SAE Standards

E-25 General Standards for Aerospace and Propulsion Systems

Current List of Standards:       For more information, click on the Document Document sort Title sort Date/Status sort AIR1108 Groove Design - Metal Face Seal 2004-07-30 Reaffirmed AIR1273A Identification and Coding of Fluid and Electrical Piping System Functions 2006-05-08 Reaffirmed AIR13 Reaffirmed July 1991 Ra 5/95 (Cancelled Oct 1951) 1995-05-01 Cancelled AIR1471A Torque Tightening Threaded Fasteners 2004-07-23 Reaffirmed AIR1551A Torque Tightening Metric Screw Threaded Fasteners 2006-05-03 Reaffirmed AIR1754A Washer, Thermal Compensating, Metric Series 2006-05-03 Reaffirmed AIR1758 Limits and Fits - International Metric Tolerance System 2006-05-08 Reaffirmed AIR18A Propeller Shaft Ends - Dual Rotation (Engine Supplied Bearing) 2006-10-11 Reaffirmed AIR26A No. 70-90, 70L-90, 80-100 and 80L-100 Propeller Shaft Ends Dual Rotation (Propeller Supplied Bearing) 2006-05-10 Reaffirmed AIR3 Survey of Operating Practices With Propeller Ice Elimination Equipment (Cancelled Mar 1943) 1943-03-01 Cancelled AIR3260 Identification of Standard Utility Parts - Bolts and Nuts 2006-05-04 Reaffirmed AIR3276 Boss - Plug/Pin, Expansion Type Hole Preparation 2006-10-10 Reaffirmed AIR3277 Installation Procedures - Pin/Plug Expansion Type 2006-10-10 Reaffirmed AIR39 Water Compatibility of Aircraft Greases (Cancelled Mar 1955) 1995-05-01 Cancelled AIR40 Corrosion Preventative Characteristics of Aircraft Greases (Cancelled Mar 1955) 1995-05-01 Cancelled AIR41 Stability of Aircraft Greases (Cancelled Mar 1955) 1995-05-01 Cancelled AIR42 Contamination Studies of Aircraft Greases (Cancelled Mar 1955) 1995-05-01 Cancelled AIR43 Low Temperature Torque Test for Aircraft Greases (Cancelled Mar 1955) 1995-05-01 Cancelled AIR44 Load Support Characteristics of Aircraft Greases (Cancelled Mar 1955) 1995-05-01 Cancelled AIR4923 Bolts and Screws, Aerospace Engine - Materials, Procurement Specifications and Properties 2006-10-11 Reaffirmed AIR5926 White Paper to Support Supersession of MIL-S-8879C With AS8879C 2007-06-27 Reaffirmed AIR809A Metal Dimensional Change with Temperature 2006-05-03 Reaffirmed ARP1231A Gland Design, Elastomeric O-Ring Seals, General Considerations 2006-05-03 Reaffirmed ARP1232B Gland Design, Elastomeric O-Ring Seals, Static Radial 2006-05-03 Reaffirmed ARP1233A Gland Design, Elastomeric O-Ring Seals, Dynamic Radial, 1500 psi Max 2006-05-03 Reaffirmed ARP1234B Gland Design, Elastomeric O-Ring Seals, Static Axial, Without Back-Up Rings 2006-05-11 Reaffirmed ARP142B Assembling of Studs in Aluminum and Magnesium 2004-02-23 Revised ARP1515A Threaded Fastener Protrusion Through Self-Locking Nuts 2006-05-03 Reaffirmed ARP166A Propeller Clearance Envelope (NONCURRENT Aug 1973) 2006-05-02 Reaffirmed ARP169A Numbering of Aircraft Engine Cylinders 2006-05-10 Reaffirmed ARP179 Involute Spline Gages (30-- Pressure Angle) (Cancelled Oct 1997) 1997-10-01 Cancelled ARP1902A Bolt, Tee Head, Interface Surface, Dimensions for 2006-05-03 Reaffirmed ARP2B Horsepower Correction Formulae 2006-05-10 Reaffirmed ARP237A Propeller Control Clearance - Single Acting System, Single Rotation Propeller Shaft Reciprocating Engines (NONCURRENT Aug 1973) 2006-05-11 Reaffirmed ARP238A Propeller Control Clearance - Dual Rotation or Double Acting System Single Rotation Propeller Shaft Reciprocating Engines (NONCURRENT Aug 1973) 2006-05-11 Reaffirmed ARP244A Propeller Control Installation Clearance (NONCURRENT Aug 1973) 2006-05-11 Reaffirmed ARP246C Orientation of Engine Axis, Coordinate and Numbering Systems for Aircraft Gas Turbine Engines 2006-05-04 Reaffirmed ARP260D Control Lever Connections (60° V Serrations) 2006-05-10 Reaffirmed ARP265 Airfoil Shapes - Dimensioning of Turbine Engine (Cancelled, May 96) 1995-05-01 Cancelled ARP277A Propeller Attachment - Nose Mounted (NONCURRENT May 1995) 2006-07-27 Reaffirmed ARP355A Terminology of Dual and Coaxial Counter-Rotating Propellers 2004-02-23 Revised ARP365A Drives - Square Flange .600 PD Spline Accessory (NONCURRENT Aug 1973) 2006-05-11 Reaffirmed ARP373B Propeller Shaft Torque Ratings 2006-10-10 Reaffirmed ARP375C Propeller Shaft Ends - Dual Rotation (Propeller Supplied Bearing) (NONCURRENT May 1995) 2006-07-27 Reaffirmed ARP381A Hub, Flanged - Spline Type Wood Propeller - #10, #20 (NONCURRENT Aug 1973) 2006-05-11 Reaffirmed ARP4848 Flaring (Swaging) and Removal of Shank Nuts 2004-02-05 Reaffirmed ARP502 Propeller Shaft Ends - Flanged Small Aircraft Engine 2006-07-27 Reaffirmed ARP510A Moment Weight of Turbine and Compressor Rotor Blades 2006-05-04 Reaffirmed ARP573D Silver, Copper and Nickel Alloy Brazed Joints for Aerospace Propulsion Systems 2006-05-04 Reaffirmed ARP671A Bearing, Ball Annular (NONCURRENT Oct 2001) 2006-05-04 Reaffirmed ARP674C Groove Design, Metal O-Ring Gasket 2006-05-10 Reaffirmed ARP676 Lever Ends (Involute Serrations) 2006-07-27 Reaffirmed ARP688A Reusable Lock for Spanner Nuts 2007-06-28 Reaffirmed ARP700B High Strength Elevated Temperature Bolting Practice 2006-05-10 Reaffirmed ARP748A Gas Turbine Engine Power Take-Off Pad Requirements 2004-02-23 Revised ARP843A Chip Detector, Electrical Connection, Remote Indicating 2006-05-04 Reaffirmed ARP953B Stress Dome in Fasteners 2006-05-10 Reaffirmed AS1B Altitude Graphs, Aircraft Reciprocating Engine Performance 2006-05-10 Reaffirmed AS100001C Gasket - Type X or XV Engine Accessory Drive (NONCURRENT May 1995) 2006-08-14 Reaffirmed AS100002C Gasket - Type XI Engine Accessory Drive (NONCURRENT May 1995) 2006-08-14 Reaffirmed AS100003C Gasket - Type XII, XIV-A and XIV-B Engine Accessory Drive (NONCURRENT May 1995) 2006-08-14 Reaffirmed AS100004C Gasket - Type XIII Engine Accessory Drive (NONCURRENT May 1995) 2006-10-10 Reaffirmed AS100005C Gasket - Type XIV-C Engine Accessory Drive (NONCURRENT May 1995) 2006-10-10 Reaffirmed AS100006C Gasket - Type XVI Engine Accessory Drive (NONCURRENT May 1995) 2006-10-10 Reaffirmed AS100007C Gasket - Type XIX Engine Accessory Drive 2006-10-10 Reaffirmed AS100016 Lockwire, Brass 2007-06-26 Reaffirmed AS100026A Safety Wire - Cres AMS 5685 2006-08-14 Reaffirmed AS1050 Nut, Self-Locking, Accessory Mounting 2006-05-02 Reaffirmed AS107D Surface Finish (RMS) (NONCURRENT Oct 2001) 2006-05-04 Reaffirmed AS1078 Fitting End - Flared Tube Connection, Extended Thread 2006-05-05 Reaffirmed AS1105A Service Time Coding of Propulsion Engine Items (NONCURRENT Oct 2001) 2006-05-04 Reaffirmed AS1132H Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard 2008-10-17 Revised AS115401A Screw - Flate Fillister Head, Cadmium Plated, Steel UNS G87400, 125 ksi min. .1900-32 UNF-3A 2008-12-22 Revised AS115451B Screw - Flate Fillister Head, Cadmium Plated, Steel UNS G87400, 125 ksi min. .2500-28UNF-3A 2009-04-08 Revised AS115501A Screw - Flate Fillister Head, Cadmium Plated, Steel UNS G87400, 125 ksi min. .3125-24 UNF-3A 2008-12-22 Revised AS115601A Screw - Flat Fillister Head, Drilled Shank, Cadmium Plated, Steel UNS G87400, 125 KSI Min. .1900-32UNF-3A 2009-02-25 Revised AS115651A Screw - Flat Fillister Head, Drilled Shank, Cadmium Plated, Steel UNS G87400, 125 KSI Min. .2500-28UNF-3A 2009-02-26 Revised AS115801B Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min, .1900-32 UNF-3A 2006-06-19 Revised AS115851A Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .2500-20 UNC - 3A 2006-09-07 Revised AS1159B Wrenching Configuration, 12 Lobed, For Threaded Fasteners (NONCURRENT May 1995) 2006-10-10 Reaffirmed AS115901B Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .2500-28 UNF - 3A 2009-07-09 Revised AS115951B Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .3125-18 UNC - 3A 2009-07-13 Revised AS116001A Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .3125-24 UNF-3A 2006-11-02 Revised AS116051A Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .3750-16 UNC-3A 2006-11-02 Revised AS116101A Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .3750-24 UNF-3A 2006-11-02 Revised AS116901 Screw - Oval Fillister Head, .112-40 2005-05-04 Reaffirmed AS116913A Screw - Oval Fillister, Drilled Head, Cadmium Plated, Steel UNS K00802, .1120-40 UNC - 2A 2006-06-27 Revised AS116925 Screw - Oval Fillister Head, .138-32 2007-06-26 Reaffirmed AS116961A Screw - Oval Fillister Drilled Head, .138-32 2005-05-04 Reaffirmed AS117001 Screw - Oval Fillister Head, .164-32 2005-05-04 Reaffirmed AS117041 Screw - Oval Fillister Drilled Head, .164-32 2005-05-04 Reaffirmed AS1171A Boss - Fluid Connection, Internal Straight Thread, Shallow Tap 2006-05-05 Reaffirmed AS1177A Nondestructive Inspection Standards for Bolts and Screws 2006-05-03 Reaffirmed AS121501A Nut, Plain - Hexagon, Steel UNS G87400, Cadmium Plated, 125 ksi min 2005-04-15 Revised AS121601A Pin, Straight, Headed, Cadmium Plated, UNS G87400, .125 Nom 2008-10-20 Revised AS121651A Pin, Straight, Headed, Cadmium Plated, UNS G87400, .187 Nom 2008-10-20 Revised AS121701A Pin, Straight, Headed, Cadmium Plated, UNS G87400, .250 Nom 2008-10-20 Revised AS121751A Pin, Straight, Headed, Cadmium Plated, UNS G87400, .312 Nom 2008-10-20 Revised AS121801A Pin, Straight, Headed, Cadmium Plated, UNS G87400, .375 Nom 2008-10-20 Revised AS121851A Pin, Straight, Headed, Cadmium Plated, UNS G87400, .500 Nom 2008-10-20 Revised AS122026A Washer - Lock, Spring, Cadmium Plated 2007-05-29 Revised AS122676B Pin, Straight, Headless, Steel, UNS G10950 2008-08-19 Revised AS1229C Insert, Screw Thread, Helical Coil, Stud Locking, Performance Standard For 2007-07-16 Revised AS123020 Gasket - Aluminum - Non Asbestos, Annular 2007-06-26 Reaffirmed AS123151A Rivet, Universal Head, High Temperature, 347 Cres UNS S34700 2006-08-10 Revised AS123301A Rivet, Solid, Universal Head, Nickel Alloy UNS N06600 2006-07-24 Revised AS123451B Rivet, Solid, 100° Flush Head, High Temperature, 347 Cres, UNS S34700 2006-08-10 Revised AS123601B Rivet, Solid, 100° Flush Head, Nickel Alloy UNS N06600 2007-07-03 Revised AS123751B Pin, Cotter-Cres, UNS S30200, AS7210 2004-06-29 Revised AS124951 Rive - 100Md Countersunk Head, Corrosion Resistant Steel 2005-05-04 Reaffirmed AS125101A Rivet - 100° - Countersunk Head, Mild Steel 2006-07-27 Reaffirmed AS125251A Rivet - 100° Countersunk Head, Aluminum Alloy 2006-08-14 Reaffirmed AS125401 Rivet - Universal Head, Corrosion Resistant Steel 2005-05-04 Reaffirmed AS125551 Rivet - Universal Head, Mild Steel 2005-05-04 Reaffirmed AS125701A Rivet - Universal Head, Aluminum Alloy 2006-08-14 Reaffirmed AS125851B Plug - Pipe, Cadmium Plated, Steel UNS G87400, Countersunk Hex 2007-05-29 Revised AS126275B Stud - Straight, Cadmium Plated, Steel, UNS G87400, 125 ksi min, .3125 - 18 NS X .3125 - 24 UNF-3A 2005-10-25 Revised AS126587A Stud - Straight, Cadmium Plated, Steel, UNS G87400, 125 ksi min, .3750 - 16 NS x .3750 - 24 UNF-3A 2007-06-27 Reaffirmed AS126881 Stud - Straight, Necked, .375-16 X .375-24 2005-05-04 Reaffirmed AS127D Propeller Shaft End, Flanged Type - No. 1, 2, 3, 4, 5, & 6 2006-05-05 Reaffirmed AS127193 Stud - Straight, Necked, .4375-14 X .4375-20 2005-05-04 Reaffirmed AS128363 Stud - Straight, Drilled, .250-20 x .250-28 2007-06-26 Reaffirmed AS128687 Stud - Straight, Drilled, .3125-18 x .3125-24 2007-06-26 Reaffirmed AS129293 Stud- Straight, Drilled, .3125-18 X .3125-24 2005-05-04 Reaffirmed AS13 Magnetos, Aircraft, Drives for (NONCURRENT Jul 1991) 2006-05-10 Reaffirmed AS131A Pads, Oil Inlet and Outlet, Types I, II & III - For Airplane Connections, Aircraft Engines (NONCURRENT May 1995) 2006-05-31 Reaffirmed AS1310B Fastener Torque for Threaded Applications, Definitions Of 2006-05-05 Reaffirmed AS132 Pin - Taper (Cancelled Dec 2002) 2002-12-16 Cancelled AS1325 Wrench Configuration, 12 Lobed Drive 2006-10-10 Reaffirmed AS1337A Selected Aerospace Diameter Pitch Combinations of Metric 60° Screw Threads for Nuts and Bolts 2006-05-05 Reaffirmed AS1338 Aerospace Metric 60° Screw Thread Profile and Tolerance Classes 2006-05-05 Reaffirmed AS134 Bolt Heads, Hexagon - Large Fillet Aircraft Engine (Cancelled Dec 2002) 2002-12-16 Cancelled AS1349A Insert, Screw Thread, Helical Coil, Locking (Low Friction Systems), Performance Standard For 2006-05-10 Reaffirmed AS135 Screw Heads, Flat Fillister - Large Fillet Aircraft Engine (Cancelled Dec 2002) 2002-12-16 Cancelled AS13572 Springs, Helical, Compression and Extension 2006-05-11 Reaffirmed AS1371 Nuts, Self-Locking Corrosion, Resistant Steel, High Strength, Prevailing Torque, All Metal, 800 Degrees F (427 Degrees C) Use, Unj Thread Form (NONCURRENT Mar 1993) 2004-07-23 Reaffirmed AS1414 Propeller Shaft End - Flanged, 5.125 (130.175) Bolt Circle 2006-10-10 Reaffirmed AS1421 Aerospace Selected Diameter - Pitch Combinations of Metric 60° Screw Threads for Shaft or Bearing Retaining Screw Threads 2006-05-03 Reaffirmed AS14244 Clamp, Loop Type, Bonding, Metric 2005-05-04 Reaffirmed AS14274 Pin, Quick Release, Positive Locking, "L" Handle, Single Action, Detent Wrench/Safety Pin (Slotted) 2005-05-04 Reaffirmed AS1495A Shaft Nut and Keywasher Installation Dimensions For 2006-10-11 Reaffirmed AS150171B Gasket - Copper, Cadmium Plated, Tube Connection 2007-05-29 Revised AS150201 Pin - Lock, Steel 2005-05-04 Reaffirmed AS150301 Pin-Lock, Brass 2007-06-26 Reaffirmed AS150401 Nut-Hex, Check 2005-05-04 Reaffirmed AS150426A Nut - Hex, Check 2005-08-18 Revised AS150501A Stud, Stepped, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .2500-20 UNS X .1900-32 UNF-3A 2006-08-21 Revised AS1508 Undercuts for Straight Screw Threads - Metric 2006-10-11 Reaffirmed AS150801A Stud, Stepped, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .3125-18 UNS X .2500-28 UNF-3A 2006-05-18 Revised AS151401A Stud, Stepped, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .4375-14 UNS X .3750-24 UNF-3A 2006-05-18 Revised AS151701A Stud, Stepped, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .5000-13 UNS X .4375-20 UNF-3A 2006-05-18 Revised AS1520 Areas For Calculating Stress Or Load Values For Metric Mjexternally Threaded Fasteners (Cancelled Jul 2002) 2002-07-23 Cancelled AS152601A Stud, Stepped, Drilled 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .2500-20 UNS X .1900-32 UNF-3A 2006-05-04 Revised AS152901A Stud, Stepped, Drilled 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .3125-18 UNS X .2500-28 UNF-3A 2006-05-04 Revised AS153201 Stud, Stepped, Drilled, 1.5 Dia Engagement, .375-16 x .3125-24 2007-06-26 Reaffirmed AS154701 Stud, Stepped, 2 Dia Engagement .250-20 X .190-32 2005-05-04 Reaffirmed AS155001A Stud, Stepped, 2 Dia Engagement, Cadmium Plated, Steel UNS G87400, .3125-18 UNS X .2500-28 UNF-3A 2007-02-07 Revised AS1553A Performance Standard for Tube Support Loop-Cushioned Clamp 2004-07-23 Reaffirmed AS155301A Stud, Stepped, 2 Dia Engagement, Cadmium Plated, Steel UNS G87400, .3750-16 UNS X .3125-24 UNF-3A 2007-02-07 Revised AS155901A Stud, Stepped, 2 Dia Engagement, Cadmium Plated, Steel UNS G87400, .5000-13 UNS X .4375-20 UNF-3A 2007-02-07 Revised AS1560A Modules and Basic Racks of Metric Spur and Helical Gears 2006-05-03 Reaffirmed AS1561 Stud, Locked In - Ring, Straight, Installation and Removal Of 2006-05-03 Reaffirmed AS158901A Stud, Stepped, Necked, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .4375-14 UNS X .3750-24 UNF-3A 2007-02-07 Revised AS1620 Stud, Locked In - Ring, Straight, Hole Preparation For 2006-05-05 Reaffirmed AS162501A Stud, Stepped, Drilled, Necked, 2 Dia Engagement, Cadmium Plated, Steel UNS G87400, .4375-14 UNS X .3750-24 UNF-3A 2007-02-07 Revised AS167A Chart - Humidity Indicator, Color Comparison 2006-07-27 Reaffirmed AS16842A Clamp, Wire, Rope, Saddled, Single Grip, Steel (Cancelled Aug 2005) 2005-08-18 Cancelled AS1701C Lubricant, Solid Film 2004-07-23 Reaffirmed AS17184B Screw, Externally Relieved Body, Cres - (Synchro) 2009-05-05 Revised AS172201 Washer, Key-Single, Bearing Retaining, Ams 8350 (Asg) 2005-05-04 Reaffirmed AS172236B Nut, Spanner, Bearing Retaining, Aeronautical, UNS G41400 2009-02-20 Revised AS172271 Washer, Key-Single, Ams 6350 (Asg) 2005-05-04 Reaffirmed AS172321A Nut, Spanner, Aeronautical, UNS G41400 2007-06-27 Reaffirmed AS176C Limits, Table of Limits and Lubrication Charts 2006-05-04 Reaffirmed AS177B Operating Instructions for Aircraft Engines (Preparation of) 2006-05-04 Reaffirmed AS178 Two-Speed Propeller Reduction Gear Control (Cancelled Jan 1988) 1995-05-01 Cancelled AS180A Propeller Hub - Single Rotation 2006-05-05 Reaffirmed AS194A Nomenclature - Engine Cooling Fan (NONCURRENT Aug 1973) 2006-05-11 Reaffirmed AS1958 Port - Fluid Connection, Ring Locked Insert, Standards Dimensions For 2004-07-23 Reaffirmed AS1959 Insert - Ring Locked, Fluid Connection Port Design, Installation and Removal Of 2004-07-23 Reaffirmed AS20C Definitions, Aircraft Reciprocating Engine Performance 2006-05-10 Reaffirmed AS20005 Drive - Type Xv Engine Accessory - Design Standard For 2004-09-21 Issued AS20010 Drive - Type Xx Engine Accessory - Design Standard For 2004-09-21 Issued AS20253 Pin, Hinge 2005-05-04 Reaffirmed AS221A Gasket - Two-Bolt Exhaust Flange (NONCURRENT Aug 1973) 2006-05-11 Reaffirmed AS222A Flange - Two-Bolt Exhaust (NONCURRENT Aug 1973) 2006-05-11 Reaffirmed AS223A Flange Installation - Two-Bolt Exhaust (NONCURRENT Aug 1973) 2006-05-11 Reaffirmed AS24585B Spring, Helical, Compression: For Loads Below 20 Pounds 2007-06-27 Reaffirmed AS24586 Spring, Helical, Extension: For Loads Below 30 Pounds 2006-05-03 Reaffirmed AS25109 Engines, Aircraft, Reciprocating, General Specification For 2005-05-04 Reaffirmed AS25281A Clamp, Loop, Plastic, Wire Support 2005-01-21 Revised AS269H Identification of Material for AN, MS, and AS Engine and Propeller Standard Utility Parts and Also for Company Parts 2006-05-10 Reaffirmed AS291E Surface Texture, Roughness, Waviness and Lay (NONCURRENT Oct 2001) 2006-05-04 Reaffirmed AS3040A Installation - Multiple Tube Detachable Cushion Clamp 2006-10-10 Reaffirmed AS3062C Bolts, Screws and Studs - Screw Thread Requirements 2006-05-03 Reaffirmed AS3063B Bolts, Screws and Studs, Geometric Control Requirements 2006-05-03 Reaffirmed AS3066A Nut, Self-Locking, Double Hexagon, Reduced Envelope, Ams 7251 (NONCURRENT Oct 2004) 2004-10-14 Non Current AS3067B Nut, Self-Locking, Double Hexagon, Reduced Envelope, As7251 2004-07-23 Reaffirmed AS3068A Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251 2006-07-27 Reaffirmed AS3069 Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251 2006-07-27 Reaffirmed AS307 Cover, Flight - Governor Mounting Pad 2006-05-05 Reaffirmed AS3070 Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251 2006-07-27 Reaffirmed AS3071B Acceptance Criteria - Magnetic Particle, Fluorescent Penetrant, and Contrast Dye Penetrant Inspection 2004-07-23 Reaffirmed AS3072B Gasket - 37° Flared Tube Fitting, Copper, AMS 4500 (NONCURRENT Feb 1998) 2007-06-27 Reaffirmed AS3073C Gasket - 37° Flared Tube Fitting, Copper, AMS 4500 (NONCURRENT Feb 1998) 2007-06-27 Reaffirmed AS3074C Gasket - 37° Flared Tube Fitting, Nickel, AMS 5553 (NONCURRENT Feb 1998) 2007-02-07 Revised AS3075D Gasket - 37° Flared Tube Fitting, Nickel, AMS 5553 (NONCURRENT Feb 1998) 2007-02-07 Revised AS3076 Ring - Back-Up, Boss Connection, Polytetrafluoroethylene 2006-10-10 Reaffirmed AS3080 Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 1.5 Dia Nom Length 2006-07-31 Reaffirmed AS3081 Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 2 Dia. Nom. Length 2006-07-27 Reaffirmed AS3082 Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 2.5 Dia. Nom. Length 2006-07-27 Reaffirmed AS3083 Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 3 Dia. Nom. Length 2006-07-27 Reaffirmed AS3084 Packing, Preformed - AMS 7280 - Seal 2006-10-10 Reaffirmed AS3085 Packing, Preformed - AMS 7280 - 'O'-Ring 2006-07-27 Reaffirmed AS3086A Stud - Straight, Key Locked, Cadmium Plated, Steel, .1900-32 UNJF-3A X .1900-32 UNJF-3A 2007-05-29 Revised AS3087A Stud - Straight, Key Locked, Cadmium Plated, Steel, .250-28 UNJF-3A X .250-28 UNJF-3A 2007-05-29 Revised AS3088A Stud, Straight, Key Locked, Cadmium Plated, Steel, .3125-24 UNJF-3A X .3125-24 UNJF-3A 2007-05-29 Revised AS3089A Stud, Straight, Key Locked, Cadmium Plated, Steel, .3750-24 UNJF-3A X .3750-24 UNJF-3A 2007-05-29 Revised AS3090 Stud - Straight, Key Locked, Cres AMS 5731, .190-32 UNJF X .190-32 UNJF 2006-07-27 Reaffirmed AS3091 Stud - Straight, Key Locked, Cres AMS 5731, .250-28 UNJF X .250-28 UNJF 2006-07-27 Reaffirmed AS3092 Stud - Straight, Key Locked, Cres AMS 5731, .3125-24 UNJF X .3125-24 UNJF 2006-07-27 Reaffirmed AS3093 Stud - Straight, Key Locked, Cres AMS 5731, .375-24 UNJF X .375-24 UNJF 2006-07-27 Reaffirmed AS3094 Insert - Cres Helical Coil Fine Thread, Locking (Low Friction Systems) 1.5 Dia. Nom. Length 2006-07-27 Reaffirmed AS3095 Insert - Cres Helical Coil Fine Thread, Locking (Low Friction Systems) 2 Dia Nom Length 2006-05-03 Reaffirmed AS3096 Insert - Cres Helical Coil Fine Thread, Locking (Low Friction Systems) 2.5 Dia Nom Length 2006-05-03 Reaffirmed AS3097 Insert - Cres Helical Coil Fine Thread, Locking (Low Friction Systems) 3 Dia Nom Length 2006-05-03 Reaffirmed AS3098 Screw, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .164-36 UNJF-3A 2006-05-02 Reaffirmed AS3099 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .190-32 UNJF-3A 2006-05-02 Reaffirmed AS3100 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .250-28 UNJF-3A 2006-05-02 Reaffirmed AS3101 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .3125-24 UNJF-3A 2006-05-02 Reaffirmed AS3102 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .375-24 UNJF-3A 2006-05-02 Reaffirmed AS3103 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .4375-20 UNJF-3A 2006-05-02 Reaffirmed AS3104 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .500-20 UNJF-3A 2006-05-02 Reaffirmed AS3105 Bolt, Machine - Hexagon Head, Pd Shank, Cres Ams 5731, .5625-18 Unjf-3a 2004-02-23 Reaffirmed AS3106 Screw, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres Ams 5731, .164-36 Unjf-3a 2004-07-30 Reaffirmed AS3107 Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres Ams 5731, .190-32 Unjf-3a 2004-02-23 Reaffirmed AS3108 Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres Ams 5731, .250-28 Unjf-3a 2004-02-23 Reaffirmed AS3109 Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Cres AMS 5731, .3125-24 UNJF-3A 2006-05-03 Reaffirmed AS3110 Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Cres AMS 5731, .375-24 UNJF-3A 2006-05-03 Reaffirmed AS3111 Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres Ams 5731, .4375-20 Unjf-3a 2004-02-23 Reaffirmed AS3112 Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Cres AMS 5731, .500-20 UNJF-3A 2006-05-03 Reaffirmed AS3113 Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Cres AMS 5731, .5625-18 UNJF-3A 2006-05-03 Reaffirmed AS3114 Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .190-32 Unjf-3a 2004-02-23 Reaffirmed AS3115 Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, Cres AMS 5731, .250-28 UNJF-3A 2006-05-05 Reaffirmed AS3116 Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, Cres AMS 5731, .3125-24 UNJF-3A 2006-05-11 Reaffirmed AS3117 Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .375-24 Unjf-3a 2004-02-23 Reaffirmed AS3118 Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .4375-20 Unjf-3a 2004-02-23 Reaffirmed AS3119 Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .500-20 Unjf-3a 2004-02-23 Reaffirmed AS3120 Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .5625-18 Unjf-3a 2004-02-23 Reaffirmed AS3121A Plug, Expansion - Aluminum, 2024-T4 and 2024-T351, Long; Std and .010 Oversize Diameters (UNS A92024) 2008-09-03 Revised AS3122A Pin, Expansion - Aluminum, 2024-T4 and 2024-T351, Long (UNS A92024) 2008-09-03 Revised AS3123A Plug, Expansion - Aluminum, 2024-T4, and 2024-T351, Short; Std and .010 Oversize Diameters, UNS A92024 2009-02-10 Revised AS3124A Pin, Expansion - Aluminum, 2024-T4 and 2024-T351, Short, UNS A92024 2009-02-10 Revised AS3125A Plug, Expansion - Cres, 416 or 416SE, Long; Std and .010 Oversize Diameters, UNS S41600/UNS S41623 2009-02-05 Revised AS3126A Pin, Expansion - Cres, 416 or 416SE, Long, UNS S41600/UNS S41623 2009-02-05 Revised AS3127A Plug, Expansion - Cres, 416 or 416SE, Short; Std and .010 Oversize Diameters, UNS S41600/UNS S41623 2009-02-05 Revised AS3128A Pin, Expansion - Cres, 416 or 416SE, Short, UNS S41600/UNS S41623 2009-02-05 Revised AS3129A Plug, Expansion - Cres, 303, Long; Std and .010 Oversize Diameters, UNS S30300 2009-02-05 Revised AS3130A Pin, Expansion - Cres, 303, Long, UNS S30300 2009-02-05 Revised AS3131A Plug, Expansion - Cres, 303, Short; Std and .010 Oversize Diameters, UNS S30300 2009-02-05 Revised AS3132A Pin, Expansion - Cres, 303, Short, UNS S30300 2009-02-04 Revised AS3139A Stud Stepped - 2.5 Dia. Engagement, Pd Shank, Ams 5731, .5625-18 Unjf-3a X .500-20 Unjf-3a (NONCURRENT Mar 1999) 2004-07-23 Reaffirmed AS3140A Stud Stepped - 2.5 Dia. Engagement, Pd Shank, Ams 5731, .3125-24 Unjf-3a X .250-28 Unjf-3a (NONCURRENT Mar 1999) 2004-07-23 Reaffirmed AS3141A Stud Stepped - 2.5 Dia. Engagement, Pd Shank, Ams 5731, .375-24 Unjf-3a X .3125-24 Unjf-3a (NONCURRENT Mar 1999) 2004-07-23 Reaffirmed AS3142A Stud Stepped - 2.5 Dia. Engagement, Pd Shank, Ams 5731, .4375-20 Unjf-3a X .375-24 Unjf-3a (NONCURRENT Mar 1999) 2004-07-23 Reaffirmed AS3143A Stud Stepped - 2.5 Dia. Engagement, Pd Shank, Ams 5731, .500-20 Unjf-3a X .4375-20 Unjf-3a (NONCURRENT Mar 1999) 2004-07-23 Reaffirmed AS3144 Stud, Stepped - 2.5 Dia Engagement, PD Shank, AMS 5731, .5625-18 UNJF-3A X .500-20 UNJF-3A 2006-10-10 Reaffirmed AS3147 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .190-32 UNJF-3A 2006-05-03 Reaffirmed AS3148 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .250-28 UNJF-3A 2006-05-03 Reaffirmed AS3149 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .3125-24 UNJF-3A 2006-05-03 Reaffirmed AS3150 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .375-24 UNJF-3A 2006-05-03 Reaffirmed AS3151 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .4375-20 UNJF-3A 2006-10-10 Reaffirmed AS3152 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Ams 4967, .500-20 Unjf-3a 2004-07-23 Reaffirmed AS3153 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .5625-18 UNJF-3A 2006-10-10 Reaffirmed AS3156 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .190-32 UNJF-3A 2006-10-10 Reaffirmed AS3157 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .250-28 UNJF-3A 2006-10-10 Reaffirmed AS3158 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .3125-24 UNJF-3A 2006-10-10 Reaffirmed AS3159A Bolt, Machine-Double Hexagon Extended Washer Hd, Drilled, Close Tolerance Shank, TI Alloy, UNS R56400, 160 ksi Min .3750-24, UNJF-3A 2008-10-01 Revised AS3160 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .4375-20 UNJF-3A 2006-10-10 Reaffirmed AS3161 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .500-20 UNJF-3A 2006-10-10 Reaffirmed AS3162 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .5625-18 UNJF-3A 2006-10-10 Reaffirmed AS3163 Nut, Plain - O.D. Slots, Key Washer Locked, AMS 6322, MIL-S-8879 2006-05-05 Reaffirmed AS3167 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .190-32 UNJF-3A 2006-10-10 Reaffirmed AS3168 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .250-28 UNJF-3A 2006-10-10 Reaffirmed AS3169 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .3125-24 UNJF-3A 2006-10-10 Reaffirmed AS3170 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .375-24 UNJF-3A 2006-10-10 Reaffirmed AS3171 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .4375-20 UNJF-3A 2006-10-10 Reaffirmed AS3172 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .500-20 UNJF-3A 2006-10-10 Reaffirmed AS3173 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .5625-18 UNJF-3A 2006-10-10 Reaffirmed AS3174 Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .190-32 UNJF-3A 2006-10-10 Reaffirmed AS3175 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .250-28 UNJF-3A 2006-10-10 Reaffirmed AS3176 Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .3125-24 UNJF-3A 2006-10-10 Reaffirmed AS3177 Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .375-24 UNJF-3A 2006-10-10 Reaffirmed AS3178 Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .4375-20 UNJF-3A 2006-10-10 Reaffirmed AS3179 Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .500-20 UNJF-3A 2006-10-10 Reaffirmed AS3180 Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .5625-18 UNJF-3A 2006-05-02 Reaffirmed AS3208 Packing, Preformed - Ams 7276 - Seal 2004-07-30 Reaffirmed AS3209 Packing, Preformed - Ams 7276 O-Ring 2004-07-30 Reaffirmed AS3214 Wire, Safety-Steel, Corrosion and Heat Resistant, AMS 5689 2006-10-10 Reaffirmed AS3215A Ring, Retaining-Spiral, Internal, Heavy Duty, Cres 2004-07-23 Reaffirmed AS3216A Ring, Retaining-Spiral, External, Heavy Duty, Cres 2006-05-02 Reaffirmed AS3217A Ring, Retaining-Spiral, Internal, Light Duty, Cres 2006-05-02 Reaffirmed AS3218A Ring, Retaining-Spiral, External, Light Duty, Cres 2006-05-02 Reaffirmed AS3219A Ring, Retaining, Spiral, Minimum Distortion, Dimensional and Acceptance Standard For 2006-05-08 Reaffirmed AS3221A Cover - Engine Accessory Drive, Square, 2.653 Bolt Circle, AMS 4490 2006-05-05 Reaffirmed AS3222B Cover - Engine Accessory Drive, Square, 5.000 Bolt Circle, AMS 4490 2006-05-03 Reaffirmed AS3223A Cover - Engine Accessory Drive, Round, 5.000 Bolt Circle, AMS 4490 2006-05-03 Reaffirmed AS3224A Cover - Engine Accessory Drive, Round, 8.000 Bolt Circle, AMS 4490 2006-05-03 Reaffirmed AS3225B Cover - Engine Accessory Drive, Round, 10.000 Bolt Circle, AMS 4490 2006-05-03 Reaffirmed AS3228A Rivet - Tubular, Countersunk, AS7228 2006-05-02 Reaffirmed AS3229A Rivet - Tubular, Universal, AS7228 2006-05-02 Reaffirmed AS3230A Rivet - Tubular, Countersunk, AS7232 2006-05-02 Reaffirmed AS3231A Rivet - Tubular, Universal, AS7232 2006-05-02 Reaffirmed AS3232A Bolt, Tee Head - AMS 5708, Chamfered, .1900-32 UNJF-3A 2006-10-11 Reaffirmed AS3233 Bolt, Tee Head - Ams 5708, Chamfered, .2500-28 Unjf-3a 2001-11-28 Reaffirmed AS3234 Bolt, Tee Head - Ams 5708, Chamfered, .3125-24 Unjf-3a 2001-11-28 Reaffirmed AS3235B Bolt, Tee Head - Cres, UNS N07001, 165 ksi min, Chamfered, .3750-24 UNJF-3A 2007-06-27 Reaffirmed AS3236B Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .1900-32 UNJF-3A 2007-06-28 Reaffirmed AS3237B Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .2500-28 UNJF-3A 2007-06-28 Reaffirmed AS3238B Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .3125-24 UNJF-3A 2007-06-28 Reaffirmed AS3239B Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .3750-24 UNJF-3A 2007-06-28 Reaffirmed AS3240B Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .4375-20 UNJF-3A 2007-06-28 Reaffirmed AS3241B Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .5000-20 UNJF-3A 2007-06-28 Reaffirmed AS3242B Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .5625-18 UNJF-3A 2007-06-28 Reaffirmed AS3243B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .1900-32 UNJF-3A 2007-06-28 Reaffirmed AS3244B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .2500-28 UNJF-3A 2007-06-28 Reaffirmed AS3245B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .3125-24 UNJF-3A 2007-06-28 Reaffirmed AS3246B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .3750-24 UNJF-3A 2007-06-28 Reaffirmed AS3247B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .4375-20 UNJF-3A 2007-06-28 Reaffirmed AS3248B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .5000-20 UNJF-3A 2007-06-28 Reaffirmed AS3249B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .5625-18 UNJF-3A 2007-06-28 Reaffirmed AS3250B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185 ksi min, .1900-32 UNJF-3A 2007-06-28 Reaffirmed AS3251B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185 ksi min, .2500-28 UNJF-3A 2007-06-28 Reaffirmed AS3252B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185 ksi min, .3125-24 UNJF-3A 2007-06-28 Reaffirmed AS3253B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185 ksi min, .3750-24 UNJF-3A 2007-06-28 Reaffirmed AS3254B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185 ksi min, .4375-20 UNJF-3A 2007-06-28 Reaffirmed AS3255B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185 ksi min, .5000-20 UNJF-3A 2007-06-28 Reaffirmed AS3256B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185 ksi min, .5625-18 UNJF-3A 2007-06-28 Reaffirmed AS3262A Nut, Self-Locking, Plate - 2 Lug, Floating, Cbored, UNS S66286 2006-05-03 Reaffirmed AS3265 Washer - Flat Load Spreading, Metric, AMS 5525 2006-05-03 Reaffirmed AS3268A Sleeve Half - Reinforcing, Tube 2007-06-29 Reaffirmed AS3269A Sleeve Half - Reinforcing, Tube, Shoulder 2007-06-26 Reaffirmed AS3272 Nut - Self-Locking, Clinch, Serrated Shank, 700 Degrees F, Dry Film Coated, Uns S66286, Unj Thread 2004-07-23 Reaffirmed AS3273 Nut - Self-Locking, Clinch, Serrated Shank, 1200 Degrees F, Silver Plated, Uns S66286, Unj Thread 2004-07-23 Reaffirmed AS3282B Gasket - 37° Flared Tube Fitting, Nickel, AMS 5553 (NONCURRENT Feb 1998) 2007-02-07 Revised AS3291 Nut, Self-Locking, Double Hexagon, Ams 5709 2004-07-23 Reaffirmed AS3293A Gasket - 37° Flared Tube Fitting, Copper, AMS 4500 (NONCURRENT Feb 1998) 2007-06-27 Reaffirmed AS3298 Cushion - Tube Clamp Support, PTFE, Inch 2006-10-10 Reaffirmed AS33 Nuts, Plain Hexagon - Aircraft Engine (Cancelled Jul 2002) 2002-07-23 Cancelled AS3303 Bolt, Machine - Hexagon Head, PD Shank, AMS 5708, .190-32 UNJF-3A 2006-10-10 Reaffirmed AS3307 Bolt, Machine - Hexagon Head, PD Shank, AMS 5708, .250-28 UNJF-3A 2006-10-10 Reaffirmed AS3308 Bolt, Machine - Hexagon Head, PD Shank, AMS 5708, .3125-24 UNJF-3A 2006-10-10 Reaffirmed AS3309 Bolt, Machine - Hexagon Head, PD Shank, AMS 5708, .375-24 UNJF-3A 2006-10-10 Reaffirmed AS3319C Stud - Straight, Ring Locked, Cres AMS 5731, .190-24UNJC X .190-32UNJF 2006-09-11 Revised AS3320C Stud - Straight, Ring Locked, Cres AMS 5731, .250-20UNJC X .250-28UNJF 2006-09-11 Revised AS3321C Stud - Straight, Ring Locked, Cres AMS 5731, .3125-18UNJC X .3125-24UNJF 2006-09-11 Revised AS3322C Stud - Straight, Ring Locked, Cres AMS 5731, .375-16UNJC X .375-24UNJF 2006-09-11 Revised AS3326 Nut, Self-Locking-Captive Washer, Steel 2006-05-03 Reaffirmed AS3332A Gasket - Copper, Tube Connection, Plain 2006-05-03 Reaffirmed AS338 Shipping Containers - Aircraft Engines and Components (Cancelled Jan 1988) 1995-05-01 Cancelled AS339A Cover - Shipping Container Log Data and Inspection Port (NONCURRENT Aug 1973) 2006-05-11 Reaffirmed AS3397 Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251 2006-05-05 Reaffirmed AS3400 Bolt, Machine-Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .190-32 UNJF-3A 2006-05-08 Reaffirmed AS3401 Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .250-28 UNJF-3A 2006-05-03 Reaffirmed AS3402 Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .3125-24 UNJF-3A 2006-10-10 Reaffirmed AS3403 Bolt, Machine-Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .375-24 UNJF-3A 2006-10-10 Reaffirmed AS3404 Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, AMS 5708, .190-32 UNJF-3A 2006-10-10 Reaffirmed AS3405 Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, AMS 5708, .250-28 UNJF-3A 2006-10-10 Reaffirmed AS3406 Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, AMS 5708, .3125-24 UNJF-3A 2006-10-10 Reaffirmed AS3407 Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, AMS 5708, .375-24 UNJF-3A 2006-10-10 Reaffirmed AS3409 Bolt, Tee Head, Ams 5662, Chamfered, .190-32unjf-3a (Stress Rupture Resistant) 2004-07-23 Reaffirmed AS3410A Bolt, Tee Head, Ams 5662, Chamfered, .250-28unjf-3a (Stress Rupture Resistant) 2001-10-01 Revised AS3411A Bolt, Tee Head, AMS 5662, Chamfered, .3125-24UNJF-3A (Stress Rupture Resistant) 2006-05-04 Reaffirmed AS3412A Bolt, Tee Head, Ams 5662, Chamfered, .375-24unjf-3a (Stress Rupture Resistant) 2001-10-01 Revised AS3413 Bolt, Machine-Hexagon Head, PD Shank, AMS 5662, .190-32UNJF-3A (Stress Rupture Resistant) 2006-05-10 Reaffirmed AS3414 Bolt, Machine-Hexagon Head, PD Shank, AMS 5662, .250-28UNJF-3A (Stress Rupture Resistant) 2006-05-05 Reaffirmed AS3415 Bolt, Machine-Hexagon Head, PD Shank, AMS 5662, .3125-24UNJF-3A (Stress Rupture Resistant) 2006-05-10 Reaffirmed AS3416 Bolt, Machine-Hexagon Head, PD Shank, AMS 5662, .375-24UNJF-3A (Stress Rupture Resistant) 2006-05-05 Reaffirmed AS3417 Bolt, Machine, Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5662, .190-32UNJF-3A (Stress Rupture Resistant) 2006-05-10 Reaffirmed AS3418 Bolt, Machine, Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5662, .250-28UNJF-3A (Stress Rupture Resistant) 2006-05-05 Reaffirmed AS3419 Bolt, Machine, Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5662, .3125-24UNJF-3A (Stress Rupture Resistant) 2006-05-10 Reaffirmed AS3420 Bolt, Machine, Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5662, .375-24UNJF-3A (Stress Rupture Resistant) 2006-05-10 Reaffirmed AS3435 Spacer, Sleeve - For .190 Inch Bolt, AMS4901 or AMS4921 2006-10-10 Reaffirmed AS3436 Spacer, Sleeve - For .250 Inch Bolt, AMS4901 or AMS4921 2006-10-10 Reaffirmed AS3472A Ring, Retaining - Internal, Spiral Wound Heavy and Medium Duty, UNS S66286 2006-05-03 Reaffirmed AS3477A Nut, Self Locking - Double Hexagon, Extended Washer, UNS S66286, Silver Plated, UNJ Thread 2006-05-10 Reaffirmed AS3478C Nut, Self-Locking, Plate, Two Lug, Low Height, UNS S66286, Class: 125 ksi/800 °F 2007-06-28 Reaffirmed AS3479E Nut, Self-Locking, Plate, One Lug, Floating, Low Height, UNS S66286, Class: 125 ksi/800 °F 2008-08-19 Revised AS3480C Nut, Self-Locking, Plate, One Lug, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 °F 2007-06-28 Reaffirmed AS3481E Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 °F 2007-06-28 Reaffirmed AS3482C Nut, Self-Locking, Plate, Side By Side, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 °F 2007-06-28 Reaffirmed AS3483A Nut, Self-Locking, Hexagon, Regular Height, UNS S66286, Class: 125 ksi/800 °F 2006-05-10 Reaffirmed AS3484B Gasket - 37° Flared Tube Fitting, Nickel, AMS 5553 (NONCURRENT Feb 1998) 2007-02-07 Revised AS3485 Nut, Self-Locking, 12 Point, Reduced Height, Silver Plate, Uns S66286 2004-07-23 Reaffirmed AS3486C Nut, Self-Locking, Extended Double Hexagon, Reduced Flange, Dry Film Lube, Uns S66286, Class: 160 Ksi/800 Mdf 2004-07-01 Revised AS3490 Stud-Stepped, 1.5 Dia Engagement, .375-16 Unjc-3a Mod X .3125-24 Unjf-3a (Uns S66286) 2004-07-23 Reaffirmed AS3491 Gasket - Type X Or Xv Engine Accessory Drive 2004-07-23 Reaffirmed AS3492 Gasket - Type Xi Engine Accessory Drive 2004-07-23 Reaffirmed AS3493 Gasket - Type Xii, Xiv a and Xiv B Engine Accessory Drive 2004-07-23 Reaffirmed AS3494 Gasket - Type Xiii Engine Accessory Drive 2004-07-23 Reaffirmed AS3495 Gasket - Type Xiv-C Engine Accessory Drive 2004-07-23 Reaffirmed AS3496 Gasket - Type Xvi Engine Accessory Drive 2004-07-23 Reaffirmed AS3497 Gasket - Type Xix Engine Accessory Drive 2004-07-23 Reaffirmed AS3498 Gasket - Engine Accessory Drive 2004-07-23 Reaffirmed AS3502 Insert, Screw Thread, Self Locking Plastic Locking Device, Solid Film Lubricated Self-Broaching Keys, UNS S66286 2007-07-05 Issued AS3503 Insert, Screw Thread, Self Locking Plastic Locking Device, Solid Film Lubricated, Self-Broaching Keys, Oversize UNS S66286 2007-07-05 Issued AS3504A Insert - Thin Wall, Short Self-Locking, 1025 Degrees F, Silver Plated Uns N07718, Unj Thread 2004-03-24 Revised AS3505A Insert - Thin Wall, Long Self-Locking, 1025 Degrees F, Silver Plated Uns N07718, Unj Thread 2004-03-24 Revised AS3506A Insert - Screw Thread, Thin Wall, Self-Locking Uns N07718, Silver Plated, Class: 185 Ksi/1025 Degrees F, Procurement Specification 2004-03-24 Revised AS3507B Insert - Thin Wall, Self-Locking Short and Long Length Installation and Removal Of 2005-02-10 Revised AS3508 Insert - Thin Wall, Short and Long Hole Preparation For 2004-07-23 Reaffirmed AS3509B Cable, Safety, Kit, Nickel Alloy, UNS N0660 2008-09-17 Revised AS3510B Cable, Safety, Kit, Corrosion and Heat Resistant Steel, UNS S32100 2008-08-25 Revised AS3511B Cable, Safety, Kit - Corrosion Resistant Steel, UNS S30400 2008-08-26 Revised AS3528 Bolt, Shear - Double Hex Head, Uns S66286 - 160 Ksi 2004-07-23 Reaffirmed AS3529 Bolt, Shear - Double Hex Head, Drilled Shank Uns S66286 - 160 Ksi 2004-07-23 Reaffirmed AS3530 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, Uns S66286 - 160 Ksi 2004-07-23 Reaffirmed AS3531 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, Drilled Head, Uns S66286 - 160 Ksi 2004-07-23 Reaffirmed AS3532 Bolt, Shear - Double Hex Head, Drilled Shank Uns N07718 - 185 Ksi 2004-07-23 Reaffirmed AS3534A Nut, Self-Locking, Shank, UNS S66286 Silver Plate on Thd Only, UNJ Thread 2007-07-03 Revised AS3535A Nut, Self-Locking, Shank, UNS N07001 Silver Plate, UNJ Thread 2007-07-03 Revised AS3542 Cover - Type XVI, XVII-C, D, E, and F Engine Accessory Drive 2006-05-03 Reaffirmed AS3543 Stud, Locked In, Key Locked, Uns S66286, 140 Ksi/1200Mdf, Lightweight, Self-Broaching Keys 2004-07-23 Reaffirmed AS3544 Stud, Locked In, Key Locked, Uns S66286, 140 Ksi/1200Mdf, Heavy-Duty, Self-Broaching Keys 2004-07-23 Reaffirmed AS3545 Insert, Screw Thread, Self-Locking, Locked In, Key Locked, Heavy-Duty, Self-Broaching Keys, Uns S66286 2004-07-23 Reaffirmed AS3546A Insert, Screw Thread, Self-Locking, Locked In, Key Locked, Extra Heavy Duty, Self-Broaching Keys, UNS S66286 2007-07-05 Revised AS3547 Assembly Nut and Clip, Removable Self-Locking Nut, UNS S66286 2006-05-03 Reaffirmed AS3548 Basket, Removable Self-Locking Nut, UNS S66286 2006-05-03 Reaffirmed AS3549 Sleeve, Removable Self-Locking Nut, UNS S30403 2006-05-03 Reaffirmed AS3550 Assembly Nut, Plate, Removable Self-Locking Nut 2006-05-03 Reaffirmed AS3551 Packing, Preformed - O-Ring Seal, AMS 7272 2006-05-05 Reaffirmed AS3552A Nut, Self-Locking, Double Hexagon, Silver Plated, Extended Wrench Pad 180 ksi, 1400 °F, UNS N07001 2007-08-17 Revised AS3553A Nut, Self-Locking, Double Hexagon, Silver Plated, Counterbored 180 ksi, 1400 °F, UNS N07001 2007-08-17 Revised AS3554A Nut, Self-Locking, Double Hexagon, Silver Plated, Reduced Height 180 ksi, 1400 °F, UNS N07001 2007-08-17 Revised AS3563B Nut, Self-Locking, Double Hexagon, Solid Film Lubricated, Extended Wrench Pad 160 Ksi, 800 Mdf, Uns S66286 2004-06-17 Revised AS3564B Nut, Self-Locking, Double Hexagon, Solid Film Lubricated, Counterbored 160 Ksi, 800 Mdf, Uns S66286 2004-06-17 Revised AS3565 Washer, Flat, Countersunk UNS S66826 2006-05-05 Reaffirmed AS3566 Nut, Self-Locking, Castellated, Prevailing Torque, UNJ 16 Pitch Thread Form 2006-05-05 Reaffirmed AS3568 Screw, Drive, Round Head, Type U AMS 5504 (UNS S41000) 2006-05-09 Reaffirmed AS3569 Packing, Preformed - O-Ring Seal, AMS 7270 2006-05-05 Reaffirmed AS3570 Packing, Preformed - O-Ring Seal, AMS 7274 2006-05-05 Reaffirmed AS3572 Insert, Screw Thread, Non-Locking, Locked In, Key Locked, Heavy-Duty, Self-Broaching Keys, Uns S66286 2004-07-23 Reaffirmed AS3573A Insert, Screw Thread, Non-Locking, Locked In, Key Locked, Extra Heavy-Duty, Self-Broaching Keys, UNS S66286 2007-07-05 Revised AS3574A Bolt, Shear - Double Hex Head, UNS N07718 - 185 ksi 2006-05-02 Reaffirmed AS3577 Pin, Spring - Tubular, Coiled, Standard Duty, UNS N07718 2006-05-05 Reaffirmed AS3578 Packing, Preformed - O-Ring Seal, AMS 7271 2006-05-05 Reaffirmed AS3580 Bolt, Machine - Double Hex Head, PD Shank, UNS N07718 - 185 ksi 2006-05-05 Reaffirmed AS3581 Packing, Preformed - O-Ring Seal, AMS 7259 2006-05-05 Reaffirmed AS3582 Packing, Preformed - O-Ring Seal, AMS 3304 2006-05-05 Reaffirmed AS3584A Pin and Plug, Expansion, Set of Parts Cres, 416 or 416SE, Long; STD and .010 Oversize Diameters, UNS S41600/UNS S41623 2009-02-05 Revised AS3585A Pin and Plug, Expansion, Set of Parts Cres, 416 or 416SE, STD and .010 Oversize Diameters, Short, UNS S41600/UNS S41623 2009-02-05 Revised AS3586A Pin and Plug, Expansion, Set of Parts Cres, 303, Long, UNS S30300 2009-02-04 Revised AS3587A Pin and Plug, Expansion, Set of Parts, STD and 0.10 Oversize Diameters, Cres 303, Short, UNS S30300 2009-02-04 Revised AS3588A Pin and Plug, Expansion, Set of Parts AL Alloy 2024-T4 and 2024-T351, Short; STD and .010 Oversize Diameters, UNS A92024 2009-02-05 Revised AS3589A Pin and Plug, Expansion Set of Parts, Al Alloy 2024-T4 and 2024-T351, Long; Std and .010 Oversize Diameters (UNS A92024) 2008-09-03 Revised AS3601 Nut, Floating, Self-Locking, Attached Retention Element, 450 °F, 125 ksi FTU, UNS S66286 2006-05-09 Reaffirmed AS3602 Nut Element, Attached Retention Element, 450 °F, 125 ksi FTU, UNS S66286 2006-05-09 Reaffirmed AS3611 Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Cobalt-Nickel Alloy Uns R30159, 260 Ksi Min 2004-03-19 Issued AS3613A Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Cobalt-Nickel Alloy, UNS R30159, 260 ksi Min (Cancelled Oct 2007) 2007-10-02 Cancelled AS3616 Nut, Self-Locking, Double Hexagon Reduced Flange, Solid Film Lube Counterbored 180 ksi, 1400 °F, UNS N07001 2007-10-02 Issued AS3622A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, Cobalt-Nickel Alloy, UNS R30159, 260 ksi Min (Cancelled Oct 2007) 2007-10-02 Cancelled AS3623 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cobalt-Nickel Alloy, Uns R30159, 260 Ksi Min 2004-03-19 Issued AS3650 Bolt, Machine - Double Hex Extended Washer Head, Reduced Shank, Uns N07718 - 185 Ksi 2005-02-10 Issued AS3655 CABLE, SAFETY, NICKEL ALLOY, CORROSION RESISTANT (UNS N06625) 2009-05-04 Issued AS3658A Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Cobalt-Nickel Alloy, UNS R30159, 260 ksi min 2009-06-08 Revised AS3659 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, Cobalt-Nickel Alloy, UNS R30159, 260 ksi min 2007-10-18 Issued AS41E Propeller Shaft Ends - Single Rotation (NONCURRENT May 1995) 2006-05-03 Reaffirmed AS4299A Rings, Retaining - Spiral Wound, Uniform Section Corrosion and Heat Resistant, UNS S66286 2006-05-05 Reaffirmed AS4389 Nut - Self-Locking Clinch, Serrated Shank, Hole Preparation, Installation and Removal Procedures 2004-07-23 Reaffirmed AS4393B Nut, Self-Locking, UNS S66286, 1200 °F, 160 000 psi, UNJ Thread 2006-10-11 Reaffirmed AS44A Starter, Mounting Pads and Drives - Types I, II, III & IV (NONCURRENT Aug 1973) 2006-05-11 Reaffirmed AS4417 Nuts, Self-Locking, Alloy, Corrosion and Heat Resistant High Strength, All Metal, Dry Film Lubricated, 1400 °F (760 °C), Procurement Specification 2006-05-04 Reaffirmed AS4506A Bolts and Screws, Steel, Uns S66286 Tensile Strength 160 Ksi, Procurement Specification 2004-07-23 Reaffirmed AS4536B Safety Cable Kit Procurement Specification and Requirement for Use 2008-03-28 Revised AS462 Shafts for Ball Bearing Retaining Spanner Nuts and Key Washers 2006-07-27 Reaffirmed AS469B Drive - Accessory, 8" Bolt Circle (NONCURRENT May 1995) 2006-05-03 Reaffirmed AS47A Pump, Fuel, Mounting Pad and Drive 2004-02-23 Reaffirmed AS4723 Insert, Screw Thread, Self-Locking, UNS S66286, Key Locked, Plastic Self Locking Device, Solid Film Lubricant, Procurement Specification For 2007-07-05 Issued AS4724 Studs and Inserts, Locked In, Self-Broaching Keys - Hole Dimensions and Installation Requirements 2007-07-05 Issued AS4726 Nuts, Self-Locking, UNS S66286 Classification: 220 ksi/850 °F Procurement Specification 2006-10-11 Reaffirmed AS478N Identification Marking Methods 2007-07-03 Revised AS4847A Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For 2007-07-03 Revised AS4877B Bolts and Screws, Nickel Alloy Uns N07718, Classification: 185 Ksi/1200 Mdf, Procurement Specification 2004-11-08 Revised AS4891 Stud, Locked In, Key Locked, Uns S66286, Classification: 140 Ksi, Procurement Specification For 2004-07-30 Reaffirmed AS4892A Insert, Screw Thread, Self-Locking, UNS S66286, Locked In, Key Locked, Procurement Specification For 2008-07-15 Revised AS4958 Performance, Nut, Self-Locking, Castellated, Prevailing Torque, UNJ 16 Pitch Thread Form 2006-05-04 Reaffirmed AS4959 Bolts and Screws, Steel, UNS S66286 Tensile Strength 140 ksi 1650 °F Solution Heat Treatment Aged Before Fillet and Thread Rolling Procurement Specification 2007-06-28 Reaffirmed AS4976 Insert, Screw Thread, Non-Locking, Uns S66286, Locked In, Key Locked, Procurement Specification For 2004-07-27 Reaffirmed AS4983 Spring Pins, Tubular, Coiled Corrosion Resistant Nickel Base Alloy Procurement Specification For 2006-05-04 Reaffirmed AS5054A Areas for Calculating Stress Or Load Values for Externally and Internally Threaded Fasteners 2005-06-20 Revised AS5133 Nut, Floating, Attached Retention Element (A.R.E.) - Hole Dimensions and Installation Requirements 2004-02-05 Reaffirmed AS51989A Stud, Locked In-Ring Locked, Serrated 2006-06-29 Revised AS51990A Ring, Lock, Serrated 2005-12-29 Revised AS51992A Stud, Locked In-Ring, Serrated, High Strength 2007-08-16 Revised AS51997B Ring, Lock, Serrated-High Strength 2005-10-27 Revised AS5272C Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting Procurement Specification 2007-12-10 Revised AS5377 Nut, Self-Locking, 0.7500 Thru 1.5000 Thread Sizes, Uns S66286, 160,000 Psi, 800Mdf, Unj Thread - Procurement Specification 2004-07-27 Reaffirmed AS54 Tachometer Drive - Type I 2006-07-27 Reaffirmed AS5443A Wrenching Element, Spline Drive - Dimensions For 2006-06-19 Revised AS5447 Acceptance Criteria for Nuts - Magnetic Particle, Fluorescent Penetrant, and Visible Penetrant Examination 2004-07-27 Reaffirmed AS55A Tachometer Mounting Pad and Drive - Type II (NONCURRENT May 1995) 2006-05-31 Reaffirmed AS5528A Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting 2009-07-01 Revised AS56C Lever Ends - Fuel and Power Control 2006-05-31 Reaffirmed AS567J Safety Cable, Safety Wire, Key Washers, and Cotter Pins for Propulsion Systems, General Practices for Use Of 2006-05-10 Reaffirmed AS5685 Steel, Corrosion Resistant, Safety Wire, 18Cr-11.5Ni (UNS S30500), Solution Heat Treated, Cold Finished 2006-08-10 Issued AS5878 Nut, Self-Locking, Nickel Alloy, Uns N07001, 1400 Uof, 180,000 Psi, Unj Thread Procurement Specification 2005-06-24 Issued AS63A Carburetor Flange, Aircraft, 4 Bolt - Single Barrel - No. 2, 3, 4, 5, 7 and 9 (NONCURRENT Aug 1973) 2006-05-11 Reaffirmed AS683C Installation Procedures and Torques for Fluid Connections 2006-05-04 Reaffirmed AS685C Piloted Ring Seal Fluid Connection Bosses 2006-05-03 Reaffirmed AS686B Piloted Ring Seal Tube Swivel Connection Assembly 2006-05-04 Reaffirmed AS701C Boss Design for Spark Igniters 2006-05-03 Reaffirmed AS7205 Spring Pins, Tubular, Carbon Steel, Procurement Specification for 2007-12-19 Issued AS7207 Spring Pins, Tubular, Slotted Corrosion and Moderate Heat Resistant Steel Procurement Specification For 2004-07-27 Reaffirmed AS7210A Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification For 2006-05-04 Reaffirmed AS7211A Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification 2006-05-04 Reaffirmed AS7220 Aluminum Rivets, UNS A91100, 99Al (1100-H14) 2006-05-04 Reaffirmed AS7222A Aluminum Rivets, Uns A92117 2.5cu 0.3mg (2117-T4) Procurement Specification 2004-02-05 Reaffirmed AS7225 Rivets, Carbon Steel Procurement Specification For 2006-05-05 Reaffirmed AS7228 Rivets, Steel, Corrosion Resistant 18Cr-9Ni Solution Heat Treated Procurement Specification For 2006-05-10 Reaffirmed AS7229 Rivets, Steel, Corrosion and Heat Resistant 18cr 10.5ni 0.70(Cb + Ta) Solution Heat Treated Procurement Specification For 2004-07-27 Reaffirmed AS7232 Rivets, Solid and Tubular, Nickel Alloy Corrosion and Heat Resistant 74ni 15.5cr 8.0fe Procurement Specification For 2004-07-27 Reaffirmed AS7233 Rivets, Solid, Uns N04400, Corrosion Resistant 67ni 31cu Procurement Specification For 2004-07-27 Reaffirmed AS7234 Rivets, Blind, Corrosion Resistant Alloy 67ni 31cu Procurement Specification For 2004-07-27 Reaffirmed AS7235 Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification For 2006-05-10 Reaffirmed AS7236 Rivets, Alloy, Corrosion and Heat Resistant 52co 20cr 10ni 15w Solution Heat Treated Procurement Specification For 2004-07-27 Reaffirmed AS7237 Rivets, Nickel Alloy, Corrosion and Heat Resistant 47.5ni 22cr 1.5co 9.0mo 0.60w 18.5fe Solution Heat Treated Procurement Specification For 2004-07-27 Reaffirmed AS7240 Washers, Spring Lock, Carbon Steel, Procurement Specification for 2006-11-07 Issued AS7241 Washers, Spring Lock, Corrosion Resistant Steel 18Cr - 9Ni (UNS S30200), Procurement Specification for 2006-11-07 Issued AS7245A Inserts, Screw Thread, Helical Coil 19Cr-9.2Ni, Corrosion Resistant Steel, Procurement Specification For 2007-02-07 Revised AS7246 Inserts, Screw Thread, Helical Coil 72ni 15.5cr 0.95(Cb+Ta) 2.5ti 0.70al 7.0fe Corrosion and Heat Resistant Alloy Procurement Specification For 2004-07-27 Reaffirmed AS7250C Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UN Thread Form 2008-12-19 Revised AS7251B Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UNJ Thread Form 2006-10-11 Reaffirmed AS7252 Nuts, Self-Locking, Steel High Strength, All Metal 450 °F Use, UNJ Thread Form 2006-05-08 Reaffirmed AS7253B Nuts, Self-Locking, Nickel Alloy, UNS N07001 Classification: 180 ksi/1400 °F, Procurement Specification 2006-10-11 Reaffirmed AS7283B Gaskets, Type Xx Engine Accessory Drive Corrosion Resistant Steel Screen Reinforced Controlled Performance 2004-11-04 Revised AS7325B Gasket, Metal O-Ring Corrosion and Heat Resistant Steel Procurement Specification For 2006-05-10 Reaffirmed AS7330 Rings, Retaining - Spiral Wound, Uniform Section Corrosion Resistant Steel Procurement Specification For 2004-07-27 Reaffirmed AS7351 Clamp, Loop Type Bonding 2007-06-27 Reaffirmed AS7431 Bracket, Support Clamp 2007-06-27 Reaffirmed AS7452A Bolts and Screws, Steel, Low Alloy Heat Treated, Roll Threaded 2009-04-24 Revised AS7454A Bolts and Screws, Steel, Low Alloy, Heat Resistant 135 000 psi Tensile Strength, Normalized and Tempered, Roll Threaded 2009-07-14 Revised AS7455A Bolts and Screws, Steel, Low Alloy, Heat Resistant Hardened and Tempered, Roll Threaded 2009-07-10 Revised AS7456A Studs, Steel, Low Alloy Heat Treated, Roll Threaded 2009-07-20 Revised AS7458A Studs, Steel, Low Alloy, Heat Resistant, Normalized and Tempered, Roll Threaded, 135 000 psi Tensile Strength 2009-07-20 Revised AS7459A Bolts and Screws, Steel UNS K14675 Tensile Strength 195 ksi Fatigue and Stress-Rupture Rated Procurement Specification 2006-05-08 Reaffirmed AS7460 Bolts and Screws, Titanium Alloy 6al 4v Procurement Specification For 2004-07-27 Reaffirmed AS7461B Bolts and Screws, Titanium Alloy 6Al-4V, UNS R56400 Fatigue-Rated, Procurement Specification For 2006-06-19 Revised AS7466B Bolts and Screws, Nickel Alloy, Uns N07718 Tensile Strength 185 Ksi Fatigue Rated Procurement Specification 2005-06-07 Revised AS7467A Bolts and Screws, Nickel Alloy, UNS N07718 Tensile Strength 185 ksi Stress Rupture Rated Procurement Specification 2006-05-08 Reaffirmed AS7468B Bolts, Cobalt-Chromium-Nickel Alloy, Uns R30035, Tensile Strength 260 Ksi, Procurement Specification 2004-07-27 Reaffirmed AS7469 Bolts and Screws, Uns N07041 Nickel Alloy, Corrosion and Heat Resistant, 155 Ksi, Procurement Specification 2004-07-27 Reaffirmed AS7470C Bolts and Screws, Steel, Corrosion and Moderate Heat Resistant Heat Treated, Roll Threaded 2008-10-30 Revised AS7471E Bolts and Screws, Nickel Alloy, UNS N07001 Tensile Strength 165 ksi, Corrosion and Heat Resistant, Procurement Specification 2009-07-16 Revised AS7472 Bolts and Screws, Steel, Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded 2006-05-08 Reaffirmed AS7473A Bolts and Screws Roll Threaded Procurement Specification For 2004-07-27 Reaffirmed AS7474B Bolts and Screws, Steel Corrosion Resistant, UNS S17400 Tensile Strength 140 ksi Procurement Specification 2006-05-08 Reaffirmed AS7475C Bolts, Cobalt-Chromium-Nickel Alloy, UNS R30159, Tensile Strength 260 ksi, Procurement Specification 2007-06-27 Reaffirmed AS7477D Bolts and Screws, Steel, Uns S66286 Tensile Strength 130 Ksi, Procurement Specification 2004-07-27 Reaffirmed AS7478B Bolts and Screws, Steel, UNS S66286 Classification: 130 ksi/1200 °F 1800 °F Solution Heat Treated, Aged After Roll Threaded Procurement Specification For 2006-05-10 Reaffirmed AS7479B Bolts and Screws, Steel, UNS S66286 1650 °F Solution Heat Treated Precipitation Heat Treated Before Roll Threaded 2008-08-21 Revised AS7481B Studs, Steel, UNS S66286, Aged After Roll Threaded, Procurement Specification For (NONCURRENT Dec 2001) 2006-05-02 Reaffirmed AS7482B Studs, Corrosion and Heat Resistant Steel, UNS S66286, Tensile Strength 130 ksi, 1800 °F Solution Heat Treated, Aged Before Roll Threading Procurement Specification 2009-09-01 Revised AS82B Screw Thread Form, American National, Modified (National Round - NR) 2006-05-10 Reaffirmed AS84C Splines, Involute (Full Fillet) 2004-07-23 Reaffirmed AS848 Attachment Points, Engine, Remote Trimming Main Fuel Control 2006-10-10 Reaffirmed AS870D Wrenching Configuration, Bi-Hexagonal (12 Point) Drive, Design Standard For 2006-05-02 Reaffirmed AS871B Manufacturing and Inspection Standards for Preformed Packings (O-Rings) 2006-05-04 Reaffirmed AS87132 Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application to Fasteners 2006-09-27 Issued AS880 Propeller Shaft End - Flanged 4.250 (107.95) Bolt Circle 2006-10-10 Reaffirmed AS8879D Screw Threads - Unj Profile, Inch Controlled Radius Root With Increased Minor Diameter 2004-08-09 Revised AS8991 Gasket, Fuselage Light - Cover Screw 2004-07-27 Reaffirmed AS90A Propeller Blades, Aluminum Alloy, Shank Dimensions For (NONCURRENT Feb 1984) 2006-05-11 Reaffirmed AS9025A Clamp - Loop Type Support (Heat Resistant) .265 Hole (Cancelled Jul 2007) 2007-07-05 Cancelled AS903 Remote Trimming Attachment for Aircraft Turbine Engine Controls 2004-07-23 Reaffirmed AS9047 Pin - Spring, Steel, Phosphate Finish 2004-07-27 Reaffirmed AS9058B Ring - Back-Up, Boss Connection, AMS 3652, AMS 3656, AMS 3660, AMS 3667 2007-06-27 Reaffirmed AS90708 Ring, Retaining, External, Interlocking 2006-05-04 Reaffirmed AS90991B Nut, Hexagon, Drilled, Boss Connection, Aluminum - UNS A92024 2007-06-28 Reaffirmed AS91C Propeller Shaft Ends, Dual Rotation (Propeller Supplied Bearing) (NONCURRENT May 1995) 2006-05-03 Reaffirmed AS91001B Nut, Hexagon, Drilled, Boss Connection, Cres - UNS S30400 2007-06-28 Reaffirmed AS9105 Pin, Straight, Headless, AMS 5688, Lock 2007-06-27 Reaffirmed AS91101A Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Ams 5731, .190-32 Unjf-3a 2003-08-07 Revised AS91111A Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Uns S66286 130 Ksi Min, .2500-28 Unjf-3a 2003-08-07 Revised AS9112B Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, UNS S66286, 130 ksi, .3125-24 UNJF-3A 2007-06-27 Reaffirmed AS9141B Gasket - Metal O-Ring, .035 Tube X .006 Wall, Cres 2004-07-28 Revised AS9142B Gasket - Metal O-Ring, .062 Tube X .006 Wall, Cres 2004-07-28 Revised AS9144A Gasket - Type Xx Engine Accessory Drive 2004-08-18 Revised AS9158 Bolt-Machine, Steel, 12 Point Head, .250-28, Black Oxide 2004-07-27 Reaffirmed AS91601B Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Black Oxide, Steel, Uns G87400, 125 Ksi Min, .375-24, Unf-3a 2004-05-25 Revised AS91641A Pin, Straight, Headless, Oversize, Steel, UNS G10950 2005-07-26 Revised AS91691A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .1900-32 UNF-3A 2007-06-26 Reaffirmed AS91701A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .2500-28 UNF-3A 2007-06-26 Reaffirmed AS91711A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .3125-24 UNF-3A 2007-06-26 Reaffirmed AS91721A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .375-24 UNF-3A 2007-06-26 Reaffirmed AS91761A Plug, Expansion - Tapered, AMS 5040 (Cancelled Aug 2005) 2005-08-18 Cancelled AS919 Shallow Groove Shafts and Locking Devices for Bearing Retaining Spanner Nuts 2006-05-02 Reaffirmed AS92B Cones, Front, Propeller Hub 2006-05-11 Reaffirmed AS92001A Nut, Hexagon, Drilled, Boss Connection, Aluminum - UNS A92014 2006-05-02 Reaffirmed AS9201C Nut, Plain, Hexagon, Boss Connection, Silver Plated, 347 Cres UNS S34700 2007-07-23 Revised AS9202B Gasket - Metal O-Ring, .062 Tube X .010 Wall, Cres Uns S32100 2004-07-28 Revised AS9203B Gasket - Metal O-Ring, .094 Tube X .006 Wall, Cres Uns S32100 2004-07-28 Revised AS9204B Gasket - Metal O-Ring, .094 Tube X .010 Wall, Cres Uns S32100 2004-07-28 Revised AS9205B Gasket - Metal O-Ring, .125 Tube X .010 Wall, Cres Uns S32100 2004-07-28 Revised AS9207A Screw, Machine - Steel, Diffused Nickel - Cadmium Plated, Double Hexagon Extended Washer Head, Uns K14675 195 Ksi Min, .1640-36 Unjf-3a 2002-12-12 Revised AS9208B Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675, 195 ksi min, .1900-32 UNJF-3A 2007-06-28 Reaffirmed AS9209A Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Uns K14765, 195 Ksi Min, .2500-28 Unjf-3a 2002-12-12 Revised AS9210A Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Uns K14675, 195 Ksi Min, .3125-24 Unjf-3a 2002-12-12 Revised AS9212A Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675, 195 ksi min, .4375-20 UNJF-3A 2007-06-28 Reaffirmed AS9216A Screw, Machine - Steel, Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, Drilled, Uns K14675, 195 Ksi Min, .1640-36 Unjf-3a 2002-12-12 Revised AS9217A Bolt, Machine - Steel, Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, Drilled, Uns K14675, 195 Ksi Min, .190-32 Unjf-3a 2002-12-12 Revised AS9218C Bolt, Machine - Steel, Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, Drilled, Uns K14675, 195 Ksi Min, .2500-28 Unjf-3a 2004-01-30 Revised AS9219B Bolt, Machine-Steel, Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, Drilled, Uns K14675, 195 Ksi Min, .3125-24 Unjf-3a 2003-11-18 Revised AS9226 Wire - Steel, Corrosion and Heat Resistant, Safety, 1800Mdf 2004-10-01 Issued AS9228 Bracket, Angle, 90Md .190 Bolt 2004-07-27 Reaffirmed AS9230 Bracket, Angle, 90° .190 x .312 Bolt 2007-06-27 Reaffirmed AS9231 Bracket, Angle, 90Md .190 X .375 Bolt 2004-07-27 Reaffirmed AS9245A Pin, Cotter - Cres, Ams 2711 2004-03-24 Revised AS9276A Washer, Key - 180 Deg. Locking, Cres, UNS S32100 2007-06-28 Reaffirmed AS9283A Bolt, Machine - Hexagon Head, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .1900-32 UNJF-3A 2006-06-27 Revised AS9284A Bolt, Machine - Hexagon Head, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .2500-28 UNJF-3A 2006-06-27 Revised AS9285A Bolt, Machine - Hexagon Head, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .3125-24 UNJF-3A 2006-06-27 Revised AS9286A Bolt, Machine - Hexagon Head, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .3750-24 UNJF-3A 2006-06-27 Revised AS9292A Screw, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .1380-40 UNJF-3A 2006-07-06 Revised AS9294A Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .1900-32 UNJF-3A 2006-07-06 Revised AS9296A Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .3125-24 UNJF-3A 2006-07-06 Revised AS9297A Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .3750-24 UNJF-3A 2006-07-06 Revised AS93D Cones, Rear, Propeller Hub (NONCURRENT May 1995) 2006-05-31 Reaffirmed AS9303B Stud, Shouldered, Hexagon Wrenching, Steel UNS G87400, Cadmium Plated, 125 KSI Min, .1900-32 UNF-3A X .1900-32 UNF-3A 2009-02-10 Revised AS9304B Stud, Shouldered, Stepped, Hex., Wrenching, Steel UNS G87400, Cadmium Plated, 125 KSI Min, .1900- 32 UNF-3A X .2500-28 UNF-3A 2009-02-10 Revised AS9305B Stud, Shouldered, Hexagon Wrenching, Steel UNS G87400, Cadmium Plated, 125 KSI Min, .2500-28 UNF-3A X .2500-28 UNF-3A 2009-02-10 Revised AS9306B Stud, Shouldered, Stepped, Hex., Wrenching, Steel UNS G87400, Cadmium Plated, 125 KSI Min, .2500- 28 UNF-3A X .3125-24 UNF-3A 2009-02-10 Revised AS9307B Stud, Shouldered, Stepped, Hex., Wrenching, Steel UNS G87400, Cadmium Plated, 125 KSI Min, .2500- 28 UNF-3A X .3750-24 UNF-3A 2009-02-10 Revised AS9308A Stud, Shouldered, Hex Wrenching, Drilled, Steel Uns G87400, Cad, Plated, 125 Ksi Min, .1900-32 Unf-3a X.1900-32 Unf-3a 2004-12-29 Revised AS9309A Stud, Shouldered, Stepped, Hex Wrenching, Drilled, Steel Uns G87400, Cad, Plated, 125 Ksi Min, .1900-32 Unf-3a X .2500-28 Unf-3a 2004-12-29 Revised AS9310A Stud, Shouldered, Hex Wrenching, Drilled, Steel Uns G87400, Cad, Plated, 125 Ksi Min, .2500-28 Unf-3a X .2500-28 Unf-3a 2004-12-29 Revised AS9311A Stud, Shouldered, Stepped, Hex Wrenching, Drilled, Steel Uns G87400, Cad, Plated, 125 Ksi Min, .2500-28 Unf-3a X .3125-24 Unf-3a 2004-12-29 Revised AS9312A Stud, Shouldered, Stepped, Hex Wrenching, Drilled, Steel Uns G87400, Cad, Plated, 125 Ksi Min, .2500-28 Unf-3a X .3750-24 Unf-3a 2004-12-29 Revised AS9316A Screw, Machine - Hexagon Head, Slotted, Full Shank, Alloy Steel, Uns K14675, 135 Ksi Min, .1900-32 Uns-3a 2004-03-19 Revised AS9317B Screw, Machine - Hexagon Head, Slotted, Full Shank, Alloy Steel, Uns K14675, 135 Ksi Min, .2500-28 Uns-3a, Ni-Cad Plate 2005-09-27 Revised AS9318A Rivet, Solid - 100° Flush Head, Monel UNS N04400 2006-08-10 Revised AS9319A Rivet, Solid - Universal Head, Monel UNS N04400 2006-08-10 Revised AS9320 Washer, Flat - AMS 6350 2007-06-26 Reaffirmed AS9321 Washer, Flat - AMS 5510 2007-06-27 Reaffirmed AS9349 Clamp, Loop, Cushioned, Joggled, Cres, .204 Hole 2004-07-27 Reaffirmed AS9353 Clamp, Loop - Aluminum, .204 Hole 2007-06-27 Reaffirmed AS9354 Clamp, Loop - Aluminum, .265 Hole 2007-06-27 Reaffirmed AS9356B Nut, Plain, Hexagon, UNS S66286 2006-05-10 Reaffirmed AS9357A Nut, Plain, Hexagon, Silver Plated, UNS S66286 130 ksi min 2007-06-28 Reaffirmed AS9358A Nut, Plain, Castellated, Hexagon-UNS S66286, 130 ksi Min 2006-05-02 Reaffirmed AS9359A Nut, Castellated, Hexagon, Silver Plated, Cres UNS S66286, 130 ksi min 2007-02-07 Revised AS9360B Nut, Plain, Hexagon - Drilled, Silver Plated - UNS S66286, 130 ksi min 2007-06-27 Reaffirmed AS9361A Nut, Plain, Hexagon, Check, UNS S66286, 130 ksi min 2007-06-28 Reaffirmed AS9362A Nut, Plain, Hexagon, Check - UNS S66286, 130 ksi Min, Silver Plated 2006-05-10 Reaffirmed AS9363A Nut, Slotted, Hexagon, Shear - UNS S66286, 130 ksi min 2006-05-10 Reaffirmed AS9364A Nut, Slotted, Hexagon, Shear - Silver Plated, UNS S66286, 130 ksi min 2006-05-10 Reaffirmed AS9371B Gasket - Metal O-Ring, .035 Tube X .006 Wall, Silver Plated, Cres - Uns S32100 2004-07-28 Revised AS9372B Gasket - Metal O-Ring, .062 Tube X .006 Wall, Silver Plated Cres - Uns S32100 2004-07-28 Revised AS9373B Gasket - Metal O-Ring, .062 Tube X .010 Wall Silver Plated Cres - Uns S32100 2004-07-28 Revised AS9374B Gasket - Metal O-Ring, .094 Tube X .006 Wall, Silver Plated Cres - Uns S32100 2004-07-28 Revised AS9375B Gasket - Metal O-Ring, .094 Tube X .010 Wall, Silver Plated Cres - Uns S32100 2004-07-28 Revised AS9376B Gasket - Metal O-Ring, .125 Tube X .010 Wall, Silver Plated Cres - Uns S32100 2004-07-28 Revised AS9379 Plug, Expansion - AMS 5510 2007-06-27 Reaffirmed AS9380 Plug, Expansion - AMS 4003 2007-06-27 Reaffirmed AS9385 Packing, Performed, Ams 7267, O-Ring 2004-07-27 Reaffirmed AS9386 Packing, Preformed, Ams 7267, O-Ring 2004-07-27 Reaffirmed AS9389 Pin, Straight, Headless - AMS 5735, Lock 2007-06-27 Reaffirmed AS9390B Pin, Straight, Headless, Dowel - Cres, UNS S66286, Standard and Oversize 2007-06-28 Reaffirmed AS9392 Cushion, Loop Clamp - Multiple, 3-Tube, AMS 3303 2007-06-27 Reaffirmed AS9393 Cushion, Loop Clamp - Multiple, 2-Tube, AMS 3303 2007-06-27 Reaffirmed AS9394 Strap, Retaining-Multiple Tube, Detachable Cushion, AMS 5510 2007-06-27 Reaffirmed AS9395 Backplate, Retaining Strap AMS 5510 2007-06-27 Reaffirmed AS9397A Bolt, Tee Head - Cadmium Plated, Steel, UNS G87400, 125 ksi min, Chamfered, .1900-32 UNJF-3A 2007-06-28 Reaffirmed AS9398B Bolt, Tee Head, Chamfered - Cadmium Plated, Steel, UNS G87400, 125 ksi min, .2500-28 UNJF-3A 2007-06-28 Reaffirmed AS9399A Bolt, Tee Head - Cadmium Plated, Steel, UMS G87400, 125 ksi min, Chamfered, .3125-24 UNJF-3A 2007-06-27 Reaffirmed AS94B Snap Ring, Non-Controllable Propeller Hub (UNS G87400) (NONCURRENT Aug 1973) 2008-08-26 Revised AS9400A Bolt, Tee Head - Cadmium Plated, Steel, UNS G87400, 125 ksi min, Chamfered, .3750-24 UNJF-3A 2007-06-27 Reaffirmed AS9401A Bolt, Tee Head - Cadmium Plated, Steel, Uns G87400, 125 Ksi Min, Chamfered, .4375-20 Unjf-3a 2003-06-05 Revised AS9402A Bolt, Tee Head - Cadmium Plated, Steel, UNS G87400, 125 ksi min, Chamfered, .5000-20 UNJF-3A 2007-06-27 Reaffirmed AS9403 Rivet, Solid - Universal Head, Ams 5737 2004-07-27 Reaffirmed AS9432B Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .1900-32 UNJF-3A 2007-06-27 Reaffirmed AS9433B Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .2500-28 UNJF-3A 2007-06-27 Reaffirmed AS9434B Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .3125-24 UNJF-3A 2007-06-27 Reaffirmed AS9440A Bolt, Machine-Hexagon, Drilled, 6 Holes, PD Shank, Nickel Cadmium Plated, Steel UNS K14675, 195 ksi min., 1900-32 UNJF-3A 2006-03-29 Revised AS9441A Bolt, Machine - Hexagon, Drilled, 6 Holes, Pd Shank, Nickel Cadmium Plated, Steel Uns K14675, 195 Ksi Min,.2500-28 Unjf-3a 2006-03-29 Revised AS9442B Bolt, Machine - Hexagon, Drilled, 6 Holes, PD Shank, Nickel Cadmium Plated, Steel UNS K14675, 195 ksi min, .3125-24 UNJF-3A 2008-10-06 Revised AS9444A Bolt, Machine - Hexagon, Drilled, 6 Holes, Pd Shank, Nickel Cadmium Plated, Steel Uns K14675, 195 Ksi Min,.4375-20 Unfj-3a 2006-03-29 Revised AS9449B Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head UNS K14675, 195 ksi Min, .1380-40 UNJF-3A 2009-06-08 Revised AS9450A Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, UNS K14675, 195 ksi Min, .1640-36 UNJF-3A 2006-05-02 Reaffirmed AS9451B Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .1900-32 UNJF-3A 2007-06-28 Reaffirmed AS9452B Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .2500-28 UNJF-3A 2007-06-28 Reaffirmed AS9453B Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .3125-24 UNJF-3A 2007-06-28 Reaffirmed AS9454B Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .3750-24 UNJF-3A 2007-06-28 Reaffirmed AS9455B Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .4375-20 UNJF-3A 2007-06-28 Reaffirmed AS9456B Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .5000-20 UNJF-3A 2007-06-28 Reaffirmed AS9457B Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .5625-18 UNJF-3A 2007-06-28 Reaffirmed AS9458B Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .6250-18 UNJF-3A 2007-06-28 Reaffirmed AS9459A Bolt, Machine - Steel, AMS 6304, Diffused Nickel-Cadmium Plated Hexagon Head, .750-16 UNJF-3A 2007-06-28 Reaffirmed AS9460 Rivet, Solid - 100Md Flush Head, Ams 7235 2004-07-27 Reaffirmed AS9462A Pin, Straight, Headed, .124 Diameter, Cres, UNS S66286 2007-06-28 Reaffirmed AS9463A Pin, Straight, Headed, .186 Diameter, Cres, UNS S66286 2007-06-28 Reaffirmed AS9464C Pin, Straight, Headed, .248 Diameter, Cres, Uns S66286 2005-03-24 Revised AS9465A Pin, Straight, Headed, .311 Diameter, Cres, UNS S66286 2007-06-28 Reaffirmed AS9466A Pin, Straight, Headed, .373 Diameter, Cres, UNS S66286 2007-06-28 Reaffirmed AS9467A Pin, Straight, Headed, .436 Diameter, Cres, UNS S66286 2007-06-28 Reaffirmed AS9468 Pin, Straight, Headed .497 Diameter, Ams 5735 2004-07-27 Reaffirmed AS9482 Washer, Flat - Steel AMS 6437 or AMS 6485, Diffused Nickel-Cadmium Plated, Countersunk 2007-06-27 Reaffirmed AS9486 Pin, Straight, Headless - Ams 5132, Lock 2004-07-27 Reaffirmed AS9489A Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .190-32 Unjf-3a 2004-06-29 Revised AS9490A Bolt, Machine-Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .250-28 Unjf-3a 2004-06-29 Revised AS9491A Bolt, Machine-Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .3125-24 Unjf-3a 2004-06-29 Revised AS9492A Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .375-24 Unjf-3a 2004-06-29 Revised AS9493A Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .4375-20 Unjf-3a 2004-06-29 Revised AS9494A Bolt, Machine-Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .500-20 Unjf-3a 2004-06-29 Revised AS9496A Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .625-18 Unjf-3a 2004-06-29 Revised AS9500A Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, UNS S66286, 130 ksi min, .1900-32 UNJF-3A 2007-06-27 Reaffirmed AS9501A Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, UNS S66286, 130 ksi min, .2500-28 UNJF-3A 2007-06-27 Reaffirmed AS9502A Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, UNS S66286, 130 ksi min, .3125-24 UNJF-3A 2007-06-27 Reaffirmed AS9503A Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, UNS S66286, 130 ksi min, .3750-24 UNJF-3A 2007-06-27 Reaffirmed AS9505A Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, UNS S66286, 130 ksi min, .5000-20 UNJF-3A 2007-06-27 Reaffirmed AS9516A Screw, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi Min, .1380-40 UNJF-3A 2006-05-02 Reaffirmed AS9517A Screw, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi Min, .1640-36 UNJF-3A 2006-05-02 Reaffirmed AS9518B Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .1900-32 UNJF-3A 2007-09-24 Revised AS9519B Bolt, Machine - Hexagon Head, Steel, Cadmium Plated, UNS G87400, 125 ksi min, .2500-28 UNJF-3A 2007-07-05 Revised AS9520B Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .3125-24 UNJF-3A 2007-09-24 Revised AS9521B Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .3750-24 UNJF-3A 2007-09-24 Revised AS9522B Bolt, Machine - Hexagon Head, Steel, Cadmium Plated, UNS G87400, 125 ksi min, .4375-20 UNJF-3A 2007-07-05 Revised AS9523B Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .5000-20 UNJF-3A 2007-09-24 Revised AS9524B Bolt, Machine - Hexagon Head, Steel, Cadmium Plated, UNS G87400, 125 ksi min, .5625-18 UNJF-3A 2007-09-24 Revised AS9525B Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .6250-18 UNJF-3A 2007-09-24 Revised AS9526B Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .7500-16 UNJF-3A 2007-09-24 Revised AS9527A Screw, Machine Steel UNS G87400, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .1380-40 UNJF-3A 2007-09-24 Revised AS9528A Screw, Machine Steel UNS G87400, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .1640-36 UNJF-3A 2007-09-24 Revised AS9529A Bolt, Machine - Steel UNS G87400, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .1900-32 UNJF-3A 2007-09-24 Revised AS9530A Bolt, Machine - Hexagon Head, Drilled 1 Hole, Cadmium Plated, Steel UNS G87400, 125 ksi min, .2500-28 UNJF-3A 2007-11-20 Revised AS9531A Bolt, Machine - Hexagon Head, Drilled 1 Hole, Cadmium Plated, Steel UNS G87400, 125 ksi min, .3125-24 UNJF-3A 2007-11-20 Revised AS9532A Bolt, Machine - Hexagon Head, Drilled 1 Hole, Cadmium Plated, Steel UNS G87400, 125 ksi min, .3750-24 UNJF-3A 2007-11-20 Revised AS9533A Bolt, Machine - Hexagon Head, Drilled 1 Hole, Cadmium Plated, Steel UNS G87400, 125 ksi min, .4375-20 UNJF-3A 2007-11-20 Revised AS9534A Bolt, Machine - Hexagon Head, Drilled 1 Hole, Cadmium Plated, Steel UNS G87400, 125 ksi min, .5000-20 UNJF-3A 2007-11-29 Revised AS9549 Washer, Flat - AMS 5510 2006-05-10 Reaffirmed AS9551A Bracket, Flat, Steel, Uns G41300, Cadmium Plated 2005-12-29 Revised AS9552B Bracket, Flat, Cres UNS S32100 2009-10-01 Revised AS9553A Nut - Hexagon, Boss Connection, Cres - UNS S30400, 75 ksi 2007-06-26 Reaffirmed AS9554B Screw, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1380-40 UNJF-3A 2006-05-17 Revised AS9555B Screw, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1640-36 UNJF-3A 2006-05-17 Revised AS9556C Bolt, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1900-32 UNJF-3A 2007-07-05 Revised AS9557C Bolt, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .2500-28 UNJF-3A 2007-07-05 Revised AS9558B Bolt, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .3125-24 UNJF-3A 2006-05-17 Revised AS9559B Bolt, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .3750-24 UNJF-3A 2006-05-17 Revised AS9564A Screw, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres Uns S66286, 130 Ksi Min .1640-36 Unfj-3a 2005-04-15 Revised AS9565C Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres UNS S66286, 130 ksi Min .1900-32 UNJF-3A 2007-04-09 Revised AS9566A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres Uns S66286, 130 Ksi Min .2500-28 Unjf-3a 2005-04-15 Revised AS9567B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, 130 Ksi Min, .3125-24 Unfj-3a 2005-07-18 Revised AS9568D Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres UNS S66286, 130 ksi min .3750-24 UNJF-3A 2006-05-04 Revised AS9572A Screw, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1380-40 UNJF-3A 2007-06-28 Reaffirmed AS9573A Screw, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1640-36 UNJF-3A 2007-06-28 Reaffirmed AS9574A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1900-32 UNJF-3A 2007-06-28 Reaffirmed AS9575B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .2500-28 UNJF-3A 2007-07-05 Revised AS9576B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosioin and Heat Resistant Steel, UNS S66286, 130 ksi min, .3125-24 UNJF-3A 2007-07-05 Revised AS9577 Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, .375-24 Unjf-3a 2004-07-27 Reaffirmed AS9579A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .5000-20 UNJF-3A 2007-06-28 Reaffirmed AS9581A Washer, Key - 90 Deg. Locking, Cres, UNS S32100 2007-06-28 Reaffirmed AS9582A Washer, Key - 270 Deg. Locking, Cres, UNS S32100 2007-06-28 Reaffirmed AS9583A Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .1900-32 UNJF-3A 2007-06-28 Reaffirmed AS9584A Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .2500-28 UNJF-3A 2007-06-28 Reaffirmed AS9585A Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .3125-24 UNJF-3A 2007-06-28 Reaffirmed AS9586B Bolt, Machine-Hexagon Drilled, 6 Holes, Full Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .3750-24 Unjf-3a 2004-05-21 Revised AS9587A Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .4375-20 UNJF-3A 2007-06-28 Reaffirmed AS9588A Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .5000-20 UNJF-3A 2007-06-28 Reaffirmed AS9589 Bolt, Machine-Hexagon Head, Drilled, 6 Holes, Full Shank, .5625-18 UNJF-3A 2006-05-10 Reaffirmed AS9592B Bracket, Angle, 90°, Cres UNS S32100, .190 Bolt 2007-07-16 Revised AS9593B Bracket, Angle, 90°, Cres UNS S32100, .190 X .250 Bolt 2009-11-06 Revised AS9594A Bracket, Angle 90Md, Cres Uns S 32100,.190 X .312 Bolt 2005-12-29 Revised AS9595A Bracket, Angle 90Md, Cres Uns S32100, .190 X .375 Bolt 2005-12-29 Revised AS9596A Bracket, Angle, 90Md, Cadmium Plates, Steel Uns G41300, .190 Bolt 2005-12-29 Revised AS9597A Bracket, Angle, 90Md, Cadmium Plated, Steel Uns G41300, .190 X .250 Bolt 2005-12-29 Revised AS9598A Bracket, Angle, 90Md, Cadmium Plated, Alloy Steel Uns G41300, .190 X .312 Bolt 2005-03-24 Revised AS9599A Bracket, Angle, 90Md, Cadmium Plated, Alloy Steel Uns G41300, .190 X .375 Bolt 2005-03-24 Revised AS9600A Bracket, Angle, 90Md, Corrosion and Heat Resistant Steel Uns S41000, .190 Bolt 2005-03-24 Revised AS9601A Bracket, Angle, 90Md, Cres Uns S41000, .190 X .250 Bolt 2005-12-30 Revised AS9602A Bracket, Angle, 90Md, Cres Uns S41000, .190 X .312 Bolt 2005-12-30 Revised AS9603A Bracket, Angle, 90Md, Cres Uns S41000, .190 X .375 Bolt 2005-12-30 Revised AS9631 Screw, Machine-Hexagon Head, Pd Shank, Titanium Ams 4967, .138-40 Unjf-3a 2005-05-03 Reaffirmed AS9633 Bolt, Machine - Hexagon Head, PD Shank, Titanium AMS 4967, .190-32 UNJF-3A 2007-06-27 Reaffirmed AS9638 Bolt, Machine - Hexagon Head, PD Shank, Titanium AMS 4967, .500-20 UNJF-3A 2007-06-27 Reaffirmed AS9676A Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cup Washer Locked, Cres, UNS S66286, 130 ksi min, .1900-32 UNJF-3A 2007-06-27 Reaffirmed AS9677A Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cup Washer Locked, Cres, UNS S66286, 130 ksi min, .2500-28 UNJF-3A 2007-06-27 Reaffirmed AS9678A Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cup Washer Locked, Cres, UNS S66286, 130 ksi min, .3125-24 UNJF-3A 2007-06-27 Reaffirmed AS9679A Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cup Washer Locked, Cres, UNS S66286, 130 ksi min, .3750-24 UNJF-3A 2007-06-27 Reaffirmed AS9680A Bolt, Machine - Double Hex, Extended Washer Hd, Pd Shank, Cup Washer Locked, Cadmium Plated, Steel, Uns G87400, 125 Ksi Min, .1900-32 Unjf-3a 2004-05-21 Revised AS9681A Bolt, Machine - Double Hex, Extended Washer Hd, Pd Shank, Cup Washer Locked, Cadmium Plated, Steel, Uns G87400, 125 Ksi Min, .2500-28 Unjf-3a 2004-05-21 Revised AS9685A Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, Steel, UNS K14675, Diffused Nickel-Cadmium Plate, 195 ksi min, .1900-32 UNJF-3A 2007-06-27 Reaffirmed AS9686A Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, Steel, UNS K14675, Diffused Nickel-Cadmium Plate, 195 ksi min, .2500-28 UNJF-3A 2007-06-27 Reaffirmed AS9687A Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, Steel, UNS K14675, Diffused Nickel-Cadmium Plate, 195 ksi min, .3125-24 UNJF-3A 2007-06-27 Reaffirmed AS9696B Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Corrosion and Heat Resistant Steel, UNS N07001, 165 ksi min, .1900-32 UNJF-3A 2005-07-28 Revised AS9697C Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Corrosion and Heat Resistant Steel, UNS N07001, 165 ksi min, .2500-28 UNJF-3A 2006-05-18 Revised AS9698B Bolt, Machine - Double Hexagon, Extended Washer Head, PD Shank, Corrosion and Heat Resistant Steel, UNS N07001, 165 ksi min, .3125-24 UNJF-3A 2007-07-05 Revised AS9699A Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Corrosion and Heat Resistant Steel, UNS N07001, 165 ksi min, .3750-24 UNJF-3A 2007-06-27 Reaffirmed AS9705A Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel, .190-32 UNJF-3A 2009-10-26 Revised AS9712 Screw, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion & Heat Resistant Steel, .138-40 Unjf-3a 2005-05-03 Reaffirmed AS9714 Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel, .190-32 Unjf- 3a 2005-05-03 Reaffirmed AS9715A Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel, .2500-28 UNJF-3A 2007-07-05 Revised AS9716A Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel, .3125-24 UNJF-3A 2007-07-05 Revised AS9724B Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Corrosion and Heat Resistant Steel, UNS N07001, .2500-28 UNJF-3A 2007-06-28 Reaffirmed AS9732 Bolt, Machine-Double Hexagon Extended Washer Head, Pd Shank, Cres Ams 5643, .190-32 Unjf-3a 2005-05-03 Reaffirmed AS9733 Bolt, Machine-Double Hexagon, Extended Washer Head, Pd Shank, Cres Ams 5643, .250-28 Unjf-3a 2005-05-03 Reaffirmed AS9741B Bolt, Machine - Double Hexagon, Extended Washer Head, Drilled, Pd Shank, Cres Uns S17400, Ksi Min 1900-32 Unjf-3a 2005-11-08 Revised AS9742A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres UNS S17400, 140 ksi min .2500-28 UNJF-3A 2005-08-18 Revised AS9750 Bolt, Machine-Double Hexagon Extended Washer Head, Pd Shank, Titanium Ams 4967, .190-32 Unjf-3a 2005-05-03 Reaffirmed AS9751 Bolt, Machine-Double Hexagon Extended Washer Head, Pd Shank, Titanium Ams 4967, .250-28 Unjf-3a 2005-05-03 Reaffirmed AS9759 Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium Ams 4967, .190-32 Unjf-3a 2005-05-03 Reaffirmed AS976 Coupling - Clamp, Groove V-Band, 6.400, 9.400, 11.400 Flange OD 2006-10-10 Reaffirmed AS9760 Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium Ams 4967, .250-28 Unjf-3a 2005-05-03 Reaffirmed AS9761 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium Ams 4967, .3125-24 Unjf-3a 2005-05-03 Reaffirmed AS977 Coupling - Clamp, Groove V-Band, Forged, 6.400, 9.400, 11.400 Flange OD 2006-10-10 Reaffirmed AS9770 Packing, Preformed - Ams 3650, `O Ring 2005-05-03 Reaffirmed AS9783 Bolt, Machine - Hexagon Head, Full Shank, Ams 5643, .190-32 Unjf-3a 2005-05-03 Reaffirmed AS9784 Bolt, Machine - Hexagon Head, Full Shank, Ams 5643, .250-28 Unjf-3a 2005-05-03 Reaffirmed AS9785 Bolt, Machine - Hexagon Head, Full Shank, Ams 5643, .3125-24 Unjf-3a 2005-05-03 Reaffirmed AS9786 Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .375-24 UNJF-3A 2006-05-10 Reaffirmed AS9788 Bolt, Machine - Hexagon Head, Full Shank, Ams 5643, .500-20 Unjf-3a 2005-05-04 Reaffirmed AS9790 Bolt, Machine - Hexagon Head, Full Shank, Ams 5643, .625-18 Unjf-3a 2005-05-03 Reaffirmed AS9805 Bolt, Machine-Hexagon Head, PD Shank, AMS 5643, .190-32 UNJF-3A 2007-06-26 Reaffirmed AS9806 Bolt, Machine - Hexagon Head, PD Shank, AMS 5643, .250-28 UNJF-3A 2007-06-26 Reaffirmed AS9808 Bolt, Machine-Hexagon Head, PD Shank, AMS 5643, .375-24 UNJF-3A 2007-06-26 Reaffirmed AS9816 Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, AMS 5643, .190-32 UNJF-3A 2007-06-26 Reaffirmed AS9821 Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, AMS 5643, .500-20 UNJF-3A 2007-06-27 Reaffirmed AS9841 Key, Woodruff - Chamfered Cres Ams 5640 2005-05-03 Reaffirmed AS9842A Pin, Straight, Headed, .0937 Diameter, Uns S41800 2004-09-30 Revised AS9843A Pin, Straight, Headed, .1249 Diameter, Uns S41800 2004-09-30 Revised AS9844A Pin, Straight, Headed, .1874 Diameter, Uns S41800 2004-09-30 Revised AS9845A Pin, Straight, Headed, .2499 Diameter, Uns S41800 2004-09-30 Revised AS9846A Pin, Straight, Headed, .3124 Diameter, Uns S41800 2004-09-30 Revised AS9847A Pin, Straight, Headed, .3749 Diameter, Uns S41800 2004-09-30 Revised AS9848A Pin, Straight, Headed, .4999 Diameter, Uns S41800 2004-09-30 Revised AS9880 Washer, Cup, Lock - Cres Ams 5510 2005-05-03 Reaffirmed AS9881A Nut, Plain, Hexagon, Cadmium Plated, UNS G87400, 125 ksi Min 2006-05-02 Reaffirmed AS9882A Nut, Plain, Hexagon - Drilled, Cadmium Plated - UNS G87400, 125 ksi Min 2006-05-02 Reaffirmed AS9885A Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Corrosion and Heat Resistant Steel, Uns S41800, 140 Ksi Min, .1900-32 Unjf-3a 2005-04-15 Revised AS9887 Bolt, Machine-Double Hexagon Extended Washer Head, Ams 5616, .3125-24 Unjf-3a 2005-05-03 Reaffirmed AS9890A Bolt, Machine - Double Hexagon Extended Washer Head, Cres UNS S41800, .5000-20 UNJF-3A 2007-07-05 Revised AS9894 Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Ams 5616, .190-32 Unjf-3a 2005-05-03 Reaffirmed AS9895A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, AMS 5616, .2500-28 UNJF-3A 2007-10-02 Revised AS9902C Plug, Machine Thread Drilled, Preformed Packing, AS8879 Thread (UNS S34700) 2009-09-29 Revised AS9914 Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Steel Ams 6322, Cadmium Plated, .190-32 Unjf-3a 2005-05-03 Reaffirmed AS9916 Bolt, Machine - Doubld Hexagon Extended Washer Head, Pd Shank, Steel Ams 6322, Cadmium Plated .3125-24 Unjf-3a 2003-10-16 Reaffirmed AS9917 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .375-24 UNJF-3A 2007-06-27 Reaffirmed AS9918 Bolt, Machine-Double Hexagon Extended Washer Head, Pd Shank, Steel Ams 6322, Cadmium Plated, .4375-20 Unjf-3a 2005-05-03 Reaffirmed AS9923A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cadmium Plated, Steel, UNS G87400, 125 ksi min, .1900-32 UNJF-3A 2007-06-27 Reaffirmed AS9924A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cadmium Plated, Steel, UNS G87400, 125 ksi min, .2500-28 UNJF-3A 2007-06-27 Reaffirmed AS9928A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cadmium Plated, Steel, UNS G87400, 125 ksi min, .5000-20 UNJF-3A 2007-06-27 Reaffirmed AS9933 Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel Ams 6322, Cadmium Plated, .250-28 Unjf-3a 2003-10-16 Reaffirmed AS9944 Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Full Shank, Steel Ams 6322, Cadmium Plated, .375-24 Unjf-3a 2005-05-04 Reaffirmed AS9947 Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS 6322, Cadmium Plated, .5625-18 UNJF-3A 2007-06-27 Reaffirmed AS9955 Packing, Preformed - AMS 3668, "O" Ring 2007-06-27 Reaffirmed AS9956A Packing, Preformed (PTFE) - AMS3668, Seal 2008-08-11 Revised AS9958 Bolt, Machine, Hexagon Head, Drilled, 6 Hold, Pd Shank, Steel Ams 6322, Cadmium Plated, .250-28 Unjf-3a 2005-05-04 Reaffirmed AS9964 Bolt, Machine, Hexagon Head, Drilled, 6 Hole Pd Shank, Steel Ams 6322, Cadmium Plated, .625-18 Unjf-3a 2005-05-04 Reaffirmed AS9966 Packing, Preformed - AMS 7273, Seal 2007-06-27 Reaffirmed AS9967 Packing, Preformed - AMS 7273, "O" Ring 2007-06-27 Reaffirmed MA1370 Screw Threads - MJ Profile, Metric 2006-05-08 Reaffirmed MA1421 Aerospace Selected Diameter-Pitch Combinations of Metric 60° Screw Threads for Shaft or Bearing Retaining Screw Threads 2006-05-08 Reaffirmed MA1508 Undercuts for Straight Screw Threads - Metric 2006-05-08 Reaffirmed MA1518B Bolts, Screws and Nuts - External Wrenching, Metric Threads - Design Parameters For 2004-02-05 Reaffirmed MA1520A Areas for Calculating Stress or Load Values for Metric MJ Externally Threaded Fasteners 2006-05-03 Reaffirmed MA1549 Wrenching Configuration, 12 Spline, For Metric Threaded Fasteners 2006-10-10 Reaffirmed MA1565B Inserts, Screw Thread, Helical Coil Metric Series, Procurement Specification for 2009-03-11 Revised MA1566A Gaging Practice and Gage Requirements for MJ Metric Screw Threads 2006-05-10 Reaffirmed MA1567B Insert, Screw Thread, Helical Coil, Metric Series, Standard Assembly Dimensions For 2006-05-08 Reaffirmed MA1568 Nut, Self Locking - UNS S66286, 425 °C & 650 °C, 1100 MPa, MJ Thread, Procurement Specification For, Metric 2006-05-08 Reaffirmed MA1573 Nut, Self-Locking, Steel, Class 1100 Mpa/235 Degrees C, Mj Thread Procurement Specification For, Metric 2004-07-23 Reaffirmed MA1696A Screw Threads, Metric Buttress - MJB Profile 2006-05-03 Reaffirmed MA1759A Center Hole, Metric 2006-05-08 Reaffirmed MA1784 Spacers and Washers, Procurement Specification For, Metric 2006-05-08 Reaffirmed MA1806 Spring Clips and Cushion Selection for Metal Tube Support, Metric 2006-05-08 Reaffirmed MA1937 Nut, Hex, Free Running, Procurement Specification For, Metric 2006-05-08 Reaffirmed MA1943A Nuts, Self-Locking, UNS N07001, 760 °C, 1100 MPa and 1210 MPa, Procurement Specification For, Metric 2006-05-08 Reaffirmed MA2010 Packing, Preformed - O-Ring Seal, Standard Sizes & Size Codes, Metric 2006-05-08 Reaffirmed MA2039A Plug, Port - MJ Thread, O-Ring Seal, AMS-5640, Metric 2006-10-10 Reaffirmed MA2093 Fitting End, Dimensions, Fluid Systems Port Connection, Metric 2004-07-23 Reaffirmed MA2515 Ring - Back-Up, Port Connection, AMS 3660, Metric 2006-10-11 Reaffirmed MA2520 Nut - Hex, Back-Up Ring, Port Fitting Connector, AMS 5639, MJ Thread, Metric 2006-10-11 Reaffirmed MA2521 Nut - Hex, Port Fitting Connector, AMS 5639, MJ Thread, Metric 2006-10-11 Reaffirmed MA2532 Adapter - Port to Tube, 60 Deg Cone Coupling, AMS 5639, MJ Thread, Metric 2006-10-11 Reaffirmed MA2536 Gasket, Metal C-Ring, Face Seal, Internal Pressure, UNS N07750 Silver Plated, Metric 2006-10-11 Reaffirmed MA2537 Groove Design, Metal C-Ring Gasket, Face Type Internal Pressure, Metric 2006-05-08 Reaffirmed MA2538 Gasket, Metal C-Ring Seal Nickel Alloy, Corrosion and Heat Resistant, Metric Procurement Specification For 2004-07-23 Reaffirmed MA3259A Pin, Cotter - Cres, Uns S32100, As7211 Metric Series 2004-06-29 Revised MA3265 Washer - Flat Load Spreading, Metric, AMS 5525 2006-10-10 Reaffirmed MA3266 Nut, Self-Locking - Spline Drive, Extended Washer UNS S66286, Silver Plate, MJ Thread, Metric 2006-10-11 Reaffirmed MA3274 Nut - Self-Locking, Clinch, Serrated Shank, 400 Degrees C, Dry Film Coated, Uns S66286, Mj Thread, Metric 2004-07-23 Reaffirmed MA3275 Nut - Self-Locking, Clinch, Serrated Shank, 650 Degrees C, Silver Plated, Uns S66286, Mj Thread, Metric 2004-07-23 Reaffirmed MA3279B Insert, Screw Thread, Helical Coil, Metric Series, Free Running, Cres, Uncoated 2006-05-02 Reaffirmed MA3280B Insert, Screw Thread, Helical Coil, Metric Series, Free Running, Cres, Dry Film Lubricated 2006-05-02 Reaffirmed MA3281B Insert, Screw Thread, Helical Coil, Metric Series, Free Running, Cres, Cadmium Plated 2006-05-02 Reaffirmed MA3286B Bolt, Machine-Hexagon Head, Pd Shank, Mj Thread, Corrosion and Heat Resistant Steel, Uns S66286, 90 Mpa Min, Metric 2004-12-09 Revised MA3287 Bolt, Machine - Spline Extended Washer, PD Shank Long Thread, AMS5731, Metric 2006-05-02 Reaffirmed MA3288 Nut, Plain Hex - UNS S66286, MJ Thread, Metric 2006-10-10 Reaffirmed MA3289B Bolt, Machine-Hex Head-PD Shank MJ Thread, AMS6322, Cadmium Plate, Metric 2009-06-29 Revised MA3294 Clip - Spring, Tension, Outer 5.5 mm Bolt Hole, AMS 5525, Metric 2006-10-11 Reaffirmed MA3295 Clip - Spring, Tension, Inner 5.5 mm Bolt Hole, AMS 5525, Metric 2006-10-11 Reaffirmed MA3296 Cushion - Tube Clamp Support, PTFE, Metric 2006-10-11 Reaffirmed MA3302A Nut, Plain Hex - UNS G87400, Cadmium Plate, MJ Thread, Metric (NONCURRENT Nov 1996) 2006-05-11 Reaffirmed MA3304A Bolt - Machine, Hex Head, Drilled, PD Shank, MJ Thread, AMS 6322, Cadmium Plate, Metric (NONCURRENT Nov 1996) 2006-05-11 Reaffirmed MA3329C Insert, Screw Thread, Helical Coil, Metric Series, Screw Locking, Cres, Uncoated 2006-10-11 Reaffirmed MA3330C Insert, Screw Thread, Helical Coil, Metric Series, Screw Locking, Cres, Dry Film Lubricated 2006-10-11 Reaffirmed MA3331C Insert, Screw Thread, Helical Coil, Metric Series, Screw Locking, Cres, Cadmium Plated 2006-10-11 Reaffirmed MA3338 Bolt, Machine-Hex Head, Pd Shank, Long Thread, Ams 5662, Metric 2004-07-23 Reaffirmed MA3339B Bolt, Machine-Spline Extended Washer, PD Shank, Long Thread, AMS6322, Cadmium Plated, Metric 2009-06-29 Revised MA3340B Bolt, Machine-Spline Extended Washer, PD Shank, Long Thread, AMS 5662, Metric 2006-08-14 Reaffirmed MA3341 Bolt, Machine-Spline Extended Washer, Full Shank, Long Thread, AMS 5731, Metric 2006-08-14 Reaffirmed MA3342 Bolt, Machine-Spline Extended Washer, Full Shank, Drilled, Long Thread, AMS5731, Metric 2006-05-02 Reaffirmed MA3343 Bolt, Machine - Spline Drive Extended Washer, Full Shank, Long Thread, AMS 5662, Metric 2006-05-02 Reaffirmed MA3344 Nut, Plain Hex - Thin, UNS S66286, MJ Thread, Metric 2006-05-05 Reaffirmed MA3347 Bolt, Machine-Hex Head-Full Shank, Long Thread, AMS 5731, Metric 2006-05-02 Reaffirmed MA3348 Bolt, Spline Drive Extended Washer Head, PD Shank, Long Thread, AMS 5708, Metric 2006-05-02 Reaffirmed MA3349 Nut, Self Locking - Reduced Hex Drive, UNS S66286, Silver Plate, MJ Thread, Metric 2007-06-27 Reaffirmed MA3350 Nut, Castellated, Hex - UNS S66286, MJ Thread, Metric 2006-05-05 Reaffirmed MA3351 Nut, Spline Drive - Extended Washer, Cupwasher Lock, Uns S66286, Silver Plate, Mj Thread, Metric 2004-07-30 Reaffirmed MA3352 Packing, Preformed - O-Ring Seal, AMS 7276, Metric 2006-08-14 Reaffirmed MA3353A Nut, Self Locking - Spline Drive, Extended Washer, UNS G87400, Cadmium Plate, MJ Thread, Metric 2006-05-30 Reaffirmed MA3354A Nut, Plain Hex - Thin, UNS G87400, Cadmium Plate, MJ Thread, Metric 2006-05-30 Reaffirmed MA3365 Bolt, Machine - Hex Head, Drilled, Full Shank, Long Thread, AMS 5731, Metric 2006-05-02 Reaffirmed MA3366 Bolt, Machine - Spline Drive Extended Washer, Drilled Head, Full Shank, Long Thread, AMS 5662, Metric 2006-05-02 Reaffirmed MA3367B Bolt, Machine-Spline Drive Head, Drilled, PD Shank-Long Thread, AMS6322, Cadmium Plated, Metric 2009-06-29 Revised MA3368 Bolt, Machine-Spline Extended Washer, PD Shank, Long Thread, Drilled, AMS5662, Metric 2006-05-02 Reaffirmed MA3369 Bolt, Machine-Hex Head, Drilled, PD Shank, Long Thread, AMS 5662, Metric 2006-05-02 Reaffirmed MA3371 Bolt, Spline Drive Extended Washer Head, Drilled, PD Shank, Long Thread, AMS 5708, Metric 2006-05-02 Reaffirmed MA3374A Bolts and Screws, UNS S66286, Corrosion and Heat Resistant Steel, Procurement Specification, Metric 2006-05-08 Reaffirmed MA3375B Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specification, Metric 2006-05-09 Reaffirmed MA3376B Bolts and Screws, UNS G87400 Tensile Strength 860 MPa & 1000 MPa Procurement Specification, Metric 2006-05-09 Reaffirmed MA3377B Bolts and Screws, Nickel Alloy UNS N07718, Tensile Strength 1275 MPa Procurement Specification, Metric 2008-11-06 Revised MA3378C Bolts and Screws, UNS N07001, Tensile Strength 1210 MPa, Thread and Fillet Radius Rolled Before Aging, Procurement Specification, Metric 2006-05-09 Reaffirmed MA3379 Stud, Straight, 2.5 Dia Engagement, A286, Mj Metric, 6 X 1 - 6 X 1 2004-07-23 Reaffirmed MA3380 Stud, Straight, 2.5 Dia Engagement, A286, Mj Metric, 7 X 1 - 7 X 1 2004-07-23 Reaffirmed MA3381 Stud, Straight - 2.5 Dia Engagement, A286, MJ Metric, 8 X 1 - 8 X 1 2006-05-05 Reaffirmed MA3382 Stud, Straight, 2.5 Dia Engagement, A286, Mj Metric, 10 X 1.25 - 10 X 1.25 2004-07-23 Reaffirmed MA3383 Stud, Stepped, 1.5 Dia Engagement, A286, Mj Metric, 6 X 1 - 5 X 0.8 2004-07-23 Reaffirmed MA3384 Stud, Stepped, 1.5 Dia Engagement, A286, Mj Metric, 7 X 1 - 6 X 1 2004-07-23 Reaffirmed MA3385 Stud, Stepped, 1.5 Dia Engagement, A286, Mj Metric, 8 X 1 - 7 X 1 2004-07-23 Reaffirmed MA3386 Stud, Stepped, 1.5 Dia Engagement, A286, Mj Metric, 10 X 1.25 - 8 X 2004-07-23 Reaffirmed MA3387 Stud, Stepped, 1.5 Dia Engagement, A286, Mj Metric, 12 X 1.25 - 10 X 1.25 2004-07-23 Reaffirmed MA3388 Stud, Stepped, 2.0 Dia Engagement, A286, Mj Metric, 6 X 1 - 5 X 0.8 2004-07-23 Reaffirmed MA3389 Stud, Stepped, 2.0 Dia Engagement, A286, Mj Metric, 7 X 1 - 6 X 1 2004-07-23 Reaffirmed MA3390 Stud, Stepped, 2.0 Dia Engagement, A286, Mj Metric, 8 X 1 - 7 X 1 2004-07-23 Reaffirmed MA3391 Stud, Stepped, 2.0 Dia Engagement, A286, Mj Metric, 10 X 1.25 - 8 X 2004-07-23 Reaffirmed MA3392 Stud, Stepped, 2.0 Dia Engagement, A286, Mj Metric, 12 X 1.25 - 10 X 1.25 2004-07-23 Reaffirmed MA3393 Clip - Spring, Tension, Outer 6.7 mm Bolt Hole, AMS 5525, Metric 2006-05-05 Reaffirmed MA3394 Clip - Spring, Tension, Inner 6.7 mm Bolt Hole, AMS 5525, Metric 2006-05-09 Reaffirmed MA3398 Bolt, Machine-Hex Head-Drilled, PD Shank, Long Thread, AMS5731, Metric 2006-05-05 Reaffirmed MA3399 Clamp - Tube Support, Spring Clips and PTFE Cushion Procurement Specification For 2006-05-05 Reaffirmed MA3421A Nut, Plain Hex - Drld, UNS G87400, Cadmium Plate, MJ Thread, Metric (NONCURRENT Nov 1996) 2007-09-06 Revised MA3422 Nut, Plain Hex-UNS S66286, Silver Plate, MJ Thread, Metric 2006-05-05 Reaffirmed MA3423 Nut, Plain Hex-Drld, UNS S66286, Silver Plate, MJ Thread, Metric 2006-05-05 Reaffirmed MA3424 Nut, Plain Hex-Thin, UNS S66286, Silver Plate, MJ Thread, Metric 2006-05-05 Reaffirmed MA3425A Nut, Castellated, Hex - UNS G87400, Cadmium Plate, MJ Thread, Metric (NONCURRENT Nov 1996) 2007-09-06 Revised MA3426 Nut, Castellated, Hex-UNS S66286, Silver Plate, MJ Thread, Metric 2006-05-10 Reaffirmed MA3427A Nut, Castellated, Hex - Thin, UNS G87400, Cadmium Plate, MJ Thread, Metric (NONCURRENT Nov 1996) 2007-10-11 Revised MA3428 Nut, Castellated, Hex-Thin, UNS S66286, Silver Plate, MJ Thread, Metric 2006-05-10 Reaffirmed MA3429 Nut, Self Locking, Spline Drive, Extended Washer, UNS N07001, Silver Plate, MJ Thread, Metric 2006-05-10 Reaffirmed MA3430A Nut, Self Locking-Reduced Hex Drive, AMS 6322, Cadmium Plated, MJ Thread, Metric (NONCURRENT Nov 1996) 2007-09-06 Revised MA3433 Nut, Self Locking - Shank UNS N07001, Silver Plate, MJ Thread, Metric 2006-05-05 Reaffirmed MA3434 Packing, Preformed - O-Ring Seal, AMS 7273, Metric 2006-05-02 Reaffirmed MA3437 Spacer, Sleeve - for 5 mm Bolt, AMS 4901 or AMS 4921, Metric 2006-05-05 Reaffirmed MA3438 Spacer, Sleeve - for 6 mm Bolt, AMS 4901 or AMS 4921, Metric 2006-05-05 Reaffirmed MA3441 Washer - Key, Cup Lock, AMS 5510, Metric 2006-05-10 Reaffirmed MA3442 Packing, Preformed - O-Ring Seal, AMS 7267, Metric 2006-08-14 Reaffirmed MA3444 Nut, Self Locking - Spline Drive, Captive Washer, UNS S66286, Silver Plate, MJ Thread, Metric 2006-05-10 Reaffirmed MA3445 Packing, Preformed O-Ring Seal, Fluorocarbon (Mil-R-83485, Type I), Metric 2004-07-27 Reaffirmed MA3446A Bolt, Machine - Tee Head, Chamfered, Classification: 1210 Mpa/730 °C Close Tol Shank, UNS N07001, Metric 2006-07-27 Reaffirmed MA3447 Bolt, Machine - Spline Drive HD, Close Tol Full Shank, AMS 5662, Metric 2006-08-14 Reaffirmed MA3448 Bolt, Spline Drive Special Extended Washer Head, Reduced Head, PD Shank, AMS 5708, Metric 2006-08-14 Reaffirmed MA3449 Bolt, Spline Drive Extended Washer Head, Reduced Head, Retainer Locked, PD Shank, AMS 5708, Metric 2006-08-14 Reaffirmed MA3450 Retainer, Nut and Bolt, Cup Lock 5 mm and 6 mm, AMS 5510, Metric 2006-05-10 Reaffirmed MA3453 Washer, Flat, AMS 5525, Metric 2006-05-10 Reaffirmed MA3454 Cover - Engine Accessory Drive, Square, 127.28 BC, Metric 2006-05-10 Reaffirmed MA3471 Gasket - Engine Accessory Drive Square, 127.28 BC, Metric 2006-05-10 Reaffirmed MA3476 Bolt, Machine - Spline Extended Washer, Full Head, PD Shank, Long Thread, AMS 5662 - Metric 2006-10-10 Reaffirmed MA3512 Bolt, Machine - Spline Drive Hd, Close Tol Full Shank, Uns N07001, Metric 2004-07-23 Reaffirmed MA3513 Bolt, Machine - Spline Drive Extended Washer Head, Pd Shank, Long Thread, Uns N07001, Metric 2004-07-23 Reaffirmed MA3520 Insert - Thin Wall, Short Self-Locking, 550 °C, Silver Plated UNS N07718, MJ Thread, Metric 2006-05-10 Reaffirmed MA3521 Insert - Thin Wall, Long Self-Locking, 550 °C, Silver Plated UNS N07718, MJ Thread, Metric 2006-05-10 Reaffirmed MA3574 Rivet-Solid, Universal Head, AS7232 Corrosion and Heat Resistant Nickel Alloy, Metric 2006-05-09 Reaffirmed MA4016 Ring, Retaining - External, Spiral Wound, Heavy & Medium Duty Cres, Metric 2006-10-10 Reaffirmed MA4017 Ring, Retaining - Internal, Spiral Wound, Heavy & Medium Duty Cres, Metric 2006-10-10 Reaffirmed MA4018 Pin, Straight, Headless, AMS 5688, Metric 2006-05-09 Reaffirmed MA4019 Pin, Straight, Headless, AMS 5732, Metric 2006-05-09 Reaffirmed MA4020 Ring, Retaining, External, Tapered, Type I, Class 2, AMS 5520, Metric 2006-05-09 Reaffirmed MA4021 Ring, Retaining, Internal, Tapered, Type I, Class 1, AMS 5520, Metric 2006-05-09 Reaffirmed MA4029 Ring, Retaining Internal, Beveled, Tapered, Type II, Class 1, AMS 5520, Metric 2006-05-09 Reaffirmed MA4030 Ring, Retaining, External, Reinforced E-Ring, Type I, Class 3, AMS 5520, Metric 2006-05-09 Reaffirmed MA4035 Rings, Retaining, Spiral Wound, Uniform Section Corrosion Resistant, Procurement Specification For, Metric 2004-07-23 Reaffirmed MA4036 Rings, Retaining, Tapered Width, Uniform Thickness Corrosion Resistant, Procurement Specification For, Metric 2004-07-23 Reaffirmed MA4037A Washer, Key - 90° Locking, CRES, UNS S32100, Metric 2006-05-09 Reaffirmed MA4038B Washer, Key - 180° Locking, Cres, UNS S32100, Metric 2007-06-28 Reaffirmed MA4039A Washer, Key - 270° Locking, Cres, UNS S32100, Metric 2006-05-09 Reaffirmed MA4040A Washer, Key - Dual Locking Positions, Cres, UNS S32100, Metric 2006-05-09 Reaffirmed MA4044 Nut, Spanner - End Slots, Cupwasher Locked, UNS S66286, Silver Plated, MJ Thread, Metric 2006-05-09 Reaffirmed MA4045 Washer, Cup, Lock - Spanner Nut, AMS 5646, Metric 2006-10-10 Reaffirmed MA4070 Pins, Procurement Specification For, Metric 2004-07-23 Reaffirmed MA4147 Bolt, Spline Drive Extended Washer, Reduced Shank, Ams 5662, Metric 2004-07-23 Reaffirmed MA4177 Nut, Self Locking - Hex Extended Washer UNS N07001, Silver Plate, MJ Thd, Metric 2006-05-03 Reaffirmed MA4187 Bolt, Machine, Spline Drive, Special Extended Washer, Reduced Head, Pd Shank, Ams 5662, Metric 2004-07-23 Reaffirmed MA4189 Screw, Machine 100 Degree Csk, Flat Head, Offset Cruciform Recess, Full Shank, Uns S66286, Mj Thread, Metric 2004-07-23 Reaffirmed MA4284 Areas for Calculating Stress Or Load Values for Metric Mj Internally Threaded Fasteners 2004-07-23 Reaffirmed MA4368 Nut, Plain, Round - Spanner Wrenching, Shaft Mounted, UNS S66286, Procurement Specification For, Metric 2006-05-09 Reaffirmed MA4811 Insert - Thin Wall, Self-Locking, Metric Short and Long Length Installation and Removal Of 2006-05-09 Reaffirmed MA4812 Insert - Thin Wall, Metric, Short and Long Hole Preparation For 2006-10-10 Reaffirmed MA7211A Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100, Metric Procurement Specification For 2006-05-09 Reaffirmed MAP1670 Studs, Installation Practice for Interference Fit - Metric 2006-05-09 Reaffirmed MAP1753A Hole Sizes, Recommended for Metric Fasteners on Propulsion Equipment 2006-05-04 Reaffirmed MAP3439 O-Ring Groove Design for Packing Preformed, Elastomeric O-Ring Seals, Static, Axial Compression, Metric 2004-08-02 Reaffirmed MAP3440 O-Ring Groove Design for Packing Preformed, Elastomeric O-Ring Seals, Static, Radial Squeeze, Metric 2006-05-09 Reaffirmed Committee Works In Progress List For individual committee information and document lists, please click below:         Aerospace Propulsion Division        E-25 General Standards for Aerospace and Propulsion Systems SAE Standards Main Page SAE Home Page SAE Aerospace Home Page