|
1.
|
2007-01-3810 : Literature Data and Corrosion Testing of Hard Anodized and Duplex Sealed 7075-T7351 and 7050-T7451 Wrought Aluminum Alloy Plates after Cyclic Loading
|
09/17/2007
|
Paper
|
|
...final thermo-mechanical and tempering treatment. Many surface modification techniques are used to protect these alloys against general, exfoliation and pitting corrosion. Hard anodizing is a surface modification technique that imparts corrosion and wear resistance to 7000-series aluminum alloy parts. However, if the anodized parts experience...
|
|
Author(s): Winston Sequeira, Mike Jensen, Eric Peterson, Steven Thieman |
|
|
2.
|
930708 : Aluminum Alloy DeltalloySt 4032: Elimination of Anodizing for Wear Resistant Applications
|
03/01/1993
|
Paper
|
|
...for potential users by eliminating anodizing. In particular, cost savings are realized by eliminating hard-coat anodizing, lower work-in-process inventories...
|
|
Author(s): David W. Hohman |
|
|
3.
|
920944 : Boric/Sulfuric Acid Anodize-Alternative to Chromic Acid Anodize
|
04/01/1992
|
Paper
|
|
...presented information on boric acid/sulfuric acid anodizing (BSAA) as a replacement for chromic acid anodizing (CAA) to meet environmental regulations. This paper...BSAA for MIL-A-8625, Type IC (anodizing, non-chromic acid, meeting type I requirements...
|
|
Author(s): Rodney Koop, Yukimori Moji |
|
|
4.
|
910934 : A Method for On-Aircraft Anodizing: Phos-Anodizing Containment System
|
02/01/1991
|
Paper
|
|
...The phos-anodizing containment system (PACS) provides a safe, effective method for on-aircraft anodizing...phos-anodizing containment system (PACS) provides a safe, effective method for on-aircraft anodizing. The system can be used to anodize vertical, horizontal, and even inverted...
|
|
Author(s): E. A. (Bud) Westerman, David F. Taylor |
|
|
5.
|
J399 : Anodized Aluminum Automotive Parts
|
02/01/1985
|
Standard
|
|
...is a medium strength bright anodizing extrusion alloy; Alloy X7016 is a high strength bright anodizing extrusion alloy primarily suited for...
|
|
Committee: Metals Technical Executive Steering Committee |
|
|
6.
|
720341 : Applications of Hard Anodizing At Cessna
|
02/01/1972
|
Paper
|
|
...covers the properties of hardcoat anodizing as it applies to changing...post treatments is presented. Hardcoat anodizing changes the surface properties of...
|
|
Author(s): Marvin Hatch |
|
|
7.
|
970014 : Anodized Aluminum, An Alternative to Glass Visor Vanity Mirrors
|
02/24/1997
|
Paper
|
|
Over the years, silver- or chrome-coated glass has become the dominant material used for automotive visor vanity mirrors. Its durable surface and good reflective qualities made it the material of choice. Specifications...
|
|
Author(s): John Adams |
|
|
8.
|
840293 : An Improved Anodizing Practice for Aluminum Bumpers
|
02/01/1984
|
Paper
|
|
...aluminum bumpers. It gives an account of the work done in the determination of yellow tinge intensity and abrasion resistance associated with different anodizing conditions, leading to the final selection of an optimum practice. It includes the subsequent verification in production plant trials as well as approval...
|
|
Author(s): Dan Fern, M. A. Jozefowicz, Junior Lott, Gilbert Huey, Paul Ling |
|
|
9.
|
820603 : Improved Chromic Acid Anodize Seal for Optimum Paint Adhesion
|
02/01/1982
|
Paper
|
|
A new anodize sealing process using a dilute solution of chromic acid and metal chromates in deionized water has been developed. Use of this process to seal chromic acid anodize layers gives films that have excellent ...
|
|
Author(s): Y. Moji |
|
|
10.
|
1999-01-0925 : The Mechanical Properties of Anodized Magnesium Die Castings
|
03/01/1999
|
Paper
|
|
...Magnesium anodizing processes have been reported to affect the strength of the underlying metal adversely...research in this area, recent studies have shown that at least one magnesium anodizing process may, in fact, assist in achieving more favorable mechanical properties in magnesium...
|
|
Author(s): Philip N. Ross, John A. MacCulloch |
|
|
11.
|
J1974 : Decorative Anodizing Specification for Automotive Applications
|
06/01/1993
|
Standard
|
|
Form Detailed in this SAE Recommended Practice are interior and exterior bright or electrolytically colored anodized aluminum automotive components in the form of seat trim, dashboard, window or side body moldings, ...
|
|
Committee: Materials, Processes and Parts Council |
|
|
12.
|
900953 : An Alternative to Chromic Acid Anodizing
|
04/01/1990
|
Paper
|
|
...of hardware manufacture. This paper describes the efforts of Boeing Commercial Airplanes in developing a more environmentally suitable alternative process to chromic acid anodizing. Several alternative processes were evaluated prior to selection of a boric-sulfuric acid anodize (BSAA) process. Results of screening tests (including corrosion resistance...
|
|
Author(s): T. D. Leland, Y. Moji |
|
|
13.
|
2000-01-1124 : Corrosion Fatigue of Anodized Am50a Magnesium Die Castings
|
03/06/2000
|
Paper
|
|
...of magnesium alloys. The coating - "Anomag," is produced by an anodizing method and gives excellent corrosion resistance in chemical media. Standard...also showed that there were no negative effects of "Anomag" anodizing on corrosion fatigue performance....
|
|
Author(s): Philip N. Ross |
|
|
14.
|
830389 : Color Anodized Aluminum Automotive Components
|
02/01/1983
|
Paper
|
|
...finishes are reviewed and results of accelerated and long term corrosion tests discussed. The practicalities of introducing the process into a typical bright anodizing line are considered. The economics of producing ANOLOK finishes along with alternative methods of producing colored finishes are outlined and desirable improvements to...
|
|
Author(s): E. P. Short, D. Fern, W. M. Kellermann |
|
|
15.
|
820383 : The Use of Reynolds Tru-Color Anodized Aluminum Products in the Automotive Industry
|
02/01/1982
|
Paper
|
|
Reynolds Tru-Color anodized product process offers a number of advantages when compared to standard integral hard coat processes. Tru-Color uses less energy, and offers a range of tones from champagne to black in hard ...
|
|
Author(s): Donald M. Rose, Adam Walsh, Richard Mahn, Gordon Allen |
|
|
16.
|
670490 : Low Gloss Finishes for Anodized Aluminum Trim in Field of Vision of the Driver
|
02/01/1967
|
Paper
|
|
This paper explains the reflectance characteristics of anodized aluminum and describes the finishing treatments which produce the desired low glow appearance required by The Proposed Federal Motor Vehicles Safety ...
|
|
Author(s): Frank W. Baker |
|
|
17.
|
ARP1575 : Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding, Hand Applied Phosphoric Acid Anodizing (NONCURRENT Mar 2007)
|
03/13/2007
|
Standard
|
|
...This document describes a hand-applied, nontank, phosphoric acid anodizing process for surface preparation of aluminum alloys required to achieve optimum bondline durability for structural adhesive bonding....
|
|
Committee: AMS B Finishes Processes and Fluids Committee |
|
|
18.
|
AMS2642 : Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure
|
09/22/2005
|
Standard
|
|
This specification covers a procedure for revealing the macrostructure and microstructure of selected titanium alloys.
|
|
Committee: AMS B Finishes Processes and Fluids Committee |
|
|
19.
|
AS7108/2 : National Aerospace and Defense Contractors Accreditation Program (Nadcap) Requirements for Etch Processes (Macrostructure, Nital, Temper, Blue Etch Anodize) (Cancelled Apr 2005)
|
04/26/2005
|
Standard
|
|
This Aerospace Standard (AS) establishes the requirements for suppliers for Etching Processes to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). These requirements may be ...
|
|
Committee: Nadcap Management Council |
|
|
20.
|
910920 : Ion Exchange Systems for Chromic Acid Recovery and Purification From Plating and Anodizing Operations
|
02/01/1991
|
Paper
|
|
Chromic acid losses through dragout, bath dumps, and fume scrubber blowdown result in waste treatment expense, bath replacement, and environmental liabilities. Purification of the bath can eliminate bath dumping and ...
|
|
Author(s): Joe Leatherdale, Michael Dejak |
|
|
21.
|
660373 : Measurement and Evaluation of Anodized Aluminum Surfaces on Evaporative Rate Analysis
|
02/01/1966
|
Paper
|
|
|
|
Author(s): J. L. Anderson |
|
|
22.
|
660374 : Some Factors Affecting the Response of Anodized Aluminum to the Cass Test
|
02/01/1966
|
Paper
|
|
|
|
Author(s): C. E. Michelson, D. C. Montgomery, P. D. Stransky |
|
|
23.
|
640085 : New quality control test for anodized aluminum
|
01/01/1964
|
Paper
|
|
|
|
Author(s): E. T. Englehart, G. Sowinski, Jr. |
|
|
24.
|
2008-36-0378 : Diesel Engine Emission Reduction Applying Cerium Nanometric and Cerium Oxide in Piston Hard Anodized
|
10/07/2008
|
Paper
|
|
The Cerium Nanometric Properties applied in piston head promote a catalystic reaction in combustion chamber and avoid the Particulate Matter (PM) and Nitrogen Oxide (NOx) formation. The reaction as a result of material ...
|
|
Author(s): Sergio Roberto Amaral, Claudio Marcio de Souza Oliveira, Gilberto Abu Gannam |
|
|
25.
|
932229 : Advancements in Long-Life Thermal Control Coatings for Low Earth Orbit Applications
|
07/01/1993
|
Paper
|
|
The Space Station Freedom program requires long-life thermal control coatings that are stable in low Earth orbit (LEO). To provide designers with a variety of coatings and optical properties, improvements were made to ...
|
|
Author(s): Steven A. Daneman, Henry W. Babel, Marguerite M. Thomlinson |
|
