SAE Standards Works
AMS E Carbon and Low Alloy Steels Committee
AMS6408D - Steel, Hotwork Tool, Bars and Forgings, 5.2Cr - 1.5Mo - 1.0V (0.35-0.45C) (H-13), Electroslag Remelted (ESR) or Consumable Electrode Vacuum Arc Remelted (VAR) Annealed
New Project Request
Steel, Hotwork Tool, Bars and Forgings, 5.2Cr - 1.5Mo - 1.0V (0.35-0.45C) (H-13), Electroslag Remelted (ESR) or Consumable Electrode Vacuum Arc Remelted (VAR) Annealed
This specification covers a premium aircraft quality, low alloy steel in the form of bars, forgings, and forging stock. These products have been used typically for hotwork tooling or for parts requiring a steel capable of through hardening to a minimum hardness of 50 HRC in section thicknesses up to 12 inches (305 mm) with relatively high levels of strength, fatigue resistance, ductility, and thermal stability for use in service from 100 to +1000 °F ( 73 to 538 °C) and where such parts may require welding, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment. ARP1110 recommends practices to minimize such conditions.
. All rights reserved.
Intellectual Property Policy
Terms & Conditions