|
SAE 2013 World Congress & Exhibition
Technical Session Schedule
Wednesday, April 17
Thermal Systems Modeling and Simulation (Part 1)
(Session Code: HX102)
Room TBD 8:00 a.m.
The Thermal Systems Modeling and Simulation session focusses on state of the art simulation technologies for modeling thermal systems and their application in the development and optimization of vehicle thermal management and fuel economy. The papers in the session will range from empirical, 1D modeling methods to three dimensional CFD models as well as coupled methods.
Organizers - Ales Alajbegovic, Exa Corporation; Gursaran D. Mathur, CalsonicKansei North America Inc.; Kumar Srinivasan, Chrysler Group LLC
| Time |
Paper No. |
Title |
|
2013-01-0842
|
Numerical Investigation of Buoyancy Driven Flow in a Simplified Underhood with Open Enclosure
Kuo-huey Chen, General Motors LLC; James Johnson, General Motors LLC (retired); Parviz Merati, Western Michigan Univ; Charles davis, Western Michigan University
|
|
2013-01-0843
|
A Numerical Methodology to Compute Temperatures of a Rotating Cardan Shaft
Heinrich Reister, Ernst Peter Weidmann, Daimler AG; Thomas Walker, Sachin Badarayani, CD-adapco
|
|
2013-01-0844
|
A Comparison of Physiology-based Metrics to Environment-based Metrics for Evaluating Thermal Comfort
Mark Hepokoski, ThermoAnalytics Inc.; Allen Curran, Tony Schwenn, ThermoAnalytics Inc
|
|
2013-01-0849
|
Active Thermal Management Strategies for a V6 Diesel Engine using a Dual Mode Variable Speed Coolant Pump
Varun Negandhi, BorgWarner Inc; Dohoy Jung, Univ of Michigan-Dearborn; John Shutty, BorgWarner Inc
|
|
2013-01-0850
|
A New Automotive Air Conditioning System Simulation Tool Developed in Matlab/Simulink
Tibor Kiss, Larry Chaney, National Renewable Energy Laboratory; John Meyer, Visteon Climate Control
|
|
2013-01-0851
|
Simulations and Thermodynamic Analyses of a Topping Diesel Engine (DE) and a Bottoming Waste-Heat-Recovery (WHR) System based on Organic Rankine Cycle (ORC)
Ge-Qun Shu, Guopeng Yu, State Key Lab Of Engines; Hua tian, thtju@tju.edu.cn; Haiqiao Wei, State Key Lab Of Engines
|
|
2013-01-0854
|
A Design for Six Sigma (DFSS) Approach for Calibration/Validation of Hot-Soak Terminal Temperature of a Cabin CFD Model
Tao Ye, General Motors
|
|
2013-01-0855
|
A SIMPLE MODEL FOR CALCULATION OF VEHICLE THERMAL LOADS
Kaushal Kumar Jha, Viren Bhanot, Venkata ryali, Mahindra & Mahindra
|
|
2013-01-0856
|
Prediction of HVAC system aero/acoustic noise generation and propagation using CFD.
Mayur Sah, Kumar Srinivasan, Chrysler Group LLC; Fred Mendonca, Nachiket Pai, CD Adapco
|
|
2013-01-0857
|
Fuel economy impact of grille opening and engine cooling fan power on a mid-size sedan.
Bing Xu, Michael Leffert, Brian Belanger, General Motors
|
|
2013-01-0858
|
Thermodynamic analysis of a novel combined power and cooling cycle driven by the exhaust heat from a diesel engine
Hua Tian, tianjin university; Ge-Qun Shu, HaiQiao Wei, Xingyu Liang, Guopeng Yu, State Key Lab Of Engines
|
|
2013-01-0859
|
The Impact of Vehicle Front End Design on AC Performance
Ken Lan, Chrysler Corporation LLC; Ling Xiao, MEDA Limited; Kumar Srinivasan, Sadek S. Rahman, Chrysler Group LLC
|
|
2013-01-0861
|
Thermal modelling of the engine air intake system in a full vehicle model.
Wilko Jansen, Jaguar & Land Rover
|
|
2013-01-0864
|
Design of efficient air-conditioning systems for electric vehicles
Barbara Torregrosa-Jaime, Jorge Payá, Jose Corberan, Universidad Politecnica de Valencia
|
|
2013-01-0865
|
A Multi-Dimensional CFD-Chemical Kinetics Approach in Detection and Reduction of Knocking Combustion in Diesel-Natural Gas Dual-Fuel Engines Using Local Heat Release Analysis
Amin Maghbouli, National University of Singapore; Sina Shafee, Middle East Technical University; Rahim Khoshbakhti Saray, Sahand University of Technology; Wenming Yang, National University of Singapore; Vahid Hosseini, Sharif Univ of Technology; Hui An, National University of Singapore
|
|
2013-01-0867
|
Improving Air-Fuel Mixing in Diesel Engine Fuelled by Higher Viscous Fuel using Guide Vane Swirl and Tumble Device (GVSTD)
Idris Saad, Universiti Teknologi MARA; Saiful Bari, University of South Australia
|
|
2013-01-0868
|
A New Computational Tool for Automotive Thermal Comfort Simulation
Jiazhen Ling, University Of Maryland School of Enginee; Vikrant Aute, University Of Maryland College Park; Yunho Hwang, University Of Maryland School of Enginee; Reinhard Radermacher, University Of Maryland College Park
|
|
2013-01-0869
|
Interactions Between the Thermal Systems and the Drag Coefficient and their Impact on the Vehicle Energy Consumption
Samer Saab, Francois Charbonnelle, Valeo Thermal Systems; Jean-François Hetet, Alain Maiboom, Ecole Centrale De Nantes
|
|
2013-01-0870
|
Numerical simulation of warm-up characteristics and thermal management of a GDI Engine
Jesus Lahuerta; Stephen Samuel
|
|
2013-01-0873
|
Numerical Simulation of the Transient Heat-up of a Passenger Vehicle During a Trailer Towing Uphill Drive
Mario Disch, Nils Widdecke, Jochen Wiedemann, IVK / FKFS Univ. of Stuttgart; Heinrich Reister, Ernst Peter Weidmann, Daimler AG
|
|
2013-01-0874
|
PSO tuned Vehicle Climate System Model for HIL based ECU testing
Sufian Ashraf Mazhari, Saju Nampoothiri, Tata Elxsi, Ltd.
|
|
2013-01-0875
|
Factors Affecting Heat Transfer in a
Diesel Engine: Low Heat Rejection Engine Revisited
Sudhakar Das, Charles Roberts, Southwest Research Institute
|
|
2013-01-0877
|
Thermomechanical Stress Analysis of Vehicles Gray Cast Brake (Written Only -- No Oral Presentation)
Ali Belhocine, mechanical engineering; Adm mostefa bouchetara lng, Usto university
|
|
2013-01-0878
|
Organic Rankine Cycles with Dry Fluids for Small Engine Exhaust Waste Heat Recovery
(Written Only -- No Oral Presentation)
Charles Sprouse III, Christopher Depcik, University of Kansas
|
|
2013-01-0879
|
The Development of Exhaust Surface Temperature Models for 3D CFD Vehicle Thermal Management Simulations.
Part 1 - General Exhaust Configurations. (Written Only -- No Oral Presentation)
Kristian Haehndel, BMW Group - RMIT University; Torsten Frank, BMW; Frieder Martin Christel, Carsten Spengler PhD, Gerrit Suck, BMW Group; Sylvester Abanteriba, RMIT University
|
Planned by Thermal Management Activity / EMB Land and Sea Group
|
