SAE 2013 World Congress & Exhibition

Technical Session Schedule

Thursday, April 18

Advanced Battery Technologies (Part 6)
(Session Code: PFL103)

Room O2-44  1:00 p.m.

The success of HEV’s, PHEV’s & EV’s is highly dependent on their batteries. This session focuses on advanced battery technologies, including, but not limited to: advanced materials and cell chemistries, battery management systems and controls, modeling, testing, diagnosis and health monitoring, safety, reliability, durability, battery charging, battery economics/cost reduction, and system integration/optimization. These topics can be addressed at the cell, module, pack or vehicle levels.

Organizers - Wayne Cai, General Motors; Yi Ding, US Army; Xiaosong Huang, General Motors; Neil M. Johnson, Ricardo Inc.; Alvaro Masias, Ford Motor Co.; James Miller, Argonne National Laboratory; Thomas Wang, GM Technical Center; Xinran Xiao, Michigan State University

Time Paper No. Title
ORAL ONLY
Battery Tab Dynamics under Ultrasonic Welding
Bongsu Kang, Purdue Univ-Fort Wayne; Wayne Cai, General Motors; Chin-An Tan, Wayne State Univ
ORAL ONLY
Predicting Battery Pack Performance vs. Age Using Cell Data
Adam Timmons, Chrysler Group LLC
ORAL ONLY
Fee-based testing services for determining the vulnerability of high- voltage batteries.
David Lowry, Army Research Laboratory
ORAL ONLY
Safety Challenges of Liquid Cooled High Voltage Battery Systems
Galen Ressler, Mohammed Bahauddin, General Motors LLC
ORAL ONLY
Fast ion conducting electrolyte based on Li7La3Zr2O12 garnet: Enabling a new class of electrochemical energy storage
jeff sakamoto, msu
ORAL ONLY
Measurement of Thermal Contact Conductance between Battery Tabs
Jian Chen, Wei Zhang, Zhili Feng, Oak Ridge National Laboratory; Wayne Cai, General Motors
ORAL ONLY
Computer-Aided Engineering and Experimental Diagnostics of Vehicle Batteries
Chao-Yang Wang, Penn State Univ-University Park; Yan Ji; Wei Zhao; Lei Cao
ORAL ONLY
Requirements for Testing Lithium Batteries for Transportation
Alyssa Chiazim
ORAL ONLY
Catastrophic Failures in Lithium-Ion Battery Packs Used in EV and Hybrid Vehicles
Vijay Somandepalli, Exponent Inc; Kevin Marr, Exponent Inc; Quinn Horn, Exponent Inc
ORAL ONLY
Battery Life Prognostic Framework and Application to Lithium-Ion Graphite/Iron-Phosphate Chemistry
Kandler Smith, Eric Wood, Ahmad Pesaran, National Renewable Energy Laboratory
ORAL ONLY
Application Enabling LTO Based Batteries: Technical and Cost Benefits for Motive Applications
Evan House, EIG; Timothy E. Coogan, EIG America Inc.
2013-01-1519
A ’microscopic‘ structural mechanics FE model of a lithium ion pouch cell for quasi-static load cases
Christoph Breitfuss, Wolfgang Sinz, Florian Feist, Gregor Gstrein, Bernhard Lichtenegger, Christoph Knauder, Christian Ellersdorfer, Joerg Moser, Hermann Steffan, Graz University of Technology; Michael Stadler, Susanne Braeuer, AUDI AG; Volker Hennige, Peter Gollob, AVL LIST GmbH
2013-01-1520
Thermal Analysis of a Lithium-Ion Battery System under Dynamic Electrical Loads Using 3D Finite Element Analysis and Experimental Validation
Kim F. Yeow, AVL Powertrain Engineering Inc.; Ho Teng, AVL Powertrain Engineering Inc
2013-01-1521
Impact of ambient temperature on the A123 Li-ion battery performance and hybrid electric vehicle range
Ehsan Samadani, University of Waterloo; Josh Lo, Michael fowler, Roydon Andrew Fraser, Leonardo Gimenez, University Of Waterloo
2013-01-1522
High performance electrochemical-thermal coupled computer modeling for Li-ion automotive applications
Jim Kalupson, Gang Luo, Christian E. Shaffer, EC Power
2013-01-1523
Connecting Vehicle Requirements with Battery Design and Testing: Linking Drive Cycles with Material Properties
Brian Sisk, Peter Hallac, Qi Zhang, Zhenli Zhang, Johnson Controls Power Solutions
2013-01-1524
Long-Term Validation of Rapid Impedance Spectrum Measurements as a Battery State-of-Health Assessment Technique
Jon P. Christophersen, Idaho National Lab.
2013-01-1525
Performance plus Range: Combined Battery Concept for Plug-In Hybrid Vehicles
Jens Bockstette lng, VKA RWTH-Aachen; Knut Habermann, Juergen Ogrzewalla, FEV GmbH
2013-01-1526
Battery Development for Stop-Start application in Brazilian market
Luiz Gustavo Gusmão soeiro, Luciano Cyrne, Leandro Figueiredo, Fiat Brazil S/A; Christopher LaRochelle, Chrysler Group LLC; Maumi Tsurumaki, Johnson Controls PS do Brasil Ltda
2013-01-1527
Vision of Electric Automotive Machines-The Future is here
Nahum Goldenberg, Nahum Goldenberg, Ltd.
2013-01-1528
Application of Insulation standards to High Voltage Automotive applications
Robert Foley, General Motors; Rajesh Nagappala, Galen Ressler, General Motors LLC; Peter Andres, General Motors, Opel Div; Brian Martel, General Motors LLC
2013-01-1529
A Model Parameter Identification Method for Battery Applications
Xiao Hu, Lewis Collins, Scott Stanton, ANSYS Inc.; Shugang Jiang, A&D Technology Inc
2013-01-1530
Li-Ion Battery SoC Estimation Using a Bayesian Tracker
Ienkaran Arasaratnam, Ryan Ahmed, McMaster University; Jimi Tjong, Ford Motor Co; Saeid Habibi, Mohammed El-Sayed, McMaster Univ
2013-01-1531
Newly Developed Lithium-Ion Battery Cell Technology for a Mass-Market Electric Vehicle
Shinichi Tasaki, Junji Katamura, Norihiko Hirata, Takeshi Miyamoto, Nissan Motor Company, Ltd.; Yuuji Tanjou, Chika AMEMIYA, Hiroshi Miyakubo, Automotive Energy Supply Corporation
2013-01-1532
Lead-Acid State of Charge Estimation for Start-Stop Applications
Daniel Le, Brian Sisk, Johnson Controls Power Solutions
2013-01-1533
The Electric Drive Advanced Battery (EDAB) Project: Development and Utilization of an On-Road Energy Storage System Testbed
Jeffrey Wishart, ECOtality North America; Richard Barney Carlson, Idaho National Laboratory; Paul Chambon, Oak Ridge National Laboratory; Tyler Gray, ECOtality North America
2013-01-1534
Characterizing Thermal Runaway of Lithium-ion Cells in a Battery System using Finite Element Approach
Kim F. Yeow, AVL Powertrain Engineering Inc.; Ho Teng, AVL Powertrain Engineering Inc
2013-01-1535
Pulse Power Testing of Batteries and Supercapacitors for Hybrid Electric Vehicle Applications: A Comparison of Constant Current, Constant Power, and Ramped Power Transients
Dennis A. Corrigan, Xiao Liu, Wayne State University
2013-01-1536
Application of the Smooth Variable Structure Filter to a Reduced-Order Battery Electrochemical Model
Mohammed Farag, S.R. Habibi, McMaster University
2013-01-1537
Improved SOC Estimation for Lithium-Ion Cells valid for different Temperatures and States-of-Health
Patrick Wesskamp, Manuel Fischnaller, Nils Lohmann, Joachim Melbert, Thomas Musch, Ruhr-University of Bochum
2013-01-1538
Lithium-ion battery pack for Stop & Start System
Yamato Utsunomiya, Yuki Nagai, DENSO CORPORATION; Jun Kataoka, Hirobumi Awakawa, SUZUKI MOTOR CORPORATION
2013-01-1539
Modeling and validation of lithium-ion automotive battery packs
SoDuk Lee, Byungho Lee, Joseph McDonald, Edward Nam, US Environmental Protection Agency
2013-01-1540
Extraction of Battery Parameters for Optimal Performance using the Circuit Model with a Multi-Objective Genetic Algorithm
Jonathan Brand, Washington Univ. in St. Louis; Zheming Zhang, Ramesh K. Agarwal, Washington Univ. St. Louis
2013-01-1541
Dakota, a First Principles-based Battery Simulation and Modeling System
Gerald Halpert, Global Aerospace Corporation; Ratnakumar Bugga, Jet Propulsion Laboratory; Matthew Heun, Global Aerospace Corporation; Abhijit Shevade, Jet Propulsion Laboratory; Kerry T. Nock, Global Aerospace Corporation
2013-01-1542
Hardware-in-the-Loop Test of Battery Management Systems
Hagen Haupt, Joerg Bracker, Markus Ploeger, dSPACE GmbH
2013-01-1543
Newly Developed Lithium-Ion Battery Pack Technology for a Mass-Market Electric Vehicle
Yukiko Kinoshita, Yasuharu Watanabe, yasuo yamazaki, Nissan Motor Co., Ltd.
2013-01-1544
Simplified Extended Kalman Filter Model for SOC Estimation of Commercial Power-Oriented LFP Cells
Tarun Huria, Massimo Ceraolo, Universita degli Studi di Pisa; Javier Gazzarri, Robyn Jackey, MathWorks
2013-01-1545
Investigation of the Impact Phenomenon During Minor Collision
Masashi Takahashi, Masaru Takabayashi, Hiroyuki Mitsuishi, Japan Automobile Research Institute
2013-01-1546
Charge Capacity versus Charge Time in CV-CC and Pulse Charging of Li-Ion Batteries
Rami Abousleiman, Chrysler Group LLC; Abdullah Al-Refai, Osamah Rawashdeh, Oakland University
2013-01-1547
Battery Model Parameter Estimation Using a Layered Technique: An Example Using a Lithium Iron Phosphate Cell
Robyn Jackey, Michael Saginaw, Pravesh Sanghvi, Javier Gazzarri, MathWorks; Tarun Huria, Massimo Ceraolo, Universita degli Studi di Pisa
2013-01-1548
Accelerated Aging Test Methodology for Correlation with Life Modeling for Li-ion Batteries in Automotive Applications (Written Only -- No Oral Presentation)
Karl William Steffke, Sudhakar Inguva, Daniel Van Cleve, James Knockeart, General Motors LLC

Planned by Advanced Power Sources Committeee / Powertrain Fuels and Lubricants Activity
Search NEW Books
Access to up-to-date, full-text portfolios of focused, essential, industry knowledge.
Join SAE Today!
Diesel Engine Technology Engineering Academy: June 6-10, Troy, MI, USA • New offering in Europe! July 18-22
Support STEM education programs
©2013 SAE International. All Rights Reserved.