SAE members get discounts
on most products priced under $500.

Join SAE today and start saving!

www.sae.org
SAE International

SAE Standards

Document Number / Title
For more information, click on the Document Number
Publication date / Revision Number
AS25018A
CONNECTOR, RECEPTACLE EXTERNAL ELECTRIC POWER, AIRCRAFT, 28 VOLT DC, JET STARTING
  NOV 2014 / A
AS5860B
Retainers, (Back-Up Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Single Turn, Static Gland
  NOV 2014 / B
AIR1059D
Oxygen Cylinder Quality, Serviceability, Maintenance Transfilling and Marking
  NOV 2014 / D
AS5971C
Fitting Assembly, Elbow, 45°, Axially Swaged, Hydraulic, 5080 PSI
  NOV 2014 / C
AS5768/1C
Tool, Stripper, Manually Actuated, Electrical Insulation, Round Wire, Size 10 to 30
  NOV 2014 / C
ARP5316D
Storage of Elastomer Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly
  OCT 2014 / D
AS90387C
WIRING INSTALLATION TOOLS FOR PLASTIC AND METAL TIEDOWN STRAPS
  OCT 2014 / C
AS8791C
Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin
  OCT 2014 / C
AMS4937D
Titanium Alloy, Extrusions and Flash Welded Rings, 6Al - 6V - 2Sn, Beta Extruded Plus Annealed, Heat Treatable
  OCT 2014 / D
AS22759C
Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
  OCT 2014 / C
AS39029/16B
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR AS81511 SERIES 4 CONNECTORS)
  OCT 2014 / B
AS39029/47B
CONTACTS, ELECTRICAL CONNECTOR, PIN CRIMP REMOVABLE (FOR AS81511 SERIES 1 & 2 CONNECTORS)
  OCT 2014 / B
AS20708B
Synchros, General Specification For
  OCT 2014 / B
AS85049/2B
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, CATEGORY 1C (FOR AS50151 SOLDER TYPE, V THREAD OF AS310XX CLASSES A, B, C, OR K CONNECTORS, AS95234 CONNECTORS)
  OCT 2014 / B
AS85049/1B
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, GROUNDING (WITHOUT STRAIN RELIEF), CATEGORY 1C (FOR AS50151 SOLDER TYPE, V THREAD OF AS310XX CLASSES A, B, C, OR K CONNECTORS, AS95234 CONNECTORS)
  OCT 2014 / B
AS5977B
FITTING ASSEMBLY, 90°, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
  OCT 2014 / B
AS5970C
FITTING ASSEMBLY, ELBOW, 90°, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
  OCT 2014 / C
AS5972E
FITTING ASSEMBLY, TEE AXIALLY SWAGED, HYDRAULIC, 5080 PSI
  OCT 2014 / E
AS1297B
Reducers, Pneumatic Pressure, Missile
  OCT 2014 / B
AS85049/39C
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
  SEP 2014 / C
AS85049/38C
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
  SEP 2014 / C
AS85049/59B
CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)
  SEP 2014 / B
AS39029/1C
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS81714 TERMINAL JUNCTION SYSTEM)
  SEP 2014 / C
AS5230B
FITTING, UNION AND REDUCER, FLARELESS
  AUG 2014 / B
AS5768/2B
TOOL, STRIPPER, MANUALLY ACTUATED, SMALL GRIP, ELECTRICAL INSULATION, ROUND WIRE, SIZE 16 TO 30
  AUG 2014 / B
AS5239B
FITTING, ADAPTER, BULKHEAD, FLARELESS TO FLARED
  AUG 2014 / B
AS5238B
FITTING, ADAPTER, FLARELESS TO FLARED
  AUG 2014 / B
AS5241B
FITTING, ELBOW, 90°, BULKHEAD, FLARED TO FLARELESS
  AUG 2014 / B
AS5240B
FITTING, ELBOW, 90°, BULKHEAD, FLARELESS TO FLARED
  AUG 2014 / B
AS5231B
FITTING, PLUG, TUBE END, FLARELESS
  AUG 2014 / B
MA3367C
BOLT, MACHINE - SPLINE DRIVE HEAD, DRILLED, PD SHANK - LONG THREAD AMS6322, CADMIUM PLATED, METRIC
  AUG 2014 / C
MA3339C
BOLT, MACHINE - SPLINE EXTENDED WASHER, PD SHANK, LONG THREAD, AMS6322, CADMIUM PLATED, METRIC
  AUG 2014 / C
MA3289C
BOLT, MACHINE-HEX HEAD-PD SHANK MJ THREAD, AMS6322, CADMIUM PLATE, METRIC
  AUG 2014 / C
AS7452B
Bolts and Screws, Steel, Low Alloy Heat Treated, Roll Threaded
  AUG 2014 / B
AS25442A
DIES, FOR MS25441, HYDRAULIC CRIMPING, TOOL (FOR USE WITH ALUMINUM WIRE TERMINALS)
  AUG 2014 / A
AS5232B
FITTING, ADAPTER, REDUCER, PORT TO FLARELESS
  AUG 2014 / B
AS5242B
FITTING, ELBOW, 45°, BULKHEAD, FLARELESS TO FLARED
  AUG 2014 / B
AS25472A
GAGE, IN-SERVICE-INSPECTION, FOR USE WITH MS25442 CRIMPING DIES (FOR USE WITH ALUMINUM WIRE TERMINALS)
  AUG 2014 / A
AS23003A
GAGES - INSPECTION FOR MS23002 CRIMPING DIES (FOR USE WITH MS25036 INSULATED TERMINALS)
  AUG 2014 / A
MA3354C
NUT, PLAIN HEX - THIN, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
  AUG 2014 / C
MA3302C
NUT, PLAIN HEX - UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
  AUG 2014 / C
AS25439B
SPLICE-PERMANENT CRIMP STYLE, 2 WAY TYPE FOR ALUMINUM AIRCRAFT WIRE, CLASS 1
  AUG 2014 / B
AS23190/2A
STRAPS, CLAMPS, PLASTIC AND METAL, AND MOUNTING HARDWARE, PLASTIC FOR CABLE HARNESS TYING AND SUPPORT CLAMP, LOOP, METAL, CUSHIONED, ADJUSTABLE, WIRE SUPPORT, TYPE V, CLASS 1
  AUG 2014 / A
AS9303C
STUD, SHOULDERED, HEXAGON WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .1900-32 UNF-3A X .1900-32 UNF-3A
  AUG 2014 / C
AS9305C
STUD, SHOULDERED, HEXAGON WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .2500-28 UNF-3A
  AUG 2014 / C
AS9306C
STUD, SHOULDERED, STEPPED, HEX, WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3125-24 UNF-3A
  AUG 2014 / C
AS9307C
STUD, SHOULDERED, STEPPED, HEX, WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3750-24 UNF-3A
  AUG 2014 / C
AS9304C
STUD, SHOULDERED, STEPPED, HEX, WRENCHING, STEEL UNS G887400, CADMIUM PLATED, 125 KSI MIN, .1900-32 UNF-3A X .2500-28 UNF-3A
  AUG 2014 / C
AS151401B
STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3A
  AUG 2014 / B
AS150401B
NUT-HEX, CHECK, UNS G87400
  AUG 2014 / B
AS194B
Nomenclature - Engine Cooling Fan
  AUG 2014 / B
AS150501C
STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .2500-20 UNS X .1900-32 UNF-3A
  AUG 2014 / C
AS150801C
STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A
  AUG 2014 / C
AS153201B
STUD, STEPPED, DRILLD 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3750-16 UNS X .3125-24 UNF-3A
  AUG 2014 / B
AS152601B
STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .2500-20 UNS X .1900-32 UNF-3A
  AUG 2014 / B
AS13572A
Springs, Helical, Compression and Extension
  AUG 2014 / A
AIR5372A
Information on Brake-By-Wire (BBW) Brake Control Systems
  JUL 2014 / A
AS100016A
Lockwire, Brass
  JUL 2014 / A
AS81820/1D
BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, NARROW, GROOVED RACE, -65 TO +325 °F
  JUL 2014 / D
AS5975B
Fitting Assembly, Straight, Male Flareless, Axially Swaged, Hydraulic, 5080 psi
  JUL 2014 / B
AS81820/4D
BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, NARROW, CHAMFERED RACE, -65 TO +325 °F
  JUL 2014 / D
AS81820/2D
BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, WIDE, CHAMFERED RACE, -65 TO +325 °F
  JUL 2014 / D
AS81820/3D
BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, WIDE, GROOVED RACE, -65 TO +325 °F
  JUL 2014 / D
AS39029/112D
CONTACT BUSHING, ELECTRICAL CONNECTOR CONTACT, WIRE BARREL
  JUL 2014 / D
AS6107A
FITTING ASSEMBLY, STRAIGHT, EXTENDED BULKHEAD SHANK, FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI
  JUL 2014 / A
AS6106A
FITTING ASSEMBLY, STRAIGHT, EXTENDED BULKHEAD SHANK, FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
  JUL 2014 / A
AS5528B
Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting
  JUL 2014 / B
AS150301A
PIN-LOCK, BRASS
  JUL 2014 / A
AS115601B
SCREW - FLAT FILLISTER HEAD, DRILLED SHANK, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN., .1900-32 UNF-3A
  JUL 2014 / B
AS115951C
SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3125-18 UNC-3A
  JUL 2014 / C
AS39029/70B
CONTACT, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, FOR AS85028 CONNECTORS
  JUL 2014 / B
AS39029/69B
CONTACT, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, FOR AS85028 CONNECTORS
  JUL 2014 / B
AS4139C
FITTING ASSY, TEE, REDUCER, SWIVEL ON RUN, REDUCED BODY, FLARELESS
  JUL 2014 / C
AS3320E
STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .250-20UNJC X .250-28UNJF
  JUL 2014 / E
AS3319E
STUD - STRAIGHT, RING LOCKED, CRES AMS5731 .190-24UNJC X .190-32UNJF
  JUL 2014 / E
AS3321E
STUD - STRAIGHT, RING LOCKED, CRES AMS5731 .3125-18UNJC X .3125-24UNJF
  JUL 2014 / E
AS3322E
STUD - STRAIGHT, RING LOCKED, CRES AMS5731 .375-16UNJC X .375-24UNJF
  JUL 2014 / E
AS121601B
PIN, STRAIGHT, HEADED, CADMIUM PLATED, UNS G87400, .125 NOM
  JUL 2014 / B
AS81714/17A
TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDBACK TYPE, SIZE 22D, SERIES I
  JUL 2014 / A
AS8091A
Aircraft Jacking Pads Adapters and Sockets Design and Installation of
  JUN 2014 / A
AS24405A
ADAPTER, FLARELESS TUBE TO FLARED TUBE PRECISION TYPE
  JUN 2014 / A
AS21923B
ADAPTER, FLARELESS TUBE, BULKHEAD AND UNIVERSAL TO FLARED TUBE
  JUN 2014 / B
ARP5265B
Minimum Operational and Maintenance Responsibilities for Aircraft Tire Usage
  JUN 2014 / B
AS33411B
BRACKET, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS
  JUN 2014 / B
AS22520/3B
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, INSPECTION GAGE FOR TYPE I AND II TOOLS
  JUN 2014 / B
AMS6362G
Steel Tubing, Seamless, 0.95Cr - 0.20Mo (0.28- 0.33C) (SAE 4130), 150 ksi (1034 MPa) Tensile Strength
  JUN 2014 / G
AS81935/4B
BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, NARROW, EXTERNALLY THREADED, -65 TO +325 °F
  JUN 2014 / B
AS81306/1A
BAND INSTALLATION TOOL, HAND, ONE-STEP, FOR AS85049/128 CONNECTOR ACCESSORY CABLE SHIELD TERMINATING BANDS
  MAY 2014 / A
AS115651B
SCREW - FLAT FILLISTER HEAD, DRILLED SHANK, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN., .2500-28 UNF-3A
  MAY 2014 / B
AS115451C
SCREW – FLAT FILLISTER HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN. .2500-28UNF-3A
  MAY 2014 / C
AS115401B
SCREW – FLAT FILLISTER HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN. .1900-32 UNF-3A
  MAY 2014 / B
AS115501B
SCREW – FLAT FILLISTER HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN. .3125-24 UNF-3A
  MAY 2014 / B
AS115901C
SCREW – FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .2500-28 UNF – 3A
  MAY 2014 / C
AS39029/93B
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-83527, CONNECTOR)
  MAY 2014 / B
AS39029/37B
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-28748/10 CONNECTORS)
  MAY 2014 / B
AS25274B
CAP, ELECTRICAL (WIRE END, CRIMP STYLE, TYPE II, CLASS 1) FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
  MAY 2014 / B
AS39029/63C
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-24308 CONNECTORS)
  MAY 2014 / C
ARP4260B
Photometric and Colorimetric Measurement Procedures for Airborne Electronic Flat Panel Displays
  MAY 2014 / B
AS6370A
Wire, Electrical, Insulated, Antenna
  MAY 2014 / A
AS6047B
FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARELESS, PRECISION TYPE
  APR 2014 / B
AMS2980/5A
Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Material Specification: Carbon Fiber Fabrics, Plain Weave, 193 g/m2, and Epoxy
  APR 2014 / A
AMS2980/2B
Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 2 - Qualification Program
  APR 2014 / B
AMS2980/1B
Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 1 - General Requirements
  APR 2014 / B
ARP5647A
High Intensity Discharge Light Sources
  APR 2014 / A
AS83461/2A
O-RING M83461 STRAIGHT THREAD TUBE FITTING BOSS
  MAR 2014 / A
AMS2980B
Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material, Part 0 - Introduction
  MAR 2014 / B
AS568D
Aerospace Size Standard for O-rings
  MAR 2014 / D
ARP5141A
Chassis Mounted Lifts Used to Board Airline Passengers With Mobility Impairments
  MAR 2014 / A
AS22520/39A
CRIMPING TOOL, TERMINAL, HAND, ACTUATED, WIRE TERMINATION, IN-SERVICE INSPECTION GAGE FOR AS22520/5, /37, /38, AND /44 CRIMP TOOLS
  MAR 2014 / A
AIR4938A
Composite and Bonded Structure Technician/Specialist Training Document
  MAR 2014 / A
AS85421/2B
FITTING END, STANDARD DIMENSIONS FOR, BULKHEAD, DYNAMIC BEAM SEAL, MALE
  FEB 2014 / B
AS150201A
PIN-LOCK, STEEL
  FEB 2014 / A
AS21004A
TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1 FOR 175 °C TOTAL CONDUCTOR TEMPERATURE
  FEB 2014 / A
AS9226A
WIRE - STEEL, CORROSION AND HEAT RESISTANT, SAFETY, 1800 °F
  FEB 2014 / A
AS81914/2B
TUBING, PLASTIC, EXTRA FLEXIBLE, CONVOLUTED HELICAL, POLYTETRAFLUOROETHYLENE (PTFE) CLOSE CONVOLUTIONS
  JAN 2014 / B
AS81914/5A
TUBING, PLASTIC, EXTRA FLEXIBLE, CONVOLUTED, HELICAL, ETHYLENE TETRAFLUOROETHYLENE (ETFE), CLOSE CONVOLUTION
  JAN 2014 / A
AS81914/4B
TUBING, PLASTIC, EXTRA FLEXIBLE, CONVOLUTED, HELICAL, FLUORINATED ETHYLENE PROPYLENE (FEP), CLOSE CONVOLUTION
  JAN 2014 / B
AS81914/1A
TUBING, PLASTIC, FLEXIBLE, CONVOLUTED HELICAL, POLYTETRAFLUOROETHYLENE (PTFE) STANDARD CONVOLUTIONS
  JAN 2014 / A
AS81914/6A
TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, HELICAL ETHYLENE TETRAFLUOROETHYLENE (ETFE), STANDARD CONVOLUTION
  JAN 2014 / A
AS81914/3A
TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, HELICAL FLUORINATED ETHYLENE PROPYLENE (FEP), STANDARD CONVOLUTION
  JAN 2014 / A
AIR6151B
Torque, Threaded Application, Electrical Connector, Accessory and Terminal Board Installation
  JAN 2014 / B
AS85049/82C
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)
  JAN 2014 / C
AS3273A
NUT - SELF-LOCKING, CLINCH, SERRATED SHANK, 1200 °F, SILVER PLATED, UNS S66286, UNJ THREAD
  JAN 2014 / A
AS3272A
NUT - SELF-LOCKING, CLINCH, SERRATED SHANK, 700 °F, DRY FILM COATED, UNS S66286, UNJ THREAD
  JAN 2014 / A
AS3130B
PIN, EXPANSION - CRES, 303, LONG, UNS S30300
  JAN 2014 / B
AS3132B
PIN, EXPANSION - CRES, 303, SHORT, UNS S30300
  JAN 2014 / B
AS3126B
PIN, EXPANSION - CRES, 416 OR 416SE, LONG, UNS S41600/UNS S41623
  JAN 2014 / B
AS3128B
PIN, EXPANSION - CRES, 416 OR 416SE, SHORT, UNS S41600/UNS S41623
  JAN 2014 / B
AS3129B
PLUG, EXPANSION - CRES, 303, LONG; STD AND .010 OVERSIZE DIAMETERS, UNS S30300
  JAN 2014 / B
AS3131B
PLUG, EXPANSION - CRES, 303, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS S30300
  JAN 2014 / B
AS3125B
PLUG, EXPANSION - CRES, 416 OR 416SE, LONG; STD AND .010 OVERSIZE DIAMETERS, UNS S41600/UNS S41623
  JAN 2014 / B
AS3127B
PLUG, EXPANSION - CRES, 416 OR 416SE, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS S41600/UNS S41623
  JAN 2014 / B
AS17184C
SCREW, EXTERNALLY RELIEVED BODY, (SYNCHRO), CRES (UNS S30200 OR UNS S30300)
  JAN 2014 / C
AIR1351H
Manufacturers' Identification of Aerospace Electrical and Electronic Wiring Devices and Accessories
  JAN 2014 / H
AS1736D
WASHER, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS
  JAN 2014 / D
AS9310B
STUD, SHOULDERED, HEX, WRENCHING, DRILLED, STEEL, UNS G87400, CAD, PLATED, 125 KSI MIN, .2500-28 UNF-3A X .2500-28 UNF-3A
  JAN 2014 / B
AS9309B
STUD, SHOULDERED, STEPPED, HEX, WRENCHING, DRILLED, STEEL, UNS G87400, CAD, PLATED, 125 KSI MIN, .1900-32 UNF-3A X .2500-28 UNF-3A
  JAN 2014 / B
AS9312B
STUD, SHOULDERED, STEPPED, HEX, WRENCHING, DRILLED, STEEL, UNS G87400, CAD, PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3750-24 UNF-3A
  JAN 2014 / B
AS9311B
STUD, SHOULDERED, STEPPED, HEX, WRENCHING, DRILLED, STEEL, UNS G878400, CAD, PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3125-24 UNF-3A
  JAN 2014 / B
AS81714/16A
TERMINAL JUNCTION SYSTEM, RACK ASSEMBLY, TRACK, FEEDBACK TYPE, LIGHT WEIGHT, SERIES I
  DEC 2013 / A
AS17143A
TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, TYPE II, CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
  DEC 2013 / A
AS7250D
Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UN Thread Form
  DEC 2013 / D
AS5969D
FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC 5080 PSI
  DEC 2013 / D
AS50881E
Wiring Aerospace Vehicle
  DEC 2013 / E
AS85049/24C
(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 90°, SHIELD TERMINATION, CATEGORY 3A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
  DEC 2013 / C
AS39029/97A
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, COAXIAL, SIZE 1 (FOR DOD-C-83527 CONNECTORS)
  DEC 2013 / A
AS39029/23A
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26482 SERIES 1 CONNECTORS)
  DEC 2013 / A
AS39029/19B
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-81511 SERIES 3 AND 4 CONNECTORS)
  DEC 2013 / B
AS39029/98A
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, COAXIAL, SIZE 1 (FOR DOD-C-83527 CONNECTORS)
  DEC 2013 / A
AS39029/24A
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26482 SERIES 1 CONNECTORS)
  DEC 2013 / A
AS39029/20B
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-81511 SERIES 3 CONNECTORS)
  DEC 2013 / B
AS39029/21B
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-81511 SERIES 4 CONNECTORS)
  DEC 2013 / B
AS9881B
NUT, PLAIN, HEXAGON, CADMIUM PLATED, UNS G87400, 125 KSI MIN
  NOV 2013 / B
AS29513B
PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, "O" RING
  NOV 2013 / B
AIR4994A
High Pressure Pneumatic Compressors Users Guide For Aerospace Applications
  NOV 2013 / A
AS81824/1A
SPLICE, IN-LINE, ELECTRIC, CRIMP, SN/CU, ENVIRONMENTAL, HEAT-SHRINKABLE SLEEVE (150 °C), 1 X 1 SEALANT OPENING
  NOV 2013 / A
AS81824C
Splice, Electric, Crimp, Copper, Environment Resistant
  NOV 2013 / C
AS4408B
FITTING ASSEMBLY, ELBOW 90°, REDUCER AND NONREDUCER, INTERNAL FLARE
  NOV 2013 / B
ARP5149B
Training Program Guidelines for Deicing/Anti-Icing of Aircraft on Ground
  NOV 2013 / B
AS8584B
Brake Systems, Wheel, Military Aircraft
  NOV 2013 / B
AS4468F
Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification
  OCT 2013 / F
AS5420F
Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification
  OCT 2013 / F
AS121501B
Nut, Plain - Hexagon, Steel UNS G87400, Cadmium Plated, 125 ksi min
  OCT 2013 / B
AS1584E
Fitting, Elbow, 90 Degree, Integral Weld Ring, 3000 psi
  OCT 2013 / E
AS1585F
Fitting, Reducer, Integral Weld Ring, 3000 psi
  OCT 2013 / F
AS1583E
Fitting, Tee, Integral Weld Ring, 3000 psi
  OCT 2013 / E
AS5958E
Fittings, Axially Swaged Tube with Flareless Separable, Fluid System for Operating Pressures up to and including 5080 psi (35 000 kPa), Specification for
  OCT 2013 / E
AS85352/4A
INFLATOR ASSEMBLY DUAL CHUCK STEM GAGE KIT
  OCT 2013 / A
AS85352/3A
INFLATOR ASSEMBLY GAGE ELEMENTS
  OCT 2013 / A
AS85352/2A
Inflator Assembly Remote Controller Assembly
  OCT 2013 / A
AS1893E
Ring, Weld, 3000 psi, Cres
  OCT 2013 / E
AS1580E
Ring, Weld, 3000 psi, Titanium
  OCT 2013 / E
AS4695C
Sleeve, Tube End, Acorn to Weld, Short Flareless
  OCT 2013 / C
AS4693D
Union, Tube End, External Thread to Weld, Short Flareless
  OCT 2013 / D
AMS2644F
Inspection Material, Penetrant
  OCT 2013 / F
AS39029/22B
Contacts, Electrical, Connector, Socket, Crimp Removable (for AS81714 Terminal Junction System Series II and MIL-C- 81511 Series 3 and 4 Class L Connectors)
  OCT 2013 / B
AS85352/1A
Inflator Assembly Kit
  OCT 2013 / A
AS39029/25B
Contacts, Electrical Connector, Pin, Crimp Removable, Shielded (for MIL-DTL-26482 Series 1 Connectors)
  OCT 2013 / B
AS39029/26B
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded (For MIL-DTL-26482 Series 1 Connectors)
  OCT 2013 / B
ARP5448B
Plain Bearing Test Methods
  OCT 2013 / B
AMS6352K
Steel Sheet, Strip, and Plate, 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135)
  OCT 2013 / K
AS39029/77B
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS)
  SEP 2013 / B
AS39029/78B
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-DTL-38999 SERIES II CONNECTORS)
  SEP 2013 / B
AIR4989A
Design Considerations for Enclosed Turboshaft Engine Test Cells
  SEP 2013 / A
AS3563D
NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, EXTENDED WRENCH PAD, 160 KSI, 800 °F, UNS S66286
  AUG 2013 / D
AS4296
Drawing Interpretation and Standard Machining Practices, Couplings, Fittings and Hose Ends, Fluid Systems
  AUG 2013
AS5000D
Fitting, Plug-in Union, Ring Locked, 24° Cone, Fluid Connection, 5080 psi (35 000 kPa), Specification for
  AUG 2013 / D
AS6026A
Control Unit, Pressure Generating, Manually Operated, Aircraft Hydraulic Brake System
  AUG 2013 / A
AS85049/103C
CONNECTORS, ACCESSORIES, COMPOSITE, RFI/EMI, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING, CATEGORY 3C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
  JUL 2013 / C
AS8037C
Minimum Performance Standard for Aircraft Position Lights
  JUL 2013 / C
ARP5483/6A
Rolling Element Bearing Test Method for Dimensional Stability
  JUL 2013 / A
ARP5483/5A
Rolling Element Bearing Test Method for Radial Limit and Fracture Load Testing
  JUL 2013 / A
ARP5483/4A
Rolling Element Test Method for Axial Limit and Fracture Load Testing
  JUL 2013 / A
AS128363A
STUD - STRAIGHT, DRILLED, .2500-20UNS X .2500-28UNF-3A
  JUL 2013 / A
AS128687A
STUD - STRAIGHT, DRILLED, .3125-18UNS X .3125-24UNF-3A
  JUL 2013 / A
AS126881A
STUD - STRAIGHT, NECKED, .3750-16UNS X .3750-24UNF-3A
  JUL 2013 / A
AS127193A
STUD - STRAIGHT, WAISTED, .4375-14 X .4375-20UNF-3A
  JUL 2013 / A
AS129293A
STUD - WAISTED, DRILLED, .3750-16UNS X .3750-24UNF-3A
  JUL 2013 / A
AS151701B
STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .5000-13 UNS X .4375-20 UNF-3A
  JUL 2013 / B
AS469C
Drive - Accessory, 8" Bolt Circle
  JUN 2013 / C
AS39029/76C
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-DTL-38999 SERIES I, II, III, IV CONNECTORS AND 50 OHM CABLE)
  JUN 2013 / C
ARP1176A
Oxygen System and Component Cleaning
  JUN 2013 / A
AS9964A
BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL AMS6322, CADMIUM PLATED, .625-18 UNJF-3A
  APR 2013 / A
AS39029/36B
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-28748/9 CONNECTORS)
  APR 2013 / B
AS39029/101A
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-12883/44, MIL-DTL-12883/45, MIL-DTL-12883/46, AND MIL-DTL-12883/52 RELAY)
  APR 2013 / A
AS5986C
FITTING ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL, 4000 PSI AND 5000 PSI
  APR 2013 / C
AS123301B
Rivet, Solid, Universal Head, Nickel Alloy UNS N06600
  APR 2013 / B
AS85049/128D
SHIELD BAND, CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, CATEGORY 7 (FOR AS85049/82 - /90, /93, /109 - /117 ACCESSORIES)
  APR 2013 / D
AMSP5315B
Butadiene - Acrylonitrile (Nbr) Rubber for Fuel-Resistant Seals, 60 to 70
  APR 2013 / B
AIR5648A
Fuel Versus Oxygen: Evaluations and Considerations
  APR 2013 / A
MA3304B
BOLT-MACHINE, HEX HEAD, DRILLED, PD SHANK, MJ THREAD, AMS 6322, CADMIUM PLATE, METRIC
  MAR 2013 / B
AS5792B
Fitting Assembly, Straight, Female Flareless, Axially Swaged, Hydraulic
  MAR 2013 / B
AS222B
Flange - Two-Bolt Exhaust
  MAR 2013 / B
AS223B
Flange Installation - Two-Bolt Exhaust
  MAR 2013 / B
AS221B
Gasket - Two-Bolt Exhaust Flange
  MAR 2013 / B
AS90B
Propeller Blades, Aluminum Alloy, Shank Dimensions For
  MAR 2013 / B
AMS6372M
Steel, Mechanical Tubing, 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135)
  FEB 2013 / M
AS9705C
BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, CORROSION AND HEAT RESISTANT NICKEL ALLOY, .1900-32 UNJF-3A
  FEB 2013 / C
AS85049/11C
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
  FEB 2013 / C
AS85049/51C
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, 90°, SELF-LOCKING AND NON-SELF-LOCKING CATEGORY 4B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
  FEB 2013 / C
AS39029/33B
Contacts, Electrical Connector, Socket, Crimp Removable (for MIL-C-81511 Series 1 Connectors)
  FEB 2013 / B
AS39029/46B
Contacts, Electrical Connector, Socket, Crimp Removable (for MIL-C-81511 Series 2 Connectors)
  FEB 2013 / B
ARP365B
Drives - Square Flange .600 PD Spline Accessory
  FEB 2013 / B
AS6121A
FITTING ASSEMBLY, TEE, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
  FEB 2013 / A
AS4691F
Fitting Assembly, Tee, Flareless and Short Flareless, Reducer, Retained Nut on Run
  FEB 2013 / F
ARP166B
Propeller Clearance Envelope
  FEB 2013 / B
ARP238B
Propeller Control Clearance - Dual Rotation or Double Acting System Single Rotation Propeller Shaft Reciprocating Engines
  FEB 2013 / B
ARP237B
Propeller Control Clearance - Single Acting System, Single Rotation Propeller Shaft Reciprocating Engines
  FEB 2013 / B
ARP244B
Propeller Control Installation Clearance
  FEB 2013 / B
AS5553A
Fraudulent/Counterfeit Electronic Parts; Avoidance, Detection, Mitigation, and Disposition
  JAN 2013 / A
AS339B
Cover - Shipping Container Log Data and Inspection Port
  JAN 2013 / B
AS1009J
Fitting, Tee, Standard and Reducer, Bulkhead on Side, Flareless
  JAN 2013 / J
AS1003H
Fitting, Tee, Standard and Reducer, Bulkhead on Run, Flareless
  JAN 2013 / H
AS4674A
Tee Assembly, Retained Nut on Run, Short Flareless
  DEC 2012 / A
AS21440A
Bearing, Roller, Needle, Track Roller, Integral Stud, Sealed, Type VIII, Antifriction, Inch
  DEC 2012 / A
ARP4146C
Coiled Tubing - Titanium Alloy, Hydraulic Applications, Aerospace
  DEC 2012 / C
AS3619A
Cable, Safety, Ferrule, Elongated, Nickel Alloy, UNS N06600
  DEC 2012 / A
AS4667A
Elbow Assembly, 45°, Retained Nut, Short Flareless
  NOV 2012 / A
AS4670A
Elbow Assembly, 90°, Retainer Nut, Short Flareless
  NOV 2012 / A
AS6450A
Lubricant Application, Solid Film, Heat Cured, Potable Water, Hydraulic, and Oxygen Systems
  NOV 2012 / A
AS4675A
Tee Assembly, Retained Nut on Side, Short Flareless
  NOV 2012 / A
AS4409B
Fitting Assembly, Elbow 45°, Reducer and Nonreducer, Internal Flare to Flared Tube
  NOV 2012 / B
AIR5697A
Aerospace Landing Gear - FAA Regulatory History - Airplane Wheels, Tires, and Brakes
  OCT 2012 / A
AS9933B
Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS6322, Cadmium Plated, .250-28 UNJF-3A
  OCT 2012 / B
AS9914B
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Steel AMS6322, Cadmium Plated, .190-32 UNJF-3A
  OCT 2012 / B
AS9219D
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 ksi Min, .3125-24 UNJF-3A
  OCT 2012 / D
AS3225C
Cover - Engine Accessory Drive, Round, 10.000 Bolt Circle, AMS4490 (UNS M11910)
  OCT 2012 / C
AS3223B
Cover - Engine Accessory Drive, Round, 5.000 Bolt Circle, AMS4490 (UNS M11910)
  OCT 2012 / B
AS3224B
Cover - Engine Accessory Drive, Round, 8.000 Bolt Circle, AMS4490 (UNS M11910)
  OCT 2012 / B
AS3221B
Cover - Engine Accessory Drive, Square, 2.653 Bolt Circle, AMS4490 (UNS M11910)
  OCT 2012 / B
AS3222C
Cover - Engine Accessory Drive, Square, 5.000 Bolt Circle, AMS4490 (UNS M11910)
  OCT 2012 / C
AS6053A
Tests, Impact, Shock Absorber Landing Gear, Aircraft
  OCT 2012 / A
AS6046A
Fitting, Cross, Standard and Reducer, Flareless, Precision Type
  SEP 2012 / A
AS6048A
Fitting, Elbow, 90°, Standard and Reducer, Bulkhead, Flareless, Precision Type
  SEP 2012 / A
AS3419B
Bolt, Machine, Double Hex, Ext Washer Head, Close Tolerance Shank, UNS N07718, .3125-24 UNJF-3A (Stress Rupture Resistant)
  AUG 2012 / B
MA3374C
Bolts and Screws, UNS S66286, Corrosion and Heat Resistant Steel, Procurement Specification, Metric
  AUG 2012 / C
AS6044A
Fitting, Elbow, 90 Degree, Standard and Reducer, Flareless, Precision Type
  AUG 2012 / A
AS9316B
Screw, Machine - Hexagon Head, Slotted, Full Shank, Alloy Steel, UNS K14675, 135 ksi Min, .1900-32 UNS-3A
  AUG 2012 / B
AS90335A
Connector, Receptacles, Plugs, Adaptor, El, Embedded, Printed Circuit Board Lamp Lighting Panels
  AUG 2012 / A
AMSI7068C
Ingot, Zinc Alloy (For Sheet Metal Forming Dies)
  AUG 2012 / C
AS402C
Automatic Pilots
  AUG 2012 / C
AS5823B
Card-Compass Correction
  AUG 2012 / B
AS85049/89C
Connector Accessories, Electrical, Backshell, 45°, Self-Locking, Shield Band Termination (RFI/EMI), Shrink Sleeve Accommodation, Category 3B (For MIL-DTL-38999 Series III and IV Connectors)
  AUG 2012 / C
AS85049/90C
Connector Accessories, Electrical, Backshell, 90°, Self-Locking, Shield Band Termination (RFI/EMI), Shrink Sleeve Accommodation, Category 3B (For MIL-DTL-38999 Series III and IV Connectors)
  AUG 2012 / C
AS85049/88C
Connector Accessories, Electrical, Backshell, Straight, Self-Locking, Shield Band Termination (RFI/EMI), Shrink Boot Accommodation, Category 3B (For MIL-DTL-38999 Series III and IV Connectors)
  AUG 2012 / C
AS39029/4B
Contacts, Electrical Connector, Pin, Crimp Removable (For MIL-DTL-26482 Series 2, AS81703 Series 3, MIL-DTL-83723 Series I and III, and MIL-DTL-83733 Connectors)
  AUG 2012 / B
AS399B
Direction Instrument, Magnetic (Stabilized Type)
  AUG 2012 / B
AS397B
Direction Instrument, Non-Magnetic, Stabilized Type (Directional Gyro)
  AUG 2012 / B
AS6045A
Fitting, Tee, Standard and Reducer, Flareless, Precision Type
  AUG 2012 / A
AS406A
Flight Directors (Turbine-Powered Subsonic Aircraft)
  AUG 2012 / A
AS407D
Fuel Flowmeters
  AUG 2012 / D
AS405D
Fuel and Oil Quantity Instruments
  AUG 2012 / D
AS14114A
Gyroscope, Displacement, Roll and Pitch (Hard Mounted)
  AUG 2012 / A
AS5259/1A
Crimping Tool and Accessories, Remote Crimp Head, Hydraulic, Wire Size 8 to 0000 for Insulated and Un-Insulated Crimp Barrels
  AUG 2012 / A
AS85049/142C
Connector Accessories, Electrical Boots and Sleeves, Transitions, Heat-Shrinkable, Category 7
  AUG 2012 / C
AS35091A
Receptacles, Electric, Aircraft Storage Battery
  AUG 2012 / A
AS85028B
Connector, Electrical, Rectangular, Individual Contact Sealing, Polarized Center Jackscrew, General Specification For
  JUL 2012 / B
AS85049/118C
Connector Accessories, Electrical, Strain Relief, Straight Self-Locking, Non-Self-Locking, Category 4B (For AS50151 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3, and MIL-DTL-83723 Series III Connectors)
  JUL 2012 / C
AS39029/30B
Contacts, Electrical Connector, Socket, Crimp Removable (for AS50151 AS345XX Series and MIL-DTL-83723 Series II Connectors)
  JUL 2012 / B
AS9212B
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675, 195 ksi min, .4375-20 UNJF-3A
  JUL 2012 / B
AS85049/9C
Connector accessories, electrical, backshell, environmental, cable sealing, 90°, category 1A (for MIL-C-5015 crimp, MIL-C- 26482 series 2, MIL-C-81703 series 3, and MIL-C-83723 series III connectors)
  JUL 2012 / C
AS85049/8C
Connector accessories, electrical, backshell, environmental, cable sealing, 90°, shield termination, category 1A (for MIL-C- 5015 crimp, MIL-C-26482 series 2, MIL-C-81703 series 3, MIL-C- 83723 series III connectors)
  JUL 2012 / C
AS6043A
Fitting, Tee, Standard and Reducer, Bulkhead on Run, Flareless, Precision Type
  JUL 2012 / A
ARP4287A
Supplemental Oxygen Devices with Automatic or Manual Presentation
  JUL 2012 / A
AS1426B
Standard Galley System Specification, Part I, Performance, Design, Development
  JUL 2012 / B
AS5663A
Minimum Performance Requirements for Transport Airplane Wheel and Brake Assemblies Using Electric Power Actuation
  JUL 2012 / A
AS8568A
Binoculars, Prismatic, Hand-Held (for Aeronautical Use) (7 x 50 and 6 x 42 (Wide Field))
  JUN 2012 / A
AS39029/55A
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded (For MIL-DTL-26500 and MIL-DTL-26518 Connectors)
  JUN 2012 / A
ARP6448
Gaining Approval for Seats with Integrated Electronics in Accordance with AC21-49 Section 7.b
  JUN 2012
AIR5020A
Time-Dependent In-Flight Thrust Determination
  MAY 2012 / A
AS4383C
Fitting Assembly, Reducer Ring Locked Port Connection to Beam Seal 5000 psi
  MAY 2012 / C
AS7928/12C
Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, Bell-Mouthed, Tin Whisker Resistant, Type II, Class 1 (For 105 °C Total Conductor Temperature)
  MAY 2012 / C
AS1010G
Fitting, Elbow, 45°, Standard and Reducer, Bulkhead, Flareless
  APR 2012 / G
AS1008H
Fitting, Elbow, 90°, Standard and Reducer, Bulkhead, Flareless
  APR 2012 / H
AS1002H
Fitting, Tee, Standard and Reducer, Bulkhead and Internal Port on Run, Flareless
  APR 2012 / H
AS1001H
Fitting, Tee, Standard and Reducer, Bulkhead on Run, Internal Port on Side, Flareless
  APR 2012 / H
AS1582F
Fitting, Adapter, External Thread Flareless to Integral Weld Ring, 3000 psi
  APR 2012 / F
AS1581D
Fitting, Sleeve, Flareless Acorn to Integral Weld Ring, 3000 psi
  APR 2012 / D
AS3626A
Nut, Self-Locking, Double Hexagon, Reduced Envelope, UNS S66286, Counterbored Silver Plated Threads Only
  APR 2012 / A
AS3625A
Nut, Self-Locking, Double Hexagon, Reduced Envelope, UNS S66286, Silver Plated Threads Only
  APR 2012 / A
AS85049/139A
Bushing, Cable Clamp to Cable, Telescoping for AS85049 Cable Clamps, Category 9
  APR 2012 / A
AS85049/34C
Connector Accessories, Electrical, Backshell, Non-Environmental, Threaded Adapter, Category 7 (for MIL-DTL-26482 Series 1 Jam Nut Receptacle Connector)
  APR 2012 / C
AS85049/33C
Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Shielded Termination, Threaded Adapter, Category 7 (for MIL-DTL-38999 Series I and II Connectors)
  APR 2012 / C
AS33698A
Insert Arrangements, Electric Connector, Shell Size 3 (for AS81703 Connectors)
  APR 2012 / A
AS50141B
Tube, Pneumatic Tire, Aircraft
  APR 2012 / B
AS81914/11A
Tubing, Plastic, Lightweight, Zero Halogen, Extra Flexible, Convoluted, Helical, Close Convolution, Polyetheretherketone (PEEK)
  MAR 2012 / A
AS6449A
Solid Film Lubricant for Fluid Fittings in Oxygen, Potable Water, Hydraulic, and Other Systems
  MAR 2012 / A
AS85049/141B
Connector Accessories, Electrical Boots, Heat-Shrinkable, 90°, Category 7
  MAR 2012 / B
AS85049/140B
Connector Accessories, Electrical Boots, Heat-Shrinkable, Straight, Category 7
  MAR 2012 / B
AIR5468B
Ultraviolet (UV) Lasers for Aerospace Wire Marking
  MAR 2012 / B
AMS10139B
Zee - Unequal Leg Extruded
  MAR 2012 / B
AS23190B
Wiring, Positioning, and Support Accessories
  MAR 2012 / B
AS25036D
Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, Bell-Mouthed, Type II, Class 1 (For 105 °C Total Conductor Temperature)
  MAR 2012 / D
AS81914/8A
Tubing, Plastic, Flexible, Convoluted, Annular Polyvinylidene Fluoride (PVDF), Thermally Stabilized, Standard Convolutions
  MAR 2012 / A
AS81914/9A
Tubing, Plastic, Flexible, Convoluted, Helical Perfluoroalkoxy (PFA), Standard Convolution
  MAR 2012 / A
ARP1798A
Portable Emergency Lighting Systems for Flight Crew Members
  MAR 2012 / A
AS125101C
Rivet - 100° Countersunk Head, Mild Steel
  FEB 2012 / C
AS125551B
Rivet - Universal Head, Mild Steel
  FEB 2012 / B
AS116901B
Screw - Oval Fillister Head, .112-40
  FEB 2012 / B
AS117041B
Screw - Oval Fillister Drilled Head, .164-32
  FEB 2012 / B
AS4373E
Test Methods for Insulated Electric Wire
  FEB 2012 / E
AS9320B
Washer, Flat - AMS6350
  FEB 2012 / B
AS9482B
Washer, Flat - Steel AMS6437 or AMS6485, Diffused Nickel-Cadmium Plated, Countersunk
  FEB 2012 / B
AS9217C
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 Ksi Min, .190-32 UNJF-3A
  FEB 2012 / C
AS39029/64A
Contacts, Electrical Connector, Pin, Crimp Removable (For MIL-DTL-24308 Connectors)
  FEB 2012 / A
AS116961C
Screw - Oval Fillister Drilled Head, .138-32
  FEB 2012 / C
AS116925B
Screw - Oval Fillister Head, .138-32
  FEB 2012 / B
AS117001B
Screw - Oval Fillister Head, .164-32
  FEB 2012 / B
AS9489C
Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, UNS S66286, 130 KSI Min, .1900-32 UNJF-3A
  JAN 2012 / C
AS9218E
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 Ksi Min, .2500-28 UNJF-3A
  JAN 2012 / E
AS9216C
Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 Ksi Min, .1640-36 UNJF-3A
  JAN 2012 / C
AS85049/75A
Connector Accessories, Electrical, Potting Boot, Category 7 (For Use With AS85049/58 Potting Boot Ring)
  JAN 2012 / A
AS85049/74A
Connector Accessories, Electrical, Potting Boot, Category 7 (For Use With AS85049/61 Potting Boot Ring)
  JAN 2012 / A
AS39029/58A
Contacts, Electrical Connector, Pin, Crimp Removable (For MIL-DTL-24308, MIL-DTL-38999 Series I, II, III, and IV, and MIL-DTL-55302/69 and MIL-DTL- 83733 Connectors)
  JAN 2012 / A
AS39029/57A
Contacts, Electrical Connectors, Socket Crimp Removable (For MIL-DTL-24308, MIL-DTL-38999 Series II, MIL-DTL-55302/68, /71, /72, /75 and MIL-DTL-83733 Connectors)
  JAN 2012 / A
AIR4543B
Aerospace Hydraulics and Actuation Lessons Learned
  JAN 2012 / B
AS81790/3
INSPECTION GAGE, FOR AS81790/1 CONNECTORS, AIRCRAFT EXTERNAL ELECTRIC POWER
  JAN 2012
AS598
Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems
  JAN 2012
AS9210C
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675, 195 Ksi Min, .3125-24 UNJF-3A
  JAN 2012 / C
AS9209C
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14765, 195 Ksi Min, .2500-28 UNJF-3A
  JAN 2012 / C
AS9207C
Screw, Machine - Steel, Diffused Nickel - Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675 195 Ksi Min, .1640-36 UNJF-3A
  JAN 2012 / C
AS150426D
Nut - Hex, Check, AMS6320, AMS632 or AMS6325
  JAN 2012 / D
AS85049/64A
Connector Accessories, Electrical, Strain Relief, Split, Straight, Category 4C (MIL-DTL-38999 Series I and II Connectors)
  JAN 2012 / A
AS85049/65A
Connector accessories, electrical, strain relief, split, 90°, category 4C (MIL-C-38999 Series I and II connectors)
  JAN 2012 / A
AS22520/18
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION; IN-SERVICE INSPECTION GAGES FOR AS22520/17 CRIMP TOOLS
  JAN 2012
AS22520/41
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION; TYPE II FOR TERMINALS AND SPLICES SIZE 10-12
  JAN 2012
AS81659A
Connectors, Electrical, Rectangular Crimp Contacts, General Specification For
  JAN 2012 / A
AS39029/90A
Contact, Electrical Connector, Concentric Twinax, Pin, Size 8
  JAN 2012 / A
AS39029/91A
Contact, Electrical Connector, Concentric Twinax, Socket, Shielded, Size 8
  JAN 2012 / A
AIR5455A
Impact of Changes in Test Dust Contaminants and Particle Counter Califbration on Laboratory Filter Element Performance and Fluid Cleanliness Classes
  JAN 2012 / A
AS6124
Aluminum Axially Swaged Fittings, Installation and Inspection Procedure
  DEC 2011
AS3236C
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .1900-32 UNJF-3A
  DEC 2011 / C
AS3238C
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .3125-24 UNJF-3A
  DEC 2011 / C
AS3239C
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .3750-24 UNJF-3A
  DEC 2011 / C
AS3240C
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .4375-20 UNJF-3A
  DEC 2011 / C
AS3332B
Gasket - Copper, Tube Connection, Plain
  DEC 2011 / B
ARP6178
Fraudulent/Counterfeit Electronic Parts; Tool for Risk Assessment of Distributors
  DEC 2011
AIR1186A
Installation and Use of Equilateral Triangle Cross-Section Hydraulic O-Ring Seal Backup Rings (Dyna-Baks)
  DEC 2011 / A
AIR1077A
Metallic Seal Rings for High Temperature Reciprocating Hydraulic Service
  DEC 2011 / A
AS3237C
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .2500-28 UNJF-3A
  DEC 2011 / C
AS21155B
Bearing, Plain, Self-Aligning, Chamfered, Outer Ring
  DEC 2011 / B
AS21154B
Bearing, Plain, Self-Aligning, Grooved Outer Ring
  DEC 2011 / B
AS81969/1
INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE III, CLASS 2, COMPOSITION C
  DEC 2011
AS20659D
Terminal, Lug, Crimp Style, Copper, Uninsulated, Ring Tongue, Type I, Class I, for 175°C Total Conductor Temperature
  DEC 2011 / D
AS81044/11A
Wire, Electric, Crosslinked Polyalkene Insulated, Silver-Coated Copper, Light Weight, 600-Volt, 150 °C
  DEC 2011 / A
AS81044/13A
Wire, Electric, Crosslinked Polyalkene Insulated, Silver-Coated High Strength Copper Alloy, Light Weight, 600-Volt, 150 °C
  DEC 2011 / A
AS81044/10A
Wire, Electric, Crosslinked Polyalkene Insulated, Silver-Coated High Strength Copper Alloy, Medium Weight, 600-Volt, 150 °C
  DEC 2011 / A
AS4665B
Fitting, Adapter, Union and Reducer, Short Flareless to Boss
  DEC 2011 / B
AIR4543/1
Aerospace Hydraulics and Actuation Lessons Learned
  DEC 2011
AS1290B
Graphic Symbols for Aircraft Hydraulic and Pneumatic Systems
  DEC 2011 / B
AS102B
Fitting, Cross, Reducer, Flareless and Short Flareless
  DEC 2011 / B
AS6013A
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 275 °F, 4000 Max PSI, Flareless, Titanium Fittings, Straight to Straight
  DEC 2011 / A
AS6014A
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 275 °F, 4000 PSI Max, Flareless, Titanium Fittings, Straight to 45°
  DEC 2011 / A
AS6015A
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 275 °F, 4000 PSI Max, Flareless,Titanium Fittings, Straight to 90°
  DEC 2011 / A
ARP5475A
Abuse Load Testing for In-Seat Deployable Video Systems
  NOV 2011 / A
ARP5585A
Replacement Or Modification of Components on Aircraft Seat Restraint Systems By Non-Original Equipment Manufacturers
  NOV 2011 / A
AS6102
Fitting, Tee, Standard and Reducer, Bulkhead on Side, Flared, 37°Spherical
  NOV 2011
AS21235A
Fitting, Tiedown, Cargo Ring (10 000 Lb) and Seat Stud, Type II
  NOV 2011 / A
AS21236A
Ring, Cargo Tiedown (10 000 Lb), Type III
  NOV 2011 / A
AS21237A
Ring, Cargo Tiedown (25 000 Lb), Type IV
  NOV 2011 / A
AS39029C
Contacts, Electrical Connector, General Specification For
  NOV 2011 / C
ARP6402A
LED Landing, Taxiing, Runway Turnoff, and Recognition Lights
  NOV 2011 / A
AS81824/11
SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE, NI /CU, INSULATED, ENVIRONMENT RESISTANT, CLASS 1, 200 °C MAX, 1X1 SEALANT OPENING
  NOV 2011
AS7928/14
TERMINAL, ELECTRIC, PERMANENT, CRIMP STYLE, TIN-COATED COPPER, INSULATED, ENVIRONMENT RESISTANT, CLASS 1, 150 ºC, HEATLESS SEALING
  NOV 2011
ARP4087C
Wing Inspection Lights - Design Criteria
  NOV 2011 / C
AS9144B
Gasket - Type XX Engine Accessory Drive
  NOV 2011 / B
AS6116
Aluminum Fittings, Axially Swaged Tube with Flareless Seperable, Fluid System, Up to 1500 psi (10 340 kPa) Maximum, Specification for
  NOV 2011
AS7928/11B
Terminal, Lug, Crimp Style, Copper, Uninsulated, Ring Tongue, Tin Whisker Resistant, Type I, Class I, for 175 °C Total Conductor Temperature
  NOV 2011 / B
AIR5122A
Acrylic Window Terminology and Crazing Acceptance Criteria
  NOV 2011 / A
AS85049/28A
Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Shield Termination, Category 3B (For MIL-C-83733 Connectors)
  NOV 2011 / A
AS39029/56A
Contacts, Electrical Connector, Socket, Crimp Removable (For MIL-C-38999 Series I, III, and IV Connectors)
  NOV 2011 / A
AS9390C
Pin, Straight, Headless, Dowel - CRES, UNS S66286, Standard and Oversize
  NOV 2011 / C
AS85049/44A
Connector Accessories, Electrical, Strain, Relief, Straight Category 4C (For MIL-C-83733 Connectors)
  NOV 2011 / A
AS100B
Fitting, Cross, Short Flareless
  NOV 2011 / B
AS4669B
Fitting, Elbow, 90°, Bulkhead, Short Flareless
  NOV 2011 / B
AS4662B
Fitting, Plug, Short Flareless
  NOV 2011 / B
AS4672C
Fitting, Tee, Bulkhead on Run, Short Flareless
  NOV 2011 / C
AS4673B
Fitting, Tee, Bulkhead on Side, Short Flareless
  NOV 2011 / B
AS4671B
Fitting, Tee, Short Flareless
  NOV 2011 / B
AS4664B
Fitting, Union, Bulkhead, Short Flareless
  NOV 2011 / B
AS4663B
Fitting, Union, Short Flareless
  NOV 2011 / B
AS6802
Time-Triggered Ethernet
  NOV 2011
AS7474C
Bolts and Screws, Steel, Corrosion Resistant, UNS S17400 Tensile Strength 140 Ksi Procurement Specification
  OCT 2011 / C
AS92001B
Nut, Hexagon, Drilled, Boss Connection, Aluminum - UNS A92014
  OCT 2011 / B
AS9554C
Screw, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1380-40 UNJF-3A
  OCT 2011 / C
AS22520/38
CRIMPING TOOL, TERMINAL, HAND ACTUATED, WIRE TERMINATION, TYPE II, FOR EXTERNAL POWER PLUG SOCKET CONTACTS AND LUG TERMINAL SIZES 22-10
  OCT 2011
AS22520/43
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION; IN-SERVICE INSPECTION GAGE FOR AS22520/40 CRIMP TOOLS
  OCT 2011
AS81044/8A
Wire, Electric, Crosslinked Polyalkene Insulated, Silver-Coated Copper, Medium Weight, 600-Volt, 150 °C
  OCT 2011 / A
AS22520
Crimping Tools, Wire Termination, General Specification For
  OCT 2011
AS7241A
Washers, Spring Lock, Corrosion Resistant Steel 18Cr - 9Ni (UNS S30200), Procurement Specification for
  OCT 2011 / A
AS3418A
Bolt, Machine, Double Hex Ext Washer Head, Close Tolerance Shank, UNS N07718, .2500-28UNJF-3A (Stress Rupture Resistant)
  OCT 2011 / A
AS3420A
Bolt, Machine, Double Hex Ext Washer Head, Close Tolerance Shank, UNS N07718, .3750-24 UNJF-3A (Stress Rupture Resistant)
  OCT 2011 / A
AS3417A
Bolt, Machine, Double Hex Extended Washer Head, Close Tolerance Shank, UNS N07718, .1900-32 UNJF-3A (Stress Rupture Resistant)
  OCT 2011 / A
ARP711B
Illuminated Signs
  OCT 2011 / B
MA1573A
Nut, Self-Locking, Steel, Class 1100 Mpa/235 °C, MJ Thread Procurement Specification For, Metric
  OCT 2011 / A
AS2094A
Test Methods for Tube-Fitting Assemblies
  OCT 2011 / A
AS85049/18C
Connector Accessories, Electrical, Backshell, Environmental, Straight, RFI/EMI, Category 2B (For MIL-DTL-38999 Series III and IV Connectors)
  OCT 2011 / C
AS39029/94B
Contacts, Electrical Connector, Socket, Crimp Removable, (For MIL-DTL-83527, Connectors)
  OCT 2011 / B
AS20708/94B
Synchro, 60 and 400 Hz, Size 23
  OCT 2011 / B
AS20708/139A
Synchro Control Transmitter, Type 31CX6a
  OCT 2011 / A
AS5382A
Aerospace Cable, Fiber Optic
  OCT 2011 / A
AIR5872
Aerospace Hydraulic Pump Controls
  OCT 2011
AS7477E
Bolts and Screws, Steel, Uns S66286 Tensile Strength 130 Ksi, Procurement Specification
  OCT 2011 / E
ARP5297A
Recommended Qualification Tests for Halogen Miniature Lamps Less Than 35 Watts for Aircraft Applications
  OCT 2011 / A
AS7473B
Bolts and Screws Roll Threaded Procurement Specification For
  OCT 2011 / B
AS85049/60C
Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For AS50151 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3, and MIL-DTL-83723 Series III Connectors)
  SEP 2011 / C
AS22520/17
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION; FOR CRIMP TYPE REMOVABLE CONTACTS, ELECTRIC CONNECTORS
  SEP 2011
AS22520/42
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION; IN-SERVICE INSPECTION GAGE FOR AS22520/41 CRIMP TOOLS
  SEP 2011
AS22520/35
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION; IN-SERVICE INSPECTION GAGES FOR AS22520/34 CRIMP TOOLS
  SEP 2011
AMSR83412A
Rubber, Ethylene-Propylene, Hydrazine Resistant
  SEP 2011 / A
AS9696E
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Corrosion and Heat Resistant Alloyl, UNS N07001, 165 ksi min, .1900-32 UNJF-3A
  SEP 2011 / E
AIR6052
Trimmable Horizontal Stabilizer Actuator Descriptions
  SEP 2011
AS21981
FERRULE, INNER, UNINSULATED, SHIELD TERMINATING , TYPE I, TWO PIECE, CLASS I, FOR SHIELDED CABLES
  SEP 2011
AS81044/5A
Wire, Electric, Crosslinked Polyalkene Insulated, Silver-Coated Copper, Normal Weight, 600-Volt, 150 °C
  SEP 2011 / A
AS3416A
Bolt, Machine-Hexagon Head, PD Shank, UNS N07718, .375-24UNJF-3A (Stress Rupture Resistant)
  SEP 2011 / A
AS3564D
Nut, Self-Locking, Double Hexagon, Solid Film Lubricated, Counterbored 160 ksi, 800 °F, UNS S66286
  AUG 2011 / D
AS22759/48
Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Low Fluoride, Lightweight, 80 Microinch Silver-Coated Copper, 200 °C, 600 Volt
  AUG 2011
AS22759/47
Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Low Fluoride, Lightweight, 80 Microinch Silver-Coated, High-Strength Copper Alloy, 200 °C, 600 Volt
  AUG 2011
AS4914C
Aircraft Fluorescent Lighting Ballast/Fixture Safety Design Standard
  AUG 2011 / C
AIR5060A
Electronic Engine Control Design Guide for Electromagnetic Environmental Effects
  AUG 2011 / A
AS34641
Connector, Receptacle, Electric, Crimp Type, Jam Nut Mounting, Push-Pull Coupling, Series 3 (Class L and E)
  AUG 2011
AS39029/104A
Contacts, Electrical Connector, Concentric Twinax, Pin, Shielded, Size 8 (For MIL-C-28840)
  AUG 2011 / A
AS39029/105A
Contacts, Electrical Connector, Concentric Twinax, Socket, Shielded, Size 8 (For MIL-C-28840)
  AUG 2011 / A
AS39029/99A
Contacts, Electrical Connector, Pin, Crimp Removable, Coaxial, Size 5 (For DOD-C-83527 Connectors)
  AUG 2011 / A
AS39029/100A
Contacts, Electrical Connector, Socket, Crimp Removable, Coaxial, Size 5 (For DoD-C-83527 Connectors)
  AUG 2011 / A
AS3415A
Bolt, Machine-Hexagon Head, PD Shank, UNS N07718,, .3125-24 UNJF-3A (Stress Rupture Resistant)
  AUG 2011 / A
MA3375C
Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specification, Metric
  AUG 2011 / C
AS6446
FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, INTERNAL PORT END ON SIDE, HYDRAULIC,UP TO 1500 PSI
  AUG 2011
AS31391
CONNECTOR, RECEPTACLE, ELECTRIC THRU BULKHEAD, WALL MOUNTING FLANGE, SERIES I (CLASS E)
  AUG 2011
AS31831
COVER, PROTECTIVE, ELECTRIC CONNECTOR, RECEPTACLE, PUSH-PULL COUPLING
  AUG 2011
ARP5289A
Electronic Aeronautical Symbols
  AUG 2011 / A
AS6193
FITTING ASSEMBLY, ELBOW, 45° AXIALLY SWAGED, FEMALE FLARELESS, HYDRAULIC, UP TO 1500 PSI
  AUG 2011
AS6192
FITTING ASSEMBLY, ELBOW, 90°, AXIALLY SWAGED, FEMALE FLARELESS, HYDRAULIC, UP TO 1500 PSI
  AUG 2011
AS6118
FITTING ASSEMBLY, STRAIGHT, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
  AUG 2011
AS6445
FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, BULKHEAD FLARELESS ON THE SIDE, HYDRAULIC, UP TO 1500 PSI
  AUG 2011
AS6194
FITTING ASSEMBLY, TEE, AXIALLY SWAGED, FEMALE FLARELESS ON THE RUN, AXIALLY SWAGED ON THE SIDE, HYDRAULIC, UP TO 1500 PSI
  AUG 2011
AS6195
FITTING ASSEMBLY, TEE, MALE FLARELESS, BULKHEAD FLARELESS ON THE RUN, AXIALLY SWAGED ON THE SIDE, HYDRAULIC, UP TO 1500 PSI
  AUG 2011
AS6105
Fitting, Tee, Standard and Reducer, Flared, 37° Shperical
  AUG 2011
AS8045A
Minimum Performance Standard for Underwater Locating Devices (Acoustic) (Self-Powered)
  AUG 2011 / A
ARP6161
Flight Compartment Glare
  JUL 2011
AS81790A
Connectors, Receptacle, External Electric Power, Aircraft, General Specification For
  JUL 2011 / A
AS20708/39B
Synchro, Control Transformer, Type 19CTB4B
  JUL 2011 / B
AS91111B
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, UNS S66286 130 Ksi Min, .2500-28 UNJF-3A
  JUL 2011 / B
AS91101B
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, UNS S66286, 130 KSI Min, .1900-32 UNJF-3A
  JUL 2011 / B
AS81969
Installing and Removal Tools, Connector Electrical Contact, General Specification For
  JUL 2011
AS20708/68A
Synchro, Torque Differential Transmitter, Type 31TDX6C
  JUL 2011 / A
AS1730D
Coupling, Fuel, Rigid, Threaded Type
  JUL 2011 / D
AS6122
FITTING ASSEMBLY, STRAIGHT, BULKHEAD, FLARELESS, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
  JUL 2011
AS6158
FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, FEMALE FLARELESS ON THE BRANCH, HYDRAULIC, UP TO 1500 PSI
  JUL 2011
AS6123
FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, MALE FLARELESS ON THE BRANCH, HYDRAULIC, UP TO 1500 PSI
  JUL 2011
AS6458
FITTING ASSEMBLY, TEE, AXIALLY SWAGED TO FEMALE FLARELESS ON THE RUN, FEMALE FLARELESS ON THE SIDE, HYDRAULIC, UP TO 1500 PSI
  JUL 2011
AS6159
FITTING ASSEMBLY, TEE, AXIALLY SWAGED TO FEMALE FLARELESS ON THE RUN, MALE FLARELESS ON SIDE, HYDRAULIC, UP TO 1500 PSI
  JUL 2011
AS6457
FITTING ASSEMBLY, TEE, AXIALLY SWAGED TO MALE FLARELESS ON THE RUN, MALE FLARELESS ON THE SIDE, HYDRAULIC, UP TO 1500 PSI
  JUL 2011
AS6117
FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
  JUL 2011
AS6120
FITTING ASSEMBLY,ELBOW, 45°, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
  JUL 2011
AS6115
FITTING ASSEMBLY,STRAIGHT, MALE FLARELESS, AXIALLLY SWAGED, HYDRAULIC, UP TO 1500 PSI
  JUL 2011
AS1985D
Fitting, Assembly, Adapter Ring Locked Port Connection to Flared Tube End
  JUL 2011 / D
AS25066
CONDUIT ASSEMBLY, NUT, FLEXIBLE, RADIO FREQUENCY SHIELDING
  JUL 2011
AS25064A
Conduit, Flexible, Radio Frequency Shielding
  JUL 2011 / A
AS85049/80C
Connector Accessories, Electrical, Dummy Contact, Sizes 16, 12 and 8, Category 7 (For MIL-DTL-38999 Connectors)
  JUL 2011 / C
AS22759/49
Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Low Fluoride, Normal Weight, 80 Microinch Silver-Coated, High-Strength Copper Alloy, 200 °C, 600 Volt
  JUL 2011
AS6119
Fitting Assembly, Elbow, 90°, Axially Swaged, Hydraulic, Up to 1500 PSI
  JUL 2011
AS6103
Fitting, Cross, Standard and Reducer, 37° Spherical, Flared
  JUL 2011
AIR5277A
Aerospace Fluid Power - Waste Reduction Practices for Used Phosphate Ester Aviation Hydraulic Fluid
  JUN 2011 / A
AS8034B
Minimum Performance Standard for Airborne Multipurpose Electronic Displays
  JUN 2011 / B
AS641A
Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flared, Straight to 45°
  JUN 2011 / A
AS3414A
Bolt, Machine-Hexagon Head, PD Shank, UNS N07718, .250-28UNJF-3A (Stress Rupture Resistant)
  JUN 2011 / A
AS643A
Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flared, 45° to 45°
  JUN 2011 / A
AS645A
Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flared, 90° to 90°
  JUN 2011 / A
AS652C
Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, 90° to 90°
  JUN 2011 / C
AS647C
Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, Straight to Straight
  JUN 2011 / C
AS81935/8
Bearing, Plain, Rod End, Self Aligning, Self Lubricating, Narrow, Externally Threaded,Steel, Corrosion Resistant (CRES) -65 to +325 °F
  JUN 2011
AS81935/9A
Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Narrow, Internally Threaded, Corrosion Resistant (CRES) -65 to +325 °F
  JUN 2011 / A
AS81935/6A
Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Wide, Externally Threaded, Steel, Corrosion Resistant (CRES) -65 to +325 °F
  JUN 2011 / A
AS81935/7A
Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Wide, Internally Threaded, Steel, Corrosion Resistant (CRES) -65 to +325 °F
  JUN 2011 / A
AS81935/5A
Bearing, plain, rod end, self-aligning, self-lubricating, narrow, internally threaded, -65°F to +325°F
  JUN 2011 / A
AS81935/1A
Bearing, plain, rod end, self-aligning, self-lubricating, wide, externally threaded, -65°F to +325°F
  JUN 2011 / A
AS81935/2B
Bearing, plain, rod end, self-aligning, self-lubricating, wide, internally threaded, -65°F to +325°F
  JUN 2011 / B
AS81935C
Bearings, Plain, Rod End, Self-Aligning, Self-Lubricating, General Specification For (-65 to +325 °F)
  JUN 2011 / C
AS39029/11A
Contacts, Electrical Connector, Pin, Crimp-Removable (For AS81659 Series 2 Connectors)
  JUN 2011 / A
AS39029/12A
Contacts, Electrical Connector, Socket, Crimp-Removable (For AS81659 Series 2 Connectors)
  JUN 2011 / A
AIR6448
Gaining Approval for Seats with Integrated Electronics in Accordance with AC21-49 Option 7b
  JUN 2011
AS644A
Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flared, 45° to 90°
  JUN 2011 / A
AS642A
Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flared, Straight to 90°
  JUN 2011 / A
AS640A
Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flared, Straight to Straight
  JUN 2011 / A
AS650C
Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, 45° to 45°
  JUN 2011 / C
AS651C
Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, 45° to 90°
  JUN 2011 / C
AS648C
Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, Straight to 45°
  JUN 2011 / C
AS649C
Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, Straight to 90°
  JUN 2011 / C
AIR4487A
Investigation of Silver Plated Conductor Corrosion (Red Plague)
  JUN 2011 / A
AS8017C
Minimum Performance Standard for Anticollision Light Systems
  JUN 2011 / C
AS1065A
Quality and Serviceability Requirements for Aircraft Cylinder Assemblies Charged With AviatorS Breathing Oxygen
  JUN 2011 / A
AS70991B
Terminals: Lug and Splice, Crimp Style, Aluminum, For Aluminum Aircraft Wire
  JUN 2011 / B
AS3611A
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cobalt-Nickel Alloy UNS R30159, 260 Ksi Min
  JUN 2011 / A
AS85049/87C
Connector Accessories, Electrical, Backshell, 90°, Self-Locking, Shield Band Termination (RFI/EMI), Shrink Sleeve Accommodation, Category 3B (For MIL-DTL-38999 Series I and II Connectors)
  JUN 2011 / C
AS85049/132
Connector Accessories, Fiber Optic Backshell 45°, Self-Locking Category 3B for MIL-DTL-38999 Series III & SAE AS5590/1 Connectors
  JUN 2011
AS6093
FITTING, 37° SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 90°
  JUN 2011
ARP5021A
Oxygen Cylinder Installation Guide
  JUN 2011 / A
AS6094
FITTING, 37° SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 45°
  MAY 2011
AS6092
FITTING, 37° SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 75°
  MAY 2011
AS6095
FITTING, 37° SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, TEE
  MAY 2011
AS6075
FITTING, BOLT, FLARED, 37° SPHERICAL
  MAY 2011
AS6098
Fitting, Tee, Standard and Reducer, Bulkhead on Run, Internal on Side, Flared, 37° Spherical
  MAY 2011
AIR6082
Calculations to Determine Dimensions for Backup Rings to AS5781, AS5782, AS5860, AS5861
  MAY 2011
ARP5526C
Aircraft Seat Design Guidance and Clarifications
  MAY 2011 / C
AS20708/20A
Synchro, Control Transmitter, Type 15CX6C
  MAY 2011 / A
AS85049/32B
Connector accessories, electrical, backshell, nonenvironmental, 90°, shielded termination, category 3C (for MIL-C-38999 Series I and II connectors)
  MAY 2011 / B
AS5272E
Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification
  MAY 2011 / E
AS85049/47D
Connector Accessories, Electrical, Strain Relief, 90°, Self-Locking and Nonself-Locking, Category 4B (for MIL-C-38999 Series I and II Connectors)
  MAY 2011 / D
AS39029/31B
Contacts, Electrical Connector, Pin, Crimp Removable (For MIL-DTL-26482 Series 1, MIL-DTL-26500 and MIL-DTL-26518 Connectors)
  MAY 2011 / B
AS39029/32B
Contacts, Electrical Connector, Socket, Crimp Removable (For MIL-DTL-26482 Series 1, MIL-DTL-26500 and MIL-DTL-26518 Connectors)
  MAY 2011 / B
AS85049/96C
Connector Accessories, Electrical, Mounting Device Flange Type, Category 7, 1/4 Perimeter
  MAY 2011 / C
AS85049/94C
Connector Accessories, Electrical, Mounting Device, Flange Type, Category 7, Full Perimeter
  MAY 2011 / C
ARP6253
LEDs and Aircraft Applications
  APR 2011
AS4167B
Wrenches; Flared Nut, Crowfoot, 12-Point Non-distorting
  APR 2011 / B
AS81824/12
SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE, TIN-COATED COPPER, INSULATED, ENVIRONMENT RESISTANT, CLASS 1, 150 ºC, HEATLESS SEALING
  APR 2011
AS85049/138A
Connector Accessories, Electrical, Cap, Dust, Plastic, Category 9
  APR 2011 / A
AS20218A
Bearing, Ball, Anti-Friction, Airframe
  APR 2011 / A
AIR4830A
Aircraft Tire Pressure Monitoring Systems
  APR 2011 / A
AS85049/95C
Connector Accessories, Electrical, Mounting Device, Flange Type, Category 7, 3/4 Perimeter
  APR 2011 / C
AS85896A
Ladder, Aircraft Maintenance, Aluminum, Three-Way Combination (Step, Straight and Extension), General Specification For
  APR 2011 / A
AS85049/50B
Connector Accessories, Electrical, Strain Relief, 90°, Category 4C (for MIL-DTL-24308 Connectors)
  APR 2011 / B
AS31021A
Connector, Receptacle, Electric, Box Mounting, Solder Contacts, AN Type
  APR 2011 / A
AS7788A
Panels, Information, Integrally Illuminated
  APR 2011 / A
AS6146
Nut, Self Locking, Double Hexagon, Reduced Envelope, UNS66286
  MAR 2011
ARP6404
Aircraft Tire Electrical Resistance Test
  MAR 2011
AS39029/2A
Contacts, Electrical Connector, Pin, Crimp Removable (For MIL-C-81659 Series 1 Connectors)
  MAR 2011 / A
AS39029/7A
Contacts, Electrical Connector, Pin, Crimp Removable, Shielded (For MIL-C-26482-Series 2 and MIL-C-81703 Series 3 Connectors)
  MAR 2011 / A
AS39029/3A
Contacts, Electrical Connector, Socket, Crimp Removable (For MIL-C-81659 Series 1 Connectors)
  MAR 2011 / A
AS39029/8A
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded (For MIL-C-26482 Series 2 and MIL-C-81703 Series 3 Connectors)
  MAR 2011 / A
AS85049/5B
Connector Accessories, Electrical, Backshell, Cable Sealing, Straight, Step-Down, Category 1A (For MIL-DTL-22992 Connectors, Classes C, J, and R)
  MAR 2011 / B
AS85049/86B
Connector Accessories, Electrical, Backshell, 45°, Self-Locking, Shield Band Termination (RFI/EMI), Shrink Sleeve Accommodation, Category 3B (For MIL-DTL-38999 Series I and II Connectors)
  MAR 2011 / B
AS5368C
Fitting Assembly, Adapter - Ring Locked Port Connection to Flared Tube End, 3000 psi
  MAR 2011 / C
AS1986E
Fitting Assembly, Adapter, Ring Locked Port Connection to Beam Seal 4000 Psi and 5000 Psi
  MAR 2011 / E
AS83519B
Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant General Specification For
  MAR 2011 / B
AS6099
Fitting, Elbow, 90°, Standard and Reducer, Flared, 37° Spherical
  MAR 2011
AS85049/111C
Connector Accessories, Electrical Backshell, 90°, Self Locking and Non-Self Locking, Pre-Attached Shield Termination (RFI/EMI), Boot Accommodation, Category 3B (For MIL-DTL-83723 Series III, AS50151 (Series I & II), AS81703 Series III, and MIL-DTL-26482 Series II Connectors)
  MAR 2011 / C
AS85049/117C
Connector Accessories, Electrical Backshell, 90°, Self Locking and Non-Self Locking, Pre-Attached Shield Termination (RFI/EMI), Boot Accommodation, Category 3B For MIL-DTL-38999 Series III and IV Connectors
  MAR 2011 / C
AS85049/114C
Connector Accessories, Electrical Backshell, 90°, Self-Locking and Non-Self Locking, Pre-Attached Shield Termination (RFI/EMI), Boot Accommodation, Category 3B (For MIL-DTL-38999 Series I and II Connectors)
  MAR 2011 / C
AS85049/109C
Connector Accessories, Electrical Backshell, Straight, Non-Self Locking and Self Locking, Pre-Attached Shield Termination (RFI/EMI), Boot Accommodation, Category 3B (For MIL-DTL-83723 Series III, AS50151 (Series I & II), AS81703 Series III, and MIL-DTL-26482 Series II Connectors)
  MAR 2011 / C
AS85049/112C
Connector Accessories, Electrical Backshell, Straight, Self Locking and Non-Self Locking, Pre-Attached Shield Termination (RFI/EMI), Boot Accommodation, Category 3B (For MIL-DTL-38999 Series I and II Connectors)
  MAR 2011 / C
AS85049/115C
Connector Accessories, Electrical Backshell, Straight, Self Locking and Non-Self Locking, Pre-Attached Shield Termination (RFI/EMI), Boot Accommodation, Category 3B (For MIL-DTL-38999 Series III and IV Connectors)
  MAR 2011 / C
AS85049C
Connector Accessories, Electrical General Specification For
  MAR 2011 / C
AS4716B
Gland Design, O-Ring and Other Elastomeric Seals
  MAR 2011 / B
AS27644/1
Bearing, Ball, Airframe, Anti-Friction, Double Row, Heavy Duty, Corrosion Resistant Nitrogen Steel (CREN)
  MAR 2011
AS27646/1
Bearing, Ball, Airframe, Anti-Friction, Extra Light Duty, Corrosion Resistant Nitrogen Steel (CREN)
  MAR 2011
AS21428/1
Bearing, Ball, Airframe, Anti-Friction, Extra Light Duty, Precision, Corrosion Resistant Nitrogen Steel (CREN)
  MAR 2011
AS27640/1
Bearing, Ball, Airframe, Anti-Friction, Heavy-Duty, Corrosion Resistant Nitrogen Steel (CREN)
  MAR 2011
AS27641/1
Bearing, Ball, Airframe, Anti-Friction, Intermediate Duty, Corrosion Resistant Nitrogen Steel (CREN)
  MAR 2011
AS27643/1
Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Double Row, Heavy Duty, Corrosion Resistant Nitrogen Steel (CREN)
  MAR 2011
AS27645/1
Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Light and Heavy Duty, Corrosion Resistant Nitrogen Steel (CREN)
  MAR 2011
AS3618
Cable, Safety, Ferrule, Elongated, Corrosion and Heat Resistant Steel, UNS S32100
  MAR 2011
AS26574A
Circuit Breaker-Trip-Free, Push-Pull, 1/2 Thru 20 Amp, Type I
  MAR 2011 / A
AS34501B
Connectors, Receptacle, Electrical, Wall Mounting, Rear Release, Crimp Contact, AN Type
  MAR 2011 / B
AS7928B
Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For
  MAR 2011 / B
AS85049/62A
Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For MIL-DTL-38999 Series I and II Connectors)
  MAR 2011 / A
AS85049/42B
Connector Accessories, Electrical, Nonenvironmental, Strain Relief, Straight, Category 4A (For AS50151 Solder Type, V Thread of MS310X Classes A, B, C or K Connectors)
  MAR 2011 / B
AS85049/83B
Connector Accessories, Electrical, Backshell, 45°, Self- Locking, Shield, Band Termination (RFI/EMI), Shrink Sleeve Accommodation, Category 3B (For AS50151 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3 and MIL-DTL-83723 Series III Connectors)
  MAR 2011 / B
AS85049/84B
Connector Accessories, Electrical, Backshell, 90°, Self-Locking, Shield Band Termination (RFI/EMI), Shrink Sleeve Accommodation, Category 3B (For AS50151 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3 and MIL-DTL-83723 Series III Connectors)
  MAR 2011 / B
AS85049/78B
Connector Accessories, Electrical, Backshell, Environmental, 45°, Shield Termination, Category 2B, Nonself-Locking (MIL-DTL-38999 Series III and IV Connectors)
  MAR 2011 / B
AS85049/79B
Connector Accessories, Electrical, Backshell, Environmental, 90°, Shield Termination, Category 2B, Nonself-Locking (MIL-DTL-38999 Series III and IV Connectors)
  MAR 2011 / B
AS85049/17B
Connector Accessories, Electrical, Backshell, Environmental, Straight, Shield Termination, Category 2B (For MIL-DTL-38999 Series I and II Connectors)
  MAR 2011 / B
AS85049/36B
Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Shield Termination, Category 3B (For MIL-DTL-27599 Series I and MIL-DTL-38999 Series I and II Connectors)
  MAR 2011 / B
AS85049/85B
Connector Accessories, Electrical, Backshell, Straight, Self-Locking, Shield Band Termination (RFI/EMI), Shrink Boot Accommodation, Category 3B (For MIL-DTL-38999 Series I and II Connectors)
  MAR 2011 / B
AS85049/61B
Connector Accessories, Electrical, Ring, Potting Boot, Category 5 (For MIL-DTL-27599 Connectors)
  MAR 2011 / B
AS85049/58B
Connector Accessories, Electrical, Ring, Potting Boot, Category 5 (Mil-DTL-38999 Series I and II Connectors)
  MAR 2011 / B
AS85049/46B
Connector Accessories, Electrical, Strain Relief, 90°, Nonmetallic, Category 4C (for MIL-C-27599 Series I and MIL-DTL-38999 Series I and II Connectors)
  MAR 2011 / B
AS85049/55C
Connector Accessories, Electrical, Strain Relief, Nonenvironmental, 90°, Self-Locking and Non-self-Locking, Category 4C (for MIL-C-5015 Crimp, MIL-C-26482 Series 2, MIL-C- 81703 Series 3, and MIL-C-83723 Series III Connectors)
  MAR 2011 / C
AS85049/53B
Connector Accessories, Electrical, Strain Relief, Nonenvironmental, Straight, Category 4C (For AS50151 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3, and MIL-DTL-83723 Series III Connectors)
  MAR 2011 / B
AS85049/56A
Connector Accessories, Electrical, Strain Relief, Straight, Category 4C (MIL-DTL-38999 Series I and II Connectors)
  MAR 2011 / A
AS85049/77B
Connector accessories, electrical, backshell, environmental, 45°, shield termination, category 2B, nonself-locking (MIL-C-38999 Series I and II connectors)
  MAR 2011 / B
AS85049/69B
Connector Accessories, Electrical, Adapter, Shrinkboot, Category 5 (MIL-DTL-38999 Series III and IV Connectors)
  MAR 2011 / B
AS85049/41B
Connector Accessories, Electrical, Non-Environmental, Strain Relief, Straight, Category 4C (For AS50151 General Duty 'A' Endbell and AS85049 Accessories)
  MAR 2011 / B
AS85049/45B
Connector Accessories, Electrical, Strain Relief, Straight, Nonmetallic, Category 4c (For MIL-DTL-27599 Series I and MIL-DTL-38999 Series I and II Connectors)
  MAR 2011 / B
AS85049/54B
Connector accessories, electrical, strain relief, nonenvironmental, 45°, category 4C (for MIL-C-5015 crimp, MIL- C-26482 series 2, MIL-C-81703 series 3, and MIL-C-83723 series III connectors)
  MAR 2011 / B
AMSP83461/1B
Packing, Preformed, Petroleum Hydraulic Fluid Resistant Improved Performance at 275°F (135°C) Sizes and Tolerances
  MAR 2011 / B
AS5729
O-Ring Molded from AMS7379 (Fluorocarbon) Material
  MAR 2011
AS6038A
Bearing, Ball, Bellcrank, Antifriction, Airframe
  MAR 2011 / A
AS20708/15A
Snychro, Control Transformer, Type 15CT4C
  FEB 2011 / A
AS20708/16A
Synchro, Control Differential Transmitter, Type 15CDX4D
  FEB 2011 / A
AS20708/22A
Synchro, Control Differential Transmitter, Type 15CDX6C
  FEB 2011 / A
AS20708/30A
Synchro, Control Differential Transmitter, Type 18CDX4C
  FEB 2011 / A
AS20708/36A
Synchro, Control Differential Transmitter, Type 18CDX6D
  FEB 2011 / A
AS20708/54A
Synchro, Control Differential Transmitter, Type 23CDX6C
  FEB 2011 / A
AS20708/47A
Synchro, Control Differential Transmitter, Type 23CXD4C
  FEB 2011 / A
AS20708/9A
Synchro, Control Differential Transmitter, Type 26V-11CDX4C
  FEB 2011 / A
AS20708/1A
Synchro, Control Transformer, Type 11CT4E
  FEB 2011 / A
AS20708/21A
Synchro, Control Transformer, Type 15CT6D
  FEB 2011 / A
AS20708/25A
Synchro, Control Transformer, Type 16CTB4B
  FEB 2011 / A
AS20708/29A
Synchro, Control Transformer, Type 18CT4C
  FEB 2011 / A
AS20708/34A
Synchro, Control Transformer, Type 18CT6D
  FEB 2011 / A
AS20708/46A
Synchro, Control Transformer, Type 23CT4C
  FEB 2011 / A
AS20708/53A
Synchro, Control Transformer, Type 23CT6D
  FEB 2011 / A
AS20708/7A
Synchro, Control Transformer, Type 26V-11CT4D
  FEB 2011 / A
AS20708/2A
Synchro, Control Transmitter, Type 11CX4E
  FEB 2011 / A
AS20708/14A
Synchro, Control Transmitter, Type 15CX4D
  FEB 2011 / A
AS20708/28A
Synchro, Control Transmitter, Type 18CX4D
  FEB 2011 / A
AS20708/33A
Synchro, Control Transmitter, Type 18CX6C
  FEB 2011 / A
AS20708/45A
Synchro, Control Transmitter, Type 23CX4D
  FEB 2011 / A
AS20708/52A
Synchro, Control Transmitter, Type 23CX6D
  FEB 2011 / A
AS20708/8A
Synchro, Control Transmitter, Type 26V-11CX4C
  FEB 2011 / A
AS20708/49A
Synchro, Differential Receiver, Type 23TDR4B
  FEB 2011 / A
AS20708/17A
Synchro, Torque Differential Transmitter, Type 15TDX4C
  FEB 2011 / A
AS20708/31A
Synchro, Torque Differential Transmitter, Type 18TDX4C
  FEB 2011 / A
AS20708/48A
Synchro, Torque Differential Transmitter, Type 23TDX4C
  FEB 2011 / A
AS20708/19A
Synchro, Torque Receiver Transmitter, Type 15TRX4A
  FEB 2011 / A
AS20708/23A
Synchro, Torque Receiver Transmitter, Type 15TRX6A
  FEB 2011 / A
AS20708/32A
Synchro, Torque Receiver Transmitter, Type 18TRX4A
  FEB 2011 / A
AS20708/35A
Synchro, Torque Receiver Transmitter, Type 18TRX6B
  FEB 2011 / A
AS20708/50A
Synchro, Torque Receiver Transmitter, Type 23TRX4A
  FEB 2011 / A
AS20708/3A
Synchro, Torque Receiver, Type 11TR4C
  FEB 2011 / A
AS20708/5A
Synchro, Torque Receiver, Type 26V-11TR4C
  FEB 2011 / A
AS20708/4A
Synchro, Torque Transmitter, Type 11TX4C
  FEB 2011 / A
AS20708/6A
Synchro, Torque Transmitter, Type 26V-11TX4C
  FEB 2011 / A
AS81659/61A
Connectors, Electrica, Rectangular, Receptacle, Crimp Contacts, (Single Insert, Type III, Class 1, (-65°C to +125°C), Series 2, Shell Designator A)
  FEB 2011 / A
AS22759/180
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, TIN-COATED COPPER CONDUCTOR, 150 ºC, 600 VOLTS
  FEB 2011
AS85485A
Cable, Electric, Filter Line, Radio Frequency Absorptive
  FEB 2011 / A
AS81659/71A
Connectros, Electrical, Rectangular, Receptacle, Crimp Contacts, (Dual Insert, Type IV, Class 1, (-65 °C to +125 °C), Series 2, Shell Designator A, Clinch Nut Mount)
  FEB 2011 / A
AS85049/23A
Connector Accessories, Electrical, Backshell, Nonenvironmental, 45°, Shield Termination, Category 3A (For AS50151 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3, and MIL-DTL-83723 Series III Connectors)
  FEB 2011 / A
AS85049/25A
Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Shield Termination, Category 3A (For AS50151 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3, and MIL-DTL-83723 Series III Connectors)
  FEB 2011 / A
AS85049/126B
Connector Accessories, Electrical, Strain Relief, 90° Self- Locking and Non-Self-Locking, Category 4C (for MIL-DTL-38999 Series III and IV Connectors
  FEB 2011 / B
AS85049/123B
Connector Accessories, Electrical, Strain Relief, 90° Self- Locking, and Non-Self-Locking, Category 4C (for MIL-DTL-38999 Series I and II Connectors)
  FEB 2011 / B
AS85049/120A
Connector Accessories, Electrical, Strain Relief, 90° Self-Locking, Category 4B (for MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3, and MIL-DTL-83723 Series III Connectors)
  FEB 2011 / A
AS85049/63C
Connector Accessories, Electrical, Strain Relief, 90°, Self-Locking and Nonself-Locking, Category 4C (MIL-C-38999 Series I and II Connectors)
  FEB 2011 / C
AS85049/57C
Connector accessories, electrical, strain relief, 45°, self-locking and nonself-locking, category 4C (MIL-C-38999 Series I and II connectors)
  FEB 2011 / C
AS85049/15B
Connector, accessories, electrical, strain relief, 45°, self-locking, category 4C (for MIL-C-38999 Series III and IV connectors)
  FEB 2011 / B
AS85049/16B
Connector, accessories, electrical, strain relief, 90°, self-locking, category 4C (for MIL-C-38999 Series III and IV connectors)
  FEB 2011 / B
AIR81C
Importance of Physical and Chemical Properties of Aircraft Hydraulic Fluids
  FEB 2011 / C
AS5258/2A
Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle
  FEB 2011 / A
AS5258/4A
Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle, Low Profile
  FEB 2011 / A
AS5258/6A
Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle, Low Profile, Miniature
  FEB 2011 / A
AS5258/1A
Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight
  FEB 2011 / A
AS5258/3A
Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight, Low Profile
  FEB 2011 / A
AS5258/5A
Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight, Low Profile, Miniature
  FEB 2011 / A
AS5258/8A
Insulating Components, Molded, Electrical, Heat Shrinkable, Strain Relief and Sealing, Y
  FEB 2011 / A
AS5258/9A
Insulating Components, Molded, Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, 1 to 3
  FEB 2011 / A
AS5258/10A
Insulating Components, Molded, Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, T
  FEB 2011 / A
AS5258/7A
Insulating Components, Molded, Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, T
  FEB 2011 / A
AS85049/26B
Connector Accessories, Electrical, Backshell, Non-Environmental, Straight, Shield Termination, Category 3B (For AS50151 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3 and MIL-DTL-83723 Series III Connectors)
  FEB 2011 / B
AS85049/3A
Connector Accessories, Electrical, Backshell, Cable Sealing, Straight, Category 1A, (For MIL-C-22992 Connectors, Classes C, J, and R)
  FEB 2011 / A
AS85049/21B
Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Category 3B (For MIL-DTL-38999 Series III and IV Connectors)
  FEB 2011 / B
AS85049/19B
Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, RFI/EMI, Category 3B (For MIL-DTL-38999 Series III and IV Connectors)
  FEB 2011 / B
AIR5913
Landing Gear Shock Strut Heat Damage
  FEB 2011
AS39029/83A
Contacts, Electrical Connector, Pin, Crimp Removable (for MIL-DTL-28840 Connectors)
  FEB 2011 / A
AS39029/84A
Contacts, Electrical Connector, Socket, Crimp Removable (For MIL-DTL-28840 Connectors)
  FEB 2011 / A
AS7469A
Bolts and Screws, Uns N07041 Nickel Alloy, Corrosion and Heat Resistant, 155 Ksi, Procurement Specification
  FEB 2011 / A
AS4405A
Fitting Assembly, Adapter, Reducer and Nonreducer, Internal Flare to Flared Tube
  FEB 2011 / A
AS4407A
Fitting Assembly, Elbow 90°, Reducer and Nonreducer, Internal Flare to Flared Tube
  FEB 2011 / A
AS4410A
Fitting Assembly, Tee, Reducer and Nonreducer, Internal Flare on Run, to Flared Tube
  FEB 2011 / A
AS4411A
Fitting Assembly, Tee, Reducer and Nonreducer, Internal Flare on Side to Flared Tube
  FEB 2011 / A
AS4406A
Fitting Assembly, Union, Reducer and Nonreducer, Internal Flare
  FEB 2011 / A
AS3326A
Nut, Self-Locking-Captive Washer, Steel
  FEB 2011 / A
AS9552C
Bracket, Flat, Cres UNS S32100
  FEB 2011 / C
AS39029/107B
Contacts, Electrical Connector, Pin, Crimp-Removable (For MIL-DTL-38999 Series I, III and IV, MIL-DTL-55302 and AS29600 Series A Connectors)
  FEB 2011 / B
AS39029/106B
Contacts, Electrical Connector, Socket, Crimp-Removable (For MIL-DTL-38999 Series I, III and IV and MIl-DTL-55302 and AS29600 Series A Connectors)
  FEB 2011 / B
AS25486A
Connector, Plug, Attachable, External Electric Power, Aircraft, 115/200 Volt, 400 Hertz
  JAN 2011 / A
AS81714/23A
Terminal Junction System, Terminal Junction Blocks, Electronic, In-Line Junctions, Integral Fuse, Series I
  JAN 2011 / A
AS85049/48B
Connector Accessories, Electrical, Strain Relief, Straight, Category 4C (For MIL-DTL-24308 Connectors)
  JAN 2011 / B
AS85049/6B
Connector Accessories, Electrical, Backshell, Environmental, Cable Sealing, 45°, Shield Termination, Category 1A (For AS50151 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3, and MIL-DTL-83723 Series III Connectors)
  JAN 2011 / B
AS85049/10B
Connector Accessories, Electrical, Backshell, Environmental, Cable Sealing, Straight, Shield Termination, Category 1A (For AS50151 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3, and MIL-DTL-83723 Series III Connectors)
  JAN 2011 / B
AS85049/7B
Connector accessories, electrical, backshell, environmental, cable sealing, 45°, category 1A (for MIL-C-5015 crimp, MIL-C- 26482 series 2, MIL-C-81703 series 3, and MIL-C-83723 series III connectors)
  JAN 2011 / B
AS50861A
Wire, Electric, Polyvinyl Chloride Insulated, Copper Or Copper Alloy
  JAN 2011 / A
AS85049/124B
Connector Accessories, Electrical, Strain Relief, Straight Self-Locking, Category 4C (For MIL-DTL-38999 Series III and IV Connectors
  JAN 2011 / B
AS85049/121B
Connector Accessories, Electrical, Strain Relief, Straight Self-Locking, and Non-Self-Locking, Category 4C (For MIL-DTL- 38999 Series I and II Connectors)
  JAN 2011 / B
AS85731A
Fastener, Positive Locking, Electronic Equipment, General Specification For
  JAN 2011 / A
AS85731/1A
Fastener, Electronic Equipment, Positive Self-Locking
  JAN 2011 / A
AS85049/29B
Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Category 3B (For MIL-DTL-38999 Series I and II Connectors)
  JAN 2011 / B
AS85049/20B
Connector Accessories, Electrical, Backshell, Straight, RFI/EMI Category 3B (For MIL-DTL-38999 Series III and IV Connectors)
  JAN 2011 / B
AS85049/52C
Connector Accessories, Electrical, Strain Relief, Nonenvironmental, Self-Locking and Non-Self-Locking, Straight, Category 4B (For MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3, and MIL-DTL-83723 Series III Connectors)
  JAN 2011 / C
AS85049/104B
Connectors, Accessories, Composite, RFI/EMI, Electrical, Strain Relief, 45°, Self-Locking, Category 3C (For MIL-DTL- 38999 Series III and IV Connectors)
  JAN 2011 / B
AS85049/105B
Connectors, Accessories, Composite, RFI/EMI, Electrical, Strain Relief, 90°, Self-Locking, Category 3C (For MIL-DTL- 38999 Series III and IV Connectors)
  JAN 2011 / B
AS85049/37A
Connector Accessories, Electrical, Backshell, Nonenvironmental, Split 90°, EMI/RFI Shielded Termination, Category 3B (For MIL-C-38999 Series I and II Connectors)
  JAN 2011 / A
AS85049/30A
Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Individual Shielded Wire Termination, Category 3B (For MIL-C-38999 Series I and II Connectors)
  JAN 2011 / A
AS85049/14B
Connector Accessories, Electrical, Backshell, Straight, Non-Self-Locking and Self-Locking, Category 3B (For MIL-DTL-38999 Series III and IV Connectors)
  JAN 2011 / B
AS85049/49C
Connector Accessories, Electrical, Strain Relief, Straight, Self-Locking and Non-Self-Locking, Category 4C (MIL-DTL-38999 Series I and II Connectors)
  JAN 2011 / C
AS85049/76B
Connector accessories, electrical, backshell, environmental, 90°, shield termination, category 2B, nonself-locking (MIL-C-38999 Series I and II connectors)
  JAN 2011 / B
AS666D
Cavity Design and O-Ring Selection for Static Seal Use in Aircraft Tubeless Tire Wheels
  JAN 2011 / D
AS39029/85A
Contacts, Electrical Connector, Pin, Crimp Removable, Thermocouple (For AS50151 AS34501 Series and MIL-DTL-83723 Series II Connectors)
  JAN 2011 / A
AS39029/86A
Contacts, Electrical Connector, Socket, Crimp Removable, Thermocouple (For AS50151 AS34501 Series and MIL-DTL-83723 Series II Connectors)
  JAN 2011 / A
AS81914/10
Tubing, Plastic, Extra Flexible, Convoluted, Helical, Perfluoroalkoxy (PFA), Close Convolution
  JAN 2011
AS81914/7
Tubing, Plastic, Flexible, Convoluted with Integral Braid (S)
  JAN 2011
AIR1922A
Aerospace - System Integration Factors That Affect Hydraulic Pump Life
  JAN 2011 / A
AS3413A
Bolt, Machine-Hexagon Head, PD Shank, UNS N07718, .190-32UNJF-3A (Stress Rupture Resistant)
  JAN 2011 / A
AS5440A
Hydraulic Systems, Military Aircraft, Design and Installation Requirements for
  JAN 2011 / A
AIR5938
Information on Hard Landings
  JAN 2011
AIR1871C
Lessons Learned From Developing, Implementing, and Operating a Health Management System for Propulsion and Drive Train Systems
  JAN 2011 / C
AS483C
Skid Control Equipment
  JAN 2011 / C
AS81914
Tubing, Plastic, Flexible, Convoluted, Conduit, General Specification For
  JAN 2011
ARP4754A
Guidelines for Development of Civil Aircraft and Systems
  DEC 2010 / A
AS7974A
Cable Assemblies and Attachable Plugs, External Electrical Power, Aircraft, General Specification For
  DEC 2010 / A
AS81582/2A
Connector, Plug, Electric, Bayonet Coupling, Lanyard Release, RFI Shielded, Crimp-Type Contacts, Class E
  DEC 2010 / A
AS34661A
Connector, Receptacle, Electric, Hermetic, Solder Type, Box Mounting, Push-Pull Coupling, Series 3 (Class H)
  DEC 2010 / A
AMSR6855B
Elastomer, Synthetic, Sheets, Strips, Molded or Extruded Shapes, General Specification for
  DEC 2010 / B
AS24586A
Spring, Helical, Extension: For Loads Below 30 Pounds
  DEC 2010 / A
AS34121B
Connectors, Receptacle, Electric, Wall Mounting, Front Release, Crimp Contact, AN Type - With Accessory Threads
  DEC 2010 / B
AS5457A
Aerospace Standard for Hand-Held Wire Stripper Tools
  DEC 2010 / A
AS21984A
Circuit Breaker-Aircraft, Trip-Free Push-Pull, 3-Phase, 5 Thru 60 Amp., Type I
  DEC 2010 / A
AS39029/92A
Contacts, Electrical Connector, Socket, Crimp Removable (For MIL-PRF-6106 and MIL-DTL-12883/40 and /41 Relay Sockets)
  DEC 2010 / A
AS39029/44B
Contacts, Electrical Connector, Pin, Crimp Removable (For AS50151 Series AS34001 Connectors)
  DEC 2010 / B
AS39029/29B
Contacts, Electrical Connector, Pin, Crimp Removable (for AS50151 Series, AS34501 and MIL-DTL-83723 Series 2 Connectors)
  DEC 2010 / B
AS39029/34B
Contacts, Electrical Connector, Pin, Crimp Removable (for MIL-DTL-28748/3 and MIL-DTL-28748/13 Connectors)
  DEC 2010 / B
AS39029/18B
Contacts, Electrical Connector, Pin, Crimp-Removable (For MIL-C-81511 Series 3 and 4 Connectors)
  DEC 2010 / B
AS39029/45B
Contacts, Electrical Connector, Socket, Crimp Removable (For AS50151 Series AS34001 Connectors)
  DEC 2010 / B
AS39029/5B
Contacts, Electrical Connector, Socket, Crimp Removable (For MIL-DTL-26482 Series 2, AS81703 Series 3, MIL-DTL-83723 Series I and III, and MIL-DTL-83733 Connectors and MIL-DTL-12883/40 and /41 Relay Sockets)
  DEC 2010 / B
AS39029/35B
Contacts, Electrical Connector, Socket, Crimp Removable (for MIL-DTL-28748/3 and MIL-C-28748/13 Connectors)
  DEC 2010 / B
AS39029/10B
Contacts, Electrical Connector, Socket, Crimp Removable, Thermocouple (For MIL-DTL-26482 Series 2, AS81703 Series 3, MIL-DTL-83723 Series I and III, and MIL-DTL-83733 Connectors)
  DEC 2010 / B
AIR6079
Selection of Metallic Spring Energized Seals for Aerospace
  DEC 2010
AS39029/71A
Contacts, Electrical Connector, Pin, Removable, Solderless Wrappost Termination (For MIL-DTL-38999 Series I, II, III and IV, MIL-DTL-24308, MIL-DTL-83733, and MIL-DTL-55302/69 Connectors)
  NOV 2010 / A
AS39029/72A
Contacts, Electrical Connector, Socket, Removable Solderless Wrappost Termination (For MIL-DTL-38999 Series I, II, III, and IV, MIL-DTL-24308, and MIL-DTL-55302/68, /71, and /75 Connectors)
  NOV 2010 / A
AS5857A
Gland Design, O-Ring and Other Elastomeric Seals, Static Applications
  NOV 2010 / A
AS4704C
Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Male to Straight Male
  NOV 2010 / C
AS39029/54A
Contacts, Electrical Connector, Pin, Crimp Removable, Shielded (For MIL-DTL-26500 and MIL-DTL-26518 Connectors)
  NOV 2010 / A
AS1421A
Aerospace Selected Diameter - Pitch Combinations of Metric 60° Screw Threads for Shaft or Bearing Retaining Screw Threads
  NOV 2010 / A
ARP1088B
Aircraft Indicating Systems
  NOV 2010 / B
AS21921C
Nut, Sleeve Coupling, Flareless
  NOV 2010 / C
AIR4071A
Lubricants for Oxygen Use
  NOV 2010 / A
AS85028/1A
Connector, Electric, Rectangular, Individual Contact Sealing, Polarized Center Jackscrew, Plug, Crimp Removable Pin Contacts, Class E
  NOV 2010 / A
AS33481A
Contact Bushing, Electric, Wire Barrel
  NOV 2010 / A
AS4797C
Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Female to 45° Male
  NOV 2010 / C
AS4798C
Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Female to 90° Male
  NOV 2010 / C
AS4796C
Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Female to Straight Male
  NOV 2010 / C
AS4802C
Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Male to 45° Female
  NOV 2010 / C
AS4705C
Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Male to 45° Male
  NOV 2010 / C
AS4803C
Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Male to 90° Female
  NOV 2010 / C
AS4706C
Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Male to 90° Male
  NOV 2010 / C
AS81306
Wiring Installation Tools for Bands and Tiedown Straps
  NOV 2010
AS85028/2A
Connector, Electric, Rectangular, Individual Contact Sealing, Polarized Center Hardware, Receptacle, Crimp Removable Socket Contacts, Class E
  NOV 2010 / A
AS85028/6A
Connector, Electric, Rectangular, Individual Contact Sealing, Polarized Center Jackscrew, Replacement Tool, Wire Seal, Size 16, Crimp Removable Contacts
  NOV 2010 / A
AS39029/48A
Contacts, Electrical Connector, Pin, Crimp Removable (For MIL-C-22992 Class L Connectors)
  NOV 2010 / A
AS39029/49A
Contacts, Electrical Connector, Socket, Crimp Removable (For MIL-C-22992 Class L Connectors)
  NOV 2010 / A
AS81714/63A
Terminal Junction System, Terminal Junction Blocks, Sectional, Grounding Modules, Stud and Flange Type Mounting, Series II
  OCT 2010 / A
AS5756/4A
Cable, Electrical, 600 Volts, Portable, Multiconductor, Ozone Resistant
  OCT 2010 / A
AS5756/3A
Cable, Power, Electrical, 600 Volts, Portable, Multiconductor
  OCT 2010 / A
AS90362A
Connector, Receptacle, External Electric Power, Aircraft, 115/200 Volt, 400 Hertz
  OCT 2010 / A
AS81714/12A
Terminal Junction System, Terminal Junction Blocks, Sectional, Wire In-Line Junctions, Double, Series I
  OCT 2010 / A
AS22759/89C
Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Silver Coated, High Strength or Ultra High Strength Copper, Alloy, 200 °C, 600 Volts
  OCT 2010 / C
ARP6400
Recommended Practice for Processing and Handling Wire and Cable with Silver Plated Conductors and Shields
  OCT 2010
AS39029/28A
Contacts, Electrical Connector, Pin, Crimp Removable, Shielded, Size 12 (For MIL-C-38999 Series I, II, III and IV Connectors)
  OCT 2010 / A
AS39029/75A
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, Size 12 (For MIL-C-38999 Series I, III, and IV Connectors)
  OCT 2010 / A
AS39029/27A
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, Size 12 (For MIL-C-38999 Series II Connectors)
  OCT 2010 / A
AS5545
Nut Coupling, Flareless, Extra Fine Thread, 5080 psi
  OCT 2010
AS39029/17B
Contacts, Electrical Connector, Socket, Crimp Removable (For MIL-C-81511 Series 3 Connectors)
  OCT 2010 / B
AS7928/6A
Terminals, Lug and Splices, Conductor, Crimp Style, Splice, Electric, (Permanent, Type II, Class 1) for 150°C Total Conductor Temperature
  OCT 2010 / A
AIR5552
Development and Qualification of Composite Landing Gears
  OCT 2010
AS39029/50A
Contacts, Electrical Connector, Pin, Crimp Removable, Shielded (For MIL-C-83733 Connector)
  SEP 2010 / A
AS39029/9B
Contacts, Electrical Connector, Pin, Crimp Removable, Thermocouple (For MIL-DTL-26482 Series 2, AS81703 Series 3, MIL-DTL-83723 Series I and III, and MIL-DTL-83733 Connectors)
  SEP 2010 / B
AS39029/51A
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded (For MIL-DTL-83733 Connector)
  SEP 2010 / A
AS81819A
Bearings, Plain Self-Aligning, Self- Lubricating, High Speed-Oscillation -65 to +160 °F, General Specification For
  SEP 2010 / A
AS81819/1A
Bearings, Plain, Self-Lubricating, Self- Aligning, High Speed Oscillation -65 to +160 °F
  SEP 2010 / A
AS85049/92B
Connector Accessories, Composite Electrical, Strain Relief, 90°, Self-Locking, Category 4C (For MIL-DTL-38999 Series III and IV Connectors)
  SEP 2010 / B
AS85049/91C
Connector Accessories, Composite, Electrical, Strain Relief, Straight, Self-Locking, Category 4C (for MIL-DTL-38999 Series III and IV Connectors)
  SEP 2010 / C
AS31551A
Connector, Electric, Rear Accessory Design Standard
  SEP 2010 / A
AS8049/1
Performance Standards for Single-Occupant, Side-Facing Seats in Civil Rotocraft, Transport Aircraft, and General Aviation Aircraft
  SEP 2010
AIR5742
Packaging and Transportation of Oxygen Equipment
  AUG 2010
AS1650B
Coupling Assembly, Threadless, Flexible, Fixed Cavity, Self-Bonding, Procurement Specification
  AUG 2010 / B
AS172236C
Nut, Spanner, Bearing Retaining, Aeronautical, UNS G41400
  AUG 2010 / C
AS6140
Nut, Spanner, Bearing Retaining, Phosphate Treated, Aeronautical, UNS G41400
  AUG 2010
AS21241
Bearing, Sleeve, Flanged, Self-Lubricating -65 to +250 °F
  AUG 2010
AS21240
Bearing, Sleeve, Plain, Self-Lubricating -65 to 250 °F
  AUG 2010
AS8943
Bearings, Sleeve, Plain and Flanged, Self-Lubricating -65 to +250 °F
  AUG 2010
AS7475D
Bolts, Cobalt-Chromium-Nickel Alloy, UNS R30159, Tensile Strength 260 ksi, Procurement Specification
  AUG 2010 / D
AIR825/3
Gaseous Oxygen And Oxygen Equipment, Introductory
  AUG 2010
ARP5369A
Guidelines for Wire Identification Marking Using the Hot Stamp Process
  AUG 2010 / A
AS7928/1C
Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, for Thin Wall Wire, Type II Class 1 for 105 °C Total Conductor Temperature
  AUG 2010 / C
MA3353B
Nut, Self Locking - Spline Drive, Extended Washer, UNS G87400, Cadmium Plate, MJ Thread, Metric
  AUG 2010 / B
ARP5812
Actuators, Mechanical, Linear Mechanical, General Specifications For
  AUG 2010
AS595D
Aerospace - Civil Type Variable Delivery, Pressure Compensate, Hydraulic Pump
  AUG 2010 / D
AS6141
FITTING, UNION AND REDUCER, FLARELESS, PRECISION TYPE
  AUG 2010
ARP4386C
Terminology and Definitions for Aerospace Fluid Power, Actuation and Control Technologies
  JUL 2010 / C
AS9902D
Plug, Machine Thread Drilled, Preformed Packing, AS8879 Thread (UNS S34700)
  JUL 2010 / D
AS3486D
Nut, Self-Locking, Extended Double Hexagon, Reduced Flange, Dry Film Lube, UNS S66286, Class: 160 KSI/800 °F
  JUL 2010 / D
AIR1594C
Plain Bearing Selection for Landing Gear Applications
  JUL 2010 / C
ARP5257B
Tire Overspeed Landing Test
  JUL 2010 / B
AS5551A
Fittling Assembly - 24° Cone Flarelss per AS5827, 5080 psi, Port Connection Port Preparation, Installation and Removal of AS5550 and AS5865
  JUL 2010 / A
AS1007H
Fitting, Union, Standard and Reducer, Bulkhead, Flareless
  JUL 2010 / H
AS39029/60A
Contacts, Electrical Connector, Pin, Crimp Removable, Shielded, Size 8 (For MIL-DTL-38999 Series I, III, and IV Connectors)
  JUL 2010 / A
AIR5919A
Alternatives to Cadmium Plating
  JUL 2010 / A
AS7456B
Studs, Steel, Low Alloy, Heat Treated, Roll Threaded
  JUN 2010 / B
AIR5567A
Test Method for Catalytic Carbon Brake Disk Oxidation
  JUN 2010 / A
AS7472A
Bolts and Screws, Steel, Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded
  JUN 2010 / A
AIR744C
Aerospace Auxiliary Power Sources
  JUN 2010 / C
AS1895/13D
Flange End, Female, Type I Standard Profile, Design Standard
  JUN 2010 / D
AS1895/15E
Flange End, Female, Type II, Low Profile, Design Standard
  JUN 2010 / E
AS1895/12D
Flange End, Male, Type I Standard Profile, Design Standard
  JUN 2010 / D
AS1895/14D
Flange End, Male, Type II Low Profile, Design Standard
  JUN 2010 / D
AS14104D
Bearing, Plain, Self-Lubricating, Self-Aligning, Low Speed, Narrow, Chamfered Race, -65°F to 325°F
  JUN 2010 / D
AS14101D
Bearing, Plain, Self-Lubricating, Self-Aligning, Low Speed, Narrow, Grooved Outer Ring, -65° to 325°F
  JUN 2010 / D
AS14102D
Bearing, Plain, Self-Lubricating, Self-Aligning, Low Speed, Wide, Chamfered Race, -65°F to 325°F
  JUN 2010 / D
AS14103E
Bearing, Plain, Self-Lubricating, Self-Aligning, Low Speed, Wide, Grooved Race, -65°F to 325°F
  JUN 2010 / E
AIR825/14
Basic Aircraft Oxygen Systems Design
  JUN 2010
ARP6137
Tire Pressure Monitoring Systems (TPMS) for Aircraft
  JUN 2010
AS5756/7
CABLE, LOW INDUCTANCE, 270 VOLT DC
  JUN 2010
AS33700A
Insert Arrangements, Electric Connector, Shell Size 12
  JUN 2010 / A
AS33703A
Insert Arrangements, Electric Connector, Shell Size 37
  JUN 2010 / A
AS39029/59A
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, Size 8 (For MIL-DTL-38999 Series I, III, and IV Connectors)
  JUN 2010 / A
MA5405A
Splices, Fiber Optics, for Aerospace Inter-Connection Systems
  JUN 2010 / A
ARP743C
Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces By the Particle Count Method
  MAY 2010 / C
ARP5481A
Recommended Wheel Tie Bolt Preload Procedure
  MAY 2010 / A
AIR5005A
Aerospace - Commercial Aircraft Hydraulic Systems
  MAY 2010 / A
AS1032F
Fitting, Tee, Standard and Reducer, Bulkhead on Run, Internal Port on Run, Flared
  MAY 2010 / F
AS3650A
Bolt, Machine - Double Hex Head, Reduced Shank, UNS N07718 - 185 Ksi
  MAY 2010 / A
AS5234
Nut, Coupling, Flareless
  MAY 2010
AS33401A
Bulkhead Bracket for Use With MS3367 Plastic Tiedown Straps
  MAY 2010 / A
AS33391A
Plate, Mounting, Plastic for Use With MS3367 Plastic Tiedown Straps
  MAY 2010 / A
AIR4566A
Crashworthy Landing Gear Design
  MAY 2010 / A
ARP5777
Maintenance and Inspection Procedures for Acme Screw Assemblies
  MAY 2010
AS85049/81A
Connector Accessories, Electrical, Seal Plug, Size 10, Category 7 (MIL-C-38999 Connectors)
  MAY 2010 / A
AS35769A
Gasket, Metallic, Encased, Annular, Copper
  APR 2010 / A
AIR38B
Guide for the Design of Threaded Screw Or Stud Type Electrical Equipment Terminations
  APR 2010 / B
AS33701A
Insert Arrangements, Electric Connector, Shell Size 19
  APR 2010 / A
AS33702A
Insert Arrangements, Electric Connector, Shell Size 27
  APR 2010 / A
AS33699A
Insert Arrangements, Electric Connector, Shell Size 7
  APR 2010 / A
ARP5879
Aerospace - Test Methodology for Electrohydrostatic Actuators
  APR 2010
AS85049/143
Connector Accessories, Backshell, Strain Relief, Category 4C, For AS81714, Size 22, 20 and 16 Terminal Junction Blocks
  APR 2010
AS1006F
Fitting, Cross, Standard and Reducer, Flareless
  APR 2010 / F
AS1004F
Fitting, Elbow, 90°, Standard and Reducer, Flareless
  APR 2010 / F
AS1005G
Fitting, Tee, Standard and Reducer, Flareless
  APR 2010 / G
AS5162B
Fitting, Connector, Multiple Fluid Pressure Line, 90°
  APR 2010 / B
AS1034F
Fitting, Elbow, 90°, Standard and Reducer, Flared
  APR 2010 / F
AS35411C
Fittings, Lubrication
  APR 2010 / C
AS611E
Hose Assembly and Tubing, Polytetrafluoroethylene, Cleaning Methods For
  APR 2010 / E
AIR1494B
Verification of Landing Gear Design Strength
  APR 2010 / B
AS1039F
Fitting, Tee, Standard and Reducer, Bulkhead on Side, Flared
  MAR 2010 / F
AS1036H
Fitting, Cross, Standard and Reducer, Flared
  MAR 2010 / H
AS15720C
Fitting, Lubrication, Hydraulic, Throat or Surface Check, .250-28 Taper Threads, Corrosion Resistant Steel, Type VII
  MAR 2010 / C
AS15721C
Fitting, Lubrication, Hydraulic, Throat or Surface Check, 1/8 Pipe Threads, Corrosion Resistant Steel, Type VIII
  MAR 2010 / C
AS1033F
Fitting, Tee, Standard and Reducer, Bulkhead on Run, Flared
  MAR 2010 / F
AS1035F
Fitting, Tee, Standard and Reducer, Flared
  MAR 2010 / F
AS3589B
Pin and Plug, Expansion Set of Parts, Al Alloy 2024-T4 and 2024-T351, Long; Std and .010 Oversize Diameters (UNS A92024)
  MAR 2010 / B
AS7225A
Rivets, Carbon Steel, Procurement Specification For
  MAR 2010 / A
AS15004C
Fitting, Lubrication, Hydraulic, Surface Check, .250-28 Taper Threads, Nickel-Copper Alloy, Type IV
  MAR 2010 / C
AS15001C
Fitting, Lubrication, Hydraulic, Surface Check, .250-28 Taper Threads, Steel, Type I
  MAR 2010 / C
AS15005C
Fitting, Lubrication, Hydraulic, Throat or Surface Check, 1/8 Pipe Threads, Nickel-Copper Alloy, Type V
  MAR 2010 / C
ARP5376B
Methods, Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids
  MAR 2010 / B
AS1038F
Fitting, Elbow, 90°, Standard and Reducer, Bulkhead, Flared
  MAR 2010 / F
AS1037G
Fitting, Union, Standard and Reducer, Bulkhead, Flared
  MAR 2010 / G
AS22759/182
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, NICKEL-COATED HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 ºC, 600 VOLTS
  FEB 2010
AS22759/191
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, SILVER-COATED COPPER CONDUCTOR, 200 ºC, 600 VOLTS
  FEB 2010
AS22759/181
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, SILVER-COATED HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 ºC, 600 VOLTS
  FEB 2010
AS22759/184
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 260 ºC, 600 VOLTS
  FEB 2010
AS22759/190
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKEL-COATED HIGH STRENGTH AND ULTRA HIGH STRENGTH COPPER ALLOY, 260 ºC, 600 VOLTS
  FEB 2010
AS22759/186
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER-COATED COPPER CONDUCTOR, 200 ºC, 600 VOLTS
  FEB 2010
AS22759/183
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER-COATED COPPER CONDUCTOR, 200 ºC, 600 VOLTS
  FEB 2010
AS22759/189
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER-COATED HIGH STRENGTH AND ULTRA HIGH STRENGTH COPPER ALLOY, 200 ºC, 600 VOLTS
  FEB 2010
AS22759/188
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, TIN-COATED COPPER CONDUCTOR, 150 ºC, 600 VOLTS
  FEB 2010
AS22759/185
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, TIN-COATED COPPER CONDUCTOR, 150 ºC, 600 VOLTS
  FEB 2010
AS22759/192
Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Smooth Surface, Light Weight, Nickel-Coated Copper Conductor, 260 °C, 600 Volts
  FEB 2010
AS22759/187
Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Smooth Surface, Normal Weight, Nickel-Coated Copper Conductor, 260 °C, 600 Volts
  FEB 2010
AIR5303
Infrasound Phenomenon in Engine Test Cells
  FEB 2010
AIR6553
Measurement Uncertainty and Consumer Risk
  JAN 2010
AS5870
Thread Inspection Practices
  JAN 2010
AS7974/5
CABLE ASSEMBLY, EXTERNAL ELECTRIC POWER, AIRCRAFT, SINGLE-JACKETED 270 VDC, 90 KW
  JAN 2010
AS1040F
Fitting, Elbow, 45°, Standard and Reducer, Bulkhead, Flared
  JAN 2010 / F
AS50571A
Lights, Instrument, Individual, General Specification For
  JAN 2010 / A
AS21938B
Bolt, Cluster Fitting, Single Port, Flareless
  JAN 2010 / B
AS33931B
Packing, Preformed, Straight Thread Tube Fitting Boss, Hydraulic, -65 °F to +275 °F
  JAN 2010 / B
AS25050A
Colors, Aeronautical Lights and Lighting Equipment, General Requirements For
  JAN 2010 / A
AS15002C
Fitting, Lubrication, Hydraulic, Surface Check, Straight Threads, Steel, Type II
  JAN 2010 / C
AS18280E
Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi
  JAN 2010 / E
ARP5632
Rotorcraft: Application of Existing Aircraft Designed Tires, Wheels and Brakes
  JAN 2010
ARP1280B
Aerospace - Application Guide for Hydraulic Power Transfer Units
  DEC 2009 / B
AS6050
Fitting, Elbow, 45°, Standard and Reducer, Bulkhead, Flareless, Precision Type
  DEC 2009
AS6042
Fitting, Tee, Standard and Reducer, Bulkhead and Internal Port on Run, Flareless, Precision Type
  DEC 2009
AIR5717
Mitigating Wire Insulation Damage During Processing and Handling
  DEC 2009
AS29561A
Packing, Preformed, "O" Ring, Synthetic Lubricant Resistant
  DEC 2009 / A
AS29512A
Packing, Preformed, Hydrocarbon Fuel-Resistant, Tube Fitting, "O" Ring
  DEC 2009 / A
AS28778A
Packing, Preformed, Straight Thread Tube Fitting Boss
  DEC 2009 / A
AS5692A
ARC Fault Circuit Breaker (AFCB), Aircraft, Trip-Free Single Phase and Three Phase 115 VAC, 400 Hz - Constant Frequency
  DEC 2009 / A
AS21936
Contour and Mounting End, Cluster Fitting Body, Semifinished, Design Standard
  DEC 2009
AS4309C
Fitting, Nipple, Flared Tube to Pipe Thread, For Seal Ring
  DEC 2009 / C
AS6041
Fitting, Tee, Standard and Reducer, Bulkhead on Run, Internal Port on Side, Flareless, Precision Type
  DEC 2009
AS6049
Fitting, Tee, Standard and Reducer, Bulkhead on Side, Flareless, Precision Type
  DEC 2009
AS85049/4B
Connector Accessories, Electrical, Backshell, Cable Sealing, Straight, Step-Up, Category 1A (For MIL-DTL-22992 Connectors, Classes C, J, and R)
  NOV 2009 / B
AS18280/1B
Sleeve, Bite Type, 24° Cone Flareless Fitting, 3000 psi
  OCT 2009 / B
AIR5800
Tire Prerotation at Landing
  OCT 2009
AS5961A
Hose Assembly, Polytetrafluoroethylene CRES Braid Reinforced, 400°F, 5080 psi Flareless, Straight to Straight
  OCT 2009 / A
MA5405/1A
Splice, Fiber Optic, Aerospace Inter-Connect, Grade Index 100/140/172 Cable Size
  OCT 2009 / A
AS7928/13
Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Tin Whisker Resistant, Ring Tongue, Bell-Mouthed, Type II, Class 1 (For 150°C Total Conductor Temperature)
  OCT 2009
AS85049/93B
CONNECTOR ACCESSORIES, ELECTRICAL, TERMINATION, SHIELD SPLIT SUPPORT RING, COMPOSITE, NONENVIRONMENTAL, STRAIGHT, CATEGORY 7
  OCT 2009 / B
AS39029/88A
Contacts, Electrical Connector, Socket, Crimp Removable, Thermocouple (For MIL-DTL-38999 Series I, II, III, IV Connectors)
  SEP 2009 / A
AS21913D
Plug, Flareless Tube
  SEP 2009 / D
AS83461/1
PACKING, PREFORMED – M83461 O-RING
  SEP 2009
AS39029/80A
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded (For MIL-DTL-28748/10 Connectors)
  SEP 2009 / A
AS39029/87A
Contacts, Electrical Connector, Pin, Crimp Removable, Thermocouple (For MIL-DTL-38999 Series I, II, III, and IV, MIL-DTL- 24308, and MIL-DTL-83733)
  SEP 2009 / A
AS39029/79A
Contacts, Electrical Connector, Pin, Crimp Removable, Shielded (For MIL-DTL-28748/9 Connectors)
  SEP 2009 / A
AS39029/89A
Contacts, Electrical Connector, Socket, Crimp Removable (Thermocouple for MIL-DTL-38999 Series II, MIL-DTL-83733, and MIL-DTL-24308 Connectors)
  SEP 2009 / A
AS31421
CONNECTORS, RECEPTACLE, ELECTRICAL, BOX MOUNTING, SOLDER CONTACT, HERMETIC, AN TYPE
  SEP 2009
AS15003C
Fitting, Lubrication, Hydraulic, Surface Check, 1/8 Pipe Threads, Steel, Type III
  SEP 2009 / C
ARP4378B
Aerospace - Accumulator, Hydraulic, Welded Bellows, Factory Precharged
  AUG 2009 / B
AS85049/31B
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, NON-SELF-LOCKING AND SELF-LOCKING, CATEGORY 3B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
  JUL 2009 / B
AS85049/27B
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
  JUL 2009 / B
AS85049/43B
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NON-ENVIRONMENTAL, SELF-LOCKING AND NON-SELF-LOCKING, 45°, CATEGORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
  JUL 2009 / B
AS4627D
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275°F, 3000 Psi, Flareless, Titanium Fittings, Including Jump Size, 45° to 45°
  JUL 2009 / D
AS4628D
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275°F, 3000 Psi, Flareless, Titanium Fittings, Including Jump Size, 45° to 90°
  JUL 2009 / D
AS4629D
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275°F, 3000 Psi, Flareless, Titanium Fittings, Including Jump Size, 90° to 90°
  JUL 2009 / D
AS4625D
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275°F, 3000 Psi, Flareless, Titanium Fittings, Including Jump Size, Straight to 45°
  JUL 2009 / D
AS4626D
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275°F, 3000 Psi, Flareless, Titanium Fittings, Including Jump Size, Straight to 90°
  JUL 2009 / D
AS4624D
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275°F, 3000 Psi, Flareless, Titanium Fittings, Including Jump Size, Straight to Straight
  JUL 2009 / D
AIR5478A
U.S. Government Document Retention Status and Non-Government Document Replacement - Aerospace Couplings, Fittings, Hoses, and Tube Supports
  JUL 2009 / A
AS39029/74A
CONTACTS, ELECTRICAL CONNECTORS, PIN, SOLDER, REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-DTL-83723 SERIES III, MIL-DTL-26482 SERIES 2, MIL-DTL-83733 AND MIL-DTL-83527 CONNECTORS)
  JUN 2009 / A
AS39029/73A
CONTACTS, ELECTRICAL CONNECTORS, SOCKET, SOLDER, REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-DTL-83723 SERIES III, MIL-DTL-26482 SERIES 2, MIL-DTL-83733, AND MIL-DTL-83527 CONNECTORS)
  JUN 2009 / A
AS3658A
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN
  JUN 2009 / A
AS5587B
Clamp, Loop, Plain, Support, Aircraft
  JUN 2009 / B
AS39029/109A
Contacts, Electrical Connector, Pin, Crimp Removable, Socket, Multiple Wires
  JUN 2009 / A
AS39029/108A
Contacts, Electrical Connector, Pin, Crimp Removable, Socket, Single Wire
  JUN 2009 / A
AS9449B
Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head UNS K14675, 195 ksi Min, .1380-40 UNJF-3A
  JUN 2009 / B
ARP1590A
Recommended Part Numbering Guidelines for Fluid System Components Inch System of Measurement
  JUN 2009 / A
AIR5558
Ultraviolet (UV) Laser Marking Performance of Aerospace Wire Constructions
  MAY 2009
AS5752
Aerospace - Visual Inspection Standard for Elastomeric Sealing Elements Other than O-Rings
  MAY 2009
AS4300B
Fitting Assembly, Cap, Flareless, Protective Closure, Low Pressure
  MAY 2009 / B
AS5808B
Fitting Assembly, Tee, Female Flareless and Axially Swage on Run, Female Flareless on the Branch, Hydraulic, 3000 psi
  MAY 2009 / B
AS1732E
Body, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type I
  MAY 2009 / E
AS1733E
Body, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type II
  MAY 2009 / E
AS1731C
Coupling, Rigid, Fixed Cavity, Threaded Ferrule Type Tube Ends, Envelope Dimensions Design Standard
  MAY 2009 / C
AS1737C
Ferrule, Coupling, Rigid, Fixed Cavity Threaded, Ferrule Type Tube Ends
  MAY 2009 / C
AS1738C
Nut Assembly Coupling, Rigid, Fixed Cavity, Threaded Ferrule Type Tube Ends
  MAY 2009 / C
AS1734D
Nut, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type I
  MAY 2009 / D
AS1735D
Nut, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type II
  MAY 2009 / D
AIR5556
Landing Gear Alignment
  MAY 2009
AS3655
CABLE, SAFETY, NICKEL ALLOY, CORROSION RESISTANT (UNS N06625)
  MAY 2009
AS5233A
Fitting Assembly, Cap, Flareless
  APR 2009 / A
MA2078B
Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE), Metric
  APR 2009 / B
AS5974C
Fitting Assembly, Straight, Female Flareless, Axially Swaged, Hydraulic, 5080 psi
  APR 2009 / C
AS4623D
Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000 psi, 275 °F, Heavy Duty, Aircraft Hydraulic Systems
  APR 2009 / D
AS5193A
Fitting, Cross, Internal Straight Thread Port
  MAR 2009 / A
AS5728
PACKING, PREFORMED, O-RING MOLDED FROM AMS7268 MATERIAL
  MAR 2009
AS5172B
Fitting, Adapter, Port, Reducer
  MAR 2009 / B
AS5174E
Fitting, Union and Reducer, Flared
  MAR 2009 / E
AS27488A
Plug, End Seal, Electrical Connector
  MAR 2009 / A
AS4370D
Nut, Fitting, Retained
  MAR 2009 / D
MA1565B
Inserts, Screw Thread, Helical Coil Metric Series, Procurement Specification for
  MAR 2009 / B
AS138G
Hose Assembly, Metal - Medium Pressure, Flareless, Welded, Straight to 90°
  MAR 2009 / G
ARP1907B
Automatic Braking Systems
  MAR 2009 / B
AS81790/1
CONNECTOR, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, 270 VDC, 90 KW
  FEB 2009
AIR5631
Catalog of Landing Gear Systems and Suppliers
  FEB 2009
AS1710D
Coupling, Fuel, Flexible, Variable Cavity, Threaded Type With Ferrules
  FEB 2009 / D
AS4862A
Fitting, Plug, Pipe, External Thread, Hex Head
  FEB 2009 / A
AS4684C
Fitting Assembly, Elbow, 45°, Flareless and Short Flareless, Reducer, Retained Nut
  FEB 2009 / C
AS4687D
Fitting Assembly, Elbow, 90°, Flareless and Short Flareless, Reducer, Retained Nut
  FEB 2009 / D
AS5807A
Fitting Assembly, Tee, Axially Swaged on the Run, Male Flareless on the Branch, Hydraulic, 3000 psi
  FEB 2009 / A
AS5804A
Fitting Assembly, Tee, Female Flareless and Axially Swaged on the Run, Axially Swaged on the Branch, Hydraulic, 3000 psi
  FEB 2009 / A
AS4692E
Fitting Assembly, Tee, Flareless and Short Flareless, Reducer, Retained Nut on Side
  FEB 2009 / E
AS603B
Impulse Testing of Hydraulic Hose, Tubing, and Fitting Assemblies
  FEB 2009 / B
AS4678C
Nut, Bulkhead, Short Flareless
  FEB 2009 / C
AS3124A
PIN, EXPANSION - ALUMINUM, 2024-T4 AND 2024-T351, SHORT, UNS A92024
  FEB 2009 / A
AS3123A
PLUG, EXPANSION - ALUMINUM, 2024-T4 AND 2024-T351, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS A92024
  FEB 2009 / A
AS3588A
PIN AND PLUG, EXPANSION, SET OF PARTS AL ALLOY 2024-T4 AND 2024-T351, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS A92024
  FEB 2009 / A
AS3584A
PIN AND PLUG, EXPANSION, SET OF PARTS CRES, 416 OR 416SE, LONG; STD AND .010 OVERSIZE DIAMETERS, UNS S41600/UNS S41623
  FEB 2009 / A
AS3585A
PIN AND PLUG, EXPANSION, SET OF PARTS CRES, 416 OR 416SE, STD AND .010 OVERSIZE DAIMETERS, SHORT, UNS S41600/UNS S41623
  FEB 2009 / A
ARP1311C
Landing Gear Structures and Mechanisms
  FEB 2009 / C
AS3586A
PIN AND PLUG, EXPANSION, SET OF PARTS CRES, 303, LONG, UNS S30300
  FEB 2009 / A
AS3587A
PIN AND PLUG, EXPANSION, SET OF PARTS, STD AND .010 OVERSIZE DIAMETERS, CRES 303, SHORT, UNS S30300
  FEB 2009 / A
AS9100C
Quality Management Systems - Requirements for Aviation, Space and Defense Organizations
  JAN 2009 / C
AIR4150A
Inspection of Inservice Airborne Accumulators for Corrosion and Damage
  JAN 2009 / A
AS39029/6A
Contacts, Electrical Connector, Pin, Crimp Removable, Shielded, (For Mil-C-81511 Series 1 and 2 Connectors)
  DEC 2008 / A
AS23190/4
Mounting Hardware, Cushion Clamp, Metal for Cable Harness Tying and Support, Type V, Class 1
  DEC 2008
AS28775A
PACKING, PREFORMED - MS28775 O-RING
  DEC 2008 / A
ARP1974A
Clamps, Support, Comparative Fatigue Strengths, Test Method
  DEC 2008 / A
AIR1590A
Recommended Part Numbering Guidelines for Fluid System Components Inch System of Measurements
  DEC 2008 / A
AS39029/113A
Contact, Electrical Connector, Concentric Twinax, Pin, Size 8, MIL-DTL-38999 Series I, III, and IV
  OCT 2008 / A
AS39029/114A
Contact, Electrical Connector, Concentric Twinax, Socket, Size 8, MIL-DTL-38999 Series I, III, and IV
  OCT 2008 / A
AS5259
Crimping Tool and Accessories, Electrical, Size 8 to 700 KCMIL, General Purpose Use, Die and Dieless
  SEP 2008
AS39029/13A
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded (For MIL-C-81511 Series 1 Connectors)
  SEP 2008 / A
AS39029/14A
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded (For MIL-C-81511 Series 2 Connectors)
  SEP 2008 / A
AS8043B
Restraint Systems for Civil Aircraft
  SEP 2008 / B
AIR5797
Aircraft Tire Wear Profile Development and Execution for Laboratory Testing
  AUG 2008
AS9956A
Packing, Preformed (PTFE) - AMS3668, Seal
  AUG 2008 / A
AS51007A
Gasket, Rubber, Synthetic
  AUG 2008 / A
AS25189
Terminal, Lug, Flag Type, Crimp Style, Copper, Class I
  JUL 2008
AIR5713
In-Service Reliability Data of Continuously Active Ballscrew and Geared Flight Control Actuation Systems
  JUL 2008
AS5810
Fitting Assembly, Tee, Male Flareless on the Run, Axially Swaged on the Run and the Branch, Hydraulic, 300 psi
  JUL 2008
AS5803
Fitting Assembly, 45° Elbow, Female, Flareless, Axially Swaged, Hydraulic, 3000 psi
  JUN 2008
AS5801
Fitting Assembly, 90°, Female, Flareless, Axially Swaged, Hydraulic, 3000 psi
  JUN 2008
AS5802
Fitting Assembly, 90°, Male, Flareless, Axially Swaged, Hydraulic, 3000 psi
  JUN 2008
AS5806
Fitting Assembly, Tee, Axially Swaged on the Run, Female Flareless on the Branch, Hydraulic, 3000 psi
  JUN 2008
AS21944B
Bolt, Cluster Fitting, Two Way, 180°, Flareless
  JUN 2008 / B
AS21926B
Elbow, 90° Universal, Flareless Tube, Low Profile
  JUN 2008 / B
AS5809
Fitting Assembly, Tee, Female, Flareless and Axially Swaged on the Run, Male Flareless on Branch, Hydraulic, 3000 psi
  JUN 2008
AS5805
Fitting Asssembly, 90°, Flareless Bulkhead, Axially Swaged, Hydraulic, 5000 psi
  JUN 2008
AIR5871
Prognostics for Gas Turbine Engines
  JUN 2008
AS21916D
Reducer, External Thread, Flareless Tube
  JUN 2008 / D
AS21924C
Union, Flareless Tube, Bulkhead and Universal
  JUN 2008 / C
AS4223A
Fitting, Union, Bulkhead, Beam Seal
  JUN 2008 / A
AS21902C
Union, Flareless Tube
  JUN 2008 / C
AS85449A
Clamp Assembly, Saddle Type, Cushioned, General Specification For
  MAR 2008 / A
ARP5908
Landing Gear Servicing
  MAR 2008
ARP5941
Aerospace Fluid Power - Contamination Sensitivity - Considerations for Establishing Test Procedures for Flight Control Actuators
  MAR 2008
AS136G
Hose Assembly, Metal - Medium Pressure, Flareless, Welded, Straight to Straight
  MAR 2008 / G
AS71051B
Pipe Threads, Taper, Aeronautical National Form, Symbol ANPT - Design and Inspection Standard
  MAR 2008 / B
AS28889A
Valve, Air, High Pressure Charging, 5000 psi
  FEB 2008 / A
AIR5829
Air in Aircraft Hydraulic Systems
  FEB 2008
AS5763
Clamp Assembly, Saddle Type, Cushioned, Fuel and Petroleum Based Hydraulic Fluid
  FEB 2008
AS5874
Clamp, Loop Type, Cushioned Support
  FEB 2008
ARP4741
Aerospace-Hydraulic Switching Valve, Pressure or Pilot Operated
  FEB 2008
AS85421/7A
Fitting Assembly, Cross, Beam Seal, 3000/4000 psi, 4 Female Ends
  JAN 2008 / A
AS85421/9A
Fitting Assembly, Cross, Reducer Beam Seal, 3000/4000 psi, 4 Female Ends
  JAN 2008 / A
AS85421/10C
Fitting, Adapter, Beam Seal, 3000/4000 psi, Male to Flareless
  JAN 2008 / C
AS85421/6A
Fitting, Cross, Beam Seal, 3000/4000 psi, Male Ends
  JAN 2008 / A
AS85421/8A
Fitting, Cross, Reducer, Beam Seal 3000/4000 psi, 4 Male Ends
  JAN 2008 / A
AS85421/15C
Fitting, Elbow, 45°, Beam Seal, 3000/4000 psi, Bulkhead, Male Ends
  JAN 2008 / C
AS85421/13C
Fitting, Elbow, 90°, Beam Seal, 3000/4000 psi, Bulkhead, Male Ends
  JAN 2008 / C
AS85421/14C
Fitting, Elbow, 90°, Beam Seal, 3000/4000 psi, Male to Female
  JAN 2008 / C
AS85421/12C
Fitting, Elbow, 90°, Beam Seal, 3000/4000 psi, Male to Male
  JAN 2008 / C
AS85421/17C
Fitting, Tee, Beam Seal, 3000/4000 psi, Bulkhead on Branch, Male Ends
  JAN 2008 / C
AS85421/16C
Fitting, Tee, Beam Seal, 3000/4000 psi, Bulkhead on Run, Male Ends
  JAN 2008 / C
AS85421/5C
Fitting, Tee, Reducer and Non-Reducer, Beam Seal, 3000/4000 psi, Male on Run and Branch, Swivel Nut on Run
  JAN 2008 / C
AS85421/4C
Fitting, Tee, Reducer and Non-Reducer, Beam Seal, 3000/4000 psi, Male on Run, Swivel Nut on Branch
  JAN 2008 / C
AS85421/3C
Fitting, Tee, Reducer, Beam Seal, 3000/4000 psi, 3 Male Ends
  JAN 2008 / C
AS85421/11C
Fitting, Union, Beam Seal, 3000/4000 psi, Male Ends
  JAN 2008 / C
AS5951C
Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 5080 psi (35,000 kPa), 275 °F (135 °C), Aircraft Hydraulic Systems
  JAN 2008 / C
AS7205
Spring Pins, Tubular, Carbon Steel, Procurement Specification for
  DEC 2007
AS5767
Fitting Assembly, Tee, Female Flareless, Axially Swaged, Hydraulic, 5080 psi
  DEC 2007
AIR5699
A Guide for the Damaging Effects of Tire and Wheel Failures
  NOV 2007
AS81021A
Copper-Beryllium Alloy (Copper Alloy Numbers C17500 and C17510), Strip
  NOV 2007 / A
AMSW6858B
Welding, Resistance: Spot and Seam
  NOV 2007 / B
AS4941A
Aerospace - General Requirements for Commercial Aircraft Hydraulic Components
  NOV 2007 / A
AS7928/9
Terminals, Lug and Splices, Conductor, Crimp Style, Copper, Insulated, Rectangular Tongue, Tin Whisker Resistant for Thin Wall Wire, Type II, Class 1 for 105 °C Total Conductor Temperature
  NOV 2007
AS21942A
Body, Cluster Fitting, One Way, Flareless
  NOV 2007 / A
AS21945A
Body, Cluster Fitting, Three-Way, Flareless
  NOV 2007 / A
AS21943A
Body, Cluster Fitting, Two Way, 90°, Flareless
  NOV 2007 / A
AS21940A
Bolt, Cluster Fitting, Double Port, Flareless
  NOV 2007 / A
AS21941A
Bolt, Cluster Fitting, Double Port, Through, Flareless
  NOV 2007 / A
AS21939A
Bolt, Cluster Fitting, Single Port, Through, Flareless
  NOV 2007 / A
AS5827A
Fitting End, Flareless, Extra Fine Thread, Design Standard
  NOV 2007 / A
AS21937A
Nut, Cluster Fitting, Retainer
  NOV 2007 / A
AS90376A
Cap, Dust, Plastic, Electric Connector
  OCT 2007 / A
AS18280SUP1A
Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi (Supplement 1)
  OCT 2007 / A
AS3659
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN
  OCT 2007
AS21432A
Bearing, Roller, Needle, Track Roller, Integral Stud, Type VII, Antifriction, Inch
  OCT 2007 / A
MA5405/2
Splice, Fiber Optic, Aerospace Inter-Connect (MIL-PRF-29504 Termini)
  OCT 2007
AS5227A
Flange, Straight Thread Port, Weld
  SEP 2007 / A
AS9529A
Bolt, Machine - Steel UNS G87400, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .1900-32 UNJF-3A
  SEP 2007 / A
AS7928/10
Terminals, Lug and Splices, Conductor, Crimp Style, Splice, Electric, Tin Whisker (Permanent, Type II, Class 1) for 105 °C Total Conductor Temperature
  SEP 2007
AMSL18331A
Lead Alloy Pig
  SEP 2007 / A
AS22759/92B
Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Light Weight, Nickel Coated, Copper Conductor, 260°C, 600 Volts
  AUG 2007 / B
AS22759/82B
Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Light Weight, Nickel Coated, High Strength or Ultra High Strength Copper Alloy, 260°C, 600 Volts
  AUG 2007 / B
AS22759/91B
Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Light Weight, Silver Coated, Copper Conductor, 200 °C, 600 Volts
  AUG 2007 / B
AS22759/81B
Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Light Weight, Silver Coated, High Strength or Ultra High Strength Copper Alloy, 200 °C, 600 Volts
  AUG 2007 / B
AS22759/87B
Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Nickel Coated, Copper Conductor, 260 °C, 600 Volts
  AUG 2007 / B
AS22759/86B
Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Silver Coated, Copper Conductor, 200 °C, 600 Volts
  AUG 2007 / B
AS22759/88B
Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Tin Coated, Copper Conductor, 150 °C, 600 Volts
  AUG 2007 / B
AS5503A
Hose Assembly, Lined Silicone, 125 psi, Flareless to Fixed Cavity, Potable Water
  AUG 2007 / A
AS5116C
Minimum Operational Performance Specification for Ground Ice Detection Systems
  AUG 2007 / C
AIR825/2
Effects of Acute Altitude Exposure in Humans: Requirements for Physiological Protection
  JUL 2007
AS7928/8
TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TIN WHISKER RESISTANT, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
  JUL 2007
AS4805
Solid State Power Controller, General Standard For
  JUL 2007
AS15006B
Fitting, Lubrication, Hydraulic, Leakproof, 1/8 Pipe Threads, Steel, Type VI
  JUL 2007 / B
ARP5448/2
Plain Bearing High Speed Oscillation Test
  JUL 2007
AS94900
Aerospace - Flight Control Systems - Design, Installation and Test of Piloted Military Aircraft, General Specification For
  JUL 2007
AS5798
Aerospace Size Standard for Oversize O-rings
  JUL 2007
AS5781
Retainers (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Single Turn, Scarf-Cut, For Use in AS4716 Glands
  JUL 2007
AS9575B
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .2500-28 UNJF-3A
  JUL 2007 / B
AS5039
Fitting, Body End - Threaded Coupling, Rigid, Self-Bonding, Design Standard
  JUL 2007
AS5948
Fitting, Bulkhead End - Threaded Coupling, Rigid, Self-Bonding, Design Standard
  JUL 2007
AS5947
Fitting, Ferrule End - Threaded Coupling, Rigid, Self-Bonding, Design Standard
  JUL 2007
AS3503
INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED, SELF-BROACHING KEYS, OVERSIZE UNS S66286
  JUL 2007
AS45909
Stud, Locked In, Ring Locked, Serrated, General Specification For
  JUL 2007
AS4724
Studs and Inserts, Locked In, Self-Broaching Keys - Hole Dimensions and Installation Requirements
  JUL 2007
AS123601B
Rivet, Solid, 100° Flush Head, AMS 7232
  JUL 2007 / B
AS4847A
Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For
  JUL 2007 / A
AS85049/136
Connector Accessories, Fiber Optic Backshell, Split, 45°, Self-Locking Category 3B for MIL-DTL-38999 Series III and AS5590/1 Connectors
  JUN 2007
AS85049/137
Connector Accessories, Fiber Optic Backshell, Split, 90°, Self-Locking Category 3B for MIL-DTL-38999 Series III and AS5590/1 Connectors
  JUN 2007
AS85049/135
Connector Accessories, Fiber Optic Backshell, Split, Straight, Self-Locking Category 3B for MIL-DTL-38999 Series III and AS5590/1 Connectors
  JUN 2007
AIR5615
Procedure for Determining the Dimensional Relationship of Rotating Components Coupled with Thrust Wires
  MAY 2007
AMS5561G
Steel, Corrosion and Heat-Resistant, Welded and Drawn or Seamless and Drawn Tubing, 9.0Mn - 20Cr - 6.5Ni - 0.28N, High-Pressure Hydraulic
  APR 2007 / G
ARP5873
LED Passenger Reading Light Assembly
  MAR 2007
AIR5937
Information on Electric Brakes
  MAR 2007
ARP5448/8A
Plain Spherical Bearing Radial and Axial Clearance Measurement
  FEB 2007 / A
ARP5935
Use of HVOF Thermal Spray Coatings for Hard Chrome Replacement in Landing Gear Applications
  FEB 2007
AS14153B
Circuit Breaker - Aircraft, Trip-Free, Push-Pull 3 Phase, 1 Thru 35 Amp, Type 1
  FEB 2007 / B
AS3075D
Gasket - 37° Flared Tube Fitting, Nickel, AMS 5553
  FEB 2007 / D
AS155001A
Stud, Stepped, 2 Dia Engagement, Cadmium Plated, Steel UNS G87400, .3125-18 UNS X .2500-28 UNF-3A
  FEB 2007 / A
AS155301A
Stud, Stepped, 2 Dia Engagement, Cadmium Plated, Steel UNS G87400, .3750-16 UNS X .3125-24 UNF-3A
  FEB 2007 / A
AS155901A
Stud, Stepped, 2 Dia Engagement, Cadmium Plated, Steel UNS G87400, .5000-13 UNS X .4375-20 UNF-3A
  FEB 2007 / A
AS162501A
Stud, Stepped, Drilled, Necked, 2 Dia Engagement, Cadmium Plated, Steel UNS G87400, .4375-14 UNS X .3750-24 UNF-3A
  FEB 2007 / A
AS158901A
Stud, Stepped, Necked, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .4375-14 UNS X .3750-24 UNF-3A
  FEB 2007 / A
AS85421SUP1
Fittings, Tube, Fluid Systems, Separable, Beam Seal, 3000/4000 psi, General Specification For (Supplement 1)
  JAN 2007
AS5692/2
ARC FAULT CIRCUIT BREAKER - AIRCRAFT, TRIP FREE, 1-20 AMP, TYPE I
  JAN 2007
AS5692/1
ARC FAULT CIRCUIT BREAKER, TRIP FREE, PUSH-PULL, FUSIBLE LINK DESIGN, 2 ½ -15 AMPS, TYPE I
  JAN 2007
AS5382/1A
Cable, Fiber Optic, Multimode, 100/140/172 μm Graded Index, Hermetic Coated, Tight Buffer
  JAN 2007 / A
AS22759/83B
Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Silver Coated, Copper Conductor, 200°C, 600 Volts
  DEC 2006 / B
AS22759/84B
Wire, Eelectrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Nickel Coated, Copper Conductor, 260°C, 600 Volts
  DEC 2006 / B
AS22759/80B
Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Light Weight, Tin Coated, Copper Conductor, 150 °C, 600 Volts
  DEC 2006 / B
AS22759/90B
Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Nickel Coated, High Strength or Ultra High Strength Copper Alloy, 260 °C, 600 Volts
  DEC 2006 / B
AS22759/85B
Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Tin Coated, Copper Conductor, 150°C, 600 Volts
  DEC 2006 / B
ARP5107B
Guidelines for Time-Limited-Dispatch (TLD) Analysis for Electronic Engine Control Systems
  NOV 2006 / B
AS27429A
Splice, Conductor, Disconnect, Crimp Style, Copper, Insulated Barrel, Type II, Class 1 for 105°C Total Conductor Temperature
  OCT 2006 / A
AS25436A
Terminal-Lug, Crimp Style, 90° Upright Type, for Aluminum Aircraft Wire, Class 1
  OCT 2006 / A
AS25435A
Terminal-Lug, Crimp Style, Straight Type, For Aluminum Aircraft Wire, Class 1
  OCT 2006 / A
AS87132
Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application to Fasteners
  SEP 2006
AMSB8964A
Beryllium Sheet and Plate, General Requirements for
  SEP 2006 / A
ARP4835
Aerospace Fluid Power-Hydraulic Thermal Expansion Relief Valves
  SEP 2006
AIR5696
Aerospace Fluid Power - FAA Regulatory History - Transport Airplane Hydraulic Systems
  SEP 2006
AS5832
Assembled Coupling Components, Threadless-Flexible, Fixed Cavity, Current Carrying, Self Bonding
  SEP 2006
AS5831
Assembled Coupling, Threadless-Flexible, Fixed Cavity, Current Carrying, Self Bonding, Envelope Dimensions
  SEP 2006
AS5830
Coupling Assembly, Threadless, Flexible, Fixed Cavity, Current Carrying, Self-Bonding, Procurement Specification
  SEP 2006
AS5835
Coupling Body, Threadless-Flexible, Fixed Cavity, Current Carrying, Self Bonding
  SEP 2006
AS5839
Female Ferrule, Threadless-Flexible, Fixed Cavity, Current Carrying, Self Bonding, Butt Welded
  SEP 2006
AS5838
Female Ferrule, Threadless-Flexible, Fixed Cavity, Current Carrying, Self Bonding, Swaged
  SEP 2006
AS5836
Fitting End, Threadless-Flexible, Fixed Cavity, Current Carrying, Self Bonding Male and Female Design Standard
  SEP 2006
AS5837
Male Ferrule, Threadless-Flexible, Fixed Cavity, Current Carrying, Self Bonding, Butt Welded
  SEP 2006
AS5833
Male Ferrule, Threadless-Flexible, Fixed Cavity, Current Carrying, Self Bonding, Swaged
  SEP 2006
AS5834
Sleeve, Threadless-Flexible, Fixed Cavity, Current Carrying, Self Bonding
  SEP 2006
AS1791D
Wire, Retainer - Tube Coupling Nut
  SEP 2006 / D
AMS5837G
Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 62Ni - 21.5Cr - 9.0Mo - 3.7Cb(Nb)
  SEP 2006 / G
AS1714D
Nut Assembly, Coupling, Flexible, Variable Cavity, Threaded, Ferrule Type Tube Ends
  AUG 2006 / D
AS5529
Sleeve, Flareless Tube Fitting, Internally Swaged
  AUG 2006
AS5530
Union, Flareless Tube Fitting, Internally Swaged
  AUG 2006
AS5531
Union, Short Flareless Tube Fitting, Internally Swaged
  AUG 2006
AS5791
Fitting Assembly, Adapter, Bulkhead Flareless, Axially Swaged, Hydraulic
  AUG 2006
AS5955B
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 275°F, 5080 psi, Flareless, Titanium Fittings, 45° to 45°
  AUG 2006 / B
AS9318A
Rivet, Solid - 100° Flush Head, AMS 7233
  AUG 2006 / A
AS9319A
Rivet, Solid - Universal Head, Monel UNS N04400
  AUG 2006 / A
AS123451B
Rivet, Solid, 100° Flush Head, AMS 7229
  AUG 2006 / B
AS123151A
Rivet, Universal Head, High Temperature, 347 Cres UNS S34700
  AUG 2006 / A
AS9294A
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .1900-32 UNJF-3A
  JUL 2006 / A
AS9297A
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .3750-24 UNJF-3A
  JUL 2006 / A
AS9286A
Bolt, Machine - Hexagon Head, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .3750-24 UNJF-3A
  JUN 2006 / A
AS5452A
Night Vision Goggles (NVG) Compatible Lighting for Civil Aircraft
  JUN 2006 / A
AMS2759/10A
Automated Gaseous Nitriding Controlled by Nitriding Potential
  JUN 2006 / A
ARP4822
Night Vision Imaging System (NVIS) Compatible Illuminated Pushbutton Switches and Indicators
  JUN 2006
AS18280/2A
Sleeve, Internally or Externally Swaged or Welded, 24° Cone Flareless Fitting, 3000 psi
  JUN 2006 / A
AS5443A
Wrenching Element, Spline Drive - Dimensions For
  JUN 2006 / A
AS5793
Fitting Assembly, Straight, Male Flareless, Axially Swaged, Hydraulic
  JUN 2006
AIR5883
Landing Gears Shock Struts Bearing Selection
  MAY 2006
AMST9046B
Titanium and Titanium Alloy, Sheet, Strip, and Plate
  MAY 2006 / B
AS152901A
Stud, Stepped, Drilled 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .3125-18 UNS X .2500-28 UNF-3A
  MAY 2006 / A
AS5620A
Titanium Hydraulic Tubing, Ti-3al-2.5v Cold Worked and Stress Relieved, Up to 35,000 Kpa (5080 Psi) Requirements for Qualification Testing and Control
  MAR 2006 / A
AS5973
Fitting Assembly, Cross, Axially Swaged, Hydraulic, 5080 Psi
  JAN 2006
AS51990A
Ring, Lock, Serrated
  DEC 2005 / A
AIR5451
A Guide to Landing Gear System Integration
  DEC 2005
AS5828
Fitting End, Bulkhead, Flareless, Extra Fine Thread, Design Standard
  DEC 2005
AS5861
Retainer, (Back-Up Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Static Gland
  DEC 2005
ARP5607A
Legibility of Print on Aerospace Wires and Cables
  NOV 2005 / A
AS51997B
Ring, Lock, Serrated-High Strength
  OCT 2005 / B
AS9515A
Cushion, Loop Clamp - Multiple, 2-Tube, Ams 3677
  OCT 2005 / A
AS9514A
Cushion, Loop Clamp - Multiple, 3-Tube, Ams 3677
  OCT 2005 / A
AMS3218C
Fluorocarbon (FKM) Rubber, High-Temperature-Fluid Resistant, Low Compression, Set 85 to 95
  SEP 2005 / C
AMSR83248A
Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, and Compression Set Resistant
  SEP 2005 / A
AS85049/134
Connector Accessories, Fiber Optic Backshells Filler Plug, Category 7
  SEP 2005
AMS5032G
Wire, Steel, 0.18 - 0.23C (SAE 1020), Annealed
  AUG 2005 / G
AS16842A
Clamp, Wire, Rope, Saddled, Single Grip, Steel
  AUG 2005 / A
AS91761A
Plug, Expansion - Tapered, AMS 5040
  AUG 2005 / A
AS24563B
Flange Profiles, V-Coupling, Design Standard
  AUG 2005 / B
ARP5146
Assessment of Aircraft Wheel Sealing Systems
  JUL 2005
AS24462A
Bearing, Roller, Needle, Single Row, Thin Shell, Type II, Antifriction
  JUL 2005 / A
AS91641A
Pin, Straight, Headless, Oversize, Steel, UNS G10950
  JUL 2005 / A
AS15000A
Fitting End, Lubrication, Hydraulic - Design Standard
  JUL 2005 / A
AS5878
Nut, Self-Locking, Nickel Alloy, UNS N07001, 1400 °F, 180,000 psi, UNJ Thread, Procurement Specification
  JUN 2005
AS5202A
Port Or Fitting End, Internal Straight Thread, Design Standard
  MAY 2005 / A
AS85049/131
Connector Accessories, Fiber Optic Backshell, Straight, Self- Locking Category 3b for Mil-Dtl-38999 Series Iii & SAE as 5590/1 Connectors
  MAY 2005
AS4751/1
Coupling, Sheet Metal, 40° V-Band, Wide, Standard Latch
  APR 2005
AS4751/2
Flange, Sheet Metal, Wide
  APR 2005
ARP5936
Landing Gear Storage
  APR 2005
ARP5637
Design and Maintenance Considerations for Aircraft Exterior Lighting Plastic Lenses
  MAR 2005
AS5586
Aerospace - General Requirements for Hydraulic System Reservoirs
  FEB 2005
AS8049B
Performance Standard for Seats in Civil Rotorcraft, Transport Aircraft, and General Aviation Aircraft
  JAN 2005 / B
AS21429A
Bearing, Roller, Antifriction, Rod End, External Thread, Self-Aligning, Air Frame, -67°F, to 350°F Type 1, Heavy Duty, Sealed
  NOV 2004 / A
AS85049/127A
Connector Accessories, Electrical, Bushing Strip Category 7 (For Use With SAE as 85049/118, /120, /121, /123, /124, /126)
  NOV 2004 / A
AS20005
Drive - Type XV Engine Accessory - Design Standard For
  SEP 2004
AS20010
Drive - Type XX Engine Accessory - Design Standard For
  SEP 2004
AS5688A
Cable Assemblies; Aircraft, Proof Testing and Prestretching Of
  AUG 2004 / A
AS55151A
Pump, Hydraulic, Ram, Hand Driven
  AUG 2004 / A
AS9371B
Gasket - Metal O-Ring, .035 Tube X .006 Wall, Silver Plated, Cres - Uns S32100
  JUL 2004 / B
AS9372B
Gasket - Metal O-Ring, .062 Tube X .006 Wall, Silver Plated Cres - Uns S32100
  JUL 2004 / B
AS9374B
Gasket - Metal O-Ring, .094 Tube X .006 Wall, Silver Plated Cres - Uns S32100
  JUL 2004 / B
AS9375B
Gasket - Metal O-Ring, .094 Tube X .010 Wall, Silver Plated Cres - Uns S32100
  JUL 2004 / B
AS9376B
Gasket - Metal O-Ring, .125 Tube X .010 Wall, Silver Plated Cres - Uns S32100
  JUL 2004 / B
AS5104A
Plugs, Port Connection, Ring Locked, As1300 Port, Installation and Removal Of
  JUL 2004 / A
AS28912B
Bearing, Roller, Self-Aligning, Single Row Airframe, Anti-Friction, Sealed, Type I
  JUL 2004 / B
AS81099
Electric Devices, Simple, General Specification For
  JUN 2004
AS91601B
Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Black Oxide, Steel, Uns G87400, 125 Ksi Min, .375-24, Unf-3a
  MAY 2004 / B
AS25427
Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect
  MAY 2004
AS9000A
Aerospace Basic Quality System Standard
  FEB 2004 / A
AIR825/6
On Board Oxygen Generating Systems (Molecular Sieve)
  JAN 2004
AIR5121A
Software Supportability - An Overview
  JAN 2004 / A
AS9000-APPNDX1A
AS9000 Audit Summary and Supplier Profile Instructions
  DEC 2003 / A
AS91721A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .375-24 UNF-3A
  NOV 2003 / A
AS14237A
Bushing, Sleeve Plain, Press Fit, Ream Type
  NOV 2003 / A
AS91691A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .1900-32 UNF-3A
  OCT 2003 / A
AS91701A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .2500-28 UNF-3A
  OCT 2003 / A
AS91711A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .3125-24 UNF-3A
  OCT 2003 / A
AS5449
Fitting End, Weld Ring, Short Tapered, Design Standard
  SEP 2003
AS9433B
Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .2500-28 UNJF-3A
  SEP 2003 / B
ARP4988
Procedure for Determining Thrust Wire Lengths and Minimum Insertion Depths
  AUG 2003
AS85449/5
Clamp Assembly, Saddle Type, Cushioned, Fire Resistance, Low Smoke Density and Toxicity
  AUG 2003
AS85449/1
Clamp Assembly, Saddle Type, Cushioned, Fuel and Petroleum Based Hydraulic Fluid
  AUG 2003
AS85449/3
Clamp Assembly, Saddle Type, Cushioned, High Temperature
  AUG 2003
AS85449/4
Clamp Assembly, Saddle Type, Cushioned, PTFE
  AUG 2003
AS85449/2
Clamp Assembly, Saddle Type, Cushioned, Phosphate Ester Fluid Resistant
  AUG 2003
AS5166A
Fitting, Tee, Air Pressure Gage
  AUG 2003 / A
AS5206A
Nut, Flared, Long
  AUG 2003 / A
AS5170
Fitting, Plug, Port, Straight Thread, O-Ring Seal
  JUL 2003
AS9058B
Ring - Back-Up, Boss Connection, AMS 3652, AMS 3656, AMS 3660, AMS 3667
  JUN 2003 / B
AS24585B
Spring, Helical, Compression: For Loads Below 20 Pounds
  JUN 2003 / B
AS7365/6
Band, Female Coupling, 12 Inch Air Duct
  JUN 2003
AS7365/8
Band, Female Coupling, 6 Inch Air Duct
  JUN 2003
AS7365/7
Band, Male Coupling, 12 Inch Air Duct
  JUN 2003
AS7365/9
Band, Male Coupling, 6 Inch Air Duct
  JUN 2003
AS7365/2
Coupling, Female, 12 Inch Air Duct
  JUN 2003
AS7365/4
Coupling, Female, 6 Inch Air Duct
  JUN 2003
AS7365/3
Coupling, Male, 12 Inch Air Duct
  JUN 2003
AS7365/5
Coupling, Male, 6 Inch Air Duct
  JUN 2003
AS7365
Duct Assembly, Ground, Conditioned Air, Metallic Reinforced, Low Pressure, 350 °F
  JUN 2003
AS7365/1
Pin, Female Coupling
  JUN 2003
AS9399A
Bolt, Tee Head - Cadmium Plated, Steel, UMS G87400, 125 ksi min, Chamfered, .3125-24 UNJF-3A
  JUN 2003 / A
AS9400A
Bolt, Tee Head - Cadmium Plated, Steel, UNS G87400, 125 ksi min, Chamfered, .3750-24 UNJF-3A
  JUN 2003 / A
AS9402A
Bolt, Tee Head - Cadmium Plated, Steel, UNS G87400, 125 ksi min, Chamfered, .5000-20 UNJF-3A
  JUN 2003 / A
AS9401A
Bolt, Tee Head - Cadmium Plated, Steel, Uns G87400, 125 Ksi Min, Chamfered, .4375-20 Unjf-3a
  JUN 2003 / A
AS126587A
Stud - Straight, Cadmium Plated, Steel, UNS G87400, 125 ksi min, .3750 - 16 NS x .3750 - 24 UNF-3A
  JUN 2003 / A
AIR825/12A
Oxygen System Integration and Performance Precautions
  MAR 2003 / A
AIR825/5A
Liquid Oxygen Systems
  MAR 2003 / A
AIR5926
White Paper to Support Supersession of MIL-S-8879C With AS8879C
  MAR 2003
ARP5448/5
Plain Bearing No-Load Rotational Breakaway Torque Measurement
  MAR 2003
AS5419/7
WIRE, THERMOCOUPLE, FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, NORMAL WEIGHT, 260 °C
  FEB 2003
AS5419
Cable, Thermocouple Extension, Shielded and Unshielded
  FEB 2003
AS5419/4
WIRE, THERMOCOUPLE, CROSSLINKED POLYALKENE INSULATED NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 150 °C
  FEB 2003
AS5419/2
WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, ABRASION RESISTANT, EXTRUDED PTFE NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION MEDIUM WEIGHT, 260 °C
  FEB 2003
AS5419/5
WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN), THERMOCOUPLE EXTENSION, 200 °C
  FEB 2003
AS5419/3
WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, EXTRUDED TFE NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 °C
  FEB 2003
AS5419/6
WIRE, THERMOCOUPLE, FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 260 °C
  FEB 2003
AS5419/1
WIRE, THERMOCOUPLE, HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT, SMALL DIAMETER NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 °C
  FEB 2003
ARP598C
Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems
  JAN 2003 / C
AIR825/13
Guide for Evaluating Combustion Hazards in Aircraft Oxygen Systems
  JAN 2003
AS14227B
Lock, Rod End, Improved Strength, NAS Lug
  JAN 2003 / B
AIR5386
Hose and Hose Assembly Selection, Installation, Inspection and Maintenance Guidelines, Listing of
  NOV 2002
AS24466
Bearing, Roller, Needle-Double Row, Heavy Duty, Track Roller, Type Vi, Antifriction, Inch
  NOV 2002
AS24465
Bearing, Roller, Needle-Single Row, Heavy Duty, Track Roller, Type V, Antifriction, Inch
  NOV 2002
AIR825/8
Continuous Flow Oxygen Systems
  OCT 2002
ARP5507
Aircraft Tire-to-Wheel Performance Characteristics
  AUG 2002
AIR825/4A
Chemical Oxygen Systems
  AUG 2002 / A
AIR825/11A
Closed-Cycle Protective Breathing Devices
  AUG 2002 / A
AIR825/10A
Protective Breathing Equipment for Flight Deck and Cabin Crew Members
  AUG 2002 / A
AS6625A
Spray Equipment, Aircraft Windshield, Anti-Icing
  AUG 2002 / A
AS1861A
Nut, Sleeve Coupling, Tube Reducer, Flared
  JUL 2002 / A
AS1860A
Nut, Sleeve Coupling, Tube Reducer, Flareless
  JUL 2002 / A
AIR5575
Hot Stamp Wire Marking Concerns for Aerospace Vehicle Applications
  JUN 2002
AIR5464
Metal Clad Fibers for Electrical Shielding & Harness Overbraid
  JUN 2002
ARP5448/4
Plain Bearing Bond Integrity - Peelable Woven Fabric PTFE Liners
  JUN 2002
AS5902
Installation of Externally Swaged Fittings
  MAY 2002
AIR1093A
Numeral, Letter and Symbol Dimensions for Aircraft Instrument Displays
  MAY 2002 / A
ARP5311
Aerospace-Interface Definition for Mechanical Actuation Subsystems
  APR 2002
ARP5584
Document for Electric Power Management
  MAR 2002
AS85848/1
Sleeving, for Identification Marking - Heat Shrinkable, Polyolefin, Flexible
  MAR 2002
AS85848
Sleeving, for Identification Marking, Heat Shrinkable, General Specification For
  MAR 2002
AS85848/2
Sleeving, for Identification Marking, Heat Shrinkable, Polyvinylidene Fluoride, Flexible
  MAR 2002
AS9587A
Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .4375-20 UNJF-3A
  MAR 2002 / A
AS17845
Shield for Use With MS90362 - External Power Receptacles
  MAR 2002
AS210041
Canister, Lithium Hydroxide, Screened Ends, Friction Type Covers
  FEB 2002
AS85421/1
Fitting End, Standard Dimensions for Dynamic Beam Seal, Male
  FEB 2002
AS28937
Fuse, Limiter Type, Enclosed Link, 5-60 Amp, Aircraft
  FEB 2002
AS28938
Fuse, Limiter Type, Enclosed Link, Intermediate Rating, Aircraft
  FEB 2002
AS85352
Inflator Assembly and Gage Elements, Pneumatic Pressure, Remote Control, Direct Reading
  FEB 2002
AS81765/4
Insulating Components, Molded, Electrical, Heat Shrinkable Fluoroelastomer, Flexible, Crosslinked
  FEB 2002
AS81765/7
Insulating Components, Molded, Electrical, Heat Shrinkable Fluoropolymer Composite, Semi-Rigid, Crosslinked
  FEB 2002
AS81765/6
Insulating Components, Molded, Electrical, Heat Shrinkable Fluoropolymer, Semi-Rigid, Crosslinked
  FEB 2002
AS81765/2
Insulating Components, Molded, Electrical, Heat Shrinkable Polychloroprene, Flexible, Crosslinked
  FEB 2002
AS81765/1
Insulating Components, Molded, Electrical, Heat Shrinkable Polyolefin, Crosslinked, Semi-Rigid and Flexible
  FEB 2002
AS81765/3
Insulating Components, Molded, Electrical, Heat Shrinkable Silicone Rubber, Flexible, Crosslinked
  FEB 2002
AS81765
Insulating Components, Molded, Electrical, Heat Shrinkable, General Specification For
  FEB 2002
ARP688A
Reusable Lock for Spanner Nuts
  FEB 2002 / A
AS25438
Terminal-Lug, Crimp Style, Right Angle Type, for Aluminum Aircraft Wire, Class 1
  FEB 2002
AIR5273
Actuation System Failure Detection Methods
  DEC 2001
ARP4256A
Design Objectives for Liquid Crystal Displays for Part 25 (Transport) Aircraft
  DEC 2001 / A
AIR825/1
Introduction to Oxygen Equipment for Aircraft
  DEC 2001
ARP5824
Recommended Solid Film Lubricants for Fluid System Components
  DEC 2001
AS7413
Coupling Assemblies, Quick Disconnect, Automatic Shutoff
  DEC 2001
AS529A
Adapter - 10.000 Bolt Circle to 6.500 Pilot Diameter - Qad
  OCT 2001 / A
AS530A
Adapter - 8.000 Bolt Circle to 4.125 Pilot Diameter - Qad
  OCT 2001 / A
ARP419A
Automatic Pilot Installations
  OCT 2001 / A
AS90708
Ring, Retaining, External, Interlocking
  OCT 2001
AS439A
Stall Warning Instrument (Turbine Powered Subsonic Aircraft)
  OCT 2001 / A
ARP1515A
Threaded Fastener Protrusion Through Self-Locking Nuts
  OCT 2001 / A
ARP433A
Liquid Oxygen Quantity Instruments
  SEP 2001 / A
AIR5426
Fitting and Fitting Assembly Selection, Installation, Inspection and Maintenance Of
  AUG 2001
AS24335
Flange, Bulkhead Mounting, Hydraulic Self-Sealing Coupling
  AUG 2001
AS9362A
Nut, Plain, Hexagon, Check - UNS S66286, 130 ksi Min, Silver Plated
  AUG 2001 / A
AIR818D
Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards For
  JUL 2001 / D
ARP794A
Airstream Deviation Instrument (ADI)
  JUL 2001 / A
AS412B
Carbon Monoxide Detector Instruments
  JUL 2001 / B
AS400B
Cargo Compartment Fire Detection Instruments (Reciprocating Engine Powered Aircraft)
  JUL 2001 / B
ARP426A
Compass System Installations
  JUL 2001 / A
AS398B
Direction Instrument, Magnetic, Non-Stabilized Type (Magnetic Compass)
  JUL 2001 / B
AS404C
Electric Tachometer: Magnetic Drag (Indicator and Generator)
  JUL 2001 / C
ARP5429
Landing Gear Fatigue Tests With Equivalent Damage Spectra
  JUL 2001
AS9363A
Nut, Slotted, Hexagon, Shear - UNS S66286, 130 ksi min
  JUL 2001 / A
AS408C
Pressure Instruments - Fuel, Oil, and Hydraulic (Reciprocating Engine Powered Aircraft)
  JUL 2001 / C
ARP427A
Pressure Ratio Instruments
  JUL 2001 / A
AS81714/27
TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, GROUNDING MODULES, STUD TYPE MOUNTING, SERIES I
  JUL 2001
AS81714/22
Terminal Junction System, Terminal Junction Blocks, Electronic, In-Line Junction, Integral Resistor, Series I
  JUL 2001
AS81714/21
Terminal Junction System, Terminal Junction Blocks, Electronic, In-Line Junctions, Integral Diode, Series I
  JUL 2001
AS81714/31
Terminal Junction System, Terminal Junction Blocks, Electronic, Modules, Feedback Type, Sizes 20-6, 20-7, 20-8 Horizontal Mounting With Integral Bracket, Series I
  JUL 2001
AS81714/28
Terminal Junction System, Terminal Junction Blocks, Grounding Modules, Integral Bracket Mounting, Series I
  JUL 2001
AS81714/24
Terminal Junction System, Terminal Junction Blocks, Sectional, Electronic, In-Line Junctions, Double, Integral Diode(s), Series I
  JUL 2001
AS81714/20
Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Size 12, Series I
  JUL 2001
AS81714/19
Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Size 16, Series I
  JUL 2001
AS81714/18
Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Size 20, Series I
  JUL 2001
AS81714/25
Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Size 20-1, Series I
  JUL 2001
AS81714/26
Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Size 20-2, Series I
  JUL 2001
AS81714/30
Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Sizes 20-3, 20-4, 20-5 Vertical Mounting With Integral Bracket, Series I
  JUL 2001
AS81714/29
Terminal, Junction System, Bracket, Block Mounting, Series I
  JUL 2001
AS18607A
Thermal Anti-Icing Equipment, Wing and Empennage
  JUL 2001 / A
AS793A
Total Temperature Measuring Instruments (Turbine Powered Subsonic Aircraft)
  JUL 2001 / A
AS22759/19
Wire, Electric, Fluoropolymer-Insulated, Extruded ETFE, Light Weight, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt, 150°C
  JUL 2001
AS22759/18
Wire, Electric, Fluoropolymer-Insulated, Extruded ETFE, Light Weight, Tin-Coated Copper Conductor, 600-Volt, 150°C
  JUL 2001
AS22759/17
Wire, Electric, Fluoropolymer-Insulated, Extruded ETFE, Medium Weight, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt, 150°C
  JUL 2001
AS22759/16
Wire, Electric, Fluoropolymer-Insulated, Extruded ETFE, Medium Weight, Tin-Coated Copper Conductor, 600-Volt, 150°C
  JUL 2001
AS22759/21
Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Nickel-Coated High Strength Copper Alloy Conductor, 1000-Volt
  JUL 2001
AS22759/23
Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Nickel-Coated High Strength Copper Alloy Conductor, 600-Volt
  JUL 2001
AS22759/29
Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Polyimide Coated, Nickel-Coated Copper Conductor, 600-Volt
  JUL 2001
AS22759/31
Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Polyimide Coated, Nickel-Coated High Strength Copper Alloy Conductor, 600-Volt
  JUL 2001
AS22759/28
Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Polyimide Coated, Silver-Coated Copper Conductor, 600-Volt
  JUL 2001
AS22759/30
Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Polyimide Coated, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt
  JUL 2001
AS22759/20
Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Silver-Coated High Strength Copper Alloy Conductor, 1000-Volt
  JUL 2001
AS22759/22
Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt
  JUL 2001
AS22759/15
Wire, Electric, Fluoropolymer-Insulated, FEP-PVF2, Light Weight, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt
  JUL 2001
AS50861/4
Wire, Electrical, Polyvinyl Chloride Insulated, Nylon Jacket, Tin-Coated Copper Conductor, 3000-Volt, 105°C
  JUL 2001
AS50861/2
Wire, Electrical, Polyvinyl Chloride Insulated, PVC-Glass-Nylon, Tin-Coated Copper Conductor, 600-Volt, 105°C
  JUL 2001
AS50861/3
Wire, Electrical, Polyvinyl Chloride Insulated, PVC-Glass-PVC-Nylon, Tin-Coated Copper Conductor, 600-Volt, 105°C
  JUL 2001
AS50861/6
Wire, Electrical, Polyvinyl Chloride Insulated, Polyvinylidene Fluoride Jacket, Silver-Coated Copper Alloy Conductor, 600-Volt, 110°C
  JUL 2001
AS50861/5
Wire, Electrical, Polyvinyl Chloride Insulated, Polyvinylidene Fluoride Jacket, Tin-Coated Copper Conductor, 600-Volt, 110°C
  JUL 2001
AS9356B
Nut, Plain, Hexagon, UNS S66286
  MAY 2001 / B
ARP5288
Transport Category Airplane Head Up Display (HUD) Systems
  MAY 2001
AS4589
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 °F, Titanium Fittings, Beam Seal, 45° to 45°
  MAR 2001
AS4590
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 °F, Titanium Fittings, Beam Seal, 45° to 90°
  MAR 2001
AS4591
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 °F, Titanium Fittings, Beam Seal, 90° to 90°
  MAR 2001
AS4587
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 °F, Titanium Fittings, Beam Seal, Straight to 45°
  MAR 2001
AS4588
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 °F, Titanium Fittings, Beam Seal, Straight to 90°
  MAR 2001
AS4586
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 °F, Titanium Fittings, Beam Seal, Straight to Straight
  MAR 2001
AS4584
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 °F, Titanium Fittings, Flareless, 45° to 45°
  MAR 2001
AS4583
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 °F, Titanium Fittings, Flareless, 45° to 90°
  MAR 2001
AS4582
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 psi, 275 °F, Titanium Fittings, Flareless, Straight to 90°
  MAR 2001
AS515A
Adapter 10" to 5" Bolt Circle
  JAN 2001 / A
AS516A
Adapter 10" to 8" Bolt Circle
  JAN 2001 / A
AS517A
Adapter 8" to 5" Bolt Circle
  JAN 2001 / A
AS470C
Drive - Accessory, 10" Bolt Circle
  JAN 2001 / C
AS468C
Drive - Accessory, 5" Bolt Circle
  JAN 2001 / C
AS473C
Flange - Accessory, 10" Bolt Circle
  JAN 2001 / C
AS471C
Flange - Accessory, 5" Bolt Circle
  JAN 2001 / C
AS472C
Flange - Accessory, 8" Bolt Circle
  JAN 2001 / C
AS1975SUP1
Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275°F, Standard Duty, Hydraulic, Aircraft Systems, (Supplement 1)
  JAN 2001
AS3071B
Acceptance Criteria - Magnetic Particle, Fluorescent Penetrant, and Contrast Dye Penetrant Inspection
  DEC 2000 / B
AS5447
Acceptance Criteria for Nuts - Magnetic Particle, Fluorescent Penetrant, and Visible Penetrant Examination
  DEC 2000
AIR5354
History of the SAE A-10 Aircraft Oxygen Equipment Committee
  DEC 2000
ARP1192C
Procedure for Calibration and Verification of a Liquidborne Particle Counter: An Absolute Standard
  NOV 2000 / C
AS39029/102
Contacts, Electrical Connector, Pin, Crimp Removable, Coaxial, Size 12 (For Mil-C-38999 Series I, Ii, Iii and Iv Connectors)
  SEP 2000
AS39029/103
Contacts, Electrical Connector, Socket, Crimp Removable, Coaxial, Size 12 (For Mil-C-38999 Series I, Iii, and Iv Connectors)
  SEP 2000
AS22759/8
Wire, Electric, Fluoropolymer-Insulated, Abrasion Resistant Extruded PTFE, Medium Weight, Nickel-Coated Copper Conductor, 600 Volt
  SEP 2000
AS22759/7
Wire, Electric, Fluoropolymer-Insulated, Abrasion Resistant Extruded PTFE, Medium Weight, Silver-Coated Conductor, 600 Volt
  SEP 2000
AS22759/14
Wire, Electric, Fluoropolymer-Insulated, FEP-PVF2, Light Weight, Tin-Coated Copper Conductor, 600-Volt
  SEP 2000
AS22759/13
Wire, Electric, Fluoropolymer-Insulated, FEP-PVF2, Medium Weight, Tin-Coated Copper Conductor, 600-Volt
  SEP 2000
AS22759/4
Wire, Electric, Fluoropolymer-Insulated, TFE-Glass-FEP, Medium Weight, Silver-Coated Copper Conductor, 600-Volt
  SEP 2000
AS22759/3
Wire, Electric, Fluoropolymer-Insulated, TFE-Glass-TFE, Medium Weight, Nickel-Coated Copper Conductor, 600-Volt
  SEP 2000
AS22759/6
Wire, Electrical, Fluorocarbon-Insulated, Abrasion Resistant Extruded PTFE, Nickel-Coated Copper Conductor, 600 Volt
  SEP 2000
AS22759/5
Wire, Electrical, Fluoropolymer-Insulated, Abrasion Resistant Extruded PTFE, Silver-Coated Copper Conductor, 600 Volt
  SEP 2000
AS22759/10
Wire, Electrical, Fluoropolymer-Insulated, Extruded TFE, Nickel-Coated Copper Conductor, 1000 Volt
  SEP 2000
AS22759/12
Wire, Electrical, Fluoropolymer-Insulated, Extruded TFE, Nickel-Coated Copper Conductor, 600 Volt
  SEP 2000
AS22759/9
Wire, Electrical, Fluoropolymer-Insulated, Extruded TFE, Silver-Coated Copper Conductor, 1000 Volt
  SEP 2000
AS22759/11
Wire, Electrical, Fluoropolymer-Insulated, Extruded TFE, Silver-Coated Copper Conductor, 600 Volt
  SEP 2000
AS22759/2
Wire, Electrical, Fluoropolymer-Insulated, PTFE and PTFE-Coated Glass, Nickel-Coated Copper Conductor, 600-Volt
  SEP 2000
AS22759/1
Wire, Electrical, Fluoropolymer-Insulated, PTFE and PTFE-Coated Glass, Silver-Coated Copper Conductor, 600-Volt
  SEP 2000
AS7468B
Bolts, Cobalt-Chromium-Nickel Alloy, Uns R30035, Tensile Strength 260 Ksi, Procurement Specification
  AUG 2000 / B
AS14298
Clamp Assembly, Cushioned, Metric
  AUG 2000
AS14241
Clamp, Loop Type, Cushioned Support, Metric
  AUG 2000
AS14242
Clamp, Loop, Cushioned, Center Mounting, Metric
  AUG 2000
AS14272
Clamp, Loop, Cushioned, Elongated, Metric
  AUG 2000
AS14489
Clamp, Loop, Metal, Plain, Support, Aircraft, Metric
  AUG 2000
AMSR83248/2
Rubber, Fluorocarbon Elastomer, High Temperature, Fluid and Compression Set Resistant (O-Rings, Class 2, 90 Hardness)
  AUG 2000
AIR4160A
Alternatives to Cadmium Plating
  JUN 2000 / A
AS22759/45
Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Lightweight, Nickel-Coated Copper, 200°C, 600 Volt
  JUN 2000
AS22759/46
Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Lightweight, Nickel-Coated High-Strength Copper Alloy, 200°C, 600 Volt
  JUN 2000
AS22759/44
Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Lightweight, Silver-Coated Copper, 200°C, 600 Volt
  JUN 2000
AS22759/33
Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Lightweight, Silver-Coated, High-Strength Copper Alloy, 200°C, 600 Volt
  APR 2000
AS22759/32
Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Lightweight, Tin-Coated Copper, 150°C, 600 Volt
  APR 2000
AS22759/41
Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Nickel-Coated Copper, 200°C, 600 Volt
  APR 2000
AS22759/42
Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Nickel-Coated High-Strength Copper Alloy, 200°C, 600 Volt
  APR 2000
AS22759/43
Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Silver-Coated Copper, 200°C, 600 Volt
  APR 2000
AS22759/35
Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Silver-Coated, High-Strength Copper Alloy, 200°C, 600 Volt
  APR 2000
AS22759/34
Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Tin-Coated Copper, 150°C, 600 Volt
  APR 2000
AS90328
Cable Assembly External Electric Power, Aircraft 115/200 Volt, 400 Hertz
  MAR 2000
AS81714/15
Terminal Junction System, Grounding Stud, Series I
  MAR 2000
AS81714/14
Terminal Junction System, Rack Assembly, Track, Feedthru Type, Light Weight, Series I
  MAR 2000
AS81714/10
Terminal Junction System, Rack Assembly, Track, Feedthru Type, Series I
  MAR 2000
AS5439
Adapter Reducer, Beam Seal - Port Connection, Ring Locked Design, Installation and Removal Of
  DEC 1999
AIR5378
Aircraft Tube Bending Methods, Techniques and Tooling
  DEC 1999
AS9761
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium Ams 4967, .3125-24 Unjf-3a
  DEC 1999
AS9958
Bolt, Machine, Hexagon Head, Drilled, 6 Hold, Pd Shank, Steel Ams 6322, Cadmium Plated, .250-28 Unjf-3a
  DEC 1999
AS9841
Key, Woodruff - Chamfered Cres Ams 5640
  DEC 1999
ARP5290
Laser Beam Divergence Measurements Techniques Comparison
  DEC 1999
AS9385
Packing, Performed, Ams 7267, O-Ring
  DEC 1999
AS124951
Rive - 100° Countersunk Head, Corrosion Resistant Steel
  DEC 1999
AS125401
Rivet - Universal Head, Corrosion Resistant Steel
  DEC 1999
AS9880
Washer, Cup, Lock - Cres Ams 5510
  DEC 1999
AMS5609D
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 12Cr - 0.12Cb (SAE 51410 Modified), Ferrite Controlled, Annealed
  OCT 1999 / D
AS2001A
Aerospace Fluid Systems and Components - Pressure and Temperature Classifications
  SEP 1999 / A
AS9770
Packing, Preformed - Ams 3650, `O Ring
  AUG 1999
AS9386
Packing, Preformed, Ams 7267, O-Ring
  AUG 1999
AS8662
Knife, Hunting, Sheathed, Survival, PilotS
  JUL 1999
AMSR83412/1
Rubber, Ethylene-Propylene, Hydrazine Resistant, O-Rings Sizes and Tolerances
  JUL 1999
AS22805
Spray Kit, Self Pressurized
  JUL 1999
ARP5119
Location of and Display Symbology Requirements for Head-Down Electronic Flight Displays for Steep IMC Approaches
  MAY 1999
AS49011
Rod End - Threaded, Aircraft
  MAY 1999
AS6302
Transmitter, Pressure, Fuel, 0-600 psi
  MAY 1999
AS6011
Cylinders, Carbon Dioxide Filled, Technical
  APR 1999
AS5944
Slings, Aircraft, General Specification For
  APR 1999
AIR5278
Composite and Bonded Structure Engineers: Training Document
  MAR 1999
AIR5279
Composite and Bonded Structure Inspector: Training Document
  MAR 1999
ARP5287
Optical Measurement Procedures for Airborne Head Up Display (HUD)
  MAR 1999
AS5203
Tube End, Double Flare, Design Standard
  JAN 1999
AS9966
Packing, Preformed - AMS 7273, Seal
  NOV 1998
AS25226
Link, Terminal, Connecting
  AUG 1998
AS8775
Hydraulic System Components, Aircraft and Missiles, General Specification For
  JUL 1998
AS9395
Backplate, Retaining Strap AMS 5510
  FEB 1998
AS9393
Cushion, Loop Clamp - Multiple, 2-Tube, AMS 3303
  FEB 1998
AS9394
Strap, Retaining-Multiple Tube, Detachable Cushion, AMS 5510
  FEB 1998
AS35051
Cover for Use With Ms90362 External Power Receptacle
  JAN 1998
AS5372
Fuse, Current Limiter Type, Aircraft
  DEC 1997
AS5778
Covers, Aircraft Components, General Requirements For
  AUG 1997
AS18259
Installation of Window Anti-Icing, De-Greasing, and Washing Systems (General Specification For)
  AUG 1997
AS33611
Tube Bend Radii
  AUG 1997
AS5135
Desiccant Port and Desiccant Holder
  JUL 1997
AIR4083A
Helicopter Power Assurance
  JUN 1997 / A
ARP4732
Cover Shipping Flexible (Nonreuseable)
  APR 1997
ARP4916
Masking and Cleaning of Epoxy and Polyester Matrix Thermosetting Composite Materials
  MAR 1997
ARP5256
Mixing Resins, Adhesives and Potting Compounds
  MAR 1997
AIR5080
Integration of Probabilistic Methods into the Design Process
  JAN 1997
AIR5145
Directory of Databases Part I - Whole Body Anthropometry Surveys
  DEC 1996
AS791
Remote Servoed Air Data Instruments for Subsonic Aircraft
  DEC 1996
ARP5089
Composite Repair Ndt/Ndi Handbook
  NOV 1996
AS1162
Attitude Instruments, Pitch and Roll, Part I, Minimum Performance Standard for Equipment
  OCT 1996
AS855
Minimum Performance Standard for Automatic Pressure Altitude Digitizer Equipment
  OCT 1996
AIR4730
Gse Training Videos
  SEP 1996
ARP4977
Drying of Thermosetting Composite Materials
  AUG 1996
AIR857A
Speed Variation of D-C Motors
  AUG 1996 / A
ARP4848
Flaring (Swaging) and Removal of Shank Nuts
  AUG 1995
AS3548
Basket, Removable Self-Locking Nut, UNS S66286
  MAY 1995
AS3549
Sleeve, Removable Self-Locking Nut, UNS S30403
  MAY 1995
ARP4102/7_APXC
Appendix C Electronic Display Symbology for Engine Displays
  SEP 1993 / C
AS4348
Adapter Assembly, Retained Nut to Boss
  AUG 1993
AS4316
Elbow Assembly 45°, Flared Tube to Retained Nut, for Seal Ring
  AUG 1993
AS4315
Elbow Assembly 90°, Flared Tube to Retained Nut, for Seal Ring
  AUG 1993
AS4304
Tee Assembly, Flared Tube, Retained Nut on Side, for Seal Ring
  AUG 1993
AS4347
Union Assembly, Double Retained Nut
  AUG 1993
AS4341
Wire, Retaining for Retained Nut
  AUG 1993
AS4302
Tee Assembly, Flared Tube, Retained Nut on Run, for Seal Ring
  AUG 1993
AIR4495
Helicopter Powerplant Corrosion Protection
  MAY 1993
AS4389
Nut - Self-Locking Clinch, Serrated Shank, Hole Preparation, Installation and Removal Procedures
  OCT 1992
ARP4729
Document for 270 Voltage Direct Current (270 V DC) System
  SEP 1992
AS101
Cross Assembly, Retained Nut, Short Flareless
  JUL 1992
AS4701
Wire, Retainer, Tube Coupling Nut, Short Flareless
  MAY 1992
AS1495A
Shaft Nut and Keywasher Installation Dimensions For
  MAR 1990 / A
ARP4102/7
Electronic Displays
  JUL 1988
AS3435
Spacer, Sleeve - For .190 Inch Bolt, AMS4901 or AMS4921
  SEP 1987
AS3436
Spacer, Sleeve - For .250 Inch Bolt, AMS4901 or AMS4921
  SEP 1987
AE4L-78
Lightning Test Waveforms and Techniques for Aerospace Vehicles and Hardware
  APR 1987
AS8008
Flight Director Equipment
  SEP 1984
ARP1352
Helicopter Mission Definition
  NOV 1982
AS1414
Propeller Shaft End - Flanged, 5.125 (130.175) Bolt Circle
  MAR 1977
AS880
Propeller Shaft End - Flanged 4.250 (107.95) Bolt Circle
  FEB 1974
AS417A
Air Data Computers, MPS
  SEP 1970 / A
AS1104
Single-Degree-of-Freedom Spring-Restrained Rate Gyros
  DEC 1969
AS413B
Temperature Instruments (Reciprocating Engine Powered Aircraft)
  DEC 1969 / B
ARP435
Overspeed Warning Instrument (Turbine Powered Subsonic Aircraft)
  JUL 1967
AS428
Exhaust Gas Temperature Instruments
  JUN 1966
AS919
Shallow Groove Shafts and Locking Devices for Bearing Retaining Spanner Nuts
  MAY 1966
ARP570A
Designation of Direction of Rotation of Helicopter Rotors
  APR 1965 / A
AS436
Mach Meters (Turbine Powered Subsonic Aircraft)
  FEB 1965
ARP497A
Precision Control Motors - 400 Cycles
  JAN 1965 / A
AS415
Altimeter, Pressure, Compensated (Turbine Powered Subsonic Aircraft)
  AUG 1964
AS429
Rate of Climb (Vertical Speed) Indicator, Pressure Actuated (Turbine Powered Subsonic Aircraft)
  AUG 1963
AS390
Pilot or Pitot-Static Pressure Tubes, Electrically Heated (Turbine Powered Sub-Sonic Aircraft)
  JUN 1963
AS462
Shafts for Ball Bearing Retaining Spanner Nuts and Key Washers
  SEP 1962
AS446
Cargo Compartment Fire Detection Instruments (Turbine Powered Subsonic Aircraft)
  MAR 1962
AS420B
Flight Directors (Reciprocating Engine Powered Aircraft)
  MAR 1962 / B
ARP727
Rate Gyro Assembly Configuration
  NOV 1961
AS418A
Maximum Allowable Airspeed Instruments (Reciprocating Engine Powered Aircraft)
  MAY 1961 / A
AS445
Fuel and Oil Quantity Instruments (Turbine Powered Subsonic Aircraft)
  APR 1961
AS430
Powerplant Fire Detection Instruments - Thermal and Flame Contact Types (Turbine)
  OCT 1960
AS396B
Bank and Pitch Instruments (Indicating Stabilized Type) (Gyroscopic Horizon, Attitude Gyro)
  JUL 1958 / B
AS394A
Rate of Climb Indicator, Pressure Actuated (Vertical Speed Indicator)
  JUL 1958 / A
AS236
Adapter, Thermo-Sensitive Element
  MAR 1948
ARP175
Temperature Measurement, Well Insert Type
  MAR 1948
AS196
Thermo-Sensitive Element (Iron - Constantan)
  MAR 1948
AS234
Thermo-Sensitive Element (Resistance Bulb Type)
  MAR 1948

SAE Foundation PRI SAE Industry Technologies Consortia - An affiliate of SAE International SAE Brasil SAE India A World In Motion