SAE 2013 World Congress & Exhibition

Technical Session Schedule

Wednesday, April 17

Alternative and Advanced Fuels (Part 4)
(Session Code: PFL215)

Room W2-66  1:00 p.m.

This session focuses on the fundamental properties of fuels and methods for measuring these properties, as well as issues related to fuel storage and transportation. Examples include diesel fuel lubricity determination, fuel effects on deposits, cold weather issues, and environmental and toxicological impacts of new fuels

Organizers - William P Attard, MAHLE Powertrain LLC; Barbara Goodrich, John Deere Product Engineering Center; George Karavalakis, University of California, Riverside; James Lyons, Sierra Research Inc.; Elisa Toulson, Michigan State Univ.

Time Paper No. Title
ORAL ONLY
Comprehensive Study of Criteria Emissions from Low Blend Level Biodiesels and their Certification in California
Maryam Hajbabaei, university of california riverside; George Karavalakis, Kent Johnson, Univ of California-Riverside; Alexander Mitchell, Jim Guthrie, California Air Resources Board; Thomas Durbin, Univ of California-Riverside
ORAL ONLY
Developing Direct Injection Systems to Use Ammonia in Spark Ignition Engine
George Zacharakis-Jutz, Song-Charng Kong, Iowa State University
ORAL ONLY
High Temperature Ignition Delay Times of iso-pentanol
Erjiang Hu, Xi'an Jiaotong University; Zuohua Huang, Yingjia ZHANG, Jing Gong, Erjiang Hu, Xian Jiaotong Univ
2013-01-1126
Blend Ratio Optimization of Fuels Containing Gasoline Blendstock, Ethanol, and Higher Alcohols (C3-C6): Part II - Blend Properties and Target Value Sensitivity
Kristina Lawyer, Michigan Technological University; Andrew Ickes, Thomas Wallner, Argonne National Laboratory; David Ertl, Rodney Williamson, Iowa Corn Promotion Board; Scott Miers, Jeffrey Naber, Michigan Technological University
2013-01-1127
Optical investigation of post-injection strategy impact on the fuel vapor within the exhaust line of a light duty diesel engine supplied with biodiesel blends
Simona Silvia Merola, Istituto Motori CNR; Andrea De Filippo, General Motors Powertrain Europe; Gerardo Valentino, Cinzia Tornatore, Luca Marchitto, Stefano Iannuzzi, Istituto Motori CNR
2013-01-1128
Effectiveness of Various Phenolic Compounds (Commercial and Non- Commercial) on Biodiesel Oxidation Stability
Alexandros Deligiannis, Antonios Anastasakos, Fanourios Zannikos, George Anastopoulos, National Technical Univ of Athens
2013-01-1129
Direct Visualization of Combustion in an E85-Fueled DISI Engine under Various Operation Conditions
PO-I Lee, Nick Polcyn, Ming-Chia Lai, Wayne State University
2013-01-1130
Experimental and modeling study of biodiesel surrogates combustion in a CI engine
Xin Wang, Mingfa Yao, Shanju Li, Jingbo Gu, Tianjin Univ
2013-01-1131
Diesel Cold Start into Congested Real World Traffic: Comparison of Diesel, B50, B100 for Gaseous Emissions.
Gordon E. Andrews, Hu Li, University of Leeds, UK; Grzegorz Przybyla, Silesian Univ. of Technology, Poland; Seyed Hadavi, University of Leeds, UK
2013-01-1132
"Performance Evaluation and Emission Studies of a Single Cylinder diesel Engine fuelled with Isopropyl Alcohol and Diesel".
Ashish Kumar Singh, M.Tech (Thermal Engineering); Naveen Kumar, Professor, DTU, Delhi; Chinmaya Mishra, Vipul Vibhanshu, M.Tech (Thermal Engineering)
2013-01-1133
Effects of Fuel Compositions on Diesel Engine Performance Using Ammonia-DME Mixtures
Kyung Hyun Ryu, Kunsan National University; George Zacharakis-Jutz, Song-Charng Kong, Iowa State University
2013-01-1134
Fuel Flushing System to safeguard Engine & Fuel Injection Equipment from the effects of Biodiesel deterioration
Sachin Satdive, FES MAHINDRA AND MAHINDRA; Zaheer Kozhakkaniyil, Mahindra Engineering Services
2013-01-1135
Alternative Diesel Fuel Proposed Combustion Acceptance Criteria for New Fuels in Legacy Diesel Engines
Jim Cowart, Len Hamilton, US Naval Academy; Sherry Williams, Andrew McDaniel, US Navy
2013-01-1136
The Properties and Injector Nozzle Fouling Performance of GTL Diesel and EN590 Blends with RME and SME Biodiesel
Stefan de Goede, Sasol Technology Fuels Technology; Piet Roets, Adrian Velaers, Sasol Fuels Technology; Jerrie Vermeulen, Sasol Technology; Celeste Wilken, Sasol Fuels Technology
2013-01-1137
Influence of different natural gas compositions on the regulated emissions, aldehydes, and particle emissions from a transit bus
George Karavalakis, Nicholas Gysel, Maryam Hajbabaei, Thomas Durbin, Kent Johnson, Wayne Miller, University of California, Riverside
2013-01-1138
Evaluation of the Impacts of Biofuels on Emissions for a California-Certified Diesel Fuel from Heavy-Duty Engines
Maryam Hajbabaei, Kent C. Johnson, University of California, Riverside; Robert Okamoto, California Air Resources Board; Thomas D. Durbin, University of California, Riverside
2013-01-1139
Calculation of Heating Value for Diesel Fuels Containing Biodiesel
Shailesh Martin Lopes, General Motors; Robert Furey, Furey Fuels Consulting, LLC; Pat Geng, GM Powertrain
2013-01-1140
Benefits in adopting Hydrogen-CNG blends as fuel on a transit bus: experimental tests on an engine test bed
Giovanni Pede, Antonino Genovese, Fernando Ortenzi, Carlo Villante, ENEA
2013-01-1141
Investigation of Direct-injected Ethanol and Diesel Fuel Blends on Gaseous and Particulate Emissions in a Medium-duty Diesel Engine.
Tim Nevius, Horiba Automotive Test Systems Corp.; Dario Rauker, Scott Porter, Horiba Instruments Inc
2013-01-1142
Experimental Study of Combustion and Emissions Characteristics of Methyl Oleate, as a Surrogate for Biodiesel, in a Direct injection Diesel Engine
Valentin Soloiu, Jabeous Weaver, Henry Ochieng, Marvin Duggan, Craig Jenkins, Brian Vlcek, Georgia Southern University; Christopher Butts, USDA, ARS National Peanut Research Lab
2013-01-1143
Performance and emissions characteristics of preheated used transformer oil in a direct injection compression ignition engine
Abhishekh Kumar Jha, Pritinika Behera, Murugan Sivalingam, National Institute of Technology Rourkel
2013-01-1144
Blend Ratio Optimization of Fuels Containing Gasoline Blendstock, Ethanol, and Higher Alcohols (C3-C6): Part I – Methodology and Scenario Definition
Kristina Lawyer, Michigan Technological University; Andrew Ickes, Thomas Wallner, Argonne National Laboratory; David Ertl, Rodney Williamson, Iowa Corn Promotion Board; Scott Miers, Jeffrey Naber, Michigan Technological University
2013-01-1145
Diesel Cold Start into Congested Real World Traffic: Comparison of Diesel, B50, B100 for Ozone Forming Potential.
Seyed Hadavi, Univ of Leeds; Gordon E. Andrews, University of Leeds; Grzegorz Przybyla; Hu Li, Univ of Leeds
2013-01-1146
Study on Ignition Delay Times of DME and n-Butane Blends
Erjiang Hu, Zuohua Huang, Xue Jiang, Jiaxiang Zhang, Xi'an Jiaotong University
2013-01-1147
Criteria emissions, particle number emissions, size distributions, and black carbon measurements from PFI gasoline vehicles fueled with different ethanol and butanol blends
George Karavalakis, Univeristy of California, Riverside; Daniel Short, Maryam Hajbabaei, Diep Vu, Mark Villela, Robert Russell, Thomas Durbin, Akua Asa-Awuku, University of California, Riverside
2013-01-1148
Microbiological Growth Study of Biodiesel Fuel
George S. Dodos, Fanourios Zannikos, National Technical Univ of Athens
2013-01-1149
The Impact of Cellulosic Ethanol on the Performance and Emissions of a Circle Track Race Car.
Forrest Jehlik, Argonne National Laboratory; Daniel Bocci, Copia Advance Solutions
2013-01-1150
Performance and emission studies of a diesel engine using biodiesel tire pyrolysis oil blends (Written Only -- No Oral Presentation)
Bijay Dhakal, National Institute of Technology Rourkel; Abhishek Sharma, Murugan Sivalingam, National Institute of Technology Rourke
2013-01-1151
Using Gasoline-liquefied Petroleum Gas Mixture For Lower Emissions And Greater Torque (Written Only -- No Oral Presentation)
Max Beresnev, Alex Beresnev, Southern Federal Univesity, Russia
2013-01-1152
Design of DME-Diesel Fuel Supply System for Non-Gasification (Written Only -- No Oral Presentation)
Jian Dong, Key Lab.of High Performance Ship (WUT); Qingchuan Pan, Zhixiang Pan, Dong Yang, Wuhan University of Technology (WUT)

Planned by Combustion and Fuels Committee / Powertrain Fuels and Lubricants Activity
Join SAE Today!
The Industry's Most Comprehensive, Credible Content Source
Attend an SAE Event
Find out more about SAE Standards
A World In Motion® brings STEM education to life in the classroom
©2013 SAE International. All Rights Reserved.