SAE Standards Works
AMS F Corrosion Heat Resistant Alloys Committee
MAM5598C - Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 72ni 15.5cr 0.95(Cb + Ta) 2.5ti 0.70al 7.0fe Consumable Electrode Or Vacuum Induction Melted Solution Heat Treated, Precipitation Hardenable
New Project Request
Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 72ni 15.5cr 0.95(Cb + Ta) 2.5ti 0.70al 7.0fe Consumable Electrode Or Vacuum Induction Melted Solution Heat Treated, Precipitation Hardenable
This specification covers a corrosion and heat resistant nickel alloy in the form of sheet, strip, and plate procured in SI (metric) units.<p>AMS 5598 is the inch/pound version of this MAM.<p.These products have been used typically for parts requiring high strength up to 815 degrees C and oxidation resistance up to 980 degrees C and for bellows and flat springs requiring optimum resistance to relaxation up to 540 degrees C with moderate or relatively low stresses, particularly where welding is involved, but usage is not limited to such applications. Parts may be formed, welded if required, and then heat treated to improve strength at elevated temperatures.
. All rights reserved.
Intellectual Property Policy
Terms & Conditions