Refine Your Search

Date

Date

Topic

Topic

Materials Forming Extrusion Glazing Materials Standards Committee Heat resistant materials

Search Results

Viewing 1 to 20 of 43
123Next >Last >>
Sort by title
Standard

AUTOMOTIVE GLAZING
1967-08-01
HISTORICAL
J673A_196708
This SAE Recommended Practice is intended to cover current safety glazing practice and usage of safety glazing materials in motor vehicles. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are included principally for the guidance of body engineers and designers.
Standard

AUTOMOTIVE SAFETY GLASSES
1993-04-07
HISTORICAL
J673_199304
This SAE Recommended Practice is intended to cover current safety glazing practice applicable to safety glasses for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are included principally for the guidance of body engineers and designers. For additional information on safety glazing materials for use in motor vehicles and motor vehicle equipment, see SAE J674.
Standard

AUTOMOTIVE SAFETY GLAZING
1976-06-01
HISTORICAL
J673B_197606
This SAE Recommended Practice is intended to cover current safety glazing practice and usage of safety glazing materials in motor vehicles. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are included principally for the guidance of body engineers and designers. Because of the limited usage and experience with plastic safety glazing materials in motor vehicles, this recommended practice has been confined to safety glass glazing. For additional information on safety glazing materials for motor vehicles, see SAE J674.
Standard

AUTOMOTIVE SAFETY GLAZING
1983-11-01
HISTORICAL
J673_198311
This SAE Recommended Practice is intended to cover current safety glazing practice and usage of safety glazing materials in motor vehicles. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are included principally for the guidance of body engineers and designers. Because of the limited usage and experience with plastic safety glazing materials in motor vehicles, this recommended practice has been confined to safety glass glazing. For additional information on safety glazing materials for motor vehicles, see SAE J674.
Standard

Automotive Safety Glasses
2005-10-12
HISTORICAL
J673_200510
This SAE Recommended Practice is intended to cover current safety glazing practice applicable to safety glasses for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are included principally for the guidance of body engineers and designers. For additional information on safety glazing materials for use in motor vehicles and motor vehicle equipment, see SAE J674.
Standard

Automotive Safety Glazing Materials
2015-06-18
HISTORICAL
J673_201506
This SAE Recommended Practice is intended to cover current safety glazing practice applicable to safety glazing for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are included principally for the guidance of body engineers and designers.
Standard

Automotive Safety Glazing Materials
2021-07-16
CURRENT
J673_202107
This SAE Recommended Practice is a guidance document, which covers current safety glazing materials applicable for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are included. This guidance document does not precede or replace customer specifications and requirements.
Standard

Intrusion Resistance of Safety Glazing Systems for Road Vehicles
2003-02-12
HISTORICAL
J2568_200302
This SAE Recommended Practice specifies an intrusion resistance test method for glazing systems installed in motor vehicles. Intrusion resistance performance is determined not solely by the glazing but also by the glazing attachment to the vehicle and by the vehicle structure. Therefore, the glazing/ attachment /vehicle structure must be tested as a single unit. This test determines intrusion resistance only. The test applies to those materials that meet the requirements for use as safety glazing materials as specified in Safety Standard ANSI/SAE Z26.1 or other applicable standards. The test applies to all installation locations.
Standard

Intrusion Resistance of Safety Glazing Systems for Road Vehicles
2011-06-30
HISTORICAL
J2568_201106
This SAE Recommended Practice specifies an intrusion resistance test method for glazing systems installed in motor vehicles. Intrusion resistance performance is determined not solely by the glazing but also by the glazing attachment to the vehicle and by the vehicle structure. Therefore, the glazing/ attachment/vehicle structure must be tested as a single unit. This test determines intrusion resistance only. The test applies to those materials that meet the requirements for use as safety glazing materials as specified in Safety Standard ANSI/SAE Z26.1 or other applicable standards. The test applies to all installation locations.
Standard

Intrusion Resistance of Safety Glazing Systems for Road Vehicles
2020-10-19
CURRENT
J2568_202010
This SAE Recommended Practice specifies an intrusion resistance test method for glazing systems installed in motor vehicles. Intrusion resistance performance is determined not solely by the glazing but also by the glazing attachment to the vehicle and by the vehicle structure. Therefore, the glazing/attachment/vehicle structure must be tested as a single unit. This test determines intrusion resistance only. The test applies to those materials that meet the requirements for use as safety glazing materials as specified in ANSI/SAE Z26.1 or other applicable standards. The test applies to all installation locations.
Standard

Intrusion Resistance of Safety Glazing Systems for Road Vehicles
2001-04-24
HISTORICAL
J2568_200104
This SAE Recommended Practice specifies an intrusion resistance test method for glazing systems installed in motor vehicles. Intrusion resistance performance is determined not solely by the glazing but also by the glazing attachment to the vehicle and by the vehicle structure. Therefore, the glazing/ attachment /vehicle structure must be tested as a single unit. This test determines intrusion resistance only. The test applies to those materials that meet the requirements for use as safety glazing materials as specified in Safety Standard ANSI/SAE Z26.1 or other applicable standards. The test applies to all installation locations.
Standard

LUMINOUS REFLECTANCE IN SAFETY GLAZING MATERIALS FOR ROAD VEHICLES
1995-09-01
HISTORICAL
J2134_199509
The scope of this SAE Recommended Practice is to provide a simple, practical, and broadly applicable test procedure for appraising luminous Illuminant A reflectance of enhanced reflecting safety glazing materials for road vehicles.
Standard

Luminous Reflectance in Safety Glazing Materials for Road Vehicles
2005-07-12
HISTORICAL
J2134_200507
The scope of this SAE Recommended Practice is to provide a simple, practical, and broadly applicable test procedure for appraising luminous Illuminant A reflectance of enhanced reflecting safety glazing materials for road vehicles.
Standard

Luminous Reflectance in Safety Glazing Materials for Road Vehicles
2012-12-07
HISTORICAL
J2134_201212
The scope of this SAE Performance Standard is to provide a simple, practical, and broadly applicable test procedure for appraising luminous Illuminant A reflectance of reflecting safety glazing materials for road vehicles. This SAE Performance Standard, which provides a simple test procedure widely used in the optics field, may be used to measure the reflectivity which films applied to safety glazing materials for road vehicles may enhance. This test procedure applies to conditions where feasibility, rather than accuracy of measurement, is of prime importance. Measurements can be made outside laboratories in a quality control environment and in similar applications, when glazings, instead of small test specimens, have to be tested.
123Next >Last >>
X