SAE members get discounts
on most products priced under $500.

Join SAE today and start saving!

www.sae.org
SAE International

SAE Papers

Paper Number / Title
For more information, click on the Paper Number
Book Number
2004-01-1039
A New Coating for Multi Layer Steel Exhaust Gaskets
 
2004-01-1033
Advantages of a New Hard Carbon for Water Pump Seals for Automotive Engines
 
2004-01-1035
Deformation and Reaction Force of a Rubber Gasket due to Buckling
 
2004-01-1040
Determining Reasons for Head Gasket Failures in Air Cooled Engines with a Simple Testing Methodology
 
2004-01-1034
Developing a Method for Evaluating High-pressure Gas Permeability-Leakage
 
2004-01-1037
Development of FIPG for Magnesium Alloys
 
2004-01-0011
Finite Element Analysis of Modules made of Thermoplastic Materials and Elastomeric Gaskets for Powertrain Applications
 
2004-01-1031
Material and Dimensional Considerations During the Hydraulic Seal Selection Process
 
2004-01-1038
New Cured-In-Place Gasket Technology Using UV-Cured High Performance Elastomers
 
2004-01-1041
Rubber-Edged Composites: A Unique Approach to Reducing the Effects of Compression Stress Relaxation on Static Rubber Seals
 
2004-01-0001
The Determination of a Tough Silicone Adhesive that can be Rapidly Cured and Adhered to Multiple Substrates
 
2003-01-0485
A New Concept of Static Rubber Gasket for Sealing Rough Surface
 
2003-01-0477
Advances Toward Life Estimation in Static Sealing
 
2003-01-0483
CAE Approach for Multi-Layer-Steel Cylinder Head Gaskets - Part 2
 
2003-01-0476
Dynamic Analysis of Elastomeric Components using the Finite Element Method
 
2003-01-0482
Evaluation on Properties of Perfluoro Rubber at High Temperature
 
2003-01-0474
MLS Cylinder Head Gasket Wave Stopper
 
2003-01-0484
MLS Influence on Engine Structure and Sealing Function
 
2003-01-0481
Proteus® - MLS Cylinder Head Gasket Analysis Tool
 
2003-01-0480
Sealing the High Performance Diesel Engine with Victocor 500
 
2003-01-0479
The 1D CAE Program for Cylinder Head Gasket Design
 
2003-01-0473
Thermal Examination of a MLS Gasket with Integrated Sensor Technology for an Effective Heat Management
 
2003-01-0472
Visualization of the Contact Condition and Lubricant Flow Between a Seal Ring and a Shaft for Automatic Transmissions
 
2002-01-1369
Experimental and Analytical Methods for Assessing Bearing Performance Under Debris Contaminated Lubrication Conditions
 
2002-01-1372
Metrics and Conversions for Process Quality
 
2002-01-1370
Off-Highway Truck Wheel Bearing Performance Testing
 
2002-01-1371
The Effect of Microstructure on Debris Dented Rolling Element Bearing Performance
 
2002-01-0663
3D Engine Analysis and MLS Cylinder Head Gaskets Design
 
2002-01-0661
Development of the Methodology for 3-D Characterization of Oil Seal Shaft Surfaces
 
2002-01-0664
Fatigue Analysis for Isolated Rocker Cover Capscrews
 
2002-01-0660
Functional Improvement on Valve Stem Seal
 
2002-01-0666
Leakage Characteristics in a Channel Consisting of a Serrated Wall
 
2002-01-0662
Micro Surface Roughness of O-rings and Sealing Mechanism
 
2002-01-0665
New Stopper Technologies for MLS Gaskets
 
2001-01-0684
CAE Approach for Thermal-Acoustical Protective Shields
 
2001-01-0688
Development of Bonded Piston Seals
 
2001-01-1323
New Gasket Test Method and Device
 
2001-01-0687
Sealing Rougher Surface Finishes Using Conformable Rubber Coating on MLS
 
2001-01-0686
The Selection of Elastomer Compounds through Correlation of Rubber Properties to Seal Life
 
2001-01-0685
Wear and Leakage in Seal Ring Design
 
2000-01-0421
Adhesives for Bonding Plastics
 
2000-01-0418
Advanced Material Technologies — A Key Factor for Ultimate Driving Performance
 
2000-01-0684
An Improvement of the Sealing Performance in Stamped Steel Bolted Flanged Joints by Using Liquid Sealant Under Internal Pressure
 
2000-01-0685
Applying Gasket Materials to High-Stress, Dynamic Flange Environments
 
2000-01-0682
Carbonization Phenomena on Dynamic Shaft Seals and Test Methods
 
2000-01-0752
Compression Stress Relaxation Test Comparisons and Development
 
2000-01-1391
Designing an Interior AppliedWaterborne Coating for Use in Automotive Paint Shops to Replace Sound Deadening Pads
 
2000-01-0681
Development of Seal for Power Steering
 
2000-01-0419
Experimental Sensitivity Studies on Glass Bonding Urethanes
 
2000-01-1387
New Low MDI Polyurethane Foam System Replaces Heat Reactive Baffles in NVH Applications
 
2000-01-0686
Platen Parallelism Effects in Gasket Sealability Testing
 
2000-01-0422
Properties and Applications of an Anaerobic Sealant for High Joint Movement
 
2000-01-0423
Requirements for Improved Performance of Specialty Sealing and Bonding Materials for Automotive Applications
 
2000-01-0426
Stress Analysis and Strength Evaluation of Bonded Shrink Fitted Joints Subjected to Torsional Loads
 
2000-01-0680
Study of Rubber Flow Behavior Inside Mold
 
2000-01-0683
The Influence of the Valve Stem Seal Oil Metering Rate on Exhaust Emissions
 
2000-01-0425
Use of Waterborne, “Bakeable” Technology for Sealing Interior Seams in the Paint Shop-A Halogen Free Approach
 
1999-01-0878
A Study of the Sealing Mechanism of Radial Lip Seal with Helical Ribs – Measurement of the Lubricant Fluid Behavior Under Sealing Contact
 
1999-01-0597
Advances in Static and Dynamic Exhaust System Sealing
 
1999-01-0880
Design Analysis of Typical Injection Transfer Moulding Faults
 
1999-01-0593
Design Guidelines and Concepts for Zero-Gap Bedplate Sealing
 
1999-01-0883
Design and Life Performance of Valve Stem Seals
 
1999-01-0881
Experimental Study of Properties of Material for Reciprocating Valve Stem Seals
 
1999-01-0885
Further Finite Element Analysis of Reciprocating Valve Stem Seals
 
1999-01-0598
Gasketed Bolted Joint Design Analysis Using a Spreadsheet-Finite Element Approach
 
1999-01-0884
Metered Leakage Prediction for Reciprocating Valve Stem Seals
 
1999-01-0594
Recent Advancements in Gaskets for Automatic Transmissions
 
1999-01-0879
The Escape Load of the Rubber Seal in the Spark Plug Casing at High Temperatures
 
1999-01-0596
The Use of Swirl Applicator to Reduce Material Usage in Automotive Seam Sealing Operations
 
1999-01-0001
Variability of Test Specimens Used for Evaluating Light Duty Automotive Filter Seal Materials
 
982952
NonLinear Finite Element Analysis of Driveshaft Joint Boots
 
982924
The Use of FEA and DOE for PTFE Oil Seals Optimization
 
980583
Analysis to Reduce the Sliding Friction of Power Steering Rod Seals
 
980582
Considerations for Using High Strength Low Alloy Steel in Bonded Transmission Pistons
 
980580
Finite Element Analysis of a Valve Stem Seal
 
980579
Flange Bending Model and Its Application to Bolt Span Specification
 
980848
IMPROVED HEAT RESISTANT ACRYLIC RUBBER FOR ENGINE OIL SEALS
 
980581
Improvements of Valve Stem Seals to Meet Future Emission Requirements
 
980849
Influence of Sludge on Seal Performance
 
980846
Leakage Characteristics of Brush Mounted Labyrinth Seal With Rotating Speed
 
980847
Prediction of the Life of CVJ Boot in Design Stage and Establishment of an Optimal Design Method with FEA
 
980576
Sealing Systems for Composite Intake Manifolds
 
980577
Some Observations Relative To The Micro Sealing Performance Of Elastmeric Coated Steel Construction Cylinder Head Gaskets
 
980578
Surface Waviness - Sealing's Hidden Enemy
 
980850
The Myth About Low Temperature Performance of Fluoroelastomers in Oil Seal Applications
 
980845
The Propriety of Quadratic Mooney - Rivlin Model for FEM Analysis
 
980575
The Role of the Stopper in the Mechanics of Combustion Seals
 
980584
The Sealing Performance of Elastomer Rotary Lip Seals on Turned Shafts
 
980574
Total Sealing System Process for Automotive Engine Applications
 
971134
Analysis and Interpretation of the Frictional Behavior of Elastomeric Rotary Lip Seals
 
970549
Cure-in Place Gasketing (CIPG) Offers Process and Quality Improvements as a Water Pump Flange Seal
 
970521
Development of High Performance Gasket Materials for Low Cost Continuous Manufacturing
 
970550
Development of an Improved Heavy Duty Dirt Exclusion System for Radial Lip Seals
 
970548
Engine Valve Stem Seal II, Improved Lip with PTFE Layer for Oil Leakage Control
 
970547
Measurement of Rubber Elasticity and Correlation with Seal Life
 
970522
Parametric Model of Elastomeric Bolt Isolators Under Large Deformation
 
970546
The Application of Engineering Thermoplastics for Sealing Automotive Engines
 
970524
The Effect of Flange Flexibility on the Response of Gasketed Bolted Joints Subjected to External Forces
 
960148
New Technology for Polyacrylic (ACM) Elastomers in Automotive Sealing Applications
 
080015
WHAT CARBON DOES TO AUTOMOBILE STEEL
 

SAE Foundation PRI SAE Industry Technologies Consortia - An affiliate of SAE International SAE Brasil SAE India A World In Motion