems applied to any type of vehicle. For information on design of coiled tube assemblies using Ti-3Al-2.5CWSR tubing, see ARP4146. The flexible configurations of tubing are intended for application to actuators that oscillate about a pivot, to areas of large structural deflection such as reservoirs installation, and to areas of extreme environment where flexible hose could not survive.
Standard

General Requirements for Hydraulic System Reservoirs
2018-06-11
CURRENT
AS5586A
This SAE Aerospace Standard (AS) specifies the general requirements for hydraulic system reservoirs that are installed in commercial and military aircraft and helicopters and also in missile hydraulic systems. This document includes design, test (production and qualification) criteria for various types of reservoirs. Appendix A provides information on hydraulic fluid volume requirements and reservoir sizing. This document also provides a basis for the Procurement Specification to completely define individual reservoir requirements.
Standard

Pump, Hydraulic, Ram, Hand Driven
2001-11-14
HISTORICAL
AS55151
This specification covers hand driven, hydraulic ram pumps used on type I (-65° to +160°F) aircraft hydraulic systems.
Standard

Pump, Hydraulic, Ram, Hand Driven
2004-08-04
CURRENT
AS55151A
This specification covers hand driven, hydraulic ram pumps used on type I (-65° to +160°F) aircraft hydraulic systems.
Standard

RECOMMENDED PRACTICE FOR THE DESIGN OF TUBING INSTALLATIONS FOR AEROSPACE FLUID POWER SYSTEMS
1991-11-01
HISTORICAL
ARP994
This document is a compendium of recommended practices for the design of tubing systems for the transmission of liquid and gasses influid power systems for aerospace vehicles such as aircraft, missiles and boosters, and is considered applicable to the design of future space vehicles and other applications using aircraft technology. Primary emphasis is given to recommended practices for line sizing, tube routing, supports and clamping, stress considerations and permissible defects, and provisions for flexure through the use of flexible hoses, coiled tubes, swivel joints, and expansion glands. Fluid power systems are differentiated from the normal aircraft fuel and oil systems and the various fluid systems used for environmental control and air conditioning systems; however, the practices cited herein will in many cases be applicable to these other systems.
12Next >Last >>
X