|
SAE 2013 World Congress & Exhibition
Technical Session Schedule
Thursday, April 18
Exhaust Emission Control: Modeling (Part 2)
(Session Code: PFL407)
Room O3-46 1:00 p.m.
Papers are invited for this session covering diesel engine exhaust aftertreatment system models as well as their validation and application. Technologies covered include DOC, HC Trap, DPF, LNT, SCR, ammonia oxidation catalysts, hybrid or combined catalysts, urea-water solution spray dynamics, and mixture non-uniformity. Modeling aspects range from fundamental, 3D models of individual components to system level simulation, optimization, and control.
Organizers - Maruthi Devarakonda, Pacific Northwest National Laboratory; Thomas McKinley, Cummins Inc.; Vincenzo Mulone, University of Rome Tor Vergata; Achuth Munnannur, Cummins; Balaji Sukumar, Johnson Matthey ECT
| Time |
Paper No. |
Title |
|
2013-01-1571
|
Design Optimization of Emission Probe Using 3D Computational Fluid Dynamics Tool
Xiaogang Zhang, Ford Motor Co.; Paul Tennison, Jianwen Yi, Ford Motor Co; Ruona william, Ford Research Laboratory
|
|
2013-01-1572
|
Three Way Catalyst Modeling with Ammonia and Nitrous Oxide Kinetics for a Lean Burn Direct Injection Spark Ignition (DISI) Gasoline Engine
Jian Gong, Christopher Rutland, University of Wisconsin-Madison
|
|
2013-01-1573
|
Optimal SCR Control with Data-Driven Modeling
Andrew Stevens, Yannan Sun, Jianming Lian, Maruthi Devarakonda, Pacific Northwest National Laboratory; Gordon Parker, Michigan Technological Univ
|
|
2013-01-1574
|
Development of a 1D Catalyzed Diesel Particulate Filter Model for Simulation of the Oxidation of Particulate Matter and Gaseous Species during Passive Oxidation and Active Regeneration
Kiran C. Premchand, Michigan Technological Univ.; John Johnson, Song-Lin Yang, Michigan Technological Univ
|
|
2013-01-1575
|
3D-Semi 1D Coupling for a Complete Simulation of an SCR System
Zainal Abidin, Southwest Research Institute
|
|
2013-01-1576
|
A Modeling Study of SCR Reaction Kinetics from Reactor Experiments
Xiaobo Song, Gordon Parker, John Johnson, Jeffrey Naber, MIchigan Technological University; Josh Pihl, Oak Ridge National Laboratory
|
|
2013-01-1577
|
Numerical and Experimental Investigation of Catalyst Flow and Air/Fuel Control in a Marine Engine
Scott Morton, Ronald Hall, Paul Radavich, Mercury Marine
|
|
2013-01-1578
|
1D Model of a Copper Exchanged Small Pore Zeolite Catalyst Based on Transient SCR Protocol
Maruthi Devarakonda, Jong Lee, George Muntean, Pacific Northwest National Laboratory; Josh Pihl, Stuart Daw, Oak Ridge National Laboratory
|
|
2013-01-1579
|
Validation of Turbulence Models for an Automotive SCR System with Laser Doppler Anemometry Measurements
Markus Zöchbauer, Simon Fischer, Thomas Lauer, Tanja Siegmann-Hegerfeld, Michael Harasek, Vienna University of Technology; Christian Krenn, Guenther Pessl, BMW Motoren GmbH
|
|
2013-01-1580
|
DOC temperature control for low temperature operating ranges with post and main injection actuation
Stephan Stadlbauer; Harald Waschl
|
|
2013-01-1581
|
Development and Validation of DOC and SCR Reduced Order Models for Controls and OBD
Harsha Shankar Surenahalli, Gordon Parker, John Johnson, Michigan Technological Univ
|
|
2013-01-1582
|
A Thermally Efficient DOC Configuration to Improve CO and THC Conversion Efficiency
Isaline Lefort, Athanasios Tsolakis, University of Birmingham
|
|
2013-01-1583
|
Development of a 3-D Model for Analyzing the Effects of Channel Geometry on Filtration Characteristics in Particulate Filter System
Hoon Lee, Kyeong O. Lee, Argonne National Laboratory
|
|
2013-01-1584
|
The Sensitivity of DPF Performance to the Spatial Distribution of Ash inside DPF Inlet Channel
Yujun Wang, MIT; Victor Wong, Alexander Sappok, Sean Munnis, Massachusetts Institute of Technology
|
|
2013-01-1585
|
Comparative drive cycle simulations of light-duty hybrid vehicles with gasoline or diesel engines and emissions controls
Zhiming Gao, C. Stuart Daw, David E. Smith, Oak Ridge National Laboratory
|
|
2013-01-1586
|
The Enhancement of SCR System for Commercial Vehicles
Peter Tai, Yan Shu, Martin Romzek, Eberspaecher North America Inc
|
Planned by Exhaust Aftertreatment and Emissions Committee / Powertrain Fuels and Lubricants Activity
|
