SAE members get discounts
on most products priced under $500.

Join SAE today and start saving!

www.sae.org
SAE International

SAE Papers

Paper Number / Title
For more information, click on the Paper Number
Book Number
2008-01-1650
Numerical Investigation on Fluid Flow of Gear Lubrication
 
2008-01-1654
Remaining lifetime Evaluation for Crankshaft Main Bearings
 
2008-01-1647
Simulated Analysis of a Motorbike High Performance Lubrication Circuit
 
2007-01-1567
Adaptation of a Variable Displacement Vane Pump to Engine Lube Oil Applications
 
2007-01-1570
Basic Characteristics of Lead-free Aluminum Alloy Bearings with Low Frictional Property of Adhered Molybdenum Disulfide
 
2007-01-1569
Development of Lead Free Copper Based Alloy for Bushing Under Boundary Lubrication
 
2007-01-1565
Development of an Oil Deterioration Monitoring System by Estimating Base Number
 
2007-01-1566
Engine Wear Modeling with Sensitivity to Lubricant Chemistry: A Theoretical Framework
 
2007-01-0113
Influence of Electrical Current on Bearing Flaking Life
SP-2134  
2007-01-1248
Investigations of Crank Offset and It's Influence on Piston and Piston Ring Friction Behavior Based on Simulation and Testing
 
2007-01-1246
Mixed Lubrication and Roughness Surface Effects Application to Piston Rings
 
2007-01-1440
Modeling and Measurement of Tribological Parameters between Piston Rings and Liner in Turbocharged Diesel Engine
 
2007-01-1568
Robust Optimization of Engine Lubrication System
 
2007-01-1250
The Effects of Piston Rings and Liner Break-in on Lubricating Condition
 
2006-01-0428
Application to Engine Development of Friction Analysis by Piston Secondary Motion Simulation in Consideration of Cylinder Block Bore Distortion
 
2006-01-1105
Development of Lead Free Copper Based Alloy for Piston Pin Bushing Under Higher Load Engines
 
2006-01-0646
Evaluation of Cost Effective Coatings for Automotive Piston and Pin Assemblies
 
2006-01-1097
Lead-Free Replacements for SAE 792 in Bushing Applications
 
2006-01-1103
Newly Development Lead Free Copper Alloy Bushing for Fuel Injection Pump
 
2006-01-1102
Plain Bearings in High Performance Engines - Simulation Tools for Advanced Investigations and Layouts
 
2006-01-1099
Raman Characterization of Anti-Wear Films Formed from Fresh and Aged Engine Oils
 
2006-01-1101
Small End Conrod Lubrication
 
2006-01-1104
Studies on Lead-free Resin Overlay for Engine Bearings
 
2006-01-0358
The Effects of Cage Flexibility on Ball-to-Cage Pocket Contact Forces and Cage Instability in Deep Groove Ball Bearings
 
2006-01-0357
The Impact of Some Gear Lubricants on the Surface Durability of Rolling Element Bearings
 
2006-01-0648
The Measurement of Liner - Piston Skirt Oil Film Thickness by an Ultrasonic Means
 
2006-01-1098
Wear of Valve Train Components Due to Soot Contaminated Lubricant
 
2005-01-1866
A New Family of Lead-Free Aluminum-Base Engine Bearing Alloys
 
2005-01-1869
Advanced Bearing Solutions for Enhancing the Fuel Efficiency and Improving the Noise, Vibration and Harshness Behavior of Modern Automotive Driveline Applications
 
2005-01-1863
Development of Lead Free Overlay for Three Layer Bearings of Highly Loaded Engines
 
2005-01-1867
Development of Oil Aeration Meter for Internal Combustion Engine
 
2005-01-1652
Engine Friction Reduction Through Liner Rotation
 
2005-01-1865
Maintenance Free and Low Maintenance Plain Bearings for Added Car Comfort
 
2005-01-1864
Modelling of the Asperity Contact Area on Actual 3D Surfaces
 
2005-01-1647
Research Into Surface Improvement for Low Friction Pistons
 
2005-01-1868
Research Work for Clarifying the Mechanism of White Structure Flaking and Extending the Life of Bearings
 
2004-01-2693
Preload Adjustments of Wheel Bearings on Tractor-Trailer Combinations - The Factors of Compliance
 
2004-01-1600
Development of Lead Free Copper Based Alloy for Three Layers Bearings under Higher Load Engines
 
2004-01-1602
Displacement vs Flow Control in IC Engines Lubricating Pumps
 
2004-01-1599
INFLUENCE OF DESIGN PARAMETERS ON THE LUBRICATION OF A HIGH SPEED CONNECTING ROD BEARING
 
2004-01-1601
Modelling and Simulation of Variable Displacement Vane Pumps for IC Engine Lubrication
 
2003-01-3743
Angular Contact Ball Bearings for a Rear Axle Differential
 
2003-01-3611
Corrotect® Rust Prevention for Rolling Bearings and Precision Parts
 
2003-01-3552
Dynamic analysis of flexible couplings in rotor-bearing-coupling systems
 
2003-01-3557
Finite Difference Model for Journal Bearings Applied in the Camshaft Support Elements
 
2003-01-3668
High Performance Ball Joint
 
2003-01-0243
A Study for Measurement of Oil Film Thickness on Engine Bearing by using Laser Induced Fluorescence (LIF) Method
 
2003-01-0245
Journal Bearing Analysis in Engines Using Simulation Techniques
 
2003-01-0244
New Conceptual Lead Free Overlays Consisted of Solid Lubricant for Internal Combustion Engine Bearings
 
2003-01-1387
The Impact of Axial Bearing Profile on Engine Bearing Performance
 
2002-32-1848
79 Study on Bearing Lubricity of Two-cycle Engine Oil
 
2002-01-1369
Experimental and Analytical Methods for Assessing Bearing Performance Under Debris Contaminated Lubrication Conditions
 
2002-01-1372
Metrics and Conversions for Process Quality
 
2002-01-1370
Off-Highway Truck Wheel Bearing Performance Testing
 
2002-01-1371
The Effect of Microstructure on Debris Dented Rolling Element Bearing Performance
 
2002-01-1314
A New Concept Thrust Washer for Gasoline & Diesel Engines
 
2002-01-0296
A Study of Oil Film Pressure Distribution on Connecting Rods Big Ends
 
2002-01-0297
Experimental Study for High Specific Load Bearings in the Diesel Engine
 
2002-01-1315
Lubrication and Ventilation System of Modern Engines - Measurements, Calculations and Analysis
 
2002-01-0298
Parametric Study for Design Factors on Engine Bearings by using TEHL Analysis
 
2002-01-1319
The Controlled Vane-Type Oil Pump for Oil Supply on Demand for Passenger Car Engines
 
2002-01-0295
The Effect of Crankshaft Flexibility on the EHL of Connecting Rod Bearings
PT-100  
2002-01-1316
The Progression of Engine Bearing Overlays
 
2002-01-0299
Universal Joint Grease Development
 
2001-01-1075
A New Transient Elastohydrodynamic (EHD) Bearing Model Linkable to ADAMS®
 
2001-01-1079
Analysis of the Frequency, Causes and Consequences of a Common Quality Problem in the Babbit Coating of Trimetal Journal Bearings
 
2001-01-1073
Engine Lubrication System Model for Sump Oil Temperature Prediction
 
2001-01-1077
New Aluminum Alloy Bearing with Higher Wear Resistance
 
2001-01-1074
Oil Aeration in Combustion Engines - Analysis and Optimization
 
2001-01-1076
Theoretical Analysis of Engine Bearing Considering Both Elastic Deformation and Oil Film Temperature Distribution
 
2000-01-3299
Bearings Performance Simulation with Elasto-Hydrodynamic Lubrication (EHL) Model.
 
2000-01-3189
Linear Model Updating Applied to Rotating Machines
 
2000-01-2603
Comparison of Plain Bushing Technologies for Reduced Grease Consumption in Construction Equipment
 
2000-01-2602
Development of Heat Resistant Long Life Through Hardening Bearing Steel (STJ2)
 
2000-01-2601
Development of a New Life Equation for Ball and Roller Bearings
 
2000-01-2604
Select-a-Seal™, A New Flange Sealing Technology
 
2000-01-2605
“Zero Defects”, Statistically Considered
 
2000-01-1340
A Method to Determine the Two Components of the Crankshaft Load on a Bearing Cap in Firing Engines
 
2000-01-1338
A Study of Microgrooved Bearing Performance by using Numerical Analysis
 
2000-01-1339
Hybrid Ceramic Ball Bearings for Turbochargers
 
2000-01-1341
Measured Crankshaft Bearing Oil Flow and Temperatures with a Full and Partial Groove Main Bearing
 
1999-01-3036
Roller Bearing Design Optimization Applying Hertz Contact Theory
 
1999-01-2790
A Study of the Effect of Friction on Bearing Surface Fatigue Taking into Account the Microplastic Deformation
 
1999-01-2789
Design Target and Life Cycle Cost Management Through Bearing Value Analysis
 
1999-01-2792
Development of Long-Life Needle Roller and Cage Assembly with Special Specification and Shaft with Unique Heat Treatment
 
1999-01-2793
A Bearing Life Prediction Method for Utilizing Progressive Functional Surface Damage Analysis from a Debris Contaminated Lubrication Environment
 
1999-01-2791
Assessing and Predicting the Performance of Bearings in Debris Contaminated Lubrication Environment
 
982030
A Rational Approach for Determining Permissible Speed for Needle Roller Bearings
 
982028
Material and Heat Treatment Effect on the Bearing Inner Ring Fracture under Hoop Stress
 
982029
The Analysis of Frictional Torque for Tapered Roller Bearings Using EHD Theory
 
970214
A Study of Three Layer Copper-Lead Bearings Without Nickel Barrier
 
970217
A Study of the Behaviour of Connecting Rod Bearings Using an EHL Predictive Tool
 
970213
Bearing Loads in a Vehicular Flywheel Battery
 
970216
The Influence of Circumferential Waviness of the Journal on the Lubrication of Dynamically Loaded Journal Bearings
 
845091
New Bearing Designs
 
810801
A Study of Lubricating Oil Performance in a Journal Bearing Rig, II
 
810798
A Test to Relate The Loss of Hydrodynamic Lubrication in an Automotive Journal Bearing to Lubricant Viscosity
 
810758
Applications of Pre-Packaged Wheel Bearing Assemblies
 
810757
Automotive Hub Bearing Units-European Experience
 
810799
Influence of the Effective Viscosity on Bearing Performance
 
810755
Integral Ball Bearing Spindles for Automotive Wheel Applications
 
790744
Axle Efficiency - Test Procedures and Results
 
710829
A New Look at Swash-Plate Drive Mechanisms
 
080015
WHAT CARBON DOES TO AUTOMOBILE STEEL
 
060002
BALL BEARINGS.
 

SAE Foundation PRI SAE Industry Technologies Consortia - An affiliate of SAE International SAE Brasil SAE India A World In Motion