Refine Your Search

Date

Date

Topic

Topic

Manufacturing Fasteners Committee Simulation and modeling

Search Results

Viewing 1 to 20 of 136
123Next >Last >>
Sort by title
Standard

Blind Rivets - Break Mandrel Type
2013-04-15
HISTORICAL
J1200_201304
This SAE Standard establishes the dimensional, mechanical, and performance requirements of inch and metric break mandrel blind rivets suitable for use in joining the component parts of an assembly.
Standard

Blind Rivets—Break Mandrel Type
1998-05-01
HISTORICAL
J1200_199805
This SAE Standard establishes the dimensional, mechanical, and performance requirements of inch and metric break mandrel blind rivets suitable for use in joining the component parts of an assembly.
Standard

CONICAL SPRING WASHERS
1976-02-01
HISTORICAL
J773B_197602
This SAE Standard covers dimensional, material, and general specifications and methods of test for two types of general, purpose conical spring washers, designated type L and type H. for use as loose washers over screws and bolts, and also for use as pre-assembled washers in screw and washer assemblies.
Standard

CONICAL SPRING WASHERS
1976-02-01
HISTORICAL
J773_196106
This standard covers two types of general purpose conical spring washers, designated as Type L and Type H, for use as loose washers over screws and bolts, and also for use as preassembled washers on washer and screw or bolt assemblies. The Type L series is for use on screw or bolt assemblies having an ultimate strength range of 50,000 to 69,000 psi, and the Type H series is for use on screw or bolt assemblies having an ultimate strength in the area of 120,000 psi. The specification of sizes and types in this SAE Standard does not necessarily indicate that all sizes and types are available from stock. Users should consult with manufacturers for availability.
Standard

CONICAL SPRING WASHERS
1998-05-01
HISTORICAL
J773_199805
This SAE Standard covers dimensional, material, and general specifications and methods of test for two types of general purpose conical spring washers, designated type L and type H, for use as loose washers over screws and bolts, and also for use as pre-assembled washers in screw and washer assemblies.
Standard

Conical Spring Washers
2016-08-31
CURRENT
J773_201608
This SAE Standard covers dimensional, material, and general specifications and methods of test for two types of general purpose conical spring washers, designated type L and type H, for use as loose washers over screws and bolts, and also for use as pre-assembled washers in screw and washer assemblies.
Standard

DECARBURIZATION IN HARDENED AND TEMPERED METRIC THREADED FASTENERS
1996-08-01
HISTORICAL
J121M_199608
This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.
Standard

DECARBURIZATION IN HARDENED AND TEMPERED METRIC THREADED FASTENERS
1997-04-01
HISTORICAL
J121M_199704
This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.
Standard

DECARBURIZATION IN HARDENED AND TEMPERED METRIC THREADED FASTENERS
1994-05-26
HISTORICAL
J121M_199405
This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.
Standard

DECARBURIZATION IN HARDENED AND TEMPERED THREADED FASTENERS
1983-08-01
HISTORICAL
J121_198308
This recommended practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.
Standard

DECARBURIZATION IN HARDENED AND TEMPERED THREADED FASTENERS
1976-07-01
HISTORICAL
J121A_197607
This recommended practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.
Standard

DECARBURIZATION IN HARDENED AND TEMPERED UNIFIED THREADED FASTENERS
1997-04-01
HISTORICAL
J121_199704
This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.
Standard

DECARBURIZATION IN HARDENED AND TEMPERED UNIFIED THREADED FASTENERS
1996-08-01
HISTORICAL
J121_199608
This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.
Standard

DECARBURIZATION IN HARDENED AND TEMPERED UNIFIED THREADED FASTENERS
1996-05-01
HISTORICAL
J121_199605
This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.
Standard

DECARBURIZATION IN HARDENED AND TEMPERED UNIFIED THREADED FASTENERS
1994-05-01
HISTORICAL
J121_199405
This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.
Standard

DRYSEAL PIPE THREADS
1961-06-01
HISTORICAL
J476A_196106
The Dryseal American Standard Taper Pipe Thread, the Dryseal American Fuel Internal Straight Pipe Thread and the Dryseal American Intermediate Internal Straight Pipe Thread covered by this standard conform with the American Standard ASA-B2.2. The Dryseal SAE-Short Taper Pipe Thread in this standard conforms with the Dryseal American Standard Taper Pipe Thread except for the length of thread, which is shortened for increased clearance and economy of material. The significant feature of the Dryseal thread is controlled truncation at the crest and root to assure metal to metal contact coincident with or prior to flank contact. Contact at the crest and root prevents spiral leakage and insures pressure-tight joints without the use of a lubricant or sealer. Lubricants, if not functionally objectionable, may be used to minimize the possibility of galling in assembly.
Standard

Decarburization in Hardened and Tempered Metric Threaded Fasteners
2013-01-02
CURRENT
J121M_201301
This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.
Standard

Decarburization in Hardened and Tempered Unified Threaded Fasteners
2013-01-02
CURRENT
J121_201301
This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.
123Next >Last >>
X