SAE members get discounts
on most products priced under $500.

Join SAE today and start saving!

www.sae.org
SAE International

SAE Papers

Paper Number / Title
For more information, click on the Paper Number
Book Number
2011-01-0072
Development of Liftgate Hinge-to-Roof Sealing Gasket Material for Uncoated Steel Roof Panels
 
2010-01-0729
Automotive Materials Engineering Challenges and Solutions for the Use of Ethanol and Methanol Blended Fuels
PT-146  
2010-01-0726
Cosmetic Corrosion Test for Aluminum Autobody Panels: Final Report
V119-6  
2010-01-0725
Effect of Pre-treatment on Corrosion Performance of AZ31B Magnesium Alloy Panel
 
2010-01-0728
Lab Evaluation and Comparison of Corrosion Performance of Mg Alloys
V119-6  
2010-01-0732
New Liquid Surface Conditioner for Low-Temperature Phosphating System Aimed at CO2 Emission Reduction
V119-6  
2010-01-0731
On the Simulation of the Effects of the “Stone Chipping” on the Car Underbody - An Application of Montecarlo Methods
 
2010-01-0727
Self-deposited E-coating for Mg Alloys
 
2010-01-0724
Simulation of Galvanic Corrosion of Aluminum Materials for Vehicles
V119-6  
2009-01-0895
Analysis of Compromising Degree of an Internal Combustion Engine Using Biodiesel
 
2009-01-0890
Characterization of Zirconium Oxide-Based Pretreatment Coatings Part 1 - Variability in Coating Deposition on Different Metal Substrates
V118-5  
2009-01-0892
Characterization of Zirconium Oxide-Based Pretreatment Coatings Part 2 – Challenges in Coating Aluminum Body Panels
V118-5  
2009-01-0894
Viscosity Controlled High Penetration Wax on Paint Process
V118-5  
2008-01-1158
A Replacement for Phosphate Conversion Coating Based on Hexafluorozirconic Acid
 
2008-01-1153
An Update of New Conversion Coating for the Automotive Industry
 
2008-01-1155
Characterization of Film Formation on Magnesium Alloys due to Corrosion in Engine Coolants
 
2008-01-1154
Corrosion Evaluation of Army and Automotive Materials in the Hawaiian Islands – 3-Year Update
 
2008-01-1156
Development of an Improved Cosmetic Corrosion Test for Finished Aluminum Autobody Panels
 
2007-01-0418
Development of Sealing Material Used in the Body Welding Shop
 
2007-01-0415
Development of Sintered Bearing Material with Higher Corrosion Resistance for Fuel Pumps
 
2007-01-0417
Development of an Improved Cosmetic Corrosion Test for Finished Aluminum Autobody Panels
 
2007-01-0416
New Generation Conversion Coatings for the Automotive Industry
 
2006-01-1649
Corrosion Evaluation of Army and Automotive Materials in Hawaii
 
2006-01-1645
Method Development for Evaluating Microbiological Growth on and Attachment to Aluminum Air Conditioner Evaporator Core Surfaces
 
2006-01-1648
Use of Personal Digital Assistants (PDAs) to Collect Corrosion Inspection Data
 
2006-01-1671
Variation in Corrosion Resistance of Trivalent Chromate Coating Depending on Type of Zinc Plating Bath
 
2005-01-0539
Corrosion Behaviour of Hypereutectic Al-Si-Cu Alloys Used in Cylinder Liners
 
2005-01-0541
Corrosion Product Analysis of Aluminum Closure Panels
 
2005-01-0542
Development of an Improved Cosmetic Corrosion Test for Finished Aluminum Autobody Panels
 
2005-01-0540
Evaluation of the Corrosion Durability of Steel Systems for Automobile Fuel Tanks.
 
2005-01-0543
Gamma Phase Zinc Nickel Electrodeposits from Alkaline Electrolyte
 
2004-01-0062
Method of Heat Reduction for Vehicle Traction Motor Inverter Locked at Standstill on a Climbing Slope
 
2003-01-3666
Composite Stabilizer Bar Link
 
2003-01-3611
Corrotect® Rust Prevention for Rolling Bearings and Precision Parts
 
2003-01-1240
A Comparative Study of Corrosion Test Environments at Three Proving Grounds
 
2003-01-1241
An Obliquely Incident X-Ray Radiography to Measure Greatest Corrosion Depths in Automobile Metallic Plates
 
2003-01-1239
DI Water Uses in Laboratory Corrosion
 
2003-01-1243
Development of New Conversion Coating System
 
2003-01-1235
Development of an Improved Cosmetic Corrosion Test By the Automotive and Aluminum Industries for Finished Aluminum Autobody Panels
 
2003-01-1236
Examination of the Effects of Test Piece Spacing in ASTM B117-97 Neutral Salt Spray and General Motors 9540P
 
2003-01-1242
New Zinc Phosphate Treatment Technologies for Automotive in 21st Century
 
2003-01-1238
Perforation Corrosion Performance of Autobody Steel Sheet in On-Vehicle and Accelerated Tests
 
2003-01-1237
Selective Galvanizing Using Kinetic Spraying
 
2003-01-1244
U. S. Automotive Corrosion Trends: 1998 SAE (ACAP) Automotive Body Corrosion Survey Results
 
2003-01-1234
Update on the Developments of the SAE J2334 Laboratory Cyclic Corrosion Test
 
2002-01-0206
Corrosion Rates of Steel, Zinc and Bi-Metal Couples in the Field and in Laboratory Environments
 
2002-01-0207
New Epoxy-Based Autodepositing Coating System
 
2002-01-0205
Paint Integrity and Corrosion Sensor
PT-105  
2001-01-2751
A Methodology of Using Topology Optimization in Finite Element Stress Analysis To Reduce Weight of a Structure
 
2001-01-2807
A Tool for Predicting Interior Sound Package Treatment in a Truck
 
2001-01-2743
A Two-Dimensional External Aerodynamics Tool (EAT) for Simulating Airflow around Tractor-Trailer Combinations
 
2001-01-2712
An End-user's Guide to Commercial Vehicle Measurements: Interpreting Dynamic and Structural Tests Outside the Lab
 
2001-01-2726
Analysis of Truck-Light Vehicle Crash Data for Truck Aggressivity Reduction
 
2001-01-2781
Auxiliary Axles - An Axle Manufacturers Perspective
 
2001-01-2782
Co-simulation of Driveline Torque Bias Controls
 
2001-01-2791
Custom Configuration of a Vehicle Electrical Control System for Production and Service
 
2001-01-2759
Design for Manufacture of Cab-In-White Parts with Sheet Metal Forming Simulations
 
2001-01-2815
Development of Continuous Dilution Factor for CVS Emissions Sampling and Calculation
 
2001-01-2753
Engineering Office Process Automation with Workflow One Year Later
 
2001-01-2755
Factors Affecting the Friction Coefficients Between Wooden Pallets and the Wooden Floor of a Van -Type Semi-Trailer
 
2001-01-2752
Leveraging Product Configurators in Service Parts and Aftermarket Applications
 
2001-01-2821
Methods for In-Vehicle Measurement of Truck Driver Postures
 
2001-01-2810
Optimum Engine Mounting Layout by Genetic Algorithm
 
2001-01-2760
System Modules, The Impacts on Truck Cab Assembly
 
2001-01-2732
The Effect of Kingpin Inclination Angle and Wheel Offset on Medium-Duty Truck Handling
 
2001-01-2725
Tools for Occupant Protection Analysis
 
2001-01-2808
Visualization of Truck Interior Noise
 
2001-01-3157
Validation Testing of an Environmentally Friendly, Corrosion-Resistant Coating for Brake Rotors
 
2001-01-1182
A Chemical Base for Engine Coolant / Antifreeze with Improved Thermal Stability Properties
 
2001-01-1176
A New Tool for Corrosion Inhibitor Research
 
2001-01-0646
A Vehicle Micro Corrosion Environmental Study of Field and Proving Ground Tests
 
2001-01-0645
Development of Liquid Surface Conditioner
 
2001-01-1179
Elastomer Service Life Prediction in Organic Acid Coolants
 
2001-01-1185
Heat Exchange Characteristics Of Silicate And Carboxylate-Based Coolants In Air-Cooled Engine Parts
 
2001-01-1175
Round Robin Study of Freezing Point of Coolants Using Manual and Automatic Methods
 
2001-01-1181
Standard Test Method for Cavitation and Erosion-Corrosion Characteristics of Aluminum Pumps with Engine Coolants
 
2001-01-3978
Study of Sea Transportation Effects on Corrosion of Cast Iron Cylinder Liners
 
2001-01-1180
The Effects Of Contaminated Engine Coolants On The Service Life Of Elastomers
 
2001-01-1184
The Role of Carboxylate-Based Coolants in Cast Iron Corrosion Protection
 
2000-01-0617
Epoxy Coatings for Automotive Corrosion Protection
 
982373
Collaborative Research Center SFB 362 “Sheet Metal Technology” - Processes for Production and Applications
 
982375
Determination of Forming Limits for Aluminum Alloys
 
982376
Development and Processing of Density Reduced Magnesium Alloys
 
982372
Development of High Strength Hot Rolled Steel to Be Applied for Flanging Deformation
 
982409
Evolution of LD-SRIM: Recent Advances To Meet Market Demands
 
982374
Experimental Determination of Forming Limit Diagram (FLD) of Steel Sheets
 
982417
Injection Molding of Metals and Ceramics
 
982410
Material Consolidation for Automotive Interior and Exterior Parts through Development of a High Performance Material
 
982407
New Microstructural Approaches for Improved Mechanical Properties of Multiphase Steels with Emphasis on TRIP Steels
 
982408
Recent Experience with the Application of TRIP and Other Advanced Multiphase Steels
 
982339
Surface Degradation of Mold-in-Color Polymers for Exterior Applications
 
982312
Vibration Control of Body-Mounted Plastic Mirror Design
 
970729
Applications and Advances in Autodeposition Coatings
 
971002
Automotive Body Component Field Corrosion Behavior in the De-Icing Salt Zone
 
970733
Automotive Corrosion Protection Practices in Europe
 
970736
Characterization of Corrosion Products and Corrosion Mechanisms on Automotive Coated Steels Subjected to Field and Laboratory Exposure Tests
 
971006
Corrosion Performance and Fuel Compatibility of Prepainted Zinc-Nickel Coated Steel for Fuel Tank Applications
 
971008
Corrosion Resistance of Gas Shielded Metal Arc Welds with E-coat
 
970732
Effects of Coating Weight and Pretreatment on the Painted Corrosion Performance of Coated Steel Sheet
 
971003
Evaluation of the Corrosion Rate of Zn Coated Steel Sheets for Automotive Body Use
 
970735
Filiform Corrosion of Aluminum Auto Body Sheet in Accelerated and Outdoor Environments
 
971007
Improved Methods for Testing the Durability of Corrosion Protection in Brake Fluids
 
970731
Influence of Surface Treatments on Durability of Painted Aluminum Alloys
 
971000
Laboratory Perforation Corrosion Tests of Autobody Steel Sheet
 
971001
Perforation Corrosion on Automotive Steel - Comparison of Accelerated Indoor Corrosion Test and Field Performance
 
970730
Reduction of Sludge in a Zinc Phosphating Process - A DOE Study
 
970734
Round-Robin Evaluation of a New Standard Laboratory Test for Cosmetic Corrosion
 
971004
Specifying Zinc Alloy Coatings for Improved Galvanic Corrosion Performance
 
971005
Stabilization Requirements for T409 (UNS S40900) Ferritic Stainless Steel
 
971009
Wire Bonding with Corrosion Resistant Wire for Under-the-Hood Automotive Applications
 
861963
Flow-Controlled Air Dryer Regeneration System
 
860117
Resolving White Spotting Problems (NUBBING) on Electrogalvanised Metal During Metal Pretreatment
 
831818
Mechanism of Cathodic Electrocoat Primer Cratering
 
800800
A Rapid Method to Predict the Effectiveness of Inhibited Engine Coolants in Aluminum Heat Exchangers
 
800799
Prevention of Zinc Sublimation from Alclad Vacuum Brazing Sheet by Calcium Addition to 7072 Cladding
 
790659
Effect of “Sour” Gasoline on Fuel Hose Rubber Materials
 
780662
Conventional Brake Fluids - State of the Art
 
710839
Short-Trip Engine Oil Rust Testing
 
080015
WHAT CARBON DOES TO AUTOMOBILE STEEL
 

SAE Foundation PRI SAE Industry Technologies Consortia - An affiliate of SAE International SAE Brasil SAE India A World In Motion