SAE/JSAE 2014 Small Engine Technology Conference & Exhibition

Technical Session Schedule

Wednesday, November 19

Measurement & Simulation (Part 5 of 5)
(Session Code: SETC4)

Room Hall 90B  13:30

The session is associated with engine and vehicle simulation tasks and their related measurements. Simulation and measurement methodology as well as the simulation and measurement application on development tasks will find a place within the session.

Organizers - Giovanni Ferrara, Univ. of Florence; Shigeru Fujii, Yamaha Motor Co., Ltd.; Michihisa Mick Nakagawa, Kawasaki Heavy Industries, Ltd.; Stephan Schmidt, Graz University of Technology

Time Paper No. Title
2014-32-0047
Robust Diagnostic Concept for Vehicle Gearbox with Artificial Pitting Defect in Gear using Vibration Measurements
Mohamed El Morsy, Czech Tech Univ Prague & Helwan Univ.; Gabriela Achtenova, Czech Technical University
2014-32-0048
Development of a 0D Model Starting From Different RANS CFD Tumble Flow Fields in Order to Predict the Turbulence Evolution at Ignition Timing
Stefania Falfari, Claudio Forte, Federico Brusiani, Gian Marco Bianchi, Giulio Cazzoli, Cristian Catellani, University of Bologna
2014-32-0050
Development of Temperature Estimation Method of Whole Engine Considering Heat Balance under Vehicle Running Conditions
Tomokazu Nomura, Koichiro Matsushita, Yoshihiko Fujii, Hirofumi Fujiwara, Honda R&D Co., Ltd.
2014-32-0051
Piston Temperature Measurement in Internal Combustion with Telemetric Method
Akira Ishibashi, Muneaki Nakamura, Hitoshi Muramatsu, Suzuki Motor Corp.
2014-32-0052
Friction Measurement of Al-17%Si Monolithic Cylinder with using Newly Developed Floating Liner Device
Tatsuhiko Sato, Hirotaka Kurita, Yamaha Motor Co., Ltd.; Akemi Ito, Hideyuki Iwasaki, Tokyo City University
2014-32-0053
Study of Effects of Residual Stress on Natural Frequency of Motorcycle Brake Discs
Yoshihiro Nakagawa, Shinya Takahashi, Mikihito Masaki, Ranju Imao, Honda R&D Co., Ltd.
2014-32-0054
Method for Predicting Erosion Due to Cavitations of Outboard-Motor
Toshio Watanabe, Hiroki Sakamoto, Suzuki Motor Corp.
2014-32-0055
Multi-objective optimization of the timing system on a small 2-wheeler engine (SOHC): methodology and case study
Francesco Maiani, Alessio Sisi, Walther Leardini, Piaggio & C SpA
2014-32-0059
Vibro-acoustic modeling and validation of fuel rails
Gabriele Benigni, Universita degli Studi di Pisa; Antonio Agresta, Continental Automotive Italy S.p.A.; Francesca Di Puccio, Universita degli Studi di Pisa; Paola Forte, University of Pisa
2014-32-0060
Improvement of the specific fuel consumption at partial load in SI engines by design strategies based on high compression ratio
Giovanni Vichi, Luca Romani, Giovanni Ferrara, Univ. of Florence; Luca Carmignani, Francesco Maiani, Piaggio & C SpA
2014-32-0061
MEASUREMENT AND VALIDATION OF TWO WHEELED VEHICLE SINGLE CYLINDER ENGINE UNBALANCED FORCE CALCULATION ON THE CRANKSHAFT
Rama Subbu, Baskar Anthony Samy, Piyush Mani Sharma, Prasanna Mahendiran, Hero MotoCorp Limited
2014-32-0062
An Analytical Model of a Two-phase Jet with Application to Fuel Sprays in Internal Combustion Engines
Jonathan Tenenbaum, Michael Shapiro, Leonid Tartakovsky, Technion Israel Inst. of Technology

The papers in this session are available in SAE Technical Paper Collection, COLL-TP-00445 and COLL-TP-00453, and also individually. To purchase visit collections.sae.org