SAE Standards Works
AMS F Corrosion Heat Resistant Alloys Committee
AMS5934 - Steel, Extra High Toughness, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions, 13Cr - 8.0Ni - 2.2Mo - 1.1Al, Vacuum Induction Plus Consumable Electrode Melted, Solution Heat Treated, Precipitation-Hardenable
Steel, Extra High Toughness, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions, 13Cr - 8.0Ni - 2.2Mo - 1.1Al, Vacuum Induction Plus Consumable Electrode Melted, Solution Heat Treated, Precipitation-Hardenable
This specification covers an extra high toughness, corrosion-resistant steel in the form of bars, wire, forgings, flash welded rings, extrusions, and stock for forging, flash welded rings, or extrusion.<p>These products have been used typically for parts requiring extra high toughness, corrosion resistance, stress-corrosion resistance, high strength up to 600 degrees F (316 degrees C), and good ductility and strength in the transverse direction in large section sizes, but usage is not limited to such applications.<p>Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 1110 recommends practices to minimize such conditions.
. All rights reserved.
Intellectual Property Policy
Terms & Conditions