SAE members get discounts
on most products priced under $500.

Join SAE today and start saving!

www.sae.org
SAE International

SAE Papers

Paper Number / Title
For more information, click on the Paper Number
Book Number
2011-01-0538
A Demonstration of Local Heat Treatment for the Preform Annealing Process
V120-5  
2011-01-0767
A Methodology for Evaluating Body Architecture Concepts Using Technical Cost Modeling
 
2011-01-1086
A New High Fluidity Zinc Die Cast Alloy
 
2011-01-1109
A Practical, Simulation Based Approach to the Teaching of Engine Mapping and Calibration Fundamentals
 
2011-01-0429
A Systematic Procedure for Integrating Titanium Alloys as a Lightweight Automotive Material Alternative
 
2011-01-0425
Achieving a Lightweight and Steel-Intensive Body Structure for Alternative Powertrains
 
2011-01-0076
Analysis of Single Lap Adhesive Joints between Magnesium and Other Structural Automotive Materials
V120-5  
2011-01-0536
Application and Performance Characteristics of Aluminum Armor Plate for the Hull Construction of Current and Future Military Tactical Vehicles
 
2011-01-0427
Automotive Mass Reduction with Martensitic Stainless Steel
 
2011-01-1083
Compacted Graphite Iron - A Material Solution for Modern Engine Design
 
2011-01-0078
Cooperation Management: An Essential Enabler for Advanced Technology Development in the US
 
2011-01-1085
Corrosion Performance of “Green” Finishes on Zinc Die Castings
 
2011-01-1110
Deep Orange - A Framework for Research, Education and Collaboration for a Sustainable Automotive Industry
 
2011-01-1262
Designing Composite Suspension Arms for a Formula SAE Vehicle
 
2011-01-0081
Designing and Design Reviewing for Preventing Quality Problems in Automotive Parts
 
2011-01-0537
Development of Cast-Forged Knuckle using High Strength Aluminum Alloy
 
2011-01-0770
Development of an Optimized Structure for Meeting Pedestrian Protection Requirements
 
2011-01-1084
EZAC™ - A Novel High Strength, Creep Resistant, Hot Chamber Zinc Die Casting Alloy
 
2011-01-1091
Effect of Material Microstructure on Scuffing Behavior of Ferrous Alloys
 
2011-01-0535
Effects on Surface Roughness and Friction on Aluminum Sheet under Plain Strain Cyclic Bending and Tension
V120-5  
2011-01-0249
Enhanced Heat Resistance and Durability of Engine Mount Rubber
 
2011-01-0080
Followers and Commitment in the Workplace
 
2011-01-0533
Formability Analysis Predictions for Preform Annealing of Aluminum Sheet
V120-5  
2011-01-1111
From Crippled to Competitive: One School's Transition to a Volunteer Team in the Baja CDS
 
2011-01-1082
Improving the Relationship between Processing and Properties of Zinc Die Casting: Developments in Creep and Ageing Correlations
V120-5  
2011-01-0779
Interpretation of SAE J1100 Cargo Volume Indices
 
2011-01-0428
Lazy Parts Indication Method: Application to Automotive Components
 
2011-01-0424
Lightweight Automotive Seating System
 
2011-01-1107
Making Connections: Methods of Direct Interaction in Distance Learning
 
2011-01-1089
Mechanical Property Behaviour of Rheocast 319 Alloys with and without Iron Additions
 
2011-01-0539
Modeling of Residual Stresses in Quenched Cast Aluminum Components
V120-5  
2011-01-0460
Optimization of Automotive Carpet Fabric for Enhanced Abrasion Resistance for Low Cost Car
 
2011-01-0781
Quantifying Enclosed Space and Cargo Volume
 
2011-01-1088
Recent Developments in Impact, Flexural and Fatigue Data for Zinc Die Casting Anti-Theft Applications
 
2011-01-0074
Self-Pierce Riveting of Magnesium to Aluminum Alloys
V120-5  
2011-01-1090
Steel Produced by the Lost Foam Casting Method
 
2011-01-0075
Structural Evaluation of an Experimental Aluminum/Magnesium Decklid
V120-5  
2011-01-0534
The Effect of Surface Finish on Aluminum Sheet Friction Behavior
V120-5  
2011-01-1108
The Traction Control System of the 2011 Cooper Union FSAE Vehicle
 
2011-01-0426
Weight Reduction Using Massive Carbide Free Thin Walled Ductile Iron Produced via Lost Foam Casting
 
2011-01-0077
Wrought Magnesium Components for Automotive Chassis Applications
 
2011-01-1087
Zinc Die Castings for Automotive Applications
 
2010-01-0310
Advanced Development and Dynamometer Tuning of a Suzuki GSXR 600cc Engine for an FSAE® Vehicle
 
2010-01-0223
An Evaluation of Quality and Performance of Self-Piercing Riveted High Strength Aluminium Alloy AA6008 for Automotive Applications
 
2010-01-0404
Bolt Load Retention and Creep Response of AS41 Alloyed with 0.15 % Ca
V119-5  
2010-01-0312
Development and Qualitative Testing of Traction Concepts as an Undergraduate Experience
 
2010-01-0220
Development of High-Strength Aluminum Piston Material
 
2010-01-0408
Development of Hybrid Magnesium-based Composites
 
2010-01-0409
Effect of Different Magnesium Powertrain Alloys on the High Pressure Die Casting Characteristics of an Automatic Transmission Case
 
2010-01-0218
Effect of Machining Feed on Surface Roughness in Cutting 6061 Aluminum
V119-5  
2010-01-0411
Effect of Nugget Size on Tensile and Fatigue Strength of Spot Welded AZ31 Magnesium Alloy
 
2010-01-0681
Emotions and Follower Behaviors in a Time of Crisis
 
2010-01-0403
Evaluation of a Thixomolded Magnesium Alloy Component for Automotive Application
 
2010-01-0222
Experimental Exploration of the Aluminum Tube Drawing Process for Producing Variable Wall Thickness Components used in Light Structural Applications
 
2010-01-0020
Experimental and FE Analysis of Quasi-Static Bending of Foam-Filled Structures
V119-5  
2010-01-0405
FEA Predictions and Test Results from Magnesium Beams in Bending and Axial Compression
 
2010-01-0654
Ferrous High-Temperature Alloys for Exhaust Component Applications
V119-5  
2010-01-0675
Generational Differences: Retaining Critical Skills
 
2010-01-0226
Impression Creep of Lightweight Alloys
V119-5  
2010-01-0022
Investigation of the Machining of Titanium Components for Lightweight Vehicles
 
2010-01-0313
Laboratory Learning Experiences in Vehicle Engineering
 
2010-01-0679
Lean Engineering Center at Rybnik - Status after 2 Years - Part 1
 
2010-01-0678
Lean Engineering Center at Rybnik: Status After 2 Years - Part 2
 
2010-01-0652
Locally Austempered Ductile Iron (LADI)
V119-5  
2010-01-0410
Mechanical and Thermophysical Properties of Magnesium Alloy Extrusions
 
2010-01-1321
Metal Injection Molding (MIM) Materials and Design
 
2010-01-0412
Microstructure Influence on the Corrosion of Permanent Mould Cast Magnesium Alloy AJ62 in Engine Coolant
 
2010-01-0407
Monotonic and Fatigue Behavior of Magnesium Extrusion Alloy AM30: An International Benchmark Test in the “Magnesium Front End Research and Development Project”
 
2010-01-0655
Novel Method for Casting High Quality Aluminum Turbocharger Impellers
V119-5  
2010-01-0224
Numerical Studies on the Production of Variable Thickness Aluminium Tubes for Transportation Purposes
 
2010-01-0738
Optimal Redistribution Policy for the Buses of Public Transport on Their Garages
 
2010-01-0225
Optimization of Casting Parameters on an Improved AA6061 Aluminum Alloy for Semi-Solid Die Casting
 
2010-01-0657
Preliminary Evaluation of a Low-Cost Cast Iron for Exhaust Manifold and Turbocharger Applications
V119-5  
2010-01-0021
Steel Reinforced Pultruded GFRP Vehicle Chassis Structure
 
2010-01-0229
Tailored Closed Sections for Seat Structures - Effect of Stress Risers
 
2010-01-0311
The Suspension System of the 2009 Cooper Union FSAE Vehicle: A Comprehensive Design Review
V119-6  
2010-01-0406
Uniaxial Deformation, Charpy and Fracture Toughness Testing of Extruded Magnesium Alloy AM30
 
2009-01-0555
Aluminum Rail Buckling: A Confidence Assessment of Different Modeling Techniques. Influence of Various CAE Procedures, Production Variability and Material Characteristics
 
2009-01-0361
Automotive Development Processes and Complete Vehicle Integration: An Intensive Course for Automotive Engineering Graduate Students
V118-6  
2009-01-0363
Automotive Global Collaborative Engineering Course
 
2009-01-0364
Autotronics Education – An Active Learning Approach
 
2009-01-0887
Customer Satisfaction and Competitiveness on the Market
 
2009-01-0554
Development of Aluminum Control Arm Applied for Curved Profile Extrusion Process
 
2009-01-0888
Followers in the Transportation Industry
V118-6  
2009-01-0552
Innovative Alloys for High Pressure Die Casting
 
2009-01-0889
Lean Engineering Center
 
2009-01-0362
Learning While Earning: The Key Role of Supported Distance Learning in Delivering Innovative, Industry Focused Courses to Up-Skill and Develop Employees in the Motor Sports Sector
V118-6  
2009-01-0556
Reducing Porosity in Aluminum Lost Foam Castings Through Computer Simulation
 
2009-01-0553
Weight Reduction from High Strength Aluminum Die-Castings
 
2008-01-1293
A Biodiesel Mini Baja Vehicle and Student Competition
 
2008-01-1291
A Fuel Consumption Simulator for Teaching Efficient Driving Practices
 
2008-01-0551
Analysis Tools for Managing in an Emerging Technological Environment
 
2008-01-1108
Applications of Powder Metallurgy Aluminums for Automotive Valve-Trains
V117-5  
2008-01-1292
Combining Passion with Fundamentals - Applying Model-Based Design to Education
 
2008-01-0549
Followers: The Rest of the Leadership Process
V117-5  
2008-01-0552
How Management Can Focus on Core Functions
 
2008-01-0550
Protocol for Working in Diverse and Distributed Project Teams
V117-5  
2008-01-0852
Single Press to Full Density for Automotive Powertrain Components: Gears and Sprockets
V117-5  
2008-01-1295
The Education of Automotive Engineers to Meet the Global Demands of the 21st Century
 
2007-01-3455
A Characteristics of Particle Number Distribution for the Urea Solution Injection to Urea SCR System of Commercial Diesel Engine for an Emission Regulation
 
2007-01-3447
A Study on the NOx Reduction of Urea-Selective Catalytic Reduction(SCR) System in a Heavy-Duty Diesel Engine
 
2007-01-3682
An Action to Traffic Accident Reduction by AHS
 
2007-01-3557
An Investigation on Knock and Pre-ignition with Tumble Induced Turbulence
 
2007-01-3679
Analysis of Collision Incident using Drive Recorder
 
2007-01-3678
Analysis of Driver Behavior during Yellow Traffic Signals using Drive Recorder
 
2007-01-3453
Analysis of Transient Thermal and Conversion Characteristics of Dual-Monolith Catalytic Converter with Palladium and Palladium/Rhodium Catalysts
 
2007-01-3451
Comparison of NOx Level and BSFC for HPL EGR and LPL EGR System of Heavy-Duty Diesel Engine
 
2007-01-3681
Continuous Simulation of Automobile Running and Crash Using a Finite Element Method
 
2007-01-3524
Development of New Detecting Method of Clamping Force of Bolted Joint
 
2007-01-3442
Experimental Study of Lean NOx Trap Management
 
2007-01-3523
Firmware Update Over The Air (FOTA) for Automotive Industry
 
2007-01-3446
Heat Exchange Efficiency Characteristics of EGR Cooler with Stack-Type or Shell &Tube-Type
 
2007-01-3676
Load Interaction Effects on FCG: Master Curve Approach
 
2007-01-3545
On-Board Diagnostic of Combustion Process in CI Engines with the Use of Dimensional and Non-Dimensional Vibration Signal Parameters
 
2007-01-3456
PM Reduction Performance and Regeneration Characteristics of Catalyzed Metal Foam Filters for a 3L Diesel Passenger Vehicle
 
2007-01-3445
Performance Characteristics of Motor-Driven Cylinder Lubricator Using the Electronically Controlled Quill System with an Accumulating Distributor in a Large Two-Stroke Diesel Engine
 
2007-01-3449
Possibilities of NOx Reduction in the Emissions of Compression Ignition Engines through Ceramic Oxygen Conductors and Thermoelectric Materials
 
2007-01-3450
Public-Private Joint Research to Realization of Advanced Road Services
 
2007-01-3554
Simulation of Scavenging in a Small Two-Stroke Gasoline Engine Typical in South Asia
 
2007-01-3680
Soil Trip Rollover Simulation and Occupant Kinematics in Real World Accident
 
2007-01-3525
Statistical Distribution Model of Complicated Random Variables Based on Maximum Entropy Concept
 
2007-01-3526
Statistical Distribution Model of Field Reliability Based on Phased Weibull Distribution
 
2007-01-3685
Study on the Step by Step Energy Absorption Method Based on the Theory of Reverse Design
 
2007-01-3440
The Influence of Oxygen Dissolved in the Diesel Fuel on the Combustion Process and Concentration of Toxic Compounds in Exhaust Gas
 
2007-01-3444
Theoretical and Experimental Flow Analysis of Exhaust Manifolds for PZEV
 
2007-01-1051
An Evaluation of Formula SAE in the Context of the UK Engineering Education: Culture, Money and Space
 
2006-01-3638
Analysis of Ackermann Steering Geometry
 
2006-01-3609
Engineering the Motorsport Engineer
 
2006-01-3629
HANS® Device - Performance Leader to Market Leader
 
2006-01-3610
Motorsports Industry Knowledge Exchange (MiKE): Oxymoron or Holy Grail (An Imperative for Sustaining Regional, National and Global Competitiveness)
 
2006-01-3608
Rapid Management of Complex Projects for Smaller Companies
 
2006-01-3606
The Formula SAE Tire Test Consortium-Tire Testing and Data Handling
 
2006-01-1046
Project-Based Learning in University Programmes: Getting the Best Out of Formula SAE
 
2005-01-1939
An Analysis of the Government's Role in Supporting Inducement Prizes in the Transportation Sector
 
2005-01-1794
Heuristics for Architecting Automobiles and Automotive Systems: Educating the Next Generation of Automotive Systems Architects
 
2005-01-1796
Integrating Formula SAE with the Engineering Curriculum
 
2005-01-1797
Undergraduate Engineering Education - Identifying the Need for Change
 
2005-01-1795
Using Vehicle Dynamics Simulation as a Teaching Tool in Automotive Engineering Courses
 
2005-01-1798
“The Creation, Development and Implementation of a Lean Systems Course at Oakland University, Rochester, MI”
 
2004-21-0088
Automotive Electronics – What Makes it So Special?
 
2004-21-0089
Comparison of Aftermarket and OEM Development Cycles
 
2004-21-0085
Design Process Changes Enabling Rapid Development
 
2004-21-0090
Mating the Elephant with a Fruit Fly: Synchronizing Development Cycles in Automotive, Electronics, and Software
 
2004-21-0087
Supporting Commercial Telematics and Consumer Products within the Automotive Lifecycle
 
2004-21-0086
The Automotive Challenge: Everything You Always Wanted to Know But Were Too Afraid to Ask!
 
2004-01-1737
A SYSTEMS PERSPECTIVE NEEDED FOR ENGINEERING EDUCATION
PT-145/4  
2002-01-2260
Web-Based Product Development at ArvinMeritor
 
2002-01-1333
Personal and Charitable Planning Under Tax Relief 2001
 
2002-01-1331
What Does It Take To Retire?
 
2002-01-1281
Pad Mount Alternators: Benefits & Advantages and Specification Proposal
 
2001-01-2813
A Numerical Analysis on the Optimum Distribution of an Air-Conditioning Duct with Multiple Outlets in a Medium Bus
 
2001-01-2797
A Ride Comfort Design Sensitivity Analysis of a City Bus
 
2001-01-2740
A Vehicle Electrical System Architecture Based on a Multiplexed Design For Operator Controls and Indicators
PT-128  
2001-01-2778
An Analysis of Shutdown for an Operational Fuel Cell Transit Bus
 
2001-01-2738
Application of an Electronic Instrument Cluster as a Node in a Multiplexed Vehicle Electrical System
PT-128  
2001-01-2729
Approach of Debugging Control Laws of ABS Combined with Hardware-in-the-Loop Simulation and Road Experiment
PT-129  
2001-01-2706
Can a Single Multiplex Data Bus Suffice to Serve all Functions on a Transit Bus?
PT-128  
2001-01-2814
Cooling System Development & Validation For The Urban Bus
 
2001-01-2822
Creating a 3-D Digital Human Model for Truck, Bus and Heavy Machine Design
 
2001-01-2764
Development of a Multi-Body Dynamic Model of a Tractor-Semitrailer for Ride Quality Prediction
 
2001-01-2769
Electronics Integration Test Station Development Methods
 
2001-01-2748
Energy Management Strategy and Parametric Design for Hybrid Electric Transit Bus
 
2001-01-2747
Evaluation of Brake System Performance for Transit Bus Operation and Maintenance
 
2001-01-2790
Implementation of Fault Detection and Diagnostics in an Intelligent Vehicle Electrical System
PT-128  
2001-01-2728
Improved Drum Brake Performance Prediction Considering Coupled Thermal and Mechanical Effects
 
2001-01-2788
Improving PLC Performance With an Integral Filtering Module
 
2001-01-2716
Liquid Fuelled APU Fuel Cell System for Truck Application
 
2001-01-2739
Multiplexed Operator Control Switches in a Modular Package
PT-128  
2001-01-2727
Roll Over Prevention Based on State-of-the-Art ABS Systems
PT-129  
2001-01-2731
Self-Optimizing Brake Control Design for Commercial Vehicles
 
2001-01-2770
System Requirements for the Electronics Integration Test Station
 
2001-01-2771
Test Strategy and Test Case Design for an Automated, ‘To Order’, Configuration System for an Electronic Controller
PT-128  
2001-01-2735
Web-based Engineering for Product Development and Business Support
 
2001-01-3299
Affordable and Sustainable Urban Public Transport
 
2001-01-3255
An Improved Re-adhesion Control Method for High-speed Railways
 
2001-01-3332
An Overview of NEFLEET- The First Full Scale Field Trial of Fuel Cell Powered Busses
 
2001-01-3256
Automation of Railways with Low and Medium Traffic Density
 
2001-01-3258
Design of Network Based On-Board Computer System
 
2001-01-3330
Development Trends in Bus Manufacturing
 
2001-01-3300
Economic Aspects of Transport Development in Bulgaria Under Contemporary Conditions
 
2001-01-3301
FULL SCALE TEST ON A RAILROAD SECTION UNDER REALISTIC STRAIN-TIME-HISTORY
 
2001-01-3254
Light Weight Design for High Speed and MAGLEV Trains
 
2001-01-3257
Train Axle Detector Based on Signal Codification with a Barker code
 
2001-01-3969
Consumption of Drinkable Water in the Industrial Processes: Trinomial - Six Sigma, Citizenship and Environmental
 
2001-01-3970
International Research: A Tool for Sustainable Growth
 
2001-01-3924
Management of the Product Development Process in the Brazilian Autoparts Industry: Current Practices and Main Problems
 
2001-01-3838
Powertrain Process to Translate Customer Perceptions into Technically Driven Database
 
2001-01-3976
Strategy for Lead Logistics Provider (LLP)
 
2001-01-1324
Supply Chain Management – The Dark Side
 
2000-01-3282
Data Management in the Development of a Transportation Vehicle
 
2000-01-1031
Can Training Optimize the Supply Chain Management Process?
 
2000-01-1029
Optimization of Processes for Supplied Parts to Support Rapidly Changing Technologies
 
2000-01-1030
Process and Cost Optimization at Honda of America Mfg., Inc.
 
2000-01-1032
TOP+ - Setting Goals and Achieving Results
 
2000-01-1369
The Impact of Internet Privacy Regulation on the U.S. Mobility Industry: Nuisance or Economic Catalyst?
 
1999-01-3783
On the Relationship between Truck Operating Costs and Pavement Roughness
 
1999-01-2794
3 Things Engineers Need to Know about Patents
 
1999-01-2827
A Single Unit Till-Planting System for Egyptian Soil
 
1999-01-2831
An In-Field Transport System for High-Value Crops
 
1999-01-2826
Cross Country Mobility of a 6WD Off-Road Tractor with Optimal Mass and Geometric Parameters
 
1999-01-2830
Development of a Durability Tester for Pelleted and Cubed Animal Feed
 
1999-01-2797
Development of the Kubota “New Grand L” Series Compact Tractors
 
1999-01-2828
Effect of Tillage Treatments and Off-Road Vehicle's Operating Parameters on Soil Physical Properties
 
1999-01-2796
Licensing Agreement
 
1999-01-2829
Measurement Accuracy of Actual Speed of Wheeled Agricultural Tractors by On-Board Computers
 
1999-01-2832
Robotic System for the Harvesting of Vegetable Fruits
 
1999-01-2833
Transverse Vibration of Tractor Trailer
 
1999-01-0252
Beyond APQP, A Simplified Integrated Project Management System for Automotive Suppliers
 
1999-01-0253
Capturing Innovation Premium
 
1999-01-1296
Decision Analysis in Product Development – A Case Study
 
1999-01-0250
Initiating a Values Based Culture at Track-Type Tractors Division of Caterpillar Inc.
 
1999-01-0251
Tactical Brand Management (TBM): An Engineering Approach to Successfully Executing Marketing Deliverables for Vehicle Programs
 
982775
A Field Evaluation of the S-1 Pedestrian Guard: Transit and Shuttle Bus Applications
 
982774
An Overview of the Federal Transit Administration's Bus Testing Program
 
982777
Development of an Automatic Climate Control(ACC) Algorithm and the Roof Mounted System for Busses
 
982887
Global Trends in Advanced Automotive Systems
 
981494
Global Standards for the Global Marketplace
 
981496
Preparing for ISO/QS 9000 - Help for the Small/Medium Manufacturer
 
981497
Reduction of Water Content in Biodegradable and Other Hydraulic Fluids
 
981495
The Changing Dynamics of Standards
 
980738
A Reliability Engineering Process in a Simultaneous Engineering Environment
 
981015
A Stressed Skin Sandwich Construction for the Automotive Industry
 
980746
Application of Fibre-Reinforced Composites in the Car Side Structure
 
981014
BMW-ROOM An Object-Oriented Method for ASCET
 
981011
Chassis Cross-Member Design Using Shape Optimization - A Case Study
 
981018
Convergence of Laboratory Simulation Test Systems
 
980620
Creating Value through Best Practices
 
981019
Design and Development of 25% Post-Industrial Recycled SMC Hood Assembly for the 1998 Lincoln Continental Program
 
981009
Design for People - Improving the Workplace
 
980662
Engineers for the Next Century: Mobility Industry Verification of ABET's Criteria 2000
 
981066
Experimental Investigation on the Fluctuation Intensities in a Stationary Spray
 
981002
FORMCAST™ - High Pressure Forming Of Complex Geometries
 
980739
Fully Automated Dye-Penetrant Inspection of Automotive Parts
 
981016
How to Generate Load Profiles Out of Road Profiles?
 
980622
Implementing ISO 9000 through Value Engineering
 
980748
Improved Design for Manufacture in Minivan Body Systems
 
980752
In-Mold Cure Monitoring of Phenolic Molding Materials
 
980750
Inserted Tool Design Using Finite Element Analysis
 
980749
Integrated Design for Manufactura-bility in Convertible-Top Vehicle
 
981017
Integrated Vehicle Weight Optimization and Endurance Validation Process Based on Wheel Forces
 
980621
On Determining the Relationship Between Vehicle Value and Interior Noise
 
981008
OneStep™ Liftgate
 
981007
Recent Developments in AA6016 Aluminium Type Body Sheet Product
 
980745
Redesign of an Assembly Line Stop Mechanism for an Automated Palletized Transport System
 
980740
Reliability of Electronic Control Units in Motor Vehicles
 
980744
Technological & Economic Trends in Automotive Related Product Development and Manufacturing
 
980619
Technology Management Challenges in the Automotive Industry
 
981013
Vehicle Structural Design Utilizing Optimized Finite Element Modeling
 
980304
A Voxel-Based Approach to Structural Analysis That Includes Consideration of Contact Conditions
 
981089
Computer Simulation of Vehicle's Performance and Fuel Consumption Under Steady and Dynamic Driving Conditions
 
980308
Dynamic Finite Element Analysis of Window Regulator Linkage System Using LS-DYNA
 
981010
Identification of Dynamic Behavior of Sheet Metals for an Auto-Body with Tension Split Hopkinson Bar
 
973285
The Implications of the European Automotive EMC Directive
 
972701
Product Technology Transfer
 
970810
Changing I/M Performance Objectives
 
962186
Developing and Using Benefit Measurements for Integrated Product Development (IPD)
 
962242
ISO 14000 - An Industry Perspective
 
961843
Global Patent Strategies for the 21st Century
 
961287
Technology Exchange Between Universities and Industries
 
961044
A Business View of the Recycling of Plastics from Durable Goods
 
960001
Fundamentals of Value Benchmarking
 
960005
Value Based Decision Making for the Small Engineering Firm
 
951861
Automotive Recycling in the United States and Japan: Benchmarks and Future Directions
 
951827
LCA - A Fair and Cost Effective Way to Compare Two Products?
 
951836
Life Cycle Analysis of Cars - Experiences and Results
 
951833
Life Cycle Assessment: A Tool for Improvement in Car Design
 
951869
Life Cycle Design of Railways Rolling Stock
 
951829
Life Cycle Energy Analysis for Automobiles
 
951871
Life Cycle Management in the Auto Manufacturing Industry - A Report from President Clinton's Council on Sustainable Development Auto Team
 
951868
Life-Cycle Management - A New Technical Planning Tool: The Fiat Auto Experience
 
951872
MARVEL: A PC-Based Interactive Software Package for Life-Cycle Evaluations of Hybrid/Electric Vehicles
PT-85  
951839
Recycling Network for Scrap Cars - An Economical Tool to Solve an Ecological Problem
 
952149
Compliance with EMC Directive 89/336/EEC: A Strategy for Off Highway Vehicles
 
952147
Mechanical Design Engineering Education Changes to Support Modern Automotive Engineering
 
952146
Research Alliances, A Strategy for Progress
 
942421
Implantation of a Distributed CAPP System (Computer Aided Process Planning) at Cummins Brasil
 
942371
Modelling Techniques and Simulation of the Canadian Jeep Iltis Using Multibody Systems (MBS)
 
941767
The Legal Protection of Technology
 
941768
“How to Talk to Your Patent Lawyer”
 
940550
Competitive Intelligence for the Automotive Industry Using Electronic Sources
 
931891
Dynamic Effects of Non-Steady Flow-Methods for Teaching Process in the Technical University
 
931890
Teaching Evaluation and Off-Time Training - In Search for More Effective Training Programs
 
931889
Workshop Approach to Teaching Automotive Design in the LDC (Lesser Developed Countries)
 
930842
Development of Aisin's CAE Systems for Non-Professional Users
 
930246
Linking Diagnostics with Service Information
 
930836
Organizing the Engineer's Toolbox
 
930243
Service Information Resources
 
930247
Technician Training Resources: An Aftermarket Perspective
 
930844
Technology Management: Maximizing the Merger of Product and Process (The Relationship Between the Career Stages of Engineers and Scientists and Innovation in Research and Development Units)
 
930843
Working Smarter: Improving Engineering Performance
 
922101
That-s A Great Technical Solution! Why Isn't Anyone Using It! (Getting the Organization to Internalize Technological Innovation)
 
920904
Managing Stress: Conquering the Inevitable
 
920901
The Many Faces of Customer Satisfaction
 
920905
When the Workplace Takes Its Toll: Combating Stress
 
920856
Designing and Measuring Training for Performance
 
920836
International Harmonization of Safety Standards in the Automobile Industry: A Policy Perspective
 
920838
International Quality Systems - What is This ISO 9000?
 
920851
Performanced Based Technician Training: A National Program
 
920147
SAE's Cooperative Research Program
 
912476
A 400HP Truck Engine Operating on Natural Gas
 
912609
A Boundary Element Formulation for Acoustic Radiation from Axisymmetric Components with Arbitrary Boundary Conditions
 
912612
A Broadband Network System for Factory Automation
 
912503
A Diagnostic Simulation for Measuring the Combustion Characteristics and the Heat Transfer Coefficient in the Cylinder of Turbocharged Gasoline Engines
 
912515
A Method of Primitive Structural Design by Stick Model
 
912479
A Performance Simulation for Spark Ignition Wankel Rotary Engine
 
912495
A Simulation of Crankshaft Bending Vibration
 
912614
A Structural Optimization for Configuration Design of the Motorcycle Body
 
912522
A Study of Automotive Front-End Design for Assuring Excellent Cooling and Aerodynamic Performance
 
912492
A Study of Inclined Engine Mounting System Design Parameters
 
912541
A Study of Strength Properties of Natural Rubber Vulcanizates
 
912537
A Study on Fatigue Life Distribution of SM45C under Constant Rotating Bending Stress
 
912559
A Study on Performance Improvement of Natural Gas Engine
 
912461
A Study on the Characteristics of Transient Response in a Turbocharged Diesel Engine
 
912507
A Study on the Optimum Design of a Stiffening Plate for the Vibration Reduction of an Engine Block
 
912516
A Study on the Reduction of Exhaust Noise by Using Partition and Offset in a Multi - Chamber Muffler with Perforated Tube
 
912592
A Study on the Rotating Machinery Diagnosis with Acoustic Emission Technique
 
912565
A Study on the Tangential Vibration of the Steering Wheel of Passenger Car
 
912510
A Temperature Controller for Glow Plugs and its Usage in an Engine
 
912571
A Time Domain Method for Identification of Modal Parameters of Automobile by Microcomputer
 
912455
A Visualized Study for the Effect of Swirl Strength on SI Engine Combustion Characteristics
 
912512
AC Rochester In - Tank Electric Rollervane Fuel Pumps
 
912524
Achievement of Theoretical Quantitative Evaluation Method and Effective Countermeasures for Manual Transmission Nibble
 
912577
Acoustic Analysis of a Resonator Muffler Element Using Boundary Element Method
 
912506
Advances in Commercial Vehicle Air Compressor Technology
 
912588
Air Bag Supplemental Restraint Systems: Progress to Date and Future Challenges
 
912499
An Analytical Solution for Spherical Joint Mechanism Including Coulomb Friction
 
912623
An Approach to Continuing Engineering Education in China
 
912517
An Effective Method for Interior Noise Reduction of a Passenger Car
 
912523
An Engineering Practice in Optimal Design of Powertrain Mounting System for 2.0 ℓ FF Engine
 
912533
An Investigation into Co - relation between the Configuration of Steel Sheet Pressing and Certain Material Property Indice Requirement
 
912501
An Optimal Design of the Bellows in the Automobile Exhaust System
 
912482
Analysis of Belt Behavior for an Automotive V - Belt CVT
 
912505
Analysis of Engine Cooling System for a Passenger Vehicle
 
912613
Analysis of NC Tool Path Generation Methods for the Machining of Sculptured Surfaces
 
912531
Application Study of Mechanically Controlled Hydropneumatic Suspension to a Commercial Vehicle
 
912610
Application of CAE Technology to Small - lot Production of Various Major Assemblies - - Paperless Approach to Fast Delivery
 
912487
Application of Electrohydraulic Control Valves to Automatic Transmissions - - An Approach to Improving Shift Quality
 
912582
Application of the Finite Element Method for Improvement of Vehicle Crashworthiness
 
912563
Approximate Inverse Simulation of an Active Steering System Including Steering Wheel Reaction
 
912498
Automatic Brake Locking System
 
912486
Automatic and Powershift Transmissions for Trucks
 
912493
Automotive Components Globalization-Brakes
 
912551
Automotive Cruise Control Using Self-Tuning Regulator
 
912554
Automotive Diesel Fuel Development and Performance Characteristics
 
912615
Braking Sensation Analysis for Scooter
 
912513
Bringing the Designer and Engineer Together-The Technical Stylist
 
912521
Car Fuel Efficiency-Where Next
 
912504
Car Radiator Transient Response: Front - End Air Management
 
912594
Carbon Monoxide Concentration Profiles in the Los Angeles Basin, California
 
912601
Catalytic Converter for Light Duty Cross Country Vehicle
 
912624
Charting Pathways to World - Class Competition: New Visions with Training
 
912545
Chipping Resistance of Zn - Ni Alloy Electroplated Steel Sheet
 
912590
Comparison of Airbag Sensors Using Computer Simulation
 
912579
Comprehensive Three Dimensional Models for Vehicle Dynamic Simulations
 
912587
Compulsory Periodic Vehicle Inspections
 
912520
Computational Study of the Influence of Several Parameters on the Aerodynamic Performance of Automotive Vehicle
 
912481
Computer Aided Expert System for Transmission Design Used Frame and Certainty Factor
 
912527
Computer Simulation of Bus Body Surface Pressure Distribution and Experimental Research
 
912561
Computer Simulation of Vehicle Performance
 
912591
Concept Stage Crashworthiness Analysis
 
912543
Cracking and Decohesion Behavior of Electrogalvanized Coatings
 
912489
Crankshaft Stress Analysis Procedures in the Engine Design
 
912629
Current Development Status of Non-CFC Alternatives for Automotive Air - Conditioning with CFC Regulation
 
912514
Design Sensitivity Analysis of Body Structure Using Skeleton Model
 
912548
Design and Computer Control of a Sliding Mode Fuel - Injection Controller for MPI Gasoline Engines
 
912584
Development and Application of Semi - Analytically Modified Transfer Matrix Method for Structural Dynamic Analysis of Arbitrary Structure
 
912585
Development and Application of a Special Purpose S/W for Vehicle Dynamics
 
912496
Development of Brake Simulator
 
912469
Development of High Performance Engine for Passenger Cars
 
912611
Development of Kia Die Face CAD/CAE System
 
912566
Development of Leaf Spring Kinematical Model and Its Applications in Improvement of Truck Braking and Steering Analysis
 
912542
Development of Non - asbestos Gasket Material
 
912544
Development of Sintered Metallic Cam Follower for Excessively High Load Application
 
912508
Development of a Plastic Casing Air Cleaner for Medium-Duty Vehicles
 
912529
Development of a Vehicle Fuel Economy and Driving Performance Model for Simulation on a Microcomputer
 
912550
Development of an Autonomous On - Road Vehicle
 
912562
Driver Model Using Neural Network System
 
912491
Dynamic Behavior of a Driveline with Universal Joints
 
912555
Effect of ADOIL TAC Additive on Diesel Combustion
 
912602
Effect of WO3 and La2O3 Addition on the Thermal Durability of Pd/γ - Al2O3 Catalysts for Automotive Emission Control
 
912468
Effects of In - Cylinder Swirl on Part Load Performance and Combustion Characteristics in a S.I. Engine
 
912458
Effects of Injection Parameters on Droplet Sizes in a High Pressure, Intermittent Diesel Spray
 
912622
Engineering Education in both Company and Campus Site, its Roles and Results
 
912621
Enhancement of Automotive/Aerospace Transportation Systems Through Optimum Selection/Use of Ground - Support Equipment (GSE)
 
912465
Experimental Investigation on the Control of Radiated Noise from Diesel Oil Pan
 
912573
Experimental Modal Analysis for Bending Vibration of Automobile Power Trains
 
912538
Fabrication of Automotive Components by Applying Cast Iron Chips
 
912519
Fatigue Life Prediction Using S - N Curve Modification
 
912494
Finite Element Model Generator for Assessment and Optimization of Crankshaft Design
 
912480
Global Powertrain Trends
 
912460
Heat Flux between Impinged Diesel Spray and Flat Wall
 
912502
Heat Transfer Studies in an Adiabatic Diesel Engine
 
912534
High - Strength Gears with High Accuracy by Combining New Steel and Ion Nitriding
 
912586
Human Perception Response of Vehicle Excited by Random Road Roughness
 
912553
Ignition Delays for Iso - octane: Measurement Using a Rapid Compression Machine and Prediction Using a Reduced Chemical Kinetic Model
 
912463
Improvement of Performance for Truck Diesel Engine by Multi Valve System
 
912525
Improvement of Seating Comfort
 
912467
Improvement of Toyota 4-valve Standard Engines
 
912483
Improving Fuel Economy by Increasing Gear Steps of Automatic Transmissions
 
912595
Inspection and Study of the Effect of Exhaust Emission on Environment Pollution in Shanghai
 
912619
Intelligent Vehicle - Highway Systems (IVHS) for Newly Industrialized Countries (NICs)
 
912570
Investigation into Turning Behavior of Semi - trailer with Additional Trailer - wheel Steering - - A Control Method for Trailer - wheel Steering to Minimize Trailer Rear - overhang Swing in Short Turns
 
912532
J - Integral and Fracture Time under Thermal Shock Loading
 
912616
Measurement Techniques for Reciprocating Parts of Motorcycle Engine
 
912539
Mechanical Design Considerations for the Use of Polyphenylene Sulffide (PPS) Compounds in Underhood Applications
 
912484
Modular, Electric Shift Transfer Case for Four Wheel Drive Vehicles
 
912598
Multi-Bag Particulate Collector-A Remedy for Chinese Smoky Diesel Buses
 
912473
Multidimensional Simulation of Flow Field and Combustion in a Spark Ignition Engine
 
912558
Natural Gas for Vehicles (NGV)
 
912456
Near Elimination of Idle Combustion Variability
 
912600
New Automotive Catalyst Developments to Meet Future Emission Standards
 
912567
New Multi - link Suspension
 
912575
Numerical Simulation for the Flow around a Car-like Bluff Body
 
912597
Numerical Study on Flow Characteristics around Trucks Passing in Tunnels
 
912574
On the Drag Reduction of Trucks through the Application of Fences and Momentum Injection
 
912549
Onboard Navigation System Operating via GPS
 
912604
Plane - Strain Stretch Forming Using Selective Membrane/Shell Formulation
 
912530
Practical Applications of CAE for Truck Controllability and Stability Analysis
 
912454
Prediction of Cyclically-variable Pressure-time History of a S.I. Engine Using a Quasidimensional Spherical Flame Front Model
 
912581
Prediction of the Crashworthiness of Vehicle Body Aided Computer
 
912605
Production Technology Aiming at High Productivity and Saving Manpower in Producing Plastic Parts
 
912535
Properties and Application of Compacted Vermicular Graphite Cast Iron in Vehicle Component
 
912599
Purification Characteristics of Catalytic Converters for Natural Gas Fueled Automotive Engine
 
912608
Recent Developments of The Boundary Element Method to Noise Control Problems in Automotive Engineering
 
912488
Research on Dynamic 3 - Parameter Shift Schedule of Automatic Transmission
 
912500
Selection and Design of Electrohydraulic Valves for Electronically-Controlled Automotive Suspension Systems
 
912580
Simulation of Tire Dynamics over Small Obstacles Using Virtual Profiles and a Substructuring Method
 
912472
Some Thoughts on Methods to Validate Mathematical Models for I.C. Engines
 
912564
Stability of 4WS Vehicle Based on Side Slip Zeroing Control: Influence of Steering System Dynamics
 
912552
Structure and Operating Algorithm of Voice Voice Recognition System
 
912578
Studless Tires and Their Performance to Secure Safe Driving in Winter
 
912462
Study on Performance Improvement of DI Diesel Engine with Pilot Injection Method
 
912471
Study on the Prediction of Performance and Emission in a 4 - cylinder 4 - stroke Cycle Turbocharged Gasoline Engine
 
912466
Study on the Prediction of Volumetric Efficiency for the 4-Cylinder 4-Cycle Diesel Engine
 
912569
Sweet Area Determination by Performance Sensitivity Analysis for an Automotive Vehicle Suspension
 
912547
System Development for the Design of Gasoline Engine ECU
 
912627
Technology Transfer Strategy in China Auto Industry-Review and Analysis in the Past Decade
 
912560
The Development of a Computer Program for the Analysis of Suspension System Characteristics in the Initial Design
 
912572
The Effect of Engine Mounting on the Shake of Body on Key-Off of a Jeep
 
912477
The Effect of Lean Mixture Combustion and Compression Ratio in Turbocharged Gasoline Engine
 
912470
The Effects of Intake Valve Events on Engine Breathing Capability
 
912464
The Experimental Study of the Performance and Emissions of a Small IDI Diesel Engine
 
912620
The Global Challenge of Intelligent Vehicle/Highway Systems (IVHS) Standards
 
912628
The Great Divorce - Ownership and Management
 
912536
The Influence of Grain Size and Inter - Particle Spacing on the Fatigue Crack Propagation in SM45C Steel
 
912617
The Method for Evaluation of Irregular Combustion in a 2-stroke Cycle Gasoline Engine
 
912607
The New Superplastic Forming Technology of Injection Plastics Molding Cavity
 
912509
The Oxidation Effect on the Exhaust Valve Seat Wear
 
912511
The Performance of the Rotary Type Carburetor
 
912453
The Progress of Automotive Powerplants in Korea
 
912576
The Relationship between Vehicle Suspension and Steering System Design and Steering Behaviour
 
912478
The STM4 - 120RH and STM4 - 120DH Stirling Engines Performance Comparison
 
912603
The Single Stroke Cold Forming Technique in One Station
 
912526
The World Truck - Myth or Reality?
 
912497
Theoretical and Experimental Study on Drum Brake Squeal
 
912583
Traction Control System for Improved Driving Safety
 
912626
Trade Relations and Transfer of Technology of the Indonesian Automotive Industry
 
912625
Transfer of Technology to PROTON in Malaysia
 
912518
Transient Vibration Analysis During the Door Closing by Using the Laser Holography Method
 
912528
Truck Fuel Saving Aerodynamic Devices - Investigation of Cabin Loads
 
912474
Two-Stroke Engine Technology for Passenger Automobiles
 
912557
Unburned Methanol and Formaldehyde Emission Measurements from Methanol - Flexible Fuel Vehicle (FFV)
 
912596
Urban Transport and the Environment in the Asia-Pacific Region
 
912618
Ushering New Era of China's Road Transport by Constructing Trunk Road Backbone System and Major Transport Terminals
 
912490
Vehicle Drive Line Dynamic Behaviour Simulation
 
912593
Vehicle Safety and Emission Requirements in Australia
 
912568
Vehicle Suspension Model Validation and Dynamic Simulation
 
912457
Visual Study of Diffusion Process of Impinging Spray in Stratified Charge Engine Using Liquid-Liquid Injection Technique
 
910395
Automotive Training: “A New Process of Learning” - A Nationwide Thrust
 
910904
Bill Stout Engineer/Imagineer (1880-1956)
 
910894
Considerations in the Use of the NHTSA Cardfile
 
910396
Determining Value of Technical Training by Statistical Analysis
 
910905
Global Economy and Competition: Engineering Challenges of the 90's
 
910397
Making Performance Pay Through Training
 
910026
Recycling a Necessity in the Design of Automobiles
 
901613
Customer Service: A Strategy for the Future
 
905001
Cycle-resolved Flame Structure Analysis of Turbulent Premixed Engine Flames
 
900914
Developing a Dynamic Motivational Environment
 
900884
Industrial Outsourcing of R&D: Expectations and Actualizations
 
900850
Data Acquisition and Analysis: Rethinking and Stripchart
 
900430
European Automotive Coolant Technology
 
900845
European Harmonization of Technical Standards- Implications for the U. S. Automobile Sector
 
900767
How to Change a Company's Culture
 
900429
Internationalisation of the Automotive Industry - Global Responses in the Functional Fluid Area
 
900809
Reeducation and Retraining of Instructors from Developing Countries in Japan-The Role of the Institute of Vocational Training at the University of Industrial Technology
 
900431
The Status of U. S. Coolant Standards
 
892456
Future Highway Design Considerations Due to Automated Vehicles
 
892008
Profiles of Automobiles in the Year 2000
 
891687
A History of Atmospheric Diving Suits and the Development of a Highly Mobile Rotary Joint
 
891703
Advanced Highway/Vehicle Programs - A Texas View
 
891688
DOLPHIN: A High Speed Semi-Submersible with Mine Countermeasure and Surveying Capabilities
 
891722
Demand Management in Europe through RTI
 
891705
Developing a Research Program in Intelligent Vehicle-Highway Systems
 
891706
Inductive Power Transfer to Highway Vehicles
 
891708
Longitudinal Control Concepts for Automated Automobiles and Trucks Operating on a Cooperative Highway
 
891725
Research Needs in Roadway Automation Technology
 
891723
Super Smart Signs
 
891721
Vehicle/Highway Automation: Policy Issues and Strategies in California
 
891400
IDENTIFYING CUSTOMER WANTS THROUGH QUANTITATIVE RESEARCH
 
891402
SERVICEABILITY A KEY FACTOR IN DESIGN
 
890652
Case Study: Quality Function Deployment
 
890162
Continuous Improvement and Simultaneous Engineering
 
890166
Design of Experiments and Simultaneous Engineering
 
890874
Experimental Study on the Actual Uses of the Cars (E.U.R.E.V.)
 
890165
Mechanisms for Simultaneous Engineering Coordination
 
890167
Product Development Methodology for a Competitive World Market
 
890163
Quality Function Deployment: A Tool or a Philosophy
 
890868
Technology Planning–A Process for Tying Technology Development to Business Objectives
 
881758
BiblioTech at Ford Motor Company: a Worldwide Information Network
 
881760
Industrial Technology Institute's Information Transfer Service to Automotive Suppliers
 
881759
Information Outreach Through Networking at the Chrysler Information Resources Center
 
881757
Information Transfer within General Motors: Use of the Library Online Catalog
 
881761
The Role of the Society of Manufacturing Engineers in an Information Network
 
885153
A Computer-Based Automotive Information System: Ford Motor Company's Technical Information Utility
 
885049
Cars In The '90s As A Humanware
 
885070
Changes In Work Organization And New Technology - Impacts On Organizations, Workers, And Costs
 
885001
Education And Training On Automotive Technologies in The Turin Technical University
 
885005
Effective Technical Training Of Product Engineers For The 1990's
 
885160
Harmonization Of Standards in The Six Arab States Of The Gulf Cooperation Council
 
885155
Information Systems At Bicardo Consulting Engineers
 
885158
International Harmonization Of Motor Vehicle Regulations
 
885171
International Mechanisms For Achieving Optimal Harmonization Of Standards And Regulations: An Overview Of Their Effectiveness
 
885154
New System Of Automotive Engineering For The 21st Century
 
885069
Personnel Evaluation And Education System
 
881300
Problems in Internationalization of SAE Standards
 
885156
SAE Electronic Information - Databases, Software And Future Information Technologies
 
885163
Technical And Economic Consequences Of The Restructuring Undergone Recently By The European Component Industry And Of The Development in Europe Of A New Type Of Relationship Between Suppliers And manufacturers (“Partnership System”)
 
885176
The Automotive Industry In Transition
 
885159
The EEC Motor Vehicle Type Approval - Success Or Failure?
 
885004
The Education Of Engineers In Technical Management
 
885174
The Future Of The Automotive Engine
 
885175
The Future Of The European Road Transport System
 
885173
The Outlook For Developing International Harmonization Of Regulations And Standards
 
881249
You're Not Out There Alone: High-Tech and Other Aids for Your Career Planning and Management
 
881211
Freeway Automation Policy Issues
 
871158
Australian Initiatives in Traffic Management and Energy--Vehicle Parameters and Interactions
 
871155
Future Automotive Technical Trends
 
871162
International Harmonization of Motor Vehicle Standards
 
871163
Regional Automotive Industrial Complementation An Impossible Utopia for South-East Asia
 
880393
Assessing Technician Training in the 90's
 
880471
Engineering Design Education-More Than a Capstone
 
880735
Imagination and Innovation Keynote Address 1988 SAE International Congress & Exposition February 29, 1988
 
880734
Sponsored Instruction Enables Real-World Design Experience
 
880330
The People Focus In Processing
 
871244
Coping with New Technology - An Automobile Club View
 
871241
Creativity - A Course for Action
 
871242
Engineering Training, Education and Retraining, Reeducation of Instructors in Japan - The Role of The Institute of Vocational Training
 
871214
Power Plants for the Nineties and Beyond
 
871128
Presidential Address of the Iato (SAE Indonesia)--The Future Role of Component Industry
 
871127
Presidential Address of the Society of Automotive Engineers of China
 
871129
Presidential Address of the Society of Automotive Engineers of Japan--The Activities of the Society of Automotive Engineers and the Automobile Situation in Japan
 
871130
Presidential Address of the Society of Automotive Engineers of Korea--State of the Automotive Engineering Profession in Korea
 
871131
Presidential Address of the Society of Automotive Engineers of North America Trends Affecting SAE and Automotive Engineering
 
871243
Technical Service Training in the “Hi-Tech” Era
 
871245
Technology and the Engineer - The Educational Challenge
 
871161
The Australian Automotive Industry: Restructuring Now to Meet the Challenge of the 1990s
 
872021
Consulting Engineering Overseas
 
872015
Simulation Modelling of Agricultural Tractor Performance and Mobility
 
872019
What is Wrong with Continuing Education?
 
871956
Application of Reliability Technology in Vehicles Development
 
871930
Electronic Information Access-A Library off Information Available at the Terminal
 
871935
Government-Industry Technology Transfer
 
871932
SAE Databases & Software: Past, Present & Future
 
871929
SAE Global Mobility Database as an In-house Engineering Resource
 
871927
The Corporate Technical Information System: The Ford Inhouse information Utility
 
871695
An Expert System for Forecasting Combine Sales in U.S.A.
 
871679
Bridging the Gap: Meeting the Financing Needs of Today's New Companies
 
871675
Engineering Involvement with Off-Shore Procurement
 
871648
Stress Affects Everyone
 
871531
Describing the Truck Driver Eye and Head Accommodation Tools
 
871535
High Tech Development in Transportation-Two Cheers for the Market System
 
871534
Perceiving Needs
 
871537
Research and Development of New Technologies and Their Applications to Automobiles
 
871551
The Process Control System
 
870893
Digitisation by Photogrammetry for CADCAM
 
870891
Electronic Data Transfer - How Can it Become Business as Usual
 
870827
Ask the Right Questions
 
870792
Reliability Goal Apportionment A Method for Allocating Engineering Resources
 
870561
An Aytomotive Engineer's Guide to the Effective Use of Scalar, Vector, and Parallel Computers
 
870562
An Intelligent Framework for Engineering Decision-Making
 
870565
Automotive Crashworthiness Performance on a Supercomputer
 
870566
Finite Element Performance on High Performance Computing Systems
 
870563
Fluid Mechanics, Finite Elements, and Supercomputers
 
870112
A Combined Simulation-Artificial Intelligence Approach for Manufacturing System Design
 
870118
A Knowledge Based Approach to Fault Trees
 
870115
An Expert System for Arc Welding
 
870111
Automated Planning and Resource Management in an Autonomous Underwater Vehicle
 
870113
Elements of Variable Precision Logic Based on Art
 
870117
Integrating Design and Manufacturing By Combining Artificial Intelligence and Database Approach
 
870110
Knowledge Representation for Expert Systems: A Survey and Evaluation of Techniques
 
870532
Managing for Reliability
 
870531
The R&D Engineer and Product Quality
 
870639
Women in Engineering: The Realities of 1987
 
862047
Engineering Education and the Engineering Research Centers: Towards an Active Industry Role
 
861466
Essential Partnership: Government, Universities and Industry
 
861465
Government Research and Small Business
 
861467
Industry Sponsored Research and Development at the Undergraduate Level
 
861468
Industry Sponsored Research on the Graduate Level
 
861473
Low Cost Multi-function Engineering Workstations in the Technical Office
 
861221
Statistical Process Control is a Management Style
 
861219
What SPC Can Do for You
 
861090
Innovation in Europe - A Way of Life: 1986 SAE/I Mech E EXCHANGE LECTURE
 
860777
The Human Equation In Engineering … or Things You Never Learned in Engineering College
 
860337
A Second Generation Expert System for Diagnosis and Repair of Mechanical and Electrical Devices
 
860519
Accessing Japan's High Tech Progress: Guidelines for Auto Industry Pathfinders
 
860336
Embedding Artificial Intelligence in Existing Applications
 
860338
Expert System for Tool Selection
 
860334
Expert Systems: Misconceptions and Reality
 
860521
Foreign Industrial Targeting: Will It Continue to Emasculate Our Industries?
 
860339
Implementing an Expert System for Process Planning
 
860335
Knowledge Representation in Mechanical Design Systems: Issues and Examples
 
860333
Promises and Pitfalls of Knowledge Systems: An Overview
 
860340
Some of the issues in the Implementation of Artificial Intelligence in Engineering Design
 
860127
Technology Transfer: making It Really Happen
 
860640
Japanese Technical Information and Its Lingual Media
 
852254
Continuing Education for ChinaS Automotive Industry
 
852256
Creativity--Catalyst for Education
 
852299
Economic Growth Versus Automotive Transport
 
852297
International Cooperation of Automotive Technology
 
852245
Practice of Mission-Oriented Engineering Education--Viva, the Engineering Spirit!
 
852255
Skills in Engineering Drawings of the Engineers and Technicians in Indonesia
 
852175
The Continuing Development of Mobility Technology
 
852246
The Development and Delivery of Post Trade Training and Retraining for the Automotive Industry--Tafe Victoria Initiatives
 
852192
The Technical Import of the Chinese Automotive Industry in Recent Years
 
852298
The Tide of New Technolgoy and the Automobile
 
851121
Achieving Quality Control Throughout the Factory
 
851097
Creative Inventors-Their History, Education & Importance
 
851570
Basic Project Management-A Guide for SAE Student Branches
 
851578
Challenge and Opportunity For The Manager of The 80's
 
851580
Educational Asset Protection and Career Development
 
850750
Computer Integrated Manufacturing and Its Impact on Engineering and the Profession
 
851466
Creativity-Tool for Tomorrow An Essay
 
850810
Electrical Engineering Education-A Study in Dynamics
 
850809
Trends in Engineering Education
 
850776
You Can Do Something About Your Personal Productivity
 
850340
Benefiting from Japan's Technical Progress-R & D Strategy in the Eighties
 
850339
Consumer Motivation Versus Market Segmentation
 
850338
The Impact of Off-Shore Sourcing on U.S. Aftermarket Suppliers
 
841022
Accelerated Weathering Test Development With Fluorescent UV-Condensation Devices
 
841023
Selection of the Optimized Aftercooling System for Cummins Premium Diesel Engines
 
841020
Testing of Aftermarket Products
 
840764
16-Channel Portable Data Acquisition and Reduction System
 
840765
Mobile Data Acquisition and Analysis Laboratory
 
840502
A Microprocessor Controlled Recorder for Fatigue Load Measurements on Board of Long-Term-Test Vehicles
 
840501
Automotive Component Vibration: A Practical Approach to Accelerated Vibration Durability Testing
 
840503
Exhaust System Accelerated Durability Testing
 
831351
A Corporate Product Quality Assurance Program
 
831397
Accepting CAD/CAM as a Way of Doing Business
 
831395
Engineering Considerations on Litigation Avoidance
 
831277
From Engineer to Manager
 
831394
How to Avoid (or Win) Products Litigation
 
831278
Leadership: Action Not Position
 
831279
The Role of Higher Education in Technical Management
 
830339
Applying Robot Technology to the Foundry Industry
 
830494
Automobile Demand and the Policy Forecast
 
830340
Establishment of Automatic Welding Lines in the Automotive Industry
 
830386
Government Requirements and Voluntary Standards - International Considerations
 
830138
Injection Molding Quality Control – Practical and Meaningful Tests
 
830800
New Technology and the Engineer
 
830650
Policies on Productivity – Some Lessons from Agriculture?
 
830141
Practical Applications of Statistical Quality Control in SMC Molding Plant
 
830669
Review of the Uniform Product Liability Act
 
830341
Robot to Solve Rubik’s Cube ®
 
830299
Simple Statistical Methods
 
830406
Statistical Aids for Engineers
 
830140
Statistical Applications in Automotive Urethane Molding
 
830300
Statistical Control of Suspension Bushing Assembly
 
830404
Tire Uniformity Improvement with the Use of a Bar Code Identification System
 
820520
Managing with Statistical Methods
 
820660
A Pattern for Engineers in the ‘80’s
 
820060
Computer-Aided Engineering Education
 
820645
Contractors and Manufacturers - Partners in Computerized Equipment Management
 
820445
Internationalization of the Auto Industry and Its Employment Impacts
 
820808
Productivity — The Overall Goal
 
820979
Reliability Estimation and Failure Prediction of Highway Tractor Components
 
820444
Structural Changes in the World Auto Companies: The Emerging Japanese Role
 
820080
Synthesizing Experience through the Use of Computer Aided Engineering
 
820980
Teaching the Deming Statistical Quality Control Method
 
820059
Video Based Manufacturing Engineering Programs
 
820289
Weathering of Adhesive Bonded Aluminum Automotive Alloys - Five Year Report
 
820056
Women in Engineering: A Non-Traditional Resource
 
790719
The Relationship Between Product Planning and Product Design
 
770878
The Engineer's Manifesto
 

SAE Foundation PRI SAE Industry Technologies Consortia - An affiliate of SAE International SAE Brasil SAE India A World In Motion