SAE members get discounts
on most products priced under $500.

Join SAE today and start saving!

www.sae.org
SAE International

SAE Papers

Paper Number / Title
For more information, click on the Paper Number
Book Number
2011-01-0108
25W HID Headlamp - First Series Production in Hybrid Vehicle
SP-2300  
2011-01-0772
An Improvement Research of Under-floor of Midsize Sedan-Focusing on 2010 New YF Sonata Development Examples-
 
2011-01-0114
Automotive Illumination Design with LED Modules
SP-2300  
2011-01-0116
LED Solutions for Mainstream Penetration in Automotive Lighting
SP-2300  
2011-01-0111
Luminance versus Luminous Intensity as a Metric for Discomfort Glare
SP-2300  
2011-01-0117
Method for Detecting the Head Lamp Switch Failure or Wiring Harness Failure and Controlling the Exterior and Interior Lights Using Intelligent Light Sensor
SP-2300  
2011-01-0118
Monte Carlo Based Predictive Models for Total Flux Output of Multi-LED Array Designs
SP-2300  
2011-01-0110
Public Perceptions of Vehicle Headlamps: Visibility and Glare
SP-2300  
2011-01-0109
Thermo-Mechanical Simulations of Rear Lamps with CFD
SP-2300  
2010-01-0296
Development & Calibration of a Rain-Light Sensor and Controller for Indian Market
 
2010-01-0292
Evaluation of Photometric Data Files for Use in Headlamp Light Distribution
 
2010-01-1326
Experimental Study on Water Condensation in Automotive Headlamp
 
2010-01-0295
Headlight with Single LED Module
 
2010-01-0293
Pedestrian Safe and Impact Resistant Headlamp Design Through a Novel Energy Absorber Ring Concept
 
2010-01-0291
Practical Implications of Lighting Standards and Regulations and Their History
 
2010-01-0294
Real-World Measurement of Headlamp Illumination
 
2010-01-0299
Tri-Functional Headlamp System with Low Power Consumption
 
2010-01-0298
Visibility from Vehicle Headlamps and Roadway Lighting in Urban, Suburban and Rural Locations
 
2009-01-0340
Avoiding Visible Condensation Inside Automotive Tail Lamps
 
2009-01-0337
Design and Optimization of a Projector Headlamp
 
2009-01-0057
Energy Efficiency of Car Lighting Systems
 
2009-01-0253
Future Lighting Technology - Improved Safety Features versus Consumer Expectations
 
2009-01-0058
Green Lighting: Analysing the Potential for Reduction of CO2-Emissions in Full LED Headlamps
 
2009-01-0336
Influence of Foreground Illumination from Headlamps on Visibility and Preference
 
2009-01-0061
LED Lamps: Issues in Testing and Standards
 
2009-01-0059
LED Lighting to Reduce Vehicles Power Consumption
 
2009-01-0254
Solid State Infrared Light Sources for Active Safety Applications
 
2009-01-0338
The Bihalogen Projector – Chances and Challenges
 
2009-01-0060
Thermal Consideration of LED Array for Rear Lamp by Simulation and Measurement
 
2009-01-0546
Visual Recovery and Discomfort Following Exposure to Oncoming Headlamps
V118-6  
2008-01-0337
Design Claims and Technical Solution Steps Generating the World First Full LED Headlamp
 
2008-01-0489
Empirically Based Water Condensation and Vapor Clearing Time Calculator for Automotive Lighting Assemblies
 
2008-01-0668
Glare Free Headlamp - First Approach and System Definition
 
2008-01-0488
Influence of Aluminum Coating Thickness on Automotive Lamps
 
2008-01-0339
LED Headlamp Development for Mass Production
 
2008-01-0667
Light Simulations: Controlling Stray-Light in the Headlamp
 
2008-01-0670
Market-Weighted Trends in the Design Attributes of Headlamps in the U.S.
 
2008-01-0487
Performance Parameters for Multi-Filament Halogen Lamps
 
2008-01-0341
Reflectors only Modules for AFS Functions using LEDs
 
2008-01-0342
Resolving Color Breakup of Projection-Type LED Headlamp by using a Hybrid Lens
 
2008-01-0490
Styling and Design - The Real Driving Forces for LED Technology
 
2007-01-1231
2.5 D LED: A Cost Efficient Solution for 3 D Signaling Lamps
 
2007-01-0873
Adaptive Front-Lighting System in LED Technology - Initial Steps and the Future
 
2007-01-0872
Advanced Optical and Thermal Solutions for LED Headlamp
 
2007-01-1041
Application of LED Light Sources with Light Guide Optics.
 
2007-01-1036
Color Perception and Recognition under Automotive Headlight with LED
 
2007-01-1040
Construction and Application of Near Field (TIR Type) Lenses for Automotive Lighting Functions
 
2007-01-0871
Design Parameter Tradeoffs for LED Headlamp Applications
 
2007-01-1391
Development of Crystal Projector Optics
 
2007-01-0604
Dynamic Bending Light: An Innovative Technology for Today and the Future
 
2007-01-1039
Fluid and Thermal Analysis for LED Headlamp with Parametric Studies
 
2007-01-1388
Heat Simulation in Lighting
 
2007-01-0874
High Efficient LED Headlamp Design-Styling versus Light Performance
 
2007-01-0610
Horizontal Adjusting Control for Automotive Headlight System
 
2007-01-0606
Infrared Radiation based Night Vision Systems in Headlamps
 
2007-01-0870
LED HB/LB Module: A Compact Module for Unrivaled Styling, HID Performance and Reduced Package
 
2007-01-0612
Lighting Parameters Analysis on Road by Car Fog Projector in Difficult Weather Conditions
 
2007-01-1390
Micro-Optics: A Novel Approach for Unique Styling
 
2007-01-1389
New Efficient Optic - Improvement of Halogen Low Beam
 
2007-01-0869
New Optical Concepts for Headlamps with LED Arrays
 
2007-01-1232
Next Steps in Environmentally Friendly Xenon HID
 
2007-01-1230
OLED Technology and Its Possible Use in Automotive Applications
 
2007-01-0611
Optical Sensor Concepts for Future Head-Lighting System
 
2007-01-1229
Rear Signal Lighting: From Research to Standards, Now and in the Future
 
2007-01-0603
Resonant Frequency Prediction of Automotive Lamps
 
2007-01-0602
Reverse Engineering Applied to Vehicle Lighting Systems Design
 
2007-01-0601
The Road to Active Light - Headlamp Concepts with Enhanced Adaptive Functionalities
 
2007-01-1037
Towards Development of Thermal Standards for the Design of LED Lamps
 
2006-01-0104
Automotive Forward Lighting with Use of High Flux White Light-Emitting-Diodes
 
2006-01-0286
CPC-Type Reflector Designs for LED DRL and Front Turn Signal Lighting
 
2006-01-0490
Design of Experiment Analysis of Thermal Variables that Affect Automotive Lighting CFD Temperatures
 
2006-01-0488
Dynamic Structural Simulation of the SAE J577 Vibration Test
 
2006-01-0714
Electronic Intelligent Turn Signal System
 
2006-01-0487
Enhanced Challenges by Styling Pressure on Ordinary Position Lamps
 
2006-01-0101
Evaluating Visual Performance of Different CCT White LEDs Under Mesopic Vision
 
2006-01-0287
First “All-LED” Rear Combination Lamp –Challenges and Opportunities
 
2006-01-0716
Front Signal Image of Vehicles – Potential for Safety and Styling
 
2006-01-1667
Infrared Reflective Coatings for Automotive Bulb Shields
 
2006-01-0288
LED Flux Measurement Methods for Automotive Lighting
 
2006-01-0100
LED Front Lighting – Optical Concepts, Styling Opportunities and Consumer Expectations
 
2006-01-0712
Liquid Crystal Automotive Lighting
 
2006-01-0713
Low Power DC and PWM Operation of Halogen Bulbs
 
2006-01-0715
New Headlamp Bulbs for Higher Peripheral Visibility and Reduced Discomfort Glare
 
2006-01-0102
Spectral Effects of LED Forward Lighting: Visibility and Glare
 
2006-01-0489
Strategies for Optimizing Headlamp Illumination and Visibility Along Curves
 
2006-01-0103
The Continuous Emerging of LED in Headlamps: Challenges and Technical Solution for LED Fog Lamps
 
2006-01-0944
The Evaluation of AFS Beam Pattern using the Movement of the Driver’s Eye-Fixation Points
 
2005-01-1925
A Lamp-Lit Image Rendering of Automotive Rear Lamp Using Spectral-Based Ray Tracing Method
 
2005-01-1013
Adaptive Systems for Motor Vehicle Lighting First Steps and Future
 
2005-01-0864
An Approach to Predicting LED Junction Temperatures With Fluid and Thermal Analysis
 
2005-01-1449
Analysis of Moisture and Natural Convection Inside an Automotive Headlamp by Using CFD
 
2005-01-1011
Brightness to the Very Limit - Headlighting Sources With High Luminance - Mercury Free Xenon HID
 
2005-01-1570
Development and Correlation of Three Axes Random Vibration Simulation on Automotive Lighting
 
2005-01-1012
Development of Mercury Free HID Ballast
 
2005-01-0866
Factors in the Perception of Brightness for LED and Incandescent Lamps
 
2005-01-1572
Headlamp Luminous Intensity Matrix Adjustment Factors for Modeling Traffic Sign Performance
 
2005-01-1573
Headlight Glare Exposure and Recovery
 
2005-01-1452
Improved Life for Krypton-Filled Brake Bulbs
 
2005-01-0860
LED Headlamps - Highly Efficient Optical Systems
 
2005-01-0448
Necessity of New Approaches for LED Headlamp Design
 
2005-01-0862
New Applications Using White LED for Frontlighting
 
2005-01-1450
On-Car Evaluation-Methods to Understand Condensation in Headlamps
 
2005-01-0861
Optical Transform Limitations in Headlamp Photometric Performance
 
2005-01-1453
Searching for a Method of Determining Geometric Parameters of a Car Projector at Given Lighting Requirements
 
2005-01-1015
Technology and Styling Trends in Automotive Lighting in North America
 
2005-01-1574
Thermal Effects of Shield Shape on Headlamps
 
2005-01-1448
Understanding Water Vapor Gradients Conducive to Condensation in an Automotive Lamp
 
2005-01-0865
Usage of High Flux White LEDs for DRL and Front Turn Signal Lighting
 
2004-01-2257
Discomfort Glare Ratings of Swiveling HID Headlamps
 
2004-01-2258
Target Detection Distances and Driver Performance with Swiveling HID Headlamps
 
2004-01-0439
AFS Halogen Headlamp System - Experimental Study and First Field Results
 
2004-01-0438
AFS Light Distribution Control
 
2004-01-0226
An Approach for the Optical Design of an LED Fog Lamp
 
2004-01-0436
An Automotive Forward Lighting Optical System using LEDS
 
2004-01-0799
Coating Technology of Automotive Bulbs
 
2004-01-0441
Control Technology for Bending Mode AFS
 
2004-01-0221
Development Implementation of Side Emitting LED's in Exterior Automotive Signal Lighting Applications
 
2004-01-0663
Effect of Moisture Absorption in Plastic on Automotive Lamp Venting
 
2004-01-0222
Effectively Driving LED Arrays with Passive Electric Circuits for Dual Function Automotive Applications
 
2004-01-0665
Evaluating Thermocouple Measurement Techniques for Automotive Lighting
 
2004-01-0440
Fast Track - Static and Dynamic Bending Analysis
 
2004-01-1277
Glare from Headlamps Optimized for Pedestrian Detection
 
2004-01-1283
HID Headlamp Development: Performance Benchmark, Market Penetration and Future Styling Development in World's Markets
 
2004-01-1280
Headlamp Parameters and Glare
 
2004-01-0666
Influence of System Components and Parameters on Headlamp Performance
 
2004-01-0800
Inner Lens UV Vulnerablity Study
 
2004-01-0802
Investigation into the effects of Absorptive and Interference Coatings Applied on Replaceable Headlamp Bulbs
 
2004-01-0437
LED Headlamps
 
2004-01-0224
LED Junction Temperature Measurement and its Applications to Automotive Lamp Design
 
2004-01-0225
Light-Emitting Diodes in Automotive Forward Lighting Applications: Materials Engineering Solutions to Fundamental Challenges
 
2004-01-1281
New Investigation of the Subjective Glare Effect of Projection Type Headlamps
 
2004-01-1282
Pedestrian Protection
 
2004-01-0434
Studies for Headlamp Optical Design Using LEDs
 
2004-01-0801
The Effect of Textures of Aspherical Lenses on the Performance of Projection Systems for Automotive Headlights
 
2004-01-0660
Thermal Impact of Bulb Emissivity and Reflector Finish in Automotive Lighting
 
2004-01-0223
Three-Dimensional Lighting using SMT LED Technology
 
2004-01-0797
Towards Improved Halogen Lighting Performance using a Combination of High Luminous Flux Sources and a Lens Material Approach
 
2003-01-2072
Daytime Running Lamps (DRLs) for Pedestrian Protection
 
2003-01-0554
Cornering Lamps and Static Bend Lighting - Performance Aspects and Technical Comparison in AFS-Systems
PT-119  
2003-01-0647
Development and Correlation of Internal Heat Test Simulation Using CFD
PT-127  
2003-01-0296
Discomfort Glare from Headlamps: Interactions Among Spectrum, Control of Gaze and Background Light Level
 
2003-01-0649
Evaluation of Aesthetic and Reflective Performance of Direct Metallized Resins for Automotive Lighting
 
2003-01-0552
Facts and Feelings Regarding Motorway Light in Adaptive Headlamp Systems
PT-119  
2003-01-0555
Fog Headlamp-Visibility Investigations and Performance Requirements for Redefinition in Adaptive Headlamp Systems
PT-119  
2003-01-0927
Headlamp Rating System
 
2003-01-0556
LED Module for Headlamp
PT-119  
2003-01-0991
Lens Material Development for Improved Halogen Headlamp Visibility
 
2003-01-0558
Mercury Free Xenon HID - A Challenging Development in a Global Context
PT-119  
2003-01-0648
Methodology to Evaluate Automotive Lamp Venting
 
2003-01-0931
Modelling and Calculations of FF Automotive Ellipsoidal Asymmetrical Headlamps with MPXL Discharge Lamps
 
2003-01-0553
Multifunction Projector
 
2003-01-0929
Optical Near Field Measurements and Ray-Tracing Simulations of Coated and Uncoated Halogen Lamps for Glare Analysis
 
2003-01-0988
Predictive Molding Capabilities in Automotive Lighting Products: A Correlated and Repeatable Process
 
2003-01-0559
Spectral Effects of High-Intensity Discharge Automotive Forward Lighting on Visual Performance
PT-119  
2003-01-0989
System Simulation and Prototyping
 
2003-01-0987
The Development of Infrared Projector
 
2003-01-0557
The Development of LED Marker Lamp
 
2003-01-0928
The Development of Visibility Evaluation Method for Automotive Headlamps in Motion
 
2003-01-0646
The Effect of Environmental Conditions on Moisture Clearing Time in Automotive Lamps
 
2003-01-0930
Visual Benefits of Blue Coated Lamps for Automotive Forward Lighting
 
2002-01-2082
Adapting Vehicles for the Disabled Driver
 
2002-01-2062
An Aetiological Analysis of Seat Related Occupational Accidents and Diseases of Professional Drivers
 
2002-01-2080
Driving Workload Comparison Between Older and Younger Drivers Using the Steering Entropy Method
 
2002-01-2059
Seated Human Body Behavior Under Random Vibration
 
2002-01-2060
Sitting and Standing Postural Analysis Through Car Seat Comfort Considerations
 
2002-01-2083
The Application of New Technologies in the Motor Car - Positives and Negatives for the Disabled Driver
 
2002-01-2081
Traffic Maneuvers of Elderly: Their Viewpoint and Perspective
 
2002-01-0978
A Mercury-Free CFL Backlight for Car-Navigation Display
PT-135  
2002-01-0260
A Recommendation for the U.S. Lower-Beam Pattern for Visual/Optically Aimable Headlamp
 
2002-01-0526
Adaptive Lighting Functions History and Future - Performance Investigations and Field Test for User's Acceptance
 
2002-01-0909
Analysis of Lightguides Regarding Uniform Appearance and Coupling Efficiency
 
2002-01-0524
Benefits of Applying Adaptive Headlighting to the Current U.S. and European Low-Beam Patterns
 
2002-01-0382
Characterizing and Qualifying an LED for Automotive Exterior Signal Lamps
PT-83  
2002-01-0525
Control Strategies and Fail-Safe-Concepts for Adaptive Lighting Systems
 
2002-01-0258
Development of Apparatus to Evaluate Visibility in Fog
 
2002-01-0527
Development of Narrow Headlamps by Combining Free Formed Surface System with Projector System
 
2002-01-0979
Distributive Lighting Systems for Interior Applications
 
2002-01-0911
Effects of Sweeping, Color and Luminance Distribution on Response to Automotive Stop Lamps
 
2002-01-0262
High-Beam and Low-Beam Headlighting Patterns in the U.S. and Europe at the Turn of the Millennium
 
2002-01-1039
Instrument Cluster Design Options Using Electroluminescent Lighting
PT-135  
2002-01-0528
Lighting Strategy Proposal for a Lighting Strategy - The Car Makers Point of View
 
2002-01-0980
Night Driving Headlamps in the Virtual World: The Implementation of a Physically Exact Real-Time Simulator for Headlamp Analysis
 
2002-01-0976
On the Removal of Mercury from Automotive HID Lamps: A Technical and Regulatory Perspective
 
2002-01-0381
Performance Considerations for LED Automotive Signal Lamps
PT-83  
2002-01-0380
Power LEDs for Automotive Exterior Lighting
PT-83  
2002-01-0379
Rear Lamp Reaction Time Study-Comparison of Incandescent Bulbs and LEDs
PT-83  
2002-01-0384
Regulatory Issues for Signal and Marker Lamps Using Light Emitting Diodes
PT-83  
2002-01-0913
Scattered Light Predictions for Aluminum Painted Reflectors in Automotive Tail Lamps
 
2002-01-0977
Simulating the Diffuse Interior Lighting Situation and Examining Its Results in a Virtual Reality Environment
 
2002-01-0261
Subjective Color Preferences of Common Road Sign Materials Under Headlamp Bulb Illumination
 
2002-01-0912
Temperature Loads in Headlamps
 
2002-01-0383
Ultra-Thin Automotive Lamps (8-12mm) Using Special SMT LEDs and Special Optics
PT-83  
2002-01-0259
Visual Benefits of High-Intensity Discharge Automotive Forward Lighting
 
2001-01-0857
A Market-Weighted Description of Low-Beam Headlighting Patterns in Europe
 
2001-01-0852
Analyses of Bifunctional Systems
PT-83  
2001-01-0860
Analysis of Natural Convection inside an Automotive Headlamp by Using CFD - Temperature Prediction of the Parts by SHT Method
 
2001-01-0453
Application of Linear Lighting in Motor Vehicles
 
2001-01-0858
Automotive Lighting Thermal Performance Prediction Methods
 
2001-01-0300
Calculation of Nighttime Road Image under Automotive Headlamp Lights
 
2001-01-0447
Considerations in LED Photometry
PT-83  
2001-01-0452
Contour Lighting for Safety and Appearance
 
2001-01-0457
Design of Reflector Optics with Smooth Surface for Automotive Lamps
 
2001-01-0856
Development of Discharge Headlamp Ballast by Applying Hybrid IC Technology
PT-83  
2001-01-0861
Development of a CFD Model for Simulating Headlamp Humidity Clearing
 
2001-01-0862
Development of a Headlamp Mist Resistance Evaluation Method
 
2001-01-0853
Development of a Two-lamp GDHL (Gas Discharge Head Lamp) System
 
2001-01-0458
Double Reflection Concept Applied to Rear Lamps Design
 
2001-01-0303
Evaluation of Adaptive Light Distributions with AFSim
 
2001-01-0301
Evaluation of Automotive Stop Lamps Using Incandescent and Sweeping Neon and LED Light Sources
PT-83  
2001-01-0863
Evaluation of Fabrication Errors on the Performance of Injection Molded Light Pipes (Waveguides)
 
2001-01-0298
Evaluation of High-Intensity Discharge Automotive Forward Lighting
 
2001-01-0855
HID System: Function Integration
 
2001-01-0451
High Efficiency Light Source for Distributive Lighting Systems (DLS)
 
2001-01-0448
LED Drive Modules for Automotive Rear Combination Lamps
PT-83  
2001-01-0302
Measurements and Ratings of HID Headlamp Impact on Traffic Safety Aspects
PT-83  
2001-01-0450
Modular Surface Mount LED Assemblies for Signal Lighting
 
2001-01-0460
REFLEX: TECHNOLOGY TO MEET STYLE Introduction to 4 & 5 mm prisms
 
2001-01-0455
Signal Image Enhancement of Projection Type Headlamps by Additional Optics
 
2001-01-0449
Solid Light Guide Optics for Thin Lamp Applications
 
2001-01-0299
System Strategies and Technology for Improved Safety and Comfort with Adaptive Headlamps
PT-83  
2001-01-0456
TIR Reflectors for Rear Lamps
 
2001-01-0859
Temperature Measurement Errors in Automotive Lighting
 
2001-01-0454
The Development of the “Vertical Shape Line-Beam Headlamp”
 
2001-01-0459
The Low-Beam Design Guidelines for The U.S. Market
 
2001-01-0854
The Smart Headlamp System with Variable Low-Beam Pattern
PT-83  
2000-01-2688
Study of Occupant-Seat Models for Vibration Comfort Analysis of Automotive Seats
 
2000-01-0808
A Hg-Type Cold Cathode Fluorescent Lamp with Rapid Light-Output Response for Instrument Cluster Backlighting
 
2000-01-0341
A Linear, Side-Emitting Light Guide for Use in Automotive Vehicles
 
2000-01-0431
Adaptive Frontlighting Systems for Optimum Illumination of Curved Roads, Highway Lanes and Other Driving Situations
PT-83  
2000-01-0428
Application of Free Formed Surface Reflectors
 
2000-01-0803
Are Measurements for the Cut-Off Gradient of Head Lamps in Different Measurement Distances Possible?
 
2000-01-0342
Automotive Distributed Lighting: Regionally
 
2000-01-0429
Bifunction HID Headlamp Systems - Reflection and Projection Type
 
2000-01-0340
Characterization of Fluorescent Material for Automotive Light Pipe (Waveguide) Design
 
2000-01-0430
Color Aberrations of the Projector Systems and their Corrections by the Shape and Position of the Shields
 
2000-01-0338
Comparison of Disc and Drum Brake Rotor Mode Movement
 
2000-01-0435
Daytime Running Lamps - Different Ways of Realization
 
2000-01-0436
Development of an Efficient Signaling Lamp with LEDs Mounted on a Free Formed Surface
 
2000-01-0807
Diagnostic Technique for Impurities in Low Pressure Neon Lamps
 
2000-01-0434
Front Fog Lamp Performance
 
2000-01-0427
Innovative High Efficient Headlamp System Using Concave or Convex Lenses
 
2000-01-0437
New Applications with High Flux LED in Automotive Signal Lighting
PT-83  
2000-01-0809
Results of an Investigative Study of the Current Decay Test for the Evaluation of Incandescent Lamps
 
2000-01-0433
Simulation of Complex Illumination Systems in the Field of Automotive Lighting
 
2000-01-0343
The Development of a Fiber Optic Illumination System for Cars and Trucks
 
2000-01-0802
Thermal Air Flow Analysis of an Automotive Headlamp - The PIV Measurement and the CFD Simulation by Using a Skeleton Model
 
2000-01-0801
Utilizing CFD for Thermal Analysis of a Prototype HID Fog Lamp
 
2000-01-0805
Xenon with Integrated Starter – The Powerful Way for Improved HID Headlighting
 
1999-01-3201
Designing Automotive Dash Panels with Laminated Metal
 
1999-01-3232
Reliability and Validity of an Automobile Seat Comfort Survey
 
1999-01-0704
A New Light Source Test Concept: Current Decay
 
1999-01-1215
A New Software Tool for Performance Simulation of Headlamp Beam Pattern
 
1999-01-0303
An Expandable Passive Optical Star Network Architecture for Automotive Applications
 
1999-01-0301
Analysis of Waveguide Geometries at Connection Interfaces to Determine Losses
 
1999-01-0697
Applying the Law of Diffusion to Automotive Lamp Venting
 
1999-01-0390
Clinched LED Assemblies for Automotive Signal Lighting
PT-83  
1999-01-0701
Color Appearance of a Scene under Automotive Headlamp Light
PT-83  
1999-01-0388
Design Guidelines for Exterior Signaling Applications of Red and Amber Neon
 
1999-01-0696
Effect of Exterior Airflow on Automotive Lamp Venting
 
1999-01-0304
Fiber Optic Lighting: The Transition From SpecialtyApplications to Mainstream Lighting
 
1999-01-0389
LED Lamp Reliability: Design and Production Process Impact
 
1999-01-0705
Life Prediction for Lighting Bulb Shield Designs Subjected to Random Vibration
 
1999-01-1211
Measurement of Retroreflection from Road Surfaces and Lane Markings
 
1999-01-0703
Performance and Perspectives of Light Sources for Signal Lamps
 
1999-01-0386
Remote HID Headlamp Systems
PT-83  
1999-01-0391
Signal Lamp System - Vertical Linear Technology
 
1999-01-0700
Software Controlled Homogeneity Analysis of Headlamp Light Distribution
 
1999-01-1212
Static Bending Light - A New Light Function for Modern Headlamp Systems
 
1999-01-0302
Stereolithography Apparatus (SLA) Prototyping of Aspheric Surfaces for Automotive Illumination
 
1999-01-0699
Temperature Predictions Using Thermal Data-Base and Design Sensitivity Analysis
 
1999-01-0698
Temperature Predictions for Automotive Headlamps Using a Coupled Specular Radiation and Natural Convection Model
 
1999-01-0383
The Design of a Visual Aim Low Beam Head Lamp with a High Intensity Discharge Source
 
1999-01-0706
The Development and Application of a New Double Filament Capsule for Headlamps
 
1999-01-0387
The Development of a Rectangular Multi-Reflector on a Free Formed Surface for Signaling Lamps
 
1999-01-0384
The Development of the “Line-Beam Headlamp”
 
1999-01-0702
The Rare Gas Fluorescent Lamp
 
1999-01-1214
Vertical Complex Shape: a New Breakthrough in Lighting Technology
 
982851
Enhancing Trailer Safety with LED Lighting
 
982348
A General Discussion on Interior Design Alternatives in Response to FMVSS 201U-Upper Interior Head Impact Protection
 
982346
A Study on Energy-Absorbing Mechanism of Plastic Ribs
 
982412
An Innovative Light Weight Instrument Panel Reinforcement Structure
 
982381
Melt Compression Molding for Interior Trim Parts
 
982349
Theoretical Relationship of HIC d to Crush Space for FMVSS-201 Head Impact Tests, and the Effective Use of FEA in Predicting HIC for Design, Verification and Optimization of Countermeasures
 
982413
Total Interior Systems Integration
 
980317
A Market-Weighted Description of Low-Beam Headlighting Patterns in the U.S.
 
980008
A New Concept of Headlight: Light Guide Headlamp
 
980010
Adaptive Headlamp: A contribution for Design and Development of Motorway Light
 
980007
Adaptive Light Control - A New Light Concept Controlled by Vehicle Dynamics and Navigation
PT-83  
980004
Advanced Lightsource Model for Simulation of Optical Devices
 
980315
Calculation of Temperature Loads in Headlamps
 
980006
Compact Lighting System
 
980009
Design Considerations in Exterior Automotive Courtesy Lighting
 
980002
Design of Reflector Optics for Visually Aimable Lowbeam Head Lamps
 
980322
Development of PWN DRL with Low RF Emissions and Low Heat
 
980318
Development of Visual Measurement System Using Digital Still Camera
 
980316
Environment Leading to Condensation in Automotive Lamps
 
980001
Global Vehicle Lighting System
 
980003
HID System with Adaptive Vertical Aim Control
 
981173
Intelligent Lighting Systems: Their History, Function, & General Direction of Development
 
980324
Luminance Measurement, Contrast Sensitivity, Homogeneity: New Approaches of Defining the Quality of Headlamps
 
980323
Photometric and Optical Methods of Lamp Analysis
 
980320
Study of Tubular Volume Light Source Intensity Distribution
 
980321
Styling Trends for Car Rearlamps
 
980319
The Influence of the Light Distribution of Headlamps on Drivers Fixation Behaviour at Nighttime
 
980005
Xenon Light for Main and Dipped Beam
 
981197
Changes in Angular and Spatial Distribution Introduced into Fiber Optic Headlamp Systems by the Fiber Optic Cables
 
970644
Adaptive Light Pattern - A New Way to Improve Light Quality
 
970256
Attenuation in Light Fiber
 
970257
Commercial Vehicle Applications Using Linear Emitting Fiber Optics
 
970254
Comparison of Dual Focus Collector Schemes for Fiber Systems
 
970911
Comparison of Models for Detection of Highway Obstacles with Headlamps
 
970905
Complex Reflector for Signal Lamp Using Spline Surfaces
 
970901
Complex Shape Headlamps:Eight Years of Experience
 
970908
Daytime Running Lamps with Low Power Consumption
 
970902
Design Strategy for Free-Form Ref lector Head Lamp Using High Intensity Discharge Light Source
 
970650
Development of Active Headlight System
 
970646
Development of New Forward Lighting Systems with Controllable Beams
 
970910
Effects of Large-Radius Convex Rearview Mirrors on Driver Perception
 
970252
Focus-less Optics and their use in Automotive Distributed Lighting Systems
 
970657
Fog Lamps: Frequency of Installation and Nature of Use
 
970909
Halogen Lamp Design Life Improvement for Automotive Applications
 
970904
Headlamp Design Variations Using HID in Projector Type Headlamps
 
970906
Headlighting - Toward a Model of Customer Pleasing Beam Patterns
 
970653
Innovations in Low Pressure Discharge Lighting
 
970645
Intelligent Lighting
 
970652
LED Automotive Rear Combination Lamp (RCL) Dual Level Driver Electronics
 
970907
Light Distribution Editor (LDE) Virtual Light World in HELIOS
 
970648
Modular Headlamp Design for Continuous Improvement of Comfort and Safety of Front Lighting
 
970655
Neon Signal Lighting - An Integrated Approach
 
970912
Predicting the Thermal Performance of an Automotive Fog Lamp Reflector
 
970651
Progress and Perspectives of LED-Technology for Automotive Signal Lighting
PT-83  
970656
Rear Light Redundancy and Optimized Hazard Warning Signal - New Safety Functions for Vehicles
 
970903
Styling and Reflector Design - New Reflector Shapes for Low Beam, High Beam and Foglamps
 
970253
Switchable Holograms for Automotive Applications
 
970647
Variable Headlamp Beam Pattern - Lighting Requirements for Different Driving Situations
 
970913
World Harmonization and Procedures for Lighting and Signaling Products
 
960920
A New Form of the Cut-Off-Zone for Low Beam Headlights
 
960919
Advances in Measurement Technology for Vehicle Lighting Systems
 
960789
Automotive Head Lamp Beam Pattern Uniformity Evaluation
 
960488
CELIS - A Concept for High Quality Car Interior Lighting with Light-Guide Technology
 
960491
Control of Light Output from Plastic Optical Fiber with Optical Elements
 
960922
Development of Optical Space- Vision Instrumentation
 
960925
Development of Smoothly Curved Multiple Surface Reflector
 
960791
Driver Perceptual Adaptation to Nonplanar Rearview Mirrors
 
960493
Durability Testing Methodologies for Optical Fibers in Distributive Lighting Systems
 
960790
Headlamp Light Performance - Criteria for Customer Satisfaction
 
960928
High Performance Fog Lamps: Design Strategies and Proper Usage
 
960489
Low Beam Head Lamp Design Using Distributive Lighting System
 
960921
Neon: A Mercury-Free, Multi-Colored Light Source
 
960927
New Reflection-Type Xenon Headlamps Using HID Technology
 
960792
Rearview Mirrors and Visual Performance: The Role of Afterimages
 
960918
Similarity Calculations and Applications for Low Beam Head Lamp Beam Patterns
 
960926
The Replacement of Parabolic Reflectors by “Free Form” Reflectors
 
960492
Three Specific Design Issues Associated with Automotive Distributed Lighting Systems: Size, Efficiency, and Reliability
 
960923
Trends in the Development of Vehicle Front Lighting
 
960490
Uniform Light Delivery Systems
 
950593
Application of Free Form Reflectors in Modern Headlamp Systems
 
950911
Automotive Backlighting Utilizing Plastic Optical Fiber Devices
 
950602
Automotive Field of View Analysis Using Polar Plots
 
950590
Computer Assisted Headlight Design and Research
 
950596
Corrosion of a High Intensity Discharge Lamp
 
950595
Development of High-Speed Photometric Measurement System
 
950907
Discharge Light Source - The Basis for Fibre Optics Automotive Lighting
 
950904
Distributed Lighting Systems: Uniform Light Delivery
 
950599
Dual-Filament Replaceable Bulb Headlamp Using a Multi-Reflector Optimized with a Neural Network
 
950597
Evaluation of the SAE J1735 Draft Proposal for a Harmonized Low-Beam Headlighting Pattern
 
950592
Headlight Beam Pattern Evaluation Customer to Engineer to Customer - A Continuation
 
950591
High Intensity Discharge Headlamps (HID) - Experience for More Than 3-1/2 Years of Commercial Application of Litronic Headlamps
 
950909
Large Core Plastic Optical Fibers…Bigger is Better
 
950913
Manufacturability and Assembly Issues for Implementing Fiber Optic Distributed Lighting Systems in Automotive Applications
 
950594
New Optical Simulation Systems Revolutionise Headlamp Development
 
950600
On-the-Road Visual Performance with Electrochromic Rearview Mirrors
 
950905
Short Arc HID Lamps for Fiber Optic Lighting
 
950598
Smooth Complex Reflectors - An Alternative Approach
 
950601
The Geometry of Automotive Rearview Mirrors - Why Blind Zones Exist and Strategies to Overcome Them
 
950912
The Use of Woven Fiber Optics in Automotive Interior Lighting
 
940644
Advanced Indication of Braking: A Practical Safety Measure for Improvement of Decision-Reaction Time for Avoidance of Rear-End Collisions
 
940643
Development of L.E.D. Automobile Lamp with High Luminous Efficiency
 
940637
Development of Smoothly Curved Inner Lens
 
940639
Headlight Beam Pattern Evaluation Customer to Engineer to Customer
 
941038
High Beam and Low Beam Filament Identification in Dual Filament Headlamp Sealed Beams and Replaceable Bulbs
 
940636
Improved Projector Headlamps Using HID (Litronic) and Incandescent Bulbs
 
940645
Improving the Field of View and the Frame of Reference in Left and Right Rear View Mirrors for Passenger Motor Vehicles
 
940638
Multi B-Spline Surface Reflector Optimized with Neural Network
 
941047
Optical Requirements for Micro Power-Light Sources
 
940641
Quantifying the Benefits of Variable Reflectance Rearview Mirrors
 
940642
Side Mirror Quality Improvement - Design Philosophy and Computer Aided Engineering Approach
 
940640
The Relative Importance of Horizontal and Vertical Aim of Low-Beam Headlamps
 
941046
Update: Using LEDs for Instrument Cluster Warning Lights
 
930726
Auto-Levelling Projector Headlamp System with Rotatable Light Shield
 
930723
Evaluation of Mechanical Beam-Switching System
 
930722
Harmonised Headlamp Design for Worldwide Application
 
930725
Reaction Times to Body-Color Brake Lamps
 
930721
Rearview Mirror Reflectivity and the Quality of Distance Information Available to Drivers
 
930727
Smoothly Curved Reflector with Diffusion Capability
 
922445
Long Life Halogen Sealed Beam Headlamps for Trucks
 
920816
Computerized Graphics Light Distribution Fuzzy Evaluation System for Automobile Headlighting Using Vehicle Simulation
 
920813
Development of Controlled Surface Reflector for Headlamps
 
920817
Flow Characteristics and Formation of Condensation in Automobile Tail Lamps
 
920812
Optical System for Illuminating the Lateral Section of Wraparound Lamps
 
920815
Simulation of Lighting Appearance of Tail Lamp
 
920814
Visual Aiming of European and U.S. Low-Beam Headlamps
 
910280
Accelerated Plastic Exposure Tests: Are They Effective?
 
910286
Automated Application of Silicone Glass Like Coatings for Polycarbonate Headlamp Lenses
 
910829
Beam Controllable Headlighting System
 
910825
Complex Surface Reflector Technology Foglamp Application
 
910827
Computer Simulation of Light Distributions for Headlamp Systems
 
910823
Definition of the Cut-Off in a Dipped Beam Pattern
 
910828
Development of Smoothly Curved Reflector for Headlamps
 
910824
Development of Very Thin Rear Combination Lamp
 
910821
Reaction Times to High-Contrast Brake Lamps
 
910822
Rearward Vision, Driver Confidence, and Discomfort Glare Using an Electrochromic Rearview Mirror
 
910867
Silicone Adhesives/Sealants in Composite Headlamp Systems
 
910283
Thermomechanical Analysis for the Investigation Solvent Induced and Residual Stresses in an Injection Molded Automotive Headlamp Reflector
 
910284
U. V. Processing of “Solventless” Coatings for Automotive Plastic Lense Material
 
910820
Variable Curvature Headlamp Reflector Parametric Analysis
 
910285
Wet-On-Wet Silicone Hardcoat
 
900570
An Investigation of the Visual Effects of Heated Windscreens in Jaguar Cars
 
900563
Computer-Aided Headlamp Evaluation
 
900564
Computerized Graphics Light Distribution Evaluation System for Automobile Headlighting Using Vehicle Simulation
 
900562
Development of 2-Lamp Type HID Headlighting System
 
900571
Development of High Efficiency Incandescent Bulb-‘u84 (mu-84)'
 
900566
Development of Smoothly Curved Fresnel Lens
 
900569
Motor Vehicle Lighting Systems with High Intensity Discharge Lamps
 
900565
Motorcycle Headlamp Banking Angle Controlling Device
 
900572
The Use of LED Lamps for Turn and Stop Signal Presentations
 
900568
VALEO H.I.D. Developments High and Low Beam Functions
 
891113
Electrically-Controlled Light Transmission Glazing for Automotive Applications Based on NCAP Technology
 
890190
An Evaluation of the Advance Braking Light Device
 
890189
An Improved Braking Indicator
 
890689
Development of LED Rear Combination Lamp with Built-in Proximity Sensor
 
890685
Development of Sub-Miniature Halogen Bulb without Exhaust Tube, Having High Color Rendition
 
890687
High Efficiency Headlamp Systems with Variable Focus
 
890683
International Distributions of Variables Affecting Desirable Vehicle Lighting
 
890690
New Optical System for Low Profile Headlamps
 
890682
Steerable Forward Lighting System
 
890688
The Interaction of Turn, Hazard and Stop Signals-An Examination of the SAE Standards
 
890691
Update: Lighting Devices and Their Installation--Compatibility and Harmonization of international Requirements
 
890684
Visibility Distance with Headlights: A Functional Approach
 
890686
Vision Impairment by Worn Windshields During Night-Time Driving
 
881834
Considerations For Designing Daytime Running Lights in Heavy Duty Trucks
 
841110
Analysis of Hydro-Mechanical Transmission—An Illustration for Training and Research of Automotive Engineering in China
 
841097
On A Clear Day You Can See Friday – A Career Counseling Tool for Managers in the ‘80’s
 
841050
Product Liability—Some Ounces of Prevention
 
841052
The Role of the Engineer in Product Liability Litigation
 
840763
Implementation of CAD/CAM in a Consumer Electronics Company
 
840557
Computer Programs for Engineers; Part I
 
840354
Engineering Applications of High-Resolution Desk Top Computers
 
840357
Engineering Workstations—A New Approach to Engineering
 
790747
SAE Vibration Test for Motor Vehicle Lighting Devices and Components
 
770812
What Color Should Rear Turn Signals Be?
 
080015
WHAT CARBON DOES TO AUTOMOBILE STEEL
 

SAE Foundation PRI SAE Industry Technologies Consortia - An affiliate of SAE International SAE Brasil SAE India A World In Motion