SAE Standards Works
SAE Home
Contact Us
|
Help
|
Shopping Cart
User Id:
Password:
Remember Me
E-25 General Standards for Aerospace and Propulsion Systems
Committee
Main
WIP
Documents
Ballots
SAE Members Only
Standards Status Definitions
Display:
All Documents
Suppress Canceled
Document List
Document
Title
Date
Status
AIR1108
Groove Design - Metal Face Seal
Jul 30, 2004
Reaffirmed
AIR1273A
Identification and Coding of Fluid and Electrical Piping System Functions
May 08, 2006
Reaffirmed
AIR13A
FINAL REPORT ON COLD STARTING OF RECIPROCATING AIRCRAFT ENGINES
Oct 01, 1951
Canceled
AIR1471A
Torque Tightening Threaded Fasteners
Oct 19, 2012
Reaffirmed
AIR1551A
Torque Tightening Metric Screw Threaded Fasteners
May 03, 2006
Reaffirmed
AIR1754A
Washer, Thermal Compensating, Metric Series
Oct 19, 2012
Reaffirmed
AIR1758
Limits and Fits - International Metric Tolerance System
Oct 19, 2012
Reaffirmed
AIR18A
Propeller Shaft Ends - Dual Rotation (Engine Supplied Bearing)
Oct 19, 2012
Reaffirmed
AIR26A
No. 70-90, 70L-90, 80-100 and 80L-100 Propeller Shaft Ends Dual Rotation (Propeller Supplied Bearing)
Oct 19, 2012
Reaffirmed
AIR3
Survey of Operating Practices With Propeller Ice Elimination Equipment
Mar 01, 1943
Canceled
AIR3260
Identification of Standard Utility Parts - Bolts and Nuts
Oct 19, 2012
Reaffirmed
AIR3276
Boss - Plug/Pin, Expansion Type Hole Preparation
Oct 19, 2012
Reaffirmed
AIR3277
Installation Procedures - Pin/Plug Expansion Type
Oct 19, 2012
Reaffirmed
AIR39
Water Compatibility of Aircraft Greases
Mar 01, 1955
Canceled
AIR40
Corrosion Preventative Characteristics of Aircraft Greases
Mar 01, 1955
Canceled
AIR41
Stability of Aircraft Greases
Mar 01, 1955
Canceled
AIR42
Contamination Studies of Aircraft Greases
Mar 01, 1955
Canceled
AIR43
Low Temperature Torque Test for Aircraft Greases
Mar 01, 1955
Canceled
AIR44
Load Support Characteristics of Aircraft Greases
Mar 01, 1955
Canceled
AIR4923
Bolts and Screws, Aerospace Engine - Materials, Procurement Specifications and Properties
Oct 11, 2006
Reaffirmed
AIR5926
White Paper to Support Supersession of MIL-S-8879C With AS8879C
Oct 19, 2012
Reaffirmed
AIR6553
Measurement Uncertainty and Consumer Risk
Jan 26, 2010
Issued
AIR809A
Metal Dimensional Change with Temperature
Oct 19, 2012
Reaffirmed
ARP1231A
Gland Design, Elastomeric O-Ring Seals, General Considerations
Oct 19, 2012
Reaffirmed
ARP1232B
Gland Design, Elastomeric O-Ring Seals, Static Radial
Oct 19, 2012
Reaffirmed
ARP1233A
Gland Design, Elastomeric O-Ring Seals, Dynamic Radial, 1500 psi Max
Nov 01, 2012
Reaffirmed
ARP1234B
Gland Design, Elastomeric O-Ring Seals, Static Axial, Without Back-Up Rings
Nov 01, 2012
Reaffirmed
ARP142B
Assembling of Studs in Aluminum and Magnesium
Feb 23, 2004
Revised
ARP1515A
Threaded Fastener Protrusion Through Self-Locking Nuts
Nov 02, 2012
Reaffirmed
ARP166B
Propeller Clearance Envelope
Feb 05, 2013
Stabilized
ARP169A
Numbering of Aircraft Engine Cylinders
May 10, 2006
Reaffirmed
ARP179
Involute Spline Gages (30-- Pressure Angle)
Oct 01, 1997
Canceled
ARP1902A
Bolt, Tee Head, Interface Surface, Dimensions for
Nov 02, 2012
Reaffirmed
ARP237B
Propeller Control Clearance - Single Acting System, Single Rotation Propeller Shaft Reciprocating Engines
Feb 05, 2013
Stabilized
ARP238B
Propeller Control Clearance - Dual Rotation or Double Acting System Single Rotation Propeller Shaft Reciprocating Engines
Feb 05, 2013
Stabilized
ARP244B
Propeller Control Installation Clearance
Feb 05, 2013
Stabilized
ARP246C
Orientation of Engine Axis, Coordinate and Numbering Systems for Aircraft Gas Turbine Engines
Nov 02, 2012
Reaffirmed
ARP260D
Control Lever Connections (60° V Serrations)
Nov 02, 2012
Reaffirmed
ARP277B
Propeller Attachment - Nose Mounted
Feb 05, 2013
Stabilized
ARP2B
Horsepower Correction Formulae
Nov 02, 2012
Reaffirmed
ARP355A
Terminology of Dual and Coaxial Counter-Rotating Propellers
Feb 23, 2004
Revised
ARP365B
Drives - Square Flange .600 PD Spline Accessory
Feb 05, 2013
Stabilized
ARP373B
Propeller Shaft Torque Ratings
Nov 02, 2012
Reaffirmed
ARP375D
Propeller Shaft Ends, Dual Rotation (Propeller Supplied Bearing)
Feb 05, 2013
Stabilized
ARP381B
Hub, Flanged - Spline Type Wood Propeller - #10, #20
Feb 05, 2013
Stabilized
ARP4848
Flaring (Swaging) and Removal of Shank Nuts
Nov 02, 2012
Reaffirmed
ARP502
Propeller Shaft Ends - Flanged Small Aircraft Engine
Oct 23, 2012
Reaffirmed
ARP510A
Moment Weight of Turbine and Compressor Rotor Blades
Oct 23, 2012
Reaffirmed
ARP573D
Silver, Copper and Nickel Alloy Brazed Joints for Aerospace Propulsion Systems
Oct 23, 2012
Reaffirmed
ARP671B
Bearing, Ball Annular
Feb 05, 2013
Stabilized
ARP674C
Groove Design, Metal O-Ring Gasket
Oct 23, 2012
Reaffirmed
ARP676
Lever Ends (Involute Serrations)
Oct 23, 2012
Reaffirmed
ARP688A
Reusable Lock for Spanner Nuts
Oct 23, 2012
Reaffirmed
ARP700B
High Strength Elevated Temperature Bolting Practice
Oct 23, 2012
Reaffirmed
ARP748A
Gas Turbine Engine Power Take-Off Pad Requirements
Feb 23, 2004
Revised
ARP843A
Chip Detector, Electrical Connection, Remote Indicating
Nov 01, 2012
Reaffirmed
ARP953B
Stress Dome in Fasteners
Nov 01, 2012
Reaffirmed
AS100001D
Gasket - Type X or XV Engine Accessory Drive
Jan 03, 2013
Stabilized
AS100002D
Gasket - Type XI Engine Accessory Drive
Jan 03, 2013
Stabilized
AS100003D
Gasket - Type XII, XIV-A and XIV-B Engine Accessory Drive
Jan 03, 2013
Stabilized
AS100004D
Gasket - Type XIII Engine Accessory Drive
Jan 03, 2013
Stabilized
AS100005D
Gasket - Type XIV-C Engine Accessory Drive
Jan 03, 2013
Stabilized
AS100006D
Gasket - Type XVI Engine Accessory Drive
Jan 03, 2013
Stabilized
AS100007C
Gasket - Type XIX Engine Accessory Drive
Nov 01, 2012
Reaffirmed
AS100016
Lockwire, Brass
Jun 26, 2007
Reaffirmed
AS100026A
Safety Wire - Cres AMS 5685
Nov 01, 2012
Reaffirmed
AS1050A
DESIGN STANDARD, NUT, SELF-LOCKING, ACCESSORY MOUNTING
Feb 10, 2013
Revised
AS1078
Fitting End - Flared Tube Connection, Extended Thread
May 05, 2006
Reaffirmed
AS107E
Surface Finish (RMS)
Jan 04, 2013
Stabilized
AS1105B
Service Time Coding of Propulsion Engine Items
Jan 04, 2013
Stabilized
AS1132H
Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
Oct 17, 2008
Revised
AS115401A
Screw - Flate Fillister Head, Cadmium Plated, Steel UNS G87400, 125 ksi min. .1900-32 UNF-3A
Dec 22, 2008
Revised
AS115451B
Screw - Flate Fillister Head, Cadmium Plated, Steel UNS G87400, 125 ksi min. .2500-28UNF-3A
Apr 08, 2009
Revised
AS115501A
Screw - Flate Fillister Head, Cadmium Plated, Steel UNS G87400, 125 ksi min. .3125-24 UNF-3A
Dec 22, 2008
Revised
AS115601A
Screw - Flat Fillister Head, Drilled Shank, Cadmium Plated, Steel UNS G87400, 125 KSI Min. .1900-32UNF-3A
Feb 25, 2009
Revised
AS115651A
Screw - Flat Fillister Head, Drilled Shank, Cadmium Plated, Steel UNS G87400, 125 KSI Min. .2500-28UNF-3A
Feb 26, 2009
Revised
AS115801B
Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min, .1900-32 UNF-3A
Jun 19, 2006
Revised
AS115851A
Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .2500-20 UNC - 3A
Sep 07, 2006
Revised
AS115901B
Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .2500-28 UNF - 3A
Jul 09, 2009
Revised
AS115951B
Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .3125-18 UNC - 3A
Jul 13, 2009
Revised
AS1159B
Wrenching Configuration, 12 Lobed, For Threaded Fasteners
Oct 10, 2006
Reaffirmed
AS116001A
Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .3125-24 UNF-3A
Nov 02, 2006
Revised
AS116051A
Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .3750-16 UNC-3A
Nov 02, 2006
Revised
AS116101A
Screw - Flat Fillister, Drilled Head, Cadmium Plated, Steel UNS G87400, 125 ksi min .3750-24 UNF-3A
Nov 02, 2006
Revised
AS116901B
Screw - Oval Fillister Head, .112-40
Feb 23, 2012
Stabilized
AS116913B
Screw - Oval Fillister, Drilled Head, Cadmium Plated, Steel UNS K00802, .1120-40 UNC - 2A
Oct 03, 2012
Revised
AS116925B
Screw - Oval Fillister Head, .138-32
Feb 01, 2012
Stabilized
AS116961C
Screw - Oval Fillister Drilled Head, .138-32
Feb 01, 2012
Stabilized
AS117001B
Screw - Oval Fillister Head, .164-32
Feb 01, 2012
Stabilized
AS117041B
Screw - Oval Fillister Drilled Head, .164-32
Feb 03, 2012
Stabilized
AS1171A
Boss - Fluid Connection, Internal Straight Thread, Shallow Tap
Nov 01, 2012
Reaffirmed
AS1177A
Nondestructive Inspection Standards for Bolts and Screws
Nov 01, 2012
Reaffirmed
AS121501A
Nut, Plain - Hexagon, Steel UNS G87400, Cadmium Plated, 125 ksi min
Apr 15, 2005
Revised
AS121601A
Pin, Straight, Headed, Cadmium Plated, UNS G87400, .125 Nom
Oct 20, 2008
Revised
AS121651A
Pin, Straight, Headed, Cadmium Plated, UNS G87400, .187 Nom
Oct 20, 2008
Revised
AS121701A
Pin, Straight, Headed, Cadmium Plated, UNS G87400, .250 Nom
Oct 20, 2008
Revised
AS121751A
Pin, Straight, Headed, Cadmium Plated, UNS G87400, .312 Nom
Oct 20, 2008
Revised
AS121801A
Pin, Straight, Headed, Cadmium Plated, UNS G87400, .375 Nom
Oct 20, 2008
Revised
AS121851A
Pin, Straight, Headed, Cadmium Plated, UNS G87400, .500 Nom
Oct 20, 2008
Revised
AS122026A
Washer - Lock, Spring, Cadmium Plated
May 29, 2007
Revised
AS122676B
Pin, Straight, Headless, Steel, UNS G10950
Nov 01, 2012
Reaffirmed
AS1229C
Insert, Screw Thread, Helical Coil, Stud Locking, Performance Standard For
Nov 01, 2012
Reaffirmed
AS123020
Gasket - Aluminum - Non Asbestos, Annular
Jun 26, 2007
Reaffirmed
AS123151A
Rivet, Universal Head, High Temperature, 347 Cres UNS S34700
Nov 01, 2012
Reaffirmed
AS123301B
RIVET, SOLID, UNIVERSAL HEAD, NICKEL ALLOY, UNS N06600
Apr 20, 2013
Revised
AS123451B
Rivet, Solid, 100° Flush Head, High Temperature, 347 Cres, UNS S34700
Nov 01, 2012
Reaffirmed
AS123601B
Rivet, Solid, 100° Flush Head, Nickel Alloy UNS N06600
Nov 01, 2012
Reaffirmed
AS123751B
Pin, Cotter-Cres, UNS S30200, AS7210
Jun 29, 2004
Revised
AS124951
Rive - 100Md Countersunk Head, Corrosion Resistant Steel
Nov 01, 2012
Reaffirmed
AS125101C
Rivet - 100° Countersunk Head, Mild Steel
Feb 23, 2012
Stabilized
AS125251B
Rivet - 100 Degree Countersunk Head, Aluminum Alloy (UNS A92117)
Mar 10, 2012
Revised
AS125401
Rivet - Universal Head, Corrosion Resistant Steel
Nov 01, 2012
Reaffirmed
AS125551B
Rivet - Universal Head, Mild Steel
Feb 23, 2012
Stabilized
AS125701B
Rivet - Universal Head, Aluminum Alloy (UNS A92117)
Mar 13, 2012
Revised
AS125851B
Plug - Pipe, Cadmium Plated, Steel UNS G87400, Countersunk Hex
May 29, 2007
Revised
AS126275B
Stud - Straight, Cadmium Plated, Steel, UNS G87400, 125 ksi min, .3125 - 18 NS X .3125 - 24 UNF-3A
Oct 25, 2005
Revised
AS126587A
Stud - Straight, Cadmium Plated, Steel, UNS G87400, 125 ksi min, .3750 - 16 NS x .3750 - 24 UNF-3A
Jun 27, 2007
Reaffirmed
AS126881
Stud - Straight, Necked, .375-16 X .375-24
Nov 01, 2012
Reaffirmed
AS127193
Stud - Straight, Necked, .4375-14 X .4375-20
Nov 01, 2012
Reaffirmed
AS127D
Propeller Shaft End, Flanged Type - No. 1, 2, 3, 4, 5, & 6
Nov 01, 2012
Reaffirmed
AS128363
Stud - Straight, Drilled, .250-20 x .250-28
Jun 26, 2007
Reaffirmed
AS128687
Stud - Straight, Drilled, .3125-18 x .3125-24
Jun 26, 2007
Reaffirmed
AS129293
Stud- Straight, Drilled, .3125-18 X .3125-24
Nov 01, 2012
Reaffirmed
AS1310B
Fastener Torque for Threaded Applications, Definitions Of
Nov 01, 2012
Reaffirmed
AS131A
Pads, Oil Inlet and Outlet, Types I, II & III - For Airplane Connections, Aircraft Engines
May 31, 2006
Reaffirmed
AS132
Pin - Taper
Dec 16, 2002
Canceled
AS1325
Wrench Configuration, 12 Lobed Drive
Nov 01, 2012
Reaffirmed
AS1337A
Selected Aerospace Diameter Pitch Combinations of Metric 60° Screw Threads for Nuts and Bolts
Nov 01, 2012
Reaffirmed
AS1338
Aerospace Metric 60° Screw Thread Profile and Tolerance Classes
May 05, 2006
Reaffirmed
AS134
Bolt Heads, Hexagon - Large Fillet Aircraft Engine
Dec 16, 2002
Canceled
AS1349A
Insert, Screw Thread, Helical Coil, Locking (Low Friction Systems), Performance Standard For
Nov 01, 2012
Reaffirmed
AS135
Screw Heads, Flat Fillister - Large Fillet Aircraft Engine
Dec 16, 2002
Canceled
AS13572
Springs, Helical, Compression and Extension
May 11, 2006
Reaffirmed
AS1371
Nuts, Self-Locking Corrosion, Resistant Steel, High Strength, Prevailing Torque, All Metal, 800 Degrees F (427 Degrees C) Use, Unj Thread Form
Jul 23, 2004
Reaffirmed
AS13A
Magnetos, Aircraft, Drives for
Feb 05, 2013
Stabilized
AS1414
Propeller Shaft End - Flanged, 5.125 (130.175) Bolt Circle
Nov 01, 2012
Reaffirmed
AS1421A
Aerospace Selected Diameter - Pitch Combinations of Metric 60° Screw Threads for Shaft or Bearing Retaining Screw Threads
Nov 16, 2010
Canceled
AS14244
Clamp, Loop Type, Bonding, Metric
Nov 01, 2012
Reaffirmed
AS14274
Pin, Quick Release, Positive Locking, "L" Handle, Single Action, Detent Wrench/Safety Pin (Slotted)
Nov 01, 2012
Reaffirmed
AS1495A
Shaft Nut and Keywasher Installation Dimensions For
Nov 01, 2012
Reaffirmed
AS150171B
Gasket - Copper, Cadmium Plated, Tube Connection
May 29, 2007
Revised
AS150201
Pin - Lock, Steel
May 04, 2005
Reaffirmed
AS150301
Pin-Lock, Brass
Jun 26, 2007
Reaffirmed
AS150401A
Nut-Hex, Check UNS G87400
Feb 03, 2011
Revised
AS150426D
Nut - Hex, Check, AMS6320, AMS632 or AMS6325
Jan 11, 2012
Stabilized
AS150501B
Stud, Stepped, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .2500-20 UNS X .1900-32 UNF-3A
Apr 11, 2012
Revised
AS1508
Undercuts for Straight Screw Threads - Metric
Nov 01, 2012
Reaffirmed
AS150801B
Stud, Stepped, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .3125-18 UNS X .2500-28 UNF-3A
Apr 11, 2012
Revised
AS151401A
Stud, Stepped, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .4375-14 UNS X .3750-24 UNF-3A
May 18, 2006
Revised
AS151701A
Stud, Stepped, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .5000-13 UNS X .4375-20 UNF-3A
May 18, 2006
Revised
AS1520
Areas For Calculating Stress Or Load Values For Metric Mjexternally Threaded Fasteners
Jul 23, 2002
Canceled
AS152601A
Stud, Stepped, Drilled 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .2500-20 UNS X .1900-32 UNF-3A
May 04, 2006
Revised
AS152901A
Stud, Stepped, Drilled 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .3125-18 UNS X .2500-28 UNF-3A
May 04, 2006
Revised
AS153201A
Stud, Stepped, Drilled, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .3750-16 UNS X .3125-24 UNF-3A
Mar 09, 2010
Revised
AS154701
Stud, Stepped, 2 Dia Engagement .250-20 X .190-32
Nov 01, 2012
Reaffirmed
AS155001A
Stud, Stepped, 2 Dia Engagement, Cadmium Plated, Steel UNS G87400, .3125-18 UNS X .2500-28 UNF-3A
Feb 07, 2007
Revised
AS155301A
Stud, Stepped, 2 Dia Engagement, Cadmium Plated, Steel UNS G87400, .3750-16 UNS X .3125-24 UNF-3A
Feb 07, 2007
Revised
AS1553A
Performance Standard for Tube Support Loop-Cushioned Clamp
Nov 01, 2012
Reaffirmed
AS155901A
Stud, Stepped, 2 Dia Engagement, Cadmium Plated, Steel UNS G87400, .5000-13 UNS X .4375-20 UNF-3A
Feb 07, 2007
Revised
AS1560A
Modules and Basic Racks of Metric Spur and Helical Gears
Nov 01, 2012
Reaffirmed
AS1561
Stud, Locked In - Ring, Straight, Installation and Removal Of
May 03, 2006
Reaffirmed
AS158901A
Stud, Stepped, Necked, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .4375-14 UNS X .3750-24 UNF-3A
Feb 07, 2007
Revised
AS1620
Stud, Locked In - Ring, Straight, Hole Preparation For
Nov 01, 2012
Reaffirmed
AS162501A
Stud, Stepped, Drilled, Necked, 2 Dia Engagement, Cadmium Plated, Steel UNS G87400, .4375-14 UNS X .3750-24 UNF-3A
Feb 07, 2007
Revised
AS167A
Chart - Humidity Indicator, Color Comparison
Nov 01, 2012
Reaffirmed
AS16842A
Clamp, Wire, Rope, Saddled, Single Grip, Steel
Aug 18, 2005
Canceled
AS1701C
Lubricant, Solid Film
Nov 01, 2012
Reaffirmed
AS17184B
Screw, Externally Relieved Body, Cres - (Synchro)
May 05, 2009
Revised
AS172201
Washer, Key-Single, Bearing Retaining, Ams 8350 (Asg)
Nov 01, 2012
Reaffirmed
AS172236C
Nut, Spanner, Bearing Retaining, Aeronautical, UNS G41400
Aug 23, 2010
Revised
AS172271
Washer, Key-Single, Ams 6350 (Asg)
Nov 01, 2012
Reaffirmed
AS172321A
Nut, Spanner, Aeronautical, UNS G41400
Nov 01, 2012
Reaffirmed
AS176C
Limits, Table of Limits and Lubrication Charts
Nov 01, 2012
Reaffirmed
AS177B
Operating Instructions for Aircraft Engines (Preparation of)
Nov 01, 2012
Reaffirmed
AS178
Two-Speed Propeller Reduction Gear Control
Jan 01, 1988
Canceled
AS180A
Propeller Hub - Single Rotation
Nov 01, 2012
Reaffirmed
AS194A
Nomenclature - Engine Cooling Fan
May 11, 2006
Reaffirmed
AS1958
Port - Fluid Connection, Ring Locked Insert, Standards Dimensions For
Nov 01, 2012
Reaffirmed
AS1959
Insert - Ring Locked, Fluid Connection Port Design, Installation and Removal Of
Nov 01, 2012
Reaffirmed
AS1B
Altitude Graphs, Aircraft Reciprocating Engine Performance
Nov 01, 2012
Reaffirmed
AS20005
Drive - Type Xv Engine Accessory - Design Standard For
Nov 01, 2012
Reaffirmed
AS20010
Drive - Type Xx Engine Accessory - Design Standard For
Nov 01, 2012
Reaffirmed
AS20253
Pin, Hinge
Nov 01, 2012
Reaffirmed
AS20C
Definitions, Aircraft Reciprocating Engine Performance
Nov 01, 2012
Reaffirmed
AS221B
Gasket - Two-Bolt Exhaust Flange
Mar 12, 2013
Stabilized
AS222B
Flange - Two-Bolt Exhaust
Mar 12, 2013
Stabilized
AS223B
Flange Installation - Two-Bolt Exhaust
Mar 12, 2013
Stabilized
AS24585B
Spring, Helical, Compression: For Loads Below 20 Pounds
Jun 27, 2007
Reaffirmed
AS24586A
Spring, Helical, Extension: For Loads Below 30 Pounds
Dec 14, 2010
Revised
AS25109
Engines, Aircraft, Reciprocating, General Specification For
Nov 01, 2012
Reaffirmed
AS25281A
Clamp, Loop, Plastic, Wire Support
Jan 21, 2005
Revised
AS269H
Identification of Material for AN, MS, and AS Engine and Propeller Standard Utility Parts and Also for Company Parts
Nov 01, 2012
Reaffirmed
AS291E
Surface Texture, Roughness, Waviness and Lay
May 04, 2006
Reaffirmed
AS3040A
Installation - Multiple Tube Detachable Cushion Clamp
Nov 01, 2012
Reaffirmed
AS3062C
Bolts, Screws and Studs - Screw Thread Requirements
Nov 01, 2012
Reaffirmed
AS3063B
Bolts, Screws and Studs, Geometric Control Requirements
Nov 01, 2012
Reaffirmed
AS3066B
Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251
Jan 04, 2013
Stabilized
AS3067B
Nut, Self-Locking, Double Hexagon, Reduced Envelope, As7251
Nov 01, 2012
Reaffirmed
AS3068A
Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251
Nov 01, 2012
Reaffirmed
AS3069
Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251
Nov 01, 2012
Reaffirmed
AS307
Cover, Flight - Governor Mounting Pad
Nov 01, 2012
Reaffirmed
AS3070
Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251
Nov 01, 2012
Reaffirmed
AS3071B
Acceptance Criteria - Magnetic Particle, Fluorescent Penetrant, and Contrast Dye Penetrant Inspection
Nov 01, 2012
Reaffirmed
AS3072B
Gasket - 37° Flared Tube Fitting, Copper, AMS 4500
Jun 27, 2007
Reaffirmed
AS3073C
Gasket - 37° Flared Tube Fitting, Copper, AMS 4500
Jun 27, 2007
Reaffirmed
AS3074C
Gasket - 37° Flared Tube Fitting, Nickel, AMS 5553
Feb 07, 2007
Revised
AS3075D
Gasket - 37° Flared Tube Fitting, Nickel, AMS 5553
Feb 07, 2007
Revised
AS3076
Ring - Back-Up, Boss Connection, Polytetrafluoroethylene
Nov 01, 2012
Reaffirmed
AS3080
Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 1.5 Dia Nom Length
Nov 01, 2012
Reaffirmed
AS3081
Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 2 Dia. Nom. Length
Nov 01, 2012
Reaffirmed
AS3082
Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 2.5 Dia. Nom. Length
Nov 01, 2012
Reaffirmed
AS3083
Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 3 Dia. Nom. Length
Nov 01, 2012
Reaffirmed
AS3084A
Packing, Preformed - AMS7280 - Seal
Jun 06, 2012
Stabilized
AS3085A
Packing, Preformed - AMS7280 - 'O' Ring
Jun 06, 2012
Stabilized
AS3086A
Stud - Straight, Key Locked, Cadmium Plated, Steel, .1900-32 UNJF-3A X .1900-32 UNJF-3A
May 29, 2007
Revised
AS3087A
Stud - Straight, Key Locked, Cadmium Plated, Steel, .250-28 UNJF-3A X .250-28 UNJF-3A
May 29, 2007
Revised
AS3088A
Stud, Straight, Key Locked, Cadmium Plated, Steel, .3125-24 UNJF-3A X .3125-24 UNJF-3A
May 29, 2007
Revised
AS3089A
Stud, Straight, Key Locked, Cadmium Plated, Steel, .3750-24 UNJF-3A X .3750-24 UNJF-3A
May 29, 2007
Revised
AS3090
Stud - Straight, Key Locked, Cres AMS 5731, .190-32 UNJF X .190-32 UNJF
Nov 01, 2012
Reaffirmed
AS3091
Stud - Straight, Key Locked, Cres AMS 5731, .250-28 UNJF X .250-28 UNJF
Nov 01, 2012
Reaffirmed
AS3092
Stud - Straight, Key Locked, Cres AMS 5731, .3125-24 UNJF X .3125-24 UNJF
Nov 01, 2012
Reaffirmed
AS3093
Stud - Straight, Key Locked, Cres AMS 5731, .375-24 UNJF X .375-24 UNJF
Nov 01, 2012
Reaffirmed
AS3094
Insert - Cres Helical Coil Fine Thread, Locking (Low Friction Systems) 1.5 Dia. Nom. Length
Nov 01, 2012
Reaffirmed
AS3095
Insert - Cres Helical Coil Fine Thread, Locking (Low Friction Systems) 2 Dia Nom Length
Nov 01, 2012
Reaffirmed
AS3096
Insert - Cres Helical Coil Fine Thread, Locking (Low Friction Systems) 2.5 Dia Nom Length
Nov 01, 2012
Reaffirmed
AS3097
Insert - Cres Helical Coil Fine Thread, Locking (Low Friction Systems) 3 Dia Nom Length
Nov 01, 2012
Reaffirmed
AS3098
Screw, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .164-36 UNJF-3A
Nov 01, 2012
Reaffirmed
AS3099
Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .190-32 UNJF-3A
Nov 01, 2012
Reaffirmed
AS3100
Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .250-28 UNJF-3A
Nov 01, 2012
Reaffirmed
AS3101
Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .3125-24 UNJF-3A
Nov 01, 2012
Reaffirmed
AS3102
Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .375-24 UNJF-3A
Nov 01, 2012
Reaffirmed
AS3103
Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .4375-20 UNJF-3A
Nov 01, 2012
Reaffirmed
AS3104
Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .500-20 UNJF-3A
May 02, 2006
Reaffirmed
AS3105
Bolt, Machine - Hexagon Head, Pd Shank, Cres Ams 5731, .5625-18 Unjf-3a
Nov 01, 2012
Reaffirmed
AS3106
Screw, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres Ams 5731, .164-36 Unjf-3a
Jul 30, 2004
Reaffirmed
AS3107
Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres Ams 5731, .190-32 Unjf-3a
Nov 01, 2012
Reaffirmed
AS3108
Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres Ams 5731, .250-28 Unjf-3a
Nov 01, 2012
Reaffirmed
AS3109
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Cres AMS 5731, .3125-24 UNJF-3A
Nov 01, 2012
Reaffirmed
AS3110
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Cres AMS 5731, .375-24 UNJF-3A
Nov 01, 2012
Reaffirmed
AS3111
Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres Ams 5731, .4375-20 Unjf-3a
Nov 01, 2012
Reaffirmed
AS3112
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Cres AMS 5731, .500-20 UNJF-3A
May 03, 2006
Reaffirmed
AS3113
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Cres AMS 5731, .5625-18 UNJF-3A
Nov 01, 2012
Reaffirmed
AS3114
Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .190-32 Unjf-3a
Nov 01, 2012
Reaffirmed
AS3115
Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, Cres AMS 5731, .250-28 UNJF-3A
Nov 01, 2012
Reaffirmed
AS3116
Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, Cres AMS 5731, .3125-24 UNJF-3A
May 11, 2006
Reaffirmed
AS3117
Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .375-24 Unjf-3a
Feb 23, 2004
Reaffirmed
AS3118
Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .4375-20 Unjf-3a
Feb 23, 2004
Reaffirmed
AS3119
Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .500-20 Unjf-3a
Feb 23, 2004
Reaffirmed
AS3120
Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .5625-18 Unjf-3a
Feb 23, 2004
Reaffirmed
AS3121A
Plug, Expansion - Aluminum, 2024-T4 and 2024-T351, Long; Std and .010 Oversize Diameters (UNS A92024)
Sep 03, 2008
Revised
AS3122A
Pin, Expansion - Aluminum, 2024-T4 and 2024-T351, Long (UNS A92024)
Sep 03, 2008
Revised
AS3123A
Plug, Expansion - Aluminum, 2024-T4, and 2024-T351, Short; Std and .010 Oversize Diameters, UNS A92024
Feb 10, 2009
Revised
AS3124A
Pin, Expansion - Aluminum, 2024-T4 and 2024-T351, Short, UNS A92024
Feb 10, 2009
Revised
AS3125A
Plug, Expansion - Cres, 416 or 416SE, Long; Std and .010 Oversize Diameters, UNS S41600/UNS S41623
Feb 05, 2009
Revised
AS3126A
Pin, Expansion - Cres, 416 or 416SE, Long, UNS S41600/UNS S41623
Feb 05, 2009
Revised
AS3127A
Plug, Expansion - Cres, 416 or 416SE, Short; Std and .010 Oversize Diameters, UNS S41600/UNS S41623
Feb 05, 2009
Revised
AS3128A
Pin, Expansion - Cres, 416 or 416SE, Short, UNS S41600/UNS S41623
Feb 05, 2009
Revised
AS3129A
Plug, Expansion - Cres, 303, Long; Std and .010 Oversize Diameters, UNS S30300
Feb 05, 2009
Revised
AS3130A
Pin, Expansion - Cres, 303, Long, UNS S30300
Feb 05, 2009
Revised
AS3131A
Plug, Expansion - Cres, 303, Short; Std and .010 Oversize Diameters, UNS S30300
Feb 05, 2009
Revised
AS3132A
Pin, Expansion - Cres, 303, Short, UNS S30300
Feb 04, 2009
Revised
AS3139A
Stud Stepped - 2.5 Dia. Engagement, Pd Shank, Ams 5731, .5625-18 Unjf-3a X .500-20 Unjf-3a
Jul 23, 2004
Reaffirmed
AS3140A
Stud Stepped - 2.5 Dia. Engagement, Pd Shank, Ams 5731, .3125-24 Unjf-3a X .250-28 Unjf-3a
Jul 23, 2004
Reaffirmed
AS3141A
Stud Stepped - 2.5 Dia. Engagement, Pd Shank, Ams 5731, .375-24 Unjf-3a X .3125-24 Unjf-3a
Jul 23, 2004
Reaffirmed
AS3142A
Stud Stepped - 2.5 Dia. Engagement, Pd Shank, Ams 5731, .4375-20 Unjf-3a X .375-24 Unjf-3a
Jul 23, 2004
Reaffirmed
AS3143A
Stud Stepped - 2.5 Dia. Engagement, Pd Shank, Ams 5731, .500-20 Unjf-3a X .4375-20 Unjf-3a
Jul 23, 2004
Reaffirmed
AS3144
Stud, Stepped - 2.5 Dia Engagement, PD Shank, AMS 5731, .5625-18 UNJF-3A X .500-20 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3147
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .190-32 UNJF-3A
May 03, 2006
Reaffirmed
AS3148
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .250-28 UNJF-3A
May 03, 2006
Reaffirmed
AS3149
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .3125-24 UNJF-3A
May 03, 2006
Reaffirmed
AS3150
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .375-24 UNJF-3A
May 03, 2006
Reaffirmed
AS3151
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .4375-20 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3152
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Ams 4967, .500-20 Unjf-3a
Jul 23, 2004
Reaffirmed
AS3153
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .5625-18 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3156
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .190-32 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3157
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .250-28 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3158
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .3125-24 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3159A
Bolt, Machine-Double Hexagon Extended Washer Hd, Drilled, Close Tolerance Shank, TI Alloy, UNS R56400, 160 ksi Min .3750-24, UNJF-3A
Nov 01, 2012
Reaffirmed
AS3160
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .4375-20 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3161
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .500-20 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3162
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .5625-18 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3163
Nut, Plain - O.D. Slots, Key Washer Locked, AMS 6322, MIL-S-8879
May 05, 2006
Reaffirmed
AS3167
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .190-32 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3168
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .250-28 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3169
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .3125-24 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3170
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .375-24 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3171
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .4375-20 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3172
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .500-20 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3173
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .5625-18 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3174
Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .190-32 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3175
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .250-28 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3176
Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .3125-24 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3177
Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .375-24 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3178
Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .4375-20 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3179
Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .500-20 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3180
Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .5625-18 UNJF-3A
May 02, 2006
Reaffirmed
AS3208
Packing, Preformed - Ams 7276 - Seal
Jul 30, 2004
Reaffirmed
AS3209
Packing, Preformed - Ams 7276 O-Ring
Jul 30, 2004
Reaffirmed
AS3214
Wire, Safety-Steel, Corrosion and Heat Resistant, AMS 5689
Oct 10, 2006
Reaffirmed
AS3215A
Ring, Retaining-Spiral, Internal, Heavy Duty, Cres
Nov 01, 2012
Reaffirmed
AS3216A
Ring, Retaining-Spiral, External, Heavy Duty, Cres
Nov 01, 2012
Reaffirmed
AS3217A
Ring, Retaining-Spiral, Internal, Light Duty, Cres
Nov 01, 2012
Reaffirmed
AS3218A
Ring, Retaining-Spiral, External, Light Duty, Cres
Nov 01, 2012
Reaffirmed
AS3219A
Ring, Retaining, Spiral, Minimum Distortion, Dimensional and Acceptance Standard For
Nov 01, 2012
Reaffirmed
AS3221B
Cover - Engine Accessory Drive, Square, 2.653 Bolt Circle, AMS4490 (UNS M11910)
Oct 03, 2012
Revised
AS3222C
Cover - Engine Accessory Drive, Square, 5.000 Bolt Circle, AMS4490 (UNS M11910)
Oct 03, 2012
Revised
AS3223B
Cover - Engine Accessory Drive, Round, 5.000 Bolt Circle, AMS4490 (UNS M11910)
Oct 03, 2012
Revised
AS3224B
Cover - Engine Accessory Drive, Round, 8.000 Bolt Circle, AMS4490 (UNS M11910)
Oct 03, 2012
Revised
AS3225C
Cover - Engine Accessory Drive, Round, 10.000 Bolt Circle, AMS4490 (UNS M11910)
Oct 03, 2012
Revised
AS3226
Tube Tee, Boss - Ams 5646
Nov 29, 2001
Reaffirmed
AS3228A
Rivet - Tubular, Countersunk, AS7228
Nov 01, 2012
Reaffirmed
AS3229A
Rivet - Tubular, Universal, AS7228
Nov 01, 2012
Reaffirmed
AS3230A
Rivet - Tubular, Countersunk, AS7232
Nov 01, 2012
Reaffirmed
AS3231A
Rivet - Tubular, Universal, AS7232
Nov 01, 2012
Reaffirmed
AS3232B
BOLT, TEE HEAD – CHAMFERED AMS5708 (UNS N07001), 165 KSI MIN UTS .1900-32-UNJF-3A
Mar 28, 2013
Revised
AS3233A
BOLT, TEE HEAD - CHAMFERED, PD SHANK, NICKEL ALLOY, 165 KSI MIN UTS .2500-28 UNJF-3A
Mar 28, 2013
Revised
AS3234A
BOLT, TEE HEAD - CHAMFERED, PD SHANK NICKEL ALLOY (UNS N07001), 165 KSI MIN UTS .3125-24 UNJF-3A
Mar 28, 2013
Revised
AS3235C
BOLT, TEE HEAD – CHAMFERED, PD SHANK NICKEL ALLOY (UNS N07001),165 KSI MIN UTS .3750-24 UNJF-3A
Mar 28, 2013
Revised
AS3236C
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .1900-32 UNJF-3A
Dec 20, 2011
Revised
AS3237C
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .2500-28 UNJF-3A
Dec 16, 2011
Revised
AS3238C
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .3125-24 UNJF-3A
Dec 20, 2011
Revised
AS3239C
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .3750-24 UNJF-3A
Dec 20, 2011
Revised
AS3240C
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .4375-20 UNJF-3A
Dec 20, 2011
Revised
AS3241C
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .5000-20 UNJF-3A
Apr 11, 2012
Revised
AS3242C
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .5625-18 UNJF-3A
Apr 11, 2012
Revised
AS3243C
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi UTS min, .1900-32 UNJF-3A
Apr 11, 2012
Revised
AS3244C
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Nickel Alloy, UNS N07718, 185 ksi Min UTS, .2500-28 UNJF-3A
Aug 27, 2012
Revised
AS3245C
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A
Oct 22, 2012
Revised
AS3246C
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A
Nov 01, 2012
Revised
AS3247C
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A
Dec 12, 2012
Revised
AS3248C
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Nickel Alloy, UNS N07718, 185 ksi Min, .5000-20 UNJF-3A
Jan 03, 2013
Revised
AS3249C
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A
Mar 25, 2013
Revised
AS3250C
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Nickel Alloy, UNS N07718, 185 ksi Min, .1900-32 UNJF-3A
Jan 03, 2013
Revised
AS3251C
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Nickel Alloy, UNS N07718, 185 ksi Min, .2500-28 UNJF-3A
Jan 03, 2013
Revised
AS3252C
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Nickel Alloy, UNS N07718, 185 ksi Min, .3125-24 UNJF-3A
Jan 03, 2013
Revised
AS3253C
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A
Feb 10, 2013
Revised
AS3254C
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A
Apr 02, 2013
Revised
AS3255C
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A
Feb 10, 2013
Revised
AS3256C
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A
Apr 02, 2013
Revised
AS3261
Nut, Self-Locking, Clip, Floating, Ams 7251
Jul 30, 2004
Reaffirmed
AS3262A
Nut, Self-Locking, Plate - 2 Lug, Floating, Cbored, UNS S66286
May 03, 2006
Reaffirmed
AS3265
Washer - Flat Load Spreading, Metric, AMS 5525
Nov 01, 2012
Reaffirmed
AS3268A
Sleeve Half - Reinforcing, Tube
Nov 01, 2012
Reaffirmed
AS3269A
Sleeve Half - Reinforcing, Tube, Shoulder
Nov 01, 2012
Reaffirmed
AS3272
Nut - Self-Locking, Clinch, Serrated Shank, 700 Degrees F, Dry Film Coated, Uns S66286, Unj Thread
Jul 23, 2004
Reaffirmed
AS3273
Nut - Self-Locking, Clinch, Serrated Shank, 1200 Degrees F, Silver Plated, Uns S66286, Unj Thread
Jul 23, 2004
Reaffirmed
AS3282B
Gasket - 37° Flared Tube Fitting, Nickel, AMS 5553
Feb 07, 2007
Revised
AS3291
Nut, Self-Locking, Double Hexagon, Ams 5709
Jul 23, 2004
Reaffirmed
AS3293A
Gasket - 37° Flared Tube Fitting, Copper, AMS 4500
Jun 27, 2007
Reaffirmed
AS3298
Cushion - Tube Clamp Support, PTFE, Inch
Nov 01, 2012
Reaffirmed
AS33
Nuts, Plain Hexagon - Aircraft Engine
Jul 23, 2002
Canceled
AS3303
Bolt, Machine - Hexagon Head, PD Shank, AMS 5708, .190-32 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3307
Bolt, Machine - Hexagon Head, PD Shank, AMS 5708, .250-28 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3308
Bolt, Machine - Hexagon Head, PD Shank, AMS 5708, .3125-24 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3309
Bolt, Machine - Hexagon Head, PD Shank, AMS 5708, .375-24 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3319D
Stud - Straight, Ring Locked, Cres AMS5731, .190-24UNJC X .190-32UNJF
Jun 02, 2010
Revised
AS3320D
Stud - Straight, Ring Locked, Cres AMS5731, .250-20UNJC X .250-28UNJF
Jun 02, 2010
Revised
AS3321D
Stud - Straight, Ring Locked, Cres AMS5731, .3125-18UNJC X .3125-24UNJF
Jun 02, 2010
Revised
AS3322D
Stud - Straight, Ring Locked, Cres AMS5731, .375-16UNJC X .375-24UNJF
Jun 02, 2010
Revised
AS3326A
Nut, Self-Locking-Captive Washer, Steel
Feb 03, 2011
Revised
AS3332B
Gasket - Copper, Tube Connection, Plain
Dec 20, 2011
Revised
AS338
Shipping Containers - Aircraft Engines and Components
Jan 01, 1988
Canceled
AS3397
Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251
May 05, 2006
Reaffirmed
AS339B
Cover - Shipping Container Log Data and Inspection Port
Jan 04, 2013
Stabilized
AS340
Cover - Shipping Container Inspection Port
Jul 23, 2004
Reaffirmed
AS3400
Bolt, Machine-Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .190-32 UNJF-3A
May 08, 2006
Reaffirmed
AS3401
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .250-28 UNJF-3A
May 03, 2006
Reaffirmed
AS3402
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .3125-24 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3403
Bolt, Machine-Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .375-24 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3404
Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, AMS 5708, .190-32 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3405
Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, AMS 5708, .250-28 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3406
Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, AMS 5708, .3125-24 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3407
Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, AMS 5708, .375-24 UNJF-3A
Oct 10, 2006
Reaffirmed
AS3409A
Bolt, Tee Head - AMS5662, Chamfered, PD Shank, .1900-32 UNJF-3A (Stress Rupture Resistant)
Jan 03, 2013
Revised
AS3410B
Bolt, Tee Head - AMS5662, Chamfered, .250-28 UNJF-3A (Stress Rupture Resistant)
Jan 03, 2013
Revised
AS3411B
Bolt, Tee Head, AMS5662, Chamfered, .3125-24 UNJF-3A (Stress Rupture Resistant)
Jan 03, 2013
Revised
AS3412B
Bolt, Tee Head - AMS5662, Chamfered, .375-24UNJF-3A (Stress Rupture Resistant)
Jan 03, 2013
Revised
AS3413A
Bolt, Machine-Hexagon Head, PD Shank, UNS N07718, .190-32UNJF-3A (Stress Rupture Resistant)
Jan 03, 2011
Revised
AS3414A
Bolt, Machine-Hexagon Head, PD Shank, UNS N07718, .250-28UNJF-3A (Stress Rupture Resistant)
Jun 22, 2011
Revised
AS3415A
Bolt, Machine-Hexagon Head, PD Shank, UNS N07718,, .3125-24 UNJF-3A (Stress Rupture Resistant)
Aug 08, 2011
Revised
AS3416A
Bolt, Machine-Hexagon Head, PD Shank, UNS N07718, .375-24UNJF-3A (Stress Rupture Resistant)
Sep 02, 2011
Revised
AS3417A
Bolt, Machine, Double Hex Extended Washer Head, Close Tolerance Shank, UNS N07718, .1900-32 UNJF-3A (Stress Rupture Resistant)
Oct 20, 2011
Revised
AS3418A
Bolt, Machine, Double Hex Ext Washer Head, Close Tolerance Shank, UNS N07718, .2500-28UNJF-3A (Stress Rupture Resistant)
Oct 20, 2011
Revised
AS3419B
Bolt, Machine, Double Hex, Ext Washer Head, Close Tolerance Shank, UNS N07718, .3125-24 UNJF-3A (Stress Rupture Resistant)
Aug 30, 2012
Revised
AS3420A
Bolt, Machine, Double Hex Ext Washer Head, Close Tolerance Shank, UNS N07718, .3750-24 UNJF-3A (Stress Rupture Resistant)
Oct 20, 2011
Revised
AS3435
Spacer, Sleeve - For .190 Inch Bolt, AMS4901 or AMS4921
Nov 01, 2012
Reaffirmed
AS3436
Spacer, Sleeve - For .250 Inch Bolt, AMS4901 or AMS4921
Nov 01, 2012
Reaffirmed
AS3472A
Ring, Retaining - Internal, Spiral Wound Heavy and Medium Duty, UNS S66286
Nov 01, 2012
Reaffirmed
AS3477A
Nut, Self Locking - Double Hexagon, Extended Washer, UNS S66286, Silver Plated, UNJ Thread
May 10, 2006
Reaffirmed
AS3478C
Nut, Self-Locking, Plate, Two Lug, Low Height, UNS S66286, Class: 125 ksi/800 °F
Jun 28, 2007
Reaffirmed
AS3479E
Nut, Self-Locking, Plate, One Lug, Floating, Low Height, UNS S66286, Class: 125 ksi/800 °F
Nov 01, 2012
Reaffirmed
AS3480C
Nut, Self-Locking, Plate, One Lug, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 °F
Jun 28, 2007
Reaffirmed
AS3481E
Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 °F
Jun 28, 2007
Reaffirmed
AS3482C
Nut, Self-Locking, Plate, Side By Side, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 °F
Jun 28, 2007
Reaffirmed
AS3483A
Nut, Self-Locking, Hexagon, Regular Height, UNS S66286, Class: 125 ksi/800 °F
May 10, 2006
Reaffirmed
AS3484B
Gasket - 37° Flared Tube Fitting, Nickel, AMS 5553
Feb 07, 2007
Revised
AS3485
Nut, Self-Locking, 12 Point, Reduced Height, Silver Plate, Uns S66286
Jul 23, 2004
Reaffirmed
AS3486D
Nut, Self-Locking, Extended Double Hexagon, Reduced Flange, Dry Film Lube, UNS S66286, Class: 160 ksi/800 °F
Jul 15, 2010
Revised
AS3490
Stud-Stepped, 1.5 Dia Engagement, .375-16 Unjc-3a Mod X .3125-24 Unjf-3a (Uns S66286)
Jul 23, 2004
Reaffirmed
AS3491
Gasket - Type X Or Xv Engine Accessory Drive
Jul 23, 2004
Reaffirmed
AS3492
Gasket - Type Xi Engine Accessory Drive
Jul 23, 2004
Reaffirmed
AS3493
Gasket - Type Xii, Xiv a and Xiv B Engine Accessory Drive
Jul 23, 2004
Reaffirmed
AS3494
Gasket - Type Xiii Engine Accessory Drive
Jul 23, 2004
Reaffirmed
AS3495
Gasket - Type Xiv-C Engine Accessory Drive
Jul 23, 2004
Reaffirmed
AS3496
Gasket - Type Xvi Engine Accessory Drive
Jul 23, 2004
Reaffirmed
AS3497
Gasket - Type Xix Engine Accessory Drive
Jul 23, 2004
Reaffirmed
AS3498
Gasket - Engine Accessory Drive
Jul 23, 2004
Reaffirmed
AS3502
Insert, Screw Thread, Self Locking Plastic Locking Device, Solid Film Lubricated Self-Broaching Keys, UNS S66286
Jul 05, 2007
Issued
AS3503
Insert, Screw Thread, Self Locking Plastic Locking Device, Solid Film Lubricated, Self-Broaching Keys, Oversize UNS S66286
Jul 05, 2007
Issued
AS3504B
INSERT - THIN WALL, SHORT, SELF-LOCKING, 1025 °F, SILVER PLATED ON INTERNAL SURFACES ONLY UNS N07718, UNJ THREAD
Oct 22, 2012
Revised
AS3505B
INSERT - THIN WALL, LONG, SELF-LOCKING, 1025 °F, SILVER PLATED ON INTERNAL SURFACES ONLY, UNS N07718, UNJ THREAD
Oct 22, 2012
Revised
AS3506A
Insert - Screw Thread, Thin Wall, Self-Locking Uns N07718, Silver Plated, Class: 185 Ksi/1025 Degrees F, Procurement Specification
Mar 24, 2004
Revised
AS3507B
Insert - Thin Wall, Self-Locking Short and Long Length Installation and Removal Of
Nov 01, 2012
Reaffirmed
AS3508
Insert - Thin Wall, Short and Long Hole Preparation For
Jul 23, 2004
Reaffirmed
AS3509B
Cable, Safety, Kit, Nickel Alloy, UNS N0660
Nov 01, 2012
Reaffirmed
AS3510B
Cable, Safety, Kit, Corrosion and Heat Resistant Steel, UNS S32100
Nov 01, 2012
Reaffirmed
AS3511B
Cable, Safety, Kit - Corrosion Resistant Steel, UNS S30400
Nov 01, 2012
Reaffirmed
AS3528
Bolt, Shear - Double Hex Head, Uns S66286 - 160 Ksi
Nov 01, 2012
Reaffirmed
AS3529
Bolt, Shear - Double Hex Head, Drilled Shank Uns S66286 - 160 Ksi
Nov 01, 2012
Reaffirmed
AS3530
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, Uns S66286 - 160 Ksi
Nov 01, 2012
Reaffirmed
AS3531
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, Drilled Head, Uns S66286 - 160 Ksi
Nov 01, 2012
Reaffirmed
AS3532
Bolt, Shear - Double Hex Head, Drilled Shank Uns N07718 - 185 Ksi
Nov 01, 2012
Reaffirmed
AS3534A
Nut, Self-Locking, Shank, UNS S66286 Silver Plate on Thd Only, UNJ Thread
Nov 01, 2012
Reaffirmed
AS3535A
Nut, Self-Locking, Shank, UNS N07001 Silver Plate, UNJ Thread
Nov 01, 2012
Reaffirmed
AS3542
Cover - Type XVI, XVII-C, D, E, and F Engine Accessory Drive
Nov 01, 2012
Reaffirmed
AS3543
Stud, Locked In, Key Locked, Uns S66286, 140 Ksi/1200Mdf, Lightweight, Self-Broaching Keys
Nov 01, 2012
Reaffirmed
AS3544
Stud, Locked In, Key Locked, Uns S66286, 140 Ksi/1200Mdf, Heavy-Duty, Self-Broaching Keys
Nov 01, 2012
Reaffirmed
AS3545
Insert, Screw Thread, Self-Locking, Locked In, Key Locked, Heavy-Duty, Self-Broaching Keys, Uns S66286
Nov 01, 2012
Reaffirmed
AS3546A
Insert, Screw Thread, Self-Locking, Locked In, Key Locked, Extra Heavy Duty, Self-Broaching Keys, UNS S66286
Nov 27, 2012
Reaffirmed
AS3547
Assembly Nut and Clip, Removable Self-Locking Nut, UNS S66286
May 03, 2006
Reaffirmed
AS3548
Basket, Removable Self-Locking Nut, UNS S66286
May 03, 2006
Reaffirmed
AS3549
Sleeve, Removable Self-Locking Nut, UNS S30403
May 03, 2006
Reaffirmed
AS3550
Assembly Nut, Plate, Removable Self-Locking Nut
Nov 01, 2012
Reaffirmed
AS3551
Packing, Preformed - O-Ring Seal, AMS 7272
Nov 01, 2012
Reaffirmed
AS3552A
Nut, Self-Locking, Double Hexagon, Silver Plated, Extended Wrench Pad 180 ksi, 1400 °F, UNS N07001
Nov 01, 2012
Reaffirmed
AS3553A
Nut, Self-Locking, Double Hexagon, Silver Plated, Counterbored 180 ksi, 1400 °F, UNS N07001
Nov 01, 2012
Reaffirmed
AS3554A
Nut, Self-Locking, Double Hexagon, Silver Plated, Reduced Height 180 ksi, 1400 °F, UNS N07001
Nov 01, 2012
Reaffirmed
AS3563C
Nut, Self-Locking, Double Hexagon, Solid Film Lubricated, Extended Wrench Pad 160 KSI, 800 °F, UNS S66286
Jul 15, 2010
Revised
AS3564D
Nut, Self-Locking, Double Hexagon, Solid Film Lubricated, Counterbored 160 ksi, 800 °F, UNS S66286
Aug 29, 2011
Revised
AS3565
Washer, Flat, Countersunk UNS S66826
May 05, 2006
Reaffirmed
AS3566
Nut, Self-Locking, Castellated, Prevailing Torque, UNJ 16 Pitch Thread Form
May 05, 2006
Reaffirmed
AS3568
Screw, Drive, Round Head, Type U AMS 5504 (UNS S41000)
Nov 01, 2012
Reaffirmed
AS3569
Packing, Preformed - O-Ring Seal, AMS 7270
Nov 01, 2012
Reaffirmed
AS3570
Packing, Preformed - O-Ring Seal, AMS 7274
Nov 01, 2012
Reaffirmed
AS3572
Insert, Screw Thread, Non-Locking, Locked In, Key Locked, Heavy-Duty, Self-Broaching Keys, Uns S66286
Nov 01, 2012
Reaffirmed
AS3573A
Insert, Screw Thread, Non-Locking, Locked In, Key Locked, Extra Heavy-Duty, Self-Broaching Keys, UNS S66286
Nov 01, 2012
Reaffirmed
AS3574A
Bolt, Shear - Double Hex Head, UNS N07718 - 185 ksi
May 02, 2006
Reaffirmed
AS3577
Pin, Spring - Tubular, Coiled, Standard Duty, UNS N07718
Nov 01, 2012
Reaffirmed
AS3578
Packing, Preformed - O-Ring Seal, AMS 7271
Nov 01, 2012
Reaffirmed
AS3580
Bolt, Machine - Double Hex Head, PD Shank, UNS N07718 - 185 ksi
May 05, 2006
Reaffirmed
AS3581
Packing, Preformed - O-Ring Seal, AMS 7259
Nov 01, 2012
Reaffirmed
AS3582
Packing, Preformed - O-Ring Seal, AMS 3304
Nov 01, 2012
Reaffirmed
AS3584A
Pin and Plug, Expansion, Set of Parts Cres, 416 or 416SE, Long; STD and .010 Oversize Diameters, UNS S41600/UNS S41623
Feb 05, 2009
Revised
AS3585A
Pin and Plug, Expansion, Set of Parts Cres, 416 or 416SE, STD and .010 Oversize Diameters, Short, UNS S41600/UNS S41623
Feb 05, 2009
Revised
AS3586A
Pin and Plug, Expansion, Set of Parts Cres, 303, Long, UNS S30300
Feb 04, 2009
Revised
AS3587A
Pin and Plug, Expansion, Set of Parts, STD and 0.10 Oversize Diameters, Cres 303, Short, UNS S30300
Feb 04, 2009
Revised
AS3588A
Pin and Plug, Expansion, Set of Parts AL Alloy 2024-T4 and 2024-T351, Short; STD and .010 Oversize Diameters, UNS A92024
Feb 05, 2009
Revised
AS3589B
Pin and Plug, Expansion Set of Parts, Al Alloy 2024-T4 and 2024-T351, Long; Std and .010 Oversize Diameters (UNS A92024)
Mar 15, 2010
Revised
AS3601
Nut, Floating, Self-Locking, Attached Retention Element, 450 °F, 125 ksi FTU, UNS S66286
May 09, 2006
Reaffirmed
AS3602
Nut Element, Attached Retention Element, 450 °F, 125 ksi FTU, UNS S66286
May 09, 2006
Reaffirmed
AS3611A
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cobalt-Nickel Alloy UNS R30159, 260 Ksi Min
Jun 10, 2011
Revised
AS3613A
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Cobalt-Nickel Alloy, UNS R30159, 260 ksi Min
Oct 02, 2007
Canceled
AS3616
Nut, Self-Locking, Double Hexagon Reduced Flange, Solid Film Lube Counterbored 180 ksi, 1400 °F, UNS N07001
Nov 01, 2012
Reaffirmed
AS3618
Cable, Safety, Ferrule, Elongated, Corrosion and Heat Resistant Steel, UNS S32100
Mar 10, 2011
Issued
AS3619A
Cable, Safety, Ferrule, Elongated, Nickel Alloy, UNS N06600
Dec 05, 2012
Revised
AS3622A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, Cobalt-Nickel Alloy, UNS R30159, 260 ksi Min
Oct 02, 2007
Canceled
AS3623
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cobalt-Nickel Alloy, Uns R30159, 260 Ksi Min
Mar 19, 2004
Issued
AS3625A
Nut, Self-Locking, Double Hexagon, Reduced Envelope, UNS S66286, Silver Plated Threads Only
Apr 12, 2012
Revised
AS3626A
Nut, Self-Locking, Double Hexagon, Reduced Envelope, UNS S66286, Counterbored Silver Plated Threads Only
Apr 12, 2012
Revised
AS3650A
Bolt, Machine - Double Hex Head, Reduced Shank, UNS N07718 - 185 Ksi
May 10, 2010
Revised
AS3655
CABLE, SAFETY, NICKEL ALLOY, CORROSION RESISTANT (UNS N06625)
May 04, 2009
Issued
AS3658A
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Cobalt-Nickel Alloy, UNS R30159, 260 ksi min
Jun 08, 2009
Revised
AS3659
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, Cobalt-Nickel Alloy, UNS R30159, 260 ksi min
Oct 18, 2007
Issued
AS41F
Propeller Shaft Ends - Single Rotation
Jan 04, 2013
Stabilized
AS4299A
Rings, Retaining - Spiral Wound, Uniform Section Corrosion and Heat Resistant, UNS S66286
Nov 01, 2012
Reaffirmed
AS4389
Nut - Self-Locking Clinch, Serrated Shank, Hole Preparation, Installation and Removal Procedures
Nov 01, 2012
Reaffirmed
AS4393B
Nut, Self-Locking, UNS S66286, 1200 °F, 160 000 psi, UNJ Thread
Oct 11, 2006
Reaffirmed
AS4417
Nuts, Self-Locking, Alloy, Corrosion and Heat Resistant High Strength, All Metal, Dry Film Lubricated, 1400 °F (760 °C), Procurement Specification
May 04, 2006
Reaffirmed
AS44B
Starter, Mounting Pads and Drives - Types I, II, III & IV
Jan 04, 2013
Stabilized
AS4506B
Bolts and Screws, Steel, UNS S66286 Tensile Strength 160 ksi, Procurement Specification
Dec 15, 2009
Revised
AS4536B
Safety Cable Kit Procurement Specification and Requirement for Use
Nov 01, 2012
Reaffirmed
AS45909
Stud, Locked In, Ring Locked, Serrated, General Specification For
Jul 05, 2007
Issued
AS462
Shafts for Ball Bearing Retaining Spanner Nuts and Key Washers
Nov 01, 2012
Reaffirmed
AS469B
Drive - Accessory, 8" Bolt Circle
May 03, 2006
Reaffirmed
AS4723
Insert, Screw Thread, Self-Locking, UNS S66286, Key Locked, Plastic Self Locking Device, Solid Film Lubricant, Procurement Specification For
Nov 01, 2012
Reaffirmed
AS4724
Studs and Inserts, Locked In, Self-Broaching Keys - Hole Dimensions and Installation Requirements
Jul 05, 2007
Issued
AS4726
Nuts, Self-Locking, UNS S66286 Classification: 220 ksi/850 °F Procurement Specification
Oct 11, 2006
Reaffirmed
AS478N
Identification Marking Methods
Jul 03, 2007
Revised
AS47A
Pump, Fuel, Mounting Pad and Drive
Feb 23, 2004
Reaffirmed
AS4847A
Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For
Nov 01, 2012
Reaffirmed
AS4877C
Bolts and Screws, Nickel Alloy UNS N07718, Classification: 185 ksi/1200 °F, Procurement Specification
Mar 10, 2012
Revised
AS4891
Stud, Locked In, Key Locked, Uns S66286, Classification: 140 Ksi, Procurement Specification For
Nov 19, 2012
Reaffirmed
AS4892A
Insert, Screw Thread, Self-Locking, UNS S66286, Locked In, Key Locked, Procurement Specification For
Nov 19, 2012
Reaffirmed
AS49011
Rod End - Threaded, Aircraft
May 01, 1999
Issued
AS4958
Performance, Nut, Self-Locking, Castellated, Prevailing Torque, UNJ 16 Pitch Thread Form
May 04, 2006
Reaffirmed
AS4959
Bolts and Screws, Steel, UNS S66286 Tensile Strength 140 ksi 1650 °F Solution Heat Treatment Aged Before Fillet and Thread Rolling Procurement Specification
Nov 19, 2012
Reaffirmed
AS4976
Insert, Screw Thread, Non-Locking, Uns S66286, Locked In, Key Locked, Procurement Specification For
Nov 19, 2012
Reaffirmed
AS4983
Spring Pins, Tubular, Coiled Corrosion Resistant Nickel Base Alloy Procurement Specification For
Nov 19, 2012
Reaffirmed
AS5054A
Areas for Calculating Stress Or Load Values for Externally and Internally Threaded Fasteners
Nov 19, 2012
Reaffirmed
AS5133
Nut, Floating, Attached Retention Element (A.R.E.) - Hole Dimensions and Installation Requirements
Nov 19, 2012
Reaffirmed
AS51989A
Stud, Locked In-Ring Locked, Serrated
Jun 29, 2006
Revised
AS51990A
Ring, Lock, Serrated
Dec 29, 2005
Revised
AS51992A
Stud, Locked In-Ring, Serrated, High Strength
Nov 19, 2012
Reaffirmed
AS51997B
Ring, Lock, Serrated-High Strength
Oct 27, 2005
Revised
AS5272E
Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification
May 12, 2011
Revised
AS5377
Nut, Self-Locking, 0.7500 Thru 1.5000 Thread Sizes, Uns S66286, 160,000 Psi, 800Mdf, Unj Thread - Procurement Specification
Nov 19, 2012
Reaffirmed
AS54
Tachometer Drive - Type I
Nov 19, 2012
Reaffirmed
AS5443A
Wrenching Element, Spline Drive - Dimensions For
Nov 19, 2012
Reaffirmed
AS5447
Acceptance Criteria for Nuts - Magnetic Particle, Fluorescent Penetrant, and Visible Penetrant Examination
Nov 19, 2012
Reaffirmed
AS5528A
Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting
Jul 01, 2009
Revised
AS55B
Tachometer Mounting Pad and Drive - Type II
Jan 04, 2013
Stabilized
AS567J
Safety Cable, Safety Wire, Key Washers, and Cotter Pins for Propulsion Systems, General Practices for Use Of
May 10, 2006
Reaffirmed
AS5685
Steel, Corrosion Resistant, Safety Wire, 18Cr-11.5Ni (UNS S30500), Solution Heat Treated, Cold Finished
Aug 10, 2006
Issued
AS56C
Lever Ends - Fuel and Power Control
Nov 19, 2012
Reaffirmed
AS5870
Thread Inspection Practices
Jan 26, 2010
Issued
AS5878
Nut, Self-Locking, Nickel Alloy, Uns N07001, 1400 Uof, 180,000 Psi, Unj Thread Procurement Specification
Jun 24, 2005
Issued
AS6140
Nut, Spanner, Bearing Retaining, Phosphate Treated, Aeronautical, UNS G41400
Aug 23, 2010
Issued
AS6146
Nut, Self Locking, Double Hexagon, Reduced Envelope, UNS66286
Mar 29, 2011
Issued
AS63B
Carburetor Flange, Aircraft, 4 Bolt - Single Barrel - No. 2, 3, 4, 5, 7 and 9
Jan 03, 2013
Stabilized
AS683D
Installation Procedures and Torques for Fluid Connections
Mar 01, 2012
Revised
AS685D
Piloted Ring Seal Fluid Connection Bosses
Mar 01, 2012
Revised
AS686B
Piloted Ring Seal Tube Swivel Connection Assembly
Nov 19, 2012
Reaffirmed
AS701C
Boss Design for Spark Igniters
May 03, 2006
Reaffirmed
AS7205
Spring Pins, Tubular, Carbon Steel, Procurement Specification for
Nov 19, 2012
Reaffirmed
AS7207
Spring Pins, Tubular, Slotted Corrosion and Moderate Heat Resistant Steel Procurement Specification For
Nov 19, 2012
Reaffirmed
AS7210A
Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification For
Nov 19, 2012
Reaffirmed
AS7211A
Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification
Nov 19, 2012
Reaffirmed
AS7220
Aluminum Rivets, UNS A91100, 99Al (1100-H14)
May 04, 2006
Reaffirmed
AS7222A
Aluminum Rivets, Uns A92117 2.5cu 0.3mg (2117-T4) Procurement Specification
Feb 05, 2004
Reaffirmed
AS7225A
Rivets, Carbon Steel, Procurement Specification For
Mar 12, 2010
Revised
AS7228
Rivets, Steel, Corrosion Resistant 18Cr-9Ni Solution Heat Treated Procurement Specification For
May 10, 2006
Reaffirmed
AS7229
Rivets, Steel, Corrosion and Heat Resistant 18cr 10.5ni 0.70(Cb + Ta) Solution Heat Treated Procurement Specification For
Jul 27, 2004
Reaffirmed
AS7232
Rivets, Solid and Tubular, Nickel Alloy Corrosion and Heat Resistant 74ni 15.5cr 8.0fe Procurement Specification For
Nov 19, 2012
Reaffirmed
AS7233
Rivets, Solid, Uns N04400, Corrosion Resistant 67ni 31cu Procurement Specification For
Nov 19, 2012
Reaffirmed
AS7234
Rivets, Blind, Corrosion Resistant Alloy 67ni 31cu Procurement Specification For
Nov 19, 2012
Reaffirmed
AS7235
Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification For
Nov 19, 2012
Reaffirmed
AS7236
Rivets, Alloy, Corrosion and Heat Resistant 52co 20cr 10ni 15w Solution Heat Treated Procurement Specification For
Nov 19, 2012
Reaffirmed
AS7237
Rivets, Nickel Alloy, Corrosion and Heat Resistant 47.5ni 22cr 1.5co 9.0mo 0.60w 18.5fe Solution Heat Treated Procurement Specification For
Nov 19, 2012
Reaffirmed
AS7240
Washers, Spring Lock, Carbon Steel, Procurement Specification for
Nov 07, 2006
Issued
AS7241A
Washers, Spring Lock, Corrosion Resistant Steel 18Cr - 9Ni (UNS S30200), Procurement Specification for
Oct 21, 2011
Revised
AS7245A
Inserts, Screw Thread, Helical Coil 19Cr-9.2Ni, Corrosion Resistant Steel, Procurement Specification For
Nov 19, 2012
Reaffirmed
AS7246
Inserts, Screw Thread, Helical Coil 72ni 15.5cr 0.95(Cb+Ta) 2.5ti 0.70al 7.0fe Corrosion and Heat Resistant Alloy Procurement Specification For
Nov 19, 2012
Reaffirmed
AS7250C
Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UN Thread Form
Dec 19, 2008
Revised
AS7251B
Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UNJ Thread Form
Oct 11, 2006
Reaffirmed
AS7252
Nuts, Self-Locking, Steel High Strength, All Metal 450 °F Use, UNJ Thread Form
May 08, 2006
Reaffirmed
AS7253B
Nuts, Self-Locking, Nickel Alloy, UNS N07001 Classification: 180 ksi/1400 °F, Procurement Specification
Oct 11, 2006
Reaffirmed
AS7283B
Gaskets, Type Xx Engine Accessory Drive Corrosion Resistant Steel Screen Reinforced Controlled Performance
Nov 19, 2012
Reaffirmed
AS7325B
Gasket, Metal O-Ring Corrosion and Heat Resistant Steel Procurement Specification For
Nov 19, 2012
Reaffirmed
AS7330
Rings, Retaining - Spiral Wound, Uniform Section Corrosion Resistant Steel Procurement Specification For
Nov 19, 2012
Reaffirmed
AS7351
Clamp, Loop Type Bonding
Jun 27, 2007
Reaffirmed
AS7431A
Bracket, Support Clamp
Mar 12, 2013
Revised
AS7452A
Bolts and Screws, Steel, Low Alloy Heat Treated, Roll Threaded
Apr 24, 2009
Revised
AS7454A
Bolts and Screws, Steel, Low Alloy, Heat Resistant 135 000 psi Tensile Strength, Normalized and Tempered, Roll Threaded
Jul 14, 2009
Revised
AS7455A
Bolts and Screws, Steel, Low Alloy, Heat Resistant Hardened and Tempered, Roll Threaded
Jul 10, 2009
Revised
AS7456B
Studs, Steel, Low Alloy, Heat Treated, Roll Threaded
Jun 24, 2010
Revised
AS7458A
Studs, Steel, Low Alloy, Heat Resistant, Normalized and Tempered, Roll Threaded, 135 000 psi Tensile Strength
Jul 20, 2009
Revised
AS7459B
Bolts and Screws, Steel UNS K14675 Tensile Strength 195 ksi Fatigue and Stress-Rupture Rated Procurement Specification
Nov 30, 2009
Revised
AS7460A
Bolts and Screws, Titanium Alloy, 6.0Al - 4.0V, Procurement Specification For
Dec 09, 2009
Revised
AS7461B
Bolts and Screws, Titanium Alloy 6Al-4V, UNS R56400 Fatigue-Rated, Procurement Specification For
Jun 19, 2006
Revised
AS7466C
Bolts and Screws, Nickel Alloy, UNS N07718 Tensile Strength 185 ksi, Fatigue Rated, Procurement Specification
Aug 30, 2012
Revised
AS7467A
Bolts and Screws, Nickel Alloy, UNS N07718 Tensile Strength 185 ksi Stress Rupture Rated Procurement Specification
May 08, 2006
Reaffirmed
AS7468B
Bolts, Cobalt-Chromium-Nickel Alloy, Uns R30035, Tensile Strength 260 Ksi, Procurement Specification
Nov 19, 2012
Reaffirmed
AS7469A
Bolts and Screws, Uns N07041 Nickel Alloy, Corrosion and Heat Resistant, 155 Ksi, Procurement Specification
Feb 03, 2011
Revised
AS7470C
Bolts and Screws, Steel, Corrosion and Moderate Heat Resistant Heat Treated, Roll Threaded
Nov 19, 2012
Reaffirmed
AS7471F
Bolts and Screws, Nickel Alloy, UNS N07001 Tensile Strength 165 ksi, Corrosion and Heat Resistant, Procurement Specification
Jan 15, 2013
Revised
AS7472A
Bolts and Screws, Steel, Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded
Jun 17, 2010
Revised
AS7473B
Bolts and Screws Roll Threaded Procurement Specification For
Oct 03, 2011
Revised
AS7474C
Bolts and Screws, Steel, Corrosion Resistant, UNS S17400 Tensile Strength 140 Ksi Procurement Specification
Oct 28, 2011
Revised
AS7475D
Bolts, Cobalt-Chromium-Nickel Alloy, UNS R30159, Tensile Strength 260 ksi, Procurement Specification
Aug 13, 2010
Revised
AS7477E
Bolts and Screws, Steel, Uns S66286 Tensile Strength 130 Ksi, Procurement Specification
Oct 11, 2011
Revised
AS7478B
Bolts and Screws, Steel, UNS S66286 Classification: 130 ksi/1200 °F 1800 °F Solution Heat Treated, Aged After Roll Threaded Procurement Specification For
May 10, 2006
Reaffirmed
AS7479B
Bolts and Screws, Steel, UNS S66286 1650 °F Solution Heat Treated Precipitation Heat Treated Before Roll Threaded
Nov 19, 2012
Reaffirmed
AS7481B
Studs, Steel, UNS S66286, Aged After Roll Threaded, Procurement Specification For
May 02, 2006
Reaffirmed
AS7482B
Studs, Corrosion and Heat Resistant Steel, UNS S66286, Tensile Strength 130 ksi, 1800 °F Solution Heat Treated, Aged Before Roll Threading Procurement Specification
Sep 01, 2009
Revised
AS82B
Screw Thread Form, American National, Modified (National Round - NR)
Nov 19, 2012
Reaffirmed
AS848
Attachment Points, Engine, Remote Trimming Main Fuel Control
Nov 19, 2012
Reaffirmed
AS84C
Splines, Involute (Full Fillet)
Jul 23, 2004
Reaffirmed
AS870D
Wrenching Configuration, Bi-Hexagonal (12 Point) Drive, Design Standard For
May 02, 2006
Reaffirmed
AS87132
Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application to Fasteners
Nov 19, 2012
Reaffirmed
AS871B
Manufacturing and Inspection Standards for Preformed Packings (O-Rings)
Nov 19, 2012
Reaffirmed
AS880
Propeller Shaft End - Flanged 4.250 (107.95) Bolt Circle
Nov 19, 2012
Reaffirmed
AS8879D
Screw Threads - Unj Profile, Inch Controlled Radius Root With Increased Minor Diameter
Nov 19, 2012
Reaffirmed
AS8991
Gasket, Fuselage Light - Cover Screw
Nov 19, 2012
Reaffirmed
AS9025A
Clamp - Loop Type Support (Heat Resistant) .265 Hole
Jul 05, 2007
Canceled
AS903
Remote Trimming Attachment for Aircraft Turbine Engine Controls
Nov 19, 2012
Reaffirmed
AS9047B
Pin - Spring, Steel, Phosphate Finish
Oct 15, 2012
Stabilized
AS9058B
Ring - Back-Up, Boss Connection, AMS 3652, AMS 3656, AMS 3660, AMS 3667
Jun 27, 2007
Reaffirmed
AS90708
Ring, Retaining, External, Interlocking
May 04, 2006
Reaffirmed
AS90991B
Nut, Hexagon, Drilled, Boss Connection, Aluminum - UNS A92024
Jun 28, 2007
Reaffirmed
AS90B
Propeller Blades, Aluminum Alloy, Shank Dimensions For
Mar 12, 2013
Stabilized
AS91001C
Nut, Hexagon, Drilled, Boss Connection, Cres - UNS S30400
Dec 12, 2012
Revised
AS9105
Pin, Straight, Headless, AMS 5688, Lock
Jun 27, 2007
Reaffirmed
AS91101B
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, UNS S66286, 130 KSI Min, .1900-32 UNJF-3A
Jul 25, 2011
Revised
AS91111B
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, UNS S66286 130 Ksi Min, .2500-28 UNJF-3A
Jul 25, 2011
Revised
AS9112B
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, UNS S66286, 130 ksi, .3125-24 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9141B
Gasket - Metal O-Ring, .035 Tube X .006 Wall, Cres
Nov 19, 2012
Reaffirmed
AS9142B
Gasket - Metal O-Ring, .062 Tube X .006 Wall, Cres
Nov 19, 2012
Reaffirmed
AS9144B
Gasket - Type XX Engine Accessory Drive
Nov 19, 2012
Reaffirmed
AS9158
Bolt-Machine, Steel, 12 Point Head, .250-28, Black Oxide
Nov 19, 2012
Reaffirmed
AS91601B
Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Black Oxide, Steel, Uns G87400, 125 Ksi Min, .375-24, Unf-3a
Nov 19, 2012
Reaffirmed
AS91641A
Pin, Straight, Headless, Oversize, Steel, UNS G10950
Nov 19, 2012
Reaffirmed
AS91691A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .1900-32 UNF-3A
Jun 26, 2007
Reaffirmed
AS91701A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .2500-28 UNF-3A
Jun 26, 2007
Reaffirmed
AS91711A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .3125-24 UNF-3A
Jun 26, 2007
Reaffirmed
AS91721A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 ksi min .375-24 UNF-3A
Jun 26, 2007
Reaffirmed
AS91761A
Plug, Expansion - Tapered, AMS 5040
Aug 18, 2005
Canceled
AS919
Shallow Groove Shafts and Locking Devices for Bearing Retaining Spanner Nuts
Nov 19, 2012
Reaffirmed
AS91D
Propeller Shaft Ends, Dual Rotation (Propeller Supplied Bearing)
Mar 12, 2013
Stabilized
AS92001B
Nut, Hexagon, Drilled, Boss Connection, Aluminum - UNS A92014
Oct 28, 2011
Revised
AS9201C
Nut, Plain, Hexagon, Boss Connection, Silver Plated, 347 Cres UNS S34700
Nov 19, 2012
Reaffirmed
AS9202B
Gasket - Metal O-Ring, .062 Tube X .010 Wall, Cres Uns S32100
Nov 19, 2012
Reaffirmed
AS9203B
Gasket - Metal O-Ring, .094 Tube X .006 Wall, Cres Uns S32100
Nov 19, 2012
Reaffirmed
AS9204B
Gasket - Metal O-Ring, .094 Tube X .010 Wall, Cres Uns S32100
Nov 19, 2012
Reaffirmed
AS9205B
Gasket - Metal O-Ring, .125 Tube X .010 Wall, Cres Uns S32100
Nov 19, 2012
Reaffirmed
AS9207C
Screw, Machine - Steel, Diffused Nickel - Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675 195 Ksi Min, .1640-36 UNJF-3A
Jan 17, 2012
Stabilized
AS9208B
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675, 195 ksi min, .1900-32 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9209C
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14765, 195 Ksi Min, .2500-28 UNJF-3A
Jan 17, 2012
Stabilized
AS9210C
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675, 195 Ksi Min, .3125-24 UNJF-3A
Jan 17, 2012
Stabilized
AS9212B
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675, 195 ksi min, .4375-20 UNJF-3A
Jul 24, 2012
Revised
AS9216C
Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 Ksi Min, .1640-36 UNJF-3A
Jan 31, 2012
Stabilized
AS9217C
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 Ksi Min, .190-32 UNJF-3A
Feb 01, 2012
Stabilized
AS9218E
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 Ksi Min, .2500-28 UNJF-3A
Jan 31, 2012
Stabilized
AS9219D
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 ksi Min, .3125-24 UNJF-3A
Oct 15, 2012
Stabilized
AS9226
Wire - Steel, Corrosion and Heat Resistant, Safety, 1800Mdf
Oct 01, 2004
Issued
AS9228
Bracket, Angle, 90Md .190 Bolt
Jul 27, 2004
Reaffirmed
AS9230
Bracket, Angle, 90° .190 x .312 Bolt
Jun 27, 2007
Reaffirmed
AS9231
Bracket, Angle, 90Md .190 X .375 Bolt
Jul 27, 2004
Reaffirmed
AS9245A
Pin, Cotter - Cres, Ams 2711
Mar 24, 2004
Revised
AS9276A
Washer, Key - 180 Deg. Locking, Cres, UNS S32100
Jun 28, 2007
Reaffirmed
AS9283A
Bolt, Machine - Hexagon Head, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .1900-32 UNJF-3A
Jun 27, 2006
Revised
AS9284A
Bolt, Machine - Hexagon Head, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .2500-28 UNJF-3A
Jun 27, 2006
Revised
AS9285A
Bolt, Machine - Hexagon Head, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .3125-24 UNJF-3A
Jun 27, 2006
Revised
AS9286A
Bolt, Machine - Hexagon Head, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .3750-24 UNJF-3A
Jun 27, 2006
Revised
AS9292A
Screw, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .1380-40 UNJF-3A
Jul 06, 2006
Revised
AS9294A
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .1900-32 UNJF-3A
Jul 06, 2006
Revised
AS9296A
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .3125-24 UNJF-3A
Jul 06, 2006
Revised
AS9297A
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Black Oxide, Steel UNS G87400, 125 ksi min, .3750-24 UNJF-3A
Jul 06, 2006
Revised
AS92B
Cones, Front, Propeller Hub
May 11, 2006
Reaffirmed
AS9303B
Stud, Shouldered, Hexagon Wrenching, Steel UNS G87400, Cadmium Plated, 125 KSI Min, .1900-32 UNF-3A X .1900-32 UNF-3A
Feb 10, 2009
Revised
AS9304B
Stud, Shouldered, Stepped, Hex., Wrenching, Steel UNS G87400, Cadmium Plated, 125 KSI Min, .1900- 32 UNF-3A X .2500-28 UNF-3A
Feb 10, 2009
Revised
AS9305B
Stud, Shouldered, Hexagon Wrenching, Steel UNS G87400, Cadmium Plated, 125 KSI Min, .2500-28 UNF-3A X .2500-28 UNF-3A
Feb 10, 2009
Revised
AS9306B
Stud, Shouldered, Stepped, Hex., Wrenching, Steel UNS G87400, Cadmium Plated, 125 KSI Min, .2500- 28 UNF-3A X .3125-24 UNF-3A
Feb 10, 2009
Revised
AS9307B
Stud, Shouldered, Stepped, Hex., Wrenching, Steel UNS G87400, Cadmium Plated, 125 KSI Min, .2500- 28 UNF-3A X .3750-24 UNF-3A
Feb 10, 2009
Revised
AS9308A
Stud, Shouldered, Hex Wrenching, Drilled, Steel Uns G87400, Cad, Plated, 125 Ksi Min, .1900-32 Unf-3a X.1900-32 Unf-3a
Dec 29, 2004
Revised
AS9309A
Stud, Shouldered, Stepped, Hex Wrenching, Drilled, Steel Uns G87400, Cad, Plated, 125 Ksi Min, .1900-32 Unf-3a X .2500-28 Unf-3a
Dec 29, 2004
Revised
AS9310A
Stud, Shouldered, Hex Wrenching, Drilled, Steel Uns G87400, Cad, Plated, 125 Ksi Min, .2500-28 Unf-3a X .2500-28 Unf-3a
Dec 29, 2004
Revised
AS9311A
Stud, Shouldered, Stepped, Hex Wrenching, Drilled, Steel Uns G87400, Cad, Plated, 125 Ksi Min, .2500-28 Unf-3a X .3125-24 Unf-3a
Dec 29, 2004
Revised
AS9312A
Stud, Shouldered, Stepped, Hex Wrenching, Drilled, Steel Uns G87400, Cad, Plated, 125 Ksi Min, .2500-28 Unf-3a X .3750-24 Unf-3a
Dec 29, 2004
Revised
AS9316B
Screw, Machine - Hexagon Head, Slotted, Full Shank, Alloy Steel, UNS K14675, 135 ksi Min, .1900-32 UNS-3A
Aug 30, 2012
Revised
AS9317B
Screw, Machine - Hexagon Head, Slotted, Full Shank, Alloy Steel, Uns K14675, 135 Ksi Min, .2500-28 Uns-3a, Ni-Cad Plate
Sep 27, 2005
Revised
AS9318A
Rivet, Solid - 100° Flush Head, Monel UNS N04400
Nov 19, 2012
Reaffirmed
AS9319A
Rivet, Solid - Universal Head, Monel UNS N04400
Nov 19, 2012
Reaffirmed
AS9320B
Washer, Flat - AMS6350
Feb 02, 2012
Stabilized
AS9321
Washer, Flat - AMS 5510
Jun 27, 2007
Reaffirmed
AS9349A
Clamp, Loop, Cushioned, Joggled, Cres, .204 Hole
Aug 30, 2012
Revised
AS9353
Clamp, Loop - Aluminum, .204 Hole
Nov 19, 2012
Reaffirmed
AS9354
Clamp, Loop - Aluminum, .265 Hole
Nov 19, 2012
Reaffirmed
AS9356B
Nut, Plain, Hexagon, UNS S66286
Nov 19, 2012
Reaffirmed
AS9357A
Nut, Plain, Hexagon, Silver Plated, UNS S66286 130 ksi min
Jun 28, 2007
Reaffirmed
AS9358A
Nut, Plain, Castellated, Hexagon-UNS S66286, 130 ksi Min
Nov 19, 2012
Reaffirmed
AS9359A
Nut, Castellated, Hexagon, Silver Plated, Cres UNS S66286, 130 ksi min
Nov 19, 2012
Reaffirmed
AS9360B
Nut, Plain, Hexagon - Drilled, Silver Plated - UNS S66286, 130 ksi min
Jun 27, 2007
Reaffirmed
AS9361A
Nut, Plain, Hexagon, Check, UNS S66286, 130 ksi min
Jun 28, 2007
Reaffirmed
AS9362A
Nut, Plain, Hexagon, Check - UNS S66286, 130 ksi Min, Silver Plated
Nov 19, 2012
Reaffirmed
AS9363A
Nut, Slotted, Hexagon, Shear - UNS S66286, 130 ksi min
Nov 19, 2012
Reaffirmed
AS9364A
Nut, Slotted, Hexagon, Shear - Silver Plated, UNS S66286, 130 ksi min
Nov 19, 2012
Reaffirmed
AS9371B
Gasket - Metal O-Ring, .035 Tube X .006 Wall, Silver Plated, Cres - Uns S32100
Nov 19, 2012
Reaffirmed
AS9372B
Gasket - Metal O-Ring, .062 Tube X .006 Wall, Silver Plated Cres - Uns S32100
Nov 01, 2012
Reaffirmed
AS9373B
Gasket - Metal O-Ring, .062 Tube X .010 Wall Silver Plated Cres - Uns S32100
Nov 01, 2012
Reaffirmed
AS9374B
Gasket - Metal O-Ring, .094 Tube X .006 Wall, Silver Plated Cres - Uns S32100
Nov 01, 2012
Reaffirmed
AS9375B
Gasket - Metal O-Ring, .094 Tube X .010 Wall, Silver Plated Cres - Uns S32100
Nov 01, 2012
Reaffirmed
AS9376B
Gasket - Metal O-Ring, .125 Tube X .010 Wall, Silver Plated Cres - Uns S32100
Nov 01, 2012
Reaffirmed
AS9379
Plug, Expansion - AMS 5510
Nov 01, 2012
Reaffirmed
AS9380
Plug, Expansion - AMS 4003
Nov 01, 2012
Reaffirmed
AS9385
Packing, Performed, Ams 7267, O-Ring
Nov 01, 2012
Reaffirmed
AS9386
Packing, Preformed, Ams 7267, O-Ring
Nov 01, 2012
Reaffirmed
AS9389
Pin, Straight, Headless - AMS 5735, Lock
Nov 01, 2012
Reaffirmed
AS9390C
Pin, Straight, Headless, Dowel - CRES, UNS S66286, Standard and Oversize
Nov 07, 2011
Revised
AS9391
Clamp, Loop - Multiple Tube, Detachable Cushion, Ams 5510
Nov 01, 2012
Reaffirmed
AS9392
Cushion, Loop Clamp - Multiple, 3-Tube, AMS 3303
Nov 01, 2012
Reaffirmed
AS9393
Cushion, Loop Clamp - Multiple, 2-Tube, AMS 3303
Nov 01, 2012
Reaffirmed
AS9394
Strap, Retaining-Multiple Tube, Detachable Cushion, AMS 5510
Nov 01, 2012
Reaffirmed
AS9395
Backplate, Retaining Strap AMS 5510
Nov 01, 2012
Reaffirmed
AS9397A
Bolt, Tee Head - Cadmium Plated, Steel, UNS G87400, 125 ksi min, Chamfered, .1900-32 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9398B
Bolt, Tee Head, Chamfered - Cadmium Plated, Steel, UNS G87400, 125 ksi min, .2500-28 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9399A
Bolt, Tee Head - Cadmium Plated, Steel, UMS G87400, 125 ksi min, Chamfered, .3125-24 UNJF-3A
Jun 27, 2007
Reaffirmed
AS93E
Cones, Rear, Propeller Hub
Mar 12, 2013
Stabilized
AS9400A
Bolt, Tee Head - Cadmium Plated, Steel, UNS G87400, 125 ksi min, Chamfered, .3750-24 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9401A
Bolt, Tee Head - Cadmium Plated, Steel, Uns G87400, 125 Ksi Min, Chamfered, .4375-20 Unjf-3a
Jun 05, 2003
Revised
AS9402A
Bolt, Tee Head - Cadmium Plated, Steel, UNS G87400, 125 ksi min, Chamfered, .5000-20 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9403
Rivet, Solid - Universal Head, Ams 5737
Nov 01, 2012
Reaffirmed
AS9432B
Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .1900-32 UNJF-3A
Nov 01, 2012
Reaffirmed
AS9433B
Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .2500-28 UNJF-3A
Nov 01, 2012
Reaffirmed
AS9434B
Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .3125-24 UNJF-3A
Nov 01, 2012
Reaffirmed
AS9440A
Bolt, Machine-Hexagon, Drilled, 6 Holes, PD Shank, Nickel Cadmium Plated, Steel UNS K14675, 195 ksi min., 1900-32 UNJF-3A
Mar 29, 2006
Revised
AS9441A
Bolt, Machine - Hexagon, Drilled, 6 Holes, Pd Shank, Nickel Cadmium Plated, Steel Uns K14675, 195 Ksi Min,.2500-28 Unjf-3a
Mar 29, 2006
Revised
AS9442B
Bolt, Machine - Hexagon, Drilled, 6 Holes, PD Shank, Nickel Cadmium Plated, Steel UNS K14675, 195 ksi min, .3125-24 UNJF-3A
Oct 06, 2008
Revised
AS9444A
Bolt, Machine - Hexagon, Drilled, 6 Holes, Pd Shank, Nickel Cadmium Plated, Steel Uns K14675, 195 Ksi Min,.4375-20 Unfj-3a
Mar 29, 2006
Revised
AS9449B
Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head UNS K14675, 195 ksi Min, .1380-40 UNJF-3A
Jun 08, 2009
Revised
AS9450A
Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, UNS K14675, 195 ksi Min, .1640-36 UNJF-3A
May 02, 2006
Reaffirmed
AS9451B
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .1900-32 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9452B
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .2500-28 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9453B
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .3125-24 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9454B
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .3750-24 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9455B
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .4375-20 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9456B
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .5000-20 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9457B
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .5625-18 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9458B
Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, .6250-18 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9459A
Bolt, Machine - Steel, AMS 6304, Diffused Nickel-Cadmium Plated Hexagon Head, .750-16 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9460
Rivet, Solid - 100Md Flush Head, Ams 7235
Nov 01, 2012
Reaffirmed
AS9462A
Pin, Straight, Headed, .124 Diameter, Cres, UNS S66286
Nov 01, 2012
Reaffirmed
AS9463A
Pin, Straight, Headed, .186 Diameter, Cres, UNS S66286
Nov 01, 2012
Reaffirmed
AS9464C
Pin, Straight, Headed, .248 Diameter, Cres, Uns S66286
Nov 01, 2012
Reaffirmed
AS9465A
Pin, Straight, Headed, .311 Diameter, Cres, UNS S66286
Nov 01, 2012
Reaffirmed
AS9466A
Pin, Straight, Headed, .373 Diameter, Cres, UNS S66286
Nov 01, 2012
Reaffirmed
AS9467A
Pin, Straight, Headed, .436 Diameter, Cres, UNS S66286
Nov 01, 2012
Reaffirmed
AS9468
Pin, Straight, Headed .497 Diameter, Ams 5735
Nov 01, 2012
Reaffirmed
AS9482B
Washer, Flat - Steel AMS6437 or AMS6485, Diffused Nickel-Cadmium Plated, Countersunk
Feb 02, 2012
Stabilized
AS9486
Pin, Straight, Headless - Ams 5132, Lock
Nov 01, 2012
Reaffirmed
AS9489C
Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, UNS S66286, 130 KSI Min, .1900-32 UNJF-3A
Jan 31, 2012
Stabilized
AS9490A
Bolt, Machine-Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .250-28 Unjf-3a
Nov 01, 2012
Reaffirmed
AS9491A
Bolt, Machine-Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .3125-24 Unjf-3a
Nov 01, 2012
Reaffirmed
AS9492A
Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .375-24 Unjf-3a
Nov 01, 2012
Reaffirmed
AS9493A
Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .4375-20 Unjf-3a
Nov 01, 2012
Reaffirmed
AS9494A
Bolt, Machine-Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .500-20 Unjf-3a
Nov 01, 2012
Reaffirmed
AS9496A
Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .625-18 Unjf-3a
Nov 01, 2012
Reaffirmed
AS94C
Snap Ring, Non-Controllable Propeller Hub (UNS G87400)
Mar 12, 2013
Stabilized
AS9500A
Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, UNS S66286, 130 ksi min, .1900-32 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9501A
Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, UNS S66286, 130 ksi min, .2500-28 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9502A
Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, UNS S66286, 130 ksi min, .3125-24 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9503A
Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, UNS S66286, 130 ksi min, .3750-24 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9505A
Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Cres, UNS S66286, 130 ksi min, .5000-20 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9516A
Screw, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi Min, .1380-40 UNJF-3A
May 02, 2006
Reaffirmed
AS9517A
Screw, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi Min, .1640-36 UNJF-3A
May 02, 2006
Reaffirmed
AS9518B
Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .1900-32 UNJF-3A
Sep 24, 2007
Revised
AS9519B
Bolt, Machine - Hexagon Head, Steel, Cadmium Plated, UNS G87400, 125 ksi min, .2500-28 UNJF-3A
Jul 05, 2007
Revised
AS9520B
Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .3125-24 UNJF-3A
Sep 24, 2007
Revised
AS9521B
Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .3750-24 UNJF-3A
Sep 24, 2007
Revised
AS9522B
Bolt, Machine - Hexagon Head, Steel, Cadmium Plated, UNS G87400, 125 ksi min, .4375-20 UNJF-3A
Jul 05, 2007
Revised
AS9523B
Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .5000-20 UNJF-3A
Sep 24, 2007
Revised
AS9524B
Bolt, Machine - Hexagon Head, Steel, Cadmium Plated, UNS G87400, 125 ksi min, .5625-18 UNJF-3A
Sep 24, 2007
Revised
AS9525B
Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .6250-18 UNJF-3A
Sep 24, 2007
Revised
AS9526B
Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .7500-16 UNJF-3A
Sep 24, 2007
Revised
AS9527A
Screw, Machine Steel UNS G87400, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .1380-40 UNJF-3A
Sep 24, 2007
Revised
AS9528A
Screw, Machine Steel UNS G87400, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .1640-36 UNJF-3A
Sep 24, 2007
Revised
AS9529A
Bolt, Machine - Steel UNS G87400, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .1900-32 UNJF-3A
Sep 24, 2007
Revised
AS9530A
Bolt, Machine - Hexagon Head, Drilled 1 Hole, Cadmium Plated, Steel UNS G87400, 125 ksi min, .2500-28 UNJF-3A
Nov 20, 2007
Revised
AS9531A
Bolt, Machine - Hexagon Head, Drilled 1 Hole, Cadmium Plated, Steel UNS G87400, 125 ksi min, .3125-24 UNJF-3A
Nov 20, 2007
Revised
AS9532A
Bolt, Machine - Hexagon Head, Drilled 1 Hole, Cadmium Plated, Steel UNS G87400, 125 ksi min, .3750-24 UNJF-3A
Nov 20, 2007
Revised
AS9533A
Bolt, Machine - Hexagon Head, Drilled 1 Hole, Cadmium Plated, Steel UNS G87400, 125 ksi min, .4375-20 UNJF-3A
Nov 20, 2007
Revised
AS9534A
Bolt, Machine - Hexagon Head, Drilled 1 Hole, Cadmium Plated, Steel UNS G87400, 125 ksi min, .5000-20 UNJF-3A
Nov 29, 2007
Revised
AS9549
Washer, Flat - AMS 5510
Nov 01, 2012
Reaffirmed
AS9551A
Bracket, Flat, Steel, Uns G41300, Cadmium Plated
Dec 29, 2005
Revised
AS9552C
Bracket, Flat, Cres UNS S32100
Feb 01, 2011
Revised
AS9553B
Nut - Hexagon, Boss Connection, Cres - UNS S30400, 75 ksi
Jul 05, 2012
Revised
AS9554C
Screw, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1380-40 UNJF-3A
Oct 28, 2011
Revised
AS9555C
Screw, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, UTS 130 ksi min, .1640-36 UNJF-3A
Apr 11, 2012
Revised
AS9556C
Bolt, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1900-32 UNJF-3A
Jul 05, 2007
Revised
AS9557D
Bolt, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, UTS 130 ksi min, .2500-28 UNJF-3A
Apr 11, 2012
Revised
AS9558C
Bolt, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, UTS 130 ksi min, .3125-24 UNJF-3A
Apr 12, 2012
Revised
AS9559D
Bolt, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, UTS 130 ksi min, .3750-24 UNJF-3A
Jan 15, 2013
Revised
AS9564A
Screw, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres Uns S66286, 130 Ksi Min .1640-36 Unfj-3a
Nov 01, 2012
Reaffirmed
AS9565C
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres UNS S66286, 130 ksi Min .1900-32 UNJF-3A
Apr 09, 2007
Revised
AS9566A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres Uns S66286, 130 Ksi Min .2500-28 Unjf-3a
Nov 01, 2012
Reaffirmed
AS9567B
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, 130 Ksi Min, .3125-24 Unfj-3a
Nov 01, 2012
Reaffirmed
AS9568D
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres UNS S66286, 130 ksi min .3750-24 UNJF-3A
Nov 01, 2012
Reaffirmed
AS9572A
Screw, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1380-40 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9573A
Screw, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1640-36 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9574A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1900-32 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9575B
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .2500-28 UNJF-3A
Jul 05, 2007
Revised
AS9576B
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosioin and Heat Resistant Steel, UNS S66286, 130 ksi min, .3125-24 UNJF-3A
Jul 05, 2007
Revised
AS9577A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, UNS S66286, Silver Plated, .375-24 UNJF-3A
Jan 03, 2013
Revised
AS9579A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .5000-20 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9581A
Washer, Key - 90 Deg. Locking, Cres, UNS S32100
Jun 28, 2007
Reaffirmed
AS9582A
Washer, Key - 270 Deg. Locking, Cres, UNS S32100
Jun 28, 2007
Reaffirmed
AS9583A
Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .1900-32 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9584A
Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .2500-28 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9585A
Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .3125-24 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9586B
Bolt, Machine-Hexagon Drilled, 6 Holes, Full Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .3750-24 Unjf-3a
Nov 01, 2012
Reaffirmed
AS9587A
Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .4375-20 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9588A
Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .5000-20 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9589
Bolt, Machine-Hexagon Head, Drilled, 6 Holes, Full Shank, .5625-18 UNJF-3A
May 10, 2006
Reaffirmed
AS9592B
Bracket, Angle, 90°, Cres UNS S32100, .190 Bolt
Nov 01, 2012
Reaffirmed
AS9593B
Bracket, Angle, 90°, Cres UNS S32100, .190 X .250 Bolt
Nov 01, 2012
Reaffirmed
AS9594A
Bracket, Angle 90Md, Cres Uns S 32100,.190 X .312 Bolt
Nov 01, 2012
Reaffirmed
AS9595A
Bracket, Angle 90Md, Cres Uns S32100, .190 X .375 Bolt
Nov 01, 2012
Reaffirmed
AS9596A
Bracket, Angle, 90Md, Cadmium Plates, Steel Uns G41300, .190 Bolt
Dec 29, 2005
Revised
AS9597A
Bracket, Angle, 90Md, Cadmium Plated, Steel Uns G41300, .190 X .250 Bolt
Dec 29, 2005
Revised
AS9598A
Bracket, Angle, 90Md, Cadmium Plated, Alloy Steel Uns G41300, .190 X .312 Bolt
Mar 24, 2005
Revised
AS9599A
Bracket, Angle, 90Md, Cadmium Plated, Alloy Steel Uns G41300, .190 X .375 Bolt
Mar 24, 2005
Revised
AS9600A
Bracket, Angle, 90Md, Corrosion and Heat Resistant Steel Uns S41000, .190 Bolt
Nov 01, 2012
Reaffirmed
AS9601A
Bracket, Angle, 90Md, Cres Uns S41000, .190 X .250 Bolt
Nov 01, 2012
Reaffirmed
AS9602A
Bracket, Angle, 90Md, Cres Uns S41000, .190 X .312 Bolt
Nov 01, 2012
Reaffirmed
AS9603A
Bracket, Angle, 90Md, Cres Uns S41000, .190 X .375 Bolt
Nov 01, 2012
Reaffirmed
AS9631
Screw, Machine-Hexagon Head, Pd Shank, Titanium Ams 4967, .138-40 Unjf-3a
Nov 01, 2012
Reaffirmed
AS9633A
Bolt, Machine - Hexagon Head, PD Shank, Titanium AMS4967 (UNS R56400), .190-32 UNJF-3A
Aug 10, 2012
Revised
AS9638A
Bolt, Machine - Hexagon Head, PD Shank, Titanium AMS4967 (UNS R56400), .500-20 UNJF-3A
Jan 04, 2013
Revised
AS9676A
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cup Washer Locked, Cres, UNS S66286, 130 ksi min, .1900-32 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9677A
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cup Washer Locked, Cres, UNS S66286, 130 ksi min, .2500-28 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9678A
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cup Washer Locked, Cres, UNS S66286, 130 ksi min, .3125-24 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9679A
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cup Washer Locked, Cres, UNS S66286, 130 ksi min, .3750-24 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9680A
Bolt, Machine - Double Hex, Extended Washer Hd, Pd Shank, Cup Washer Locked, Cadmium Plated, Steel, Uns G87400, 125 Ksi Min, .1900-32 Unjf-3a
May 21, 2004
Revised
AS9681A
Bolt, Machine - Double Hex, Extended Washer Hd, Pd Shank, Cup Washer Locked, Cadmium Plated, Steel, Uns G87400, 125 Ksi Min, .2500-28 Unjf-3a
May 21, 2004
Revised
AS9685A
Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, Steel, UNS K14675, Diffused Nickel-Cadmium Plate, 195 ksi min, .1900-32 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9686A
Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, Steel, UNS K14675, Diffused Nickel-Cadmium Plate, 195 ksi min, .2500-28 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9687A
Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, Steel, UNS K14675, Diffused Nickel-Cadmium Plate, 195 ksi min, .3125-24 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9696E
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Corrosion and Heat Resistant Alloyl, UNS N07001, 165 ksi min, .1900-32 UNJF-3A
Sep 22, 2011
Revised
AS9697C
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Corrosion and Heat Resistant Steel, UNS N07001, 165 ksi min, .2500-28 UNJF-3A
Nov 01, 2012
Reaffirmed
AS9698B
Bolt, Machine - Double Hexagon, Extended Washer Head, PD Shank, Corrosion and Heat Resistant Steel, UNS N07001, 165 ksi min, .3125-24 UNJF-3A
Jul 05, 2007
Revised
AS9699A
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Corrosion and Heat Resistant Steel, UNS N07001, 165 ksi min, .3750-24 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9705C
BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, CORROSION AND HEAT RESISTANT NICKEL ALLOY, .1900-32 UNJF-3A
Feb 24, 2013
Revised
AS9712
Screw, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion & Heat Resistant Steel, .138-40 Unjf-3a
May 03, 2005
Reaffirmed
AS9714A
Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Nickel Alloy UNS N07001, .190-32 UNJF-3A
Oct 16, 2012
Revised
AS9715B
Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Nickel Alloyl, .2500-28 UNJF-3A
Aug 30, 2012
Revised
AS9716A
Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel, .3125-24 UNJF-3A
Jul 05, 2007
Revised
AS9724B
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Corrosion and Heat Resistant Steel, UNS N07001, .2500-28 UNJF-3A
Jun 28, 2007
Reaffirmed
AS9732A
Bolt, Machine-Double Hexagon Extended Washer Head, PD Shank, Cres AMS5643, .1900-32 UNJF-3A
Mar 01, 2012
Revised
AS9733A
Bolt, Machine-Double Hexagon, Extended Washer Head, PD Shank, Cres AMS 5643, .2500-28 UNJF-3A
Mar 02, 2012
Revised
AS9734A
Bolt, Machine-Double Hexagon, Extended Washer Head, PD Shank, Cres AMS5643, .3125-24 UNJF-3A
Mar 13, 2012
Revised
AS9741B
Bolt, Machine - Double Hexagon, Extended Washer Head, Drilled, Pd Shank, Cres Uns S17400, Ksi Min 1900-32 Unjf-3a
Nov 08, 2005
Revised
AS9742A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres UNS S17400, 140 ksi min .2500-28 UNJF-3A
Aug 18, 2005
Revised
AS9750A
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, AMS4967 (TI 6AL - 4V), .1900-32 UNJF-3A
Apr 01, 2013
Revised
AS9751
Bolt, Machine-Double Hexagon Extended Washer Head, Pd Shank, Titanium Ams 4967, .250-28 Unjf-3a
May 03, 2005
Reaffirmed
AS9759
Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium Ams 4967, .190-32 Unjf-3a
May 03, 2005
Reaffirmed
AS976
Coupling - Clamp, Groove V-Band, 6.400, 9.400, 11.400 Flange OD
Oct 10, 2006
Reaffirmed
AS9760
Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium Ams 4967, .250-28 Unjf-3a
May 03, 2005
Reaffirmed
AS9761
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Titanium Ams 4967, .3125-24 Unjf-3a
May 03, 2005
Reaffirmed
AS977
Coupling - Clamp, Groove V-Band, Forged, 6.400, 9.400, 11.400 Flange OD
Nov 01, 2012
Reaffirmed
AS9770
Packing, Preformed - Ams 3650, `O Ring
Nov 01, 2012
Reaffirmed
AS9771
Packing, Preformed - Ams 3650, Seal
Nov 01, 2012
Reaffirmed
AS9772
Packing, Preformed - Ams 3617, "O" Ring
Nov 01, 2012
Reaffirmed
AS9783
Bolt, Machine - Hexagon Head, Full Shank, Ams 5643, .190-32 Unjf-3a
May 03, 2005
Reaffirmed
AS9784
Bolt, Machine - Hexagon Head, Full Shank, Ams 5643, .250-28 Unjf-3a
May 03, 2005
Reaffirmed
AS9785
Bolt, Machine - Hexagon Head, Full Shank, Ams 5643, .3125-24 Unjf-3a
May 03, 2005
Reaffirmed
AS9786
Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .375-24 UNJF-3A
May 10, 2006
Reaffirmed
AS9788
Bolt, Machine - Hexagon Head, Full Shank, Ams 5643, .500-20 Unjf-3a
May 04, 2005
Reaffirmed
AS9790
Bolt, Machine - Hexagon Head, Full Shank, Ams 5643, .625-18 Unjf-3a
May 03, 2005
Reaffirmed
AS9796
Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Ams 5643, .3125-24 Unfj-3a
May 03, 2005
Reaffirmed
AS9805
Bolt, Machine-Hexagon Head, PD Shank, AMS 5643, .190-32 UNJF-3A
Jun 26, 2007
Reaffirmed
AS9806
Bolt, Machine - Hexagon Head, PD Shank, AMS 5643, .250-28 UNJF-3A
Jun 26, 2007
Reaffirmed
AS9808
Bolt, Machine-Hexagon Head, PD Shank, AMS 5643, .375-24 UNJF-3A
Jun 26, 2007
Reaffirmed
AS9816
Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, AMS 5643, .190-32 UNJF-3A
Jun 26, 2007
Reaffirmed
AS9821
Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, AMS 5643, .500-20 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9841
Key, Woodruff - Chamfered Cres Ams 5640
Nov 01, 2012
Reaffirmed
AS9842A
Pin, Straight, Headed, .0937 Diameter, Uns S41800
Sep 30, 2004
Revised
AS9843A
Pin, Straight, Headed, .1249 Diameter, Uns S41800
Nov 01, 2012
Reaffirmed
AS9844A
Pin, Straight, Headed, .1874 Diameter, Uns S41800
Nov 01, 2012
Reaffirmed
AS9845A
Pin, Straight, Headed, .2499 Diameter, Uns S41800
Nov 01, 2012
Reaffirmed
AS9846A
Pin, Straight, Headed, .3124 Diameter, Uns S41800
Nov 01, 2012
Reaffirmed
AS9847A
Pin, Straight, Headed, .3749 Diameter, Uns S41800
Nov 01, 2012
Reaffirmed
AS9848A
Pin, Straight, Headed, .4999 Diameter, Uns S41800
Nov 01, 2012
Reaffirmed
AS9880
Washer, Cup, Lock - Cres Ams 5510
Nov 01, 2012
Reaffirmed
AS9881A
Nut, Plain, Hexagon, Cadmium Plated, UNS G87400, 125 ksi Min
May 02, 2006
Reaffirmed
AS9882A
Nut, Plain, Hexagon - Drilled, Cadmium Plated - UNS G87400, 125 ksi Min
May 02, 2006
Reaffirmed
AS9885A
Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Corrosion and Heat Resistant Steel, Uns S41800, 140 Ksi Min, .1900-32 Unjf-3a
Nov 01, 2012
Reaffirmed
AS9887A
Bolt, Machine-Double Hexagon Extended Washer Head, PD shank AMS 5616, .3125-24 UNJF-3A
Nov 19, 2012
Reaffirmed
AS9890A
Bolt, Machine - Double Hexagon Extended Washer Head, Cres UNS S41800, .5000-20 UNJF-3A
Jul 05, 2007
Revised
AS9894
Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Ams 5616, .190-32 Unjf-3a
May 03, 2005
Reaffirmed
AS9895A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, AMS 5616, .2500-28 UNJF-3A
Oct 02, 2007
Revised
AS9902D
Plug, Machine Thread Drilled, Preformed Packing, AS8879 Thread (UNS S34700)
Jul 19, 2010
Revised
AS9914B
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Steel AMS6322, Cadmium Plated, .190-32 UNJF-3A
Oct 15, 2012
Stabilized
AS9916A
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Steel AMS6322, Cadmium Plated, .3125-24 UNJF-3A
Jul 24, 2012
Revised
AS9917A
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL AMS6322, CADMIUM PLATED, .3750-24 UNJF-3A
Apr 02, 2013
Revised
AS9918
Bolt, Machine-Double Hexagon Extended Washer Head, Pd Shank, Steel Ams 6322, Cadmium Plated, .4375-20 Unjf-3a
May 03, 2005
Reaffirmed
AS9923A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cadmium Plated, Steel, UNS G87400, 125 ksi min, .1900-32 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9924A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cadmium Plated, Steel, UNS G87400, 125 ksi min, .2500-28 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9928A
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cadmium Plated, Steel, UNS G87400, 125 ksi min, .5000-20 UNJF-3A
Jun 27, 2007
Reaffirmed
AS9933B
Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS6322, Cadmium Plated, .250-28 UNJF-3A
Oct 15, 2012
Stabilized
AS9944A
Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Full Shank, Steel AMS6322, Cadmium Plated, .3750-24 UNJF-3A
Aug 30, 2012
Revised
AS9947A
Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS6322, Cadmium Plated, .5625-18 UNJF-3A
Mar 12, 2013
Revised
AS9955
Packing, Preformed - AMS 3668, "O" Ring
Nov 19, 2012
Reaffirmed
AS9956A
Packing, Preformed (PTFE) - AMS3668, Seal
Nov 19, 2012
Reaffirmed
AS9958
Bolt, Machine, Hexagon Head, Drilled, 6 Hold, Pd Shank, Steel Ams 6322, Cadmium Plated, .250-28 Unjf-3a
May 04, 2005
Reaffirmed
AS9964A
BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL AMS6322, CADMIUM PLATED, .625-18 UNJF-3A
Apr 22, 2013
Revised
AS9966
Packing, Preformed - AMS 7273, Seal
Nov 19, 2012
Reaffirmed
AS9967
Packing, Preformed - AMS 7273, "O" Ring
Nov 19, 2012
Reaffirmed
MA1370
Screw Threads - MJ Profile, Metric
Nov 19, 2012
Reaffirmed
MA1421
Aerospace Selected Diameter-Pitch Combinations of Metric 60° Screw Threads for Shaft or Bearing Retaining Screw Threads
Nov 19, 2012
Reaffirmed
MA1508
Undercuts for Straight Screw Threads - Metric
Nov 19, 2012
Reaffirmed
MA1518B
Bolts, Screws and Nuts - External Wrenching, Metric Threads - Design Parameters For
Nov 19, 2012
Reaffirmed
MA1520A
Areas for Calculating Stress or Load Values for Metric MJ Externally Threaded Fasteners
Nov 19, 2012
Reaffirmed
MA1549
Wrenching Configuration, 12 Spline, For Metric Threaded Fasteners
Nov 19, 2012
Reaffirmed
MA1565B
Inserts, Screw Thread, Helical Coil Metric Series, Procurement Specification for
Mar 11, 2009
Revised
MA1566A
Gaging Practice and Gage Requirements for MJ Metric Screw Threads
Nov 19, 2012
Reaffirmed
MA1567B
Insert, Screw Thread, Helical Coil, Metric Series, Standard Assembly Dimensions For
Nov 08, 2012
Reaffirmed
MA1568
Nut, Self Locking - UNS S66286, 425 °C and 650 °C, 1100 MPa, MJ Thread, Procurement Specification For, Metric
Nov 08, 2012
Reaffirmed
MA1573A
Nut, Self-Locking, Steel, Class 1100 Mpa/235 °C, MJ Thread Procurement Specification For, Metric
Oct 18, 2011
Revised
MA1696A
Screw Threads, Metric Buttress - MJB Profile
Nov 08, 2012
Reaffirmed
MA1759A
Center Hole, Metric
Nov 08, 2012
Reaffirmed
MA1784
Spacers and Washers, Procurement Specification For, Metric
Nov 08, 2012
Reaffirmed
MA1806
Spring Clips and Cushion Selection for Metal Tube Support, Metric
Nov 08, 2012
Reaffirmed
MA1937
Nut, Hex, Free Running, Procurement Specification For, Metric
Nov 08, 2012
Reaffirmed
MA1943A
Nuts, Self-Locking, UNS N07001, 730 °C, 1100 MPa and 1210 MPa, Procurement Specification For, Metric
Nov 08, 2012
Reaffirmed
MA2010
Packing, Preformed - O-Ring Seal, Standard Sizes and Size Codes, Metric
Nov 08, 2012
Reaffirmed
MA2039A
Plug, Port - MJ Thread, O-Ring Seal, AMS-5640, Metric
Nov 08, 2012
Reaffirmed
MA2093
Fitting End, Dimensions, Fluid Systems Port Connection, Metric
Nov 08, 2012
Reaffirmed
MA2515
Ring - Back-Up, Port Connection, AMS 3660, Metric
Nov 08, 2012
Reaffirmed
MA2520
Nut - Hex, Back-Up Ring, Port Fitting Connector, AMS 5639, MJ Thread, Metric
Nov 08, 2012
Reaffirmed
MA2521
Nut - Hex, Port Fitting Connector, AMS 5639, MJ Thread, Metric
Nov 08, 2012
Reaffirmed
MA2532
Adapter - Port to Tube, 60 Deg Cone Coupling, AMS 5639, MJ Thread, Metric
Nov 08, 2012
Reaffirmed
MA2536
Gasket, Metal C-Ring, Face Seal, Internal Pressure, UNS N07750, Silver Plated, Metric
Nov 08, 2012
Reaffirmed
MA2537
Groove Design, Metal C-Ring Gasket, Face Type, Internal Pressure, Metric
Nov 08, 2012
Reaffirmed
MA2538
Gasket, Metal C-Ring Seal Nickel Alloy, Corrosion and Heat Resistant, Metric Procurement Specification For
Jul 23, 2004
Reaffirmed
MA3259A
Pin, Cotter - Cres, UNS S32100, AS7211, Metric Series
Nov 08, 2012
Reaffirmed
MA3265
Washer - Flat Load Spreading, Metric, AMS 5525
Nov 08, 2012
Reaffirmed
MA3266
Nut, Self-Locking - Spline Drive, Extended Washer UNS S66286, Silver Plate, MJ Thread, Metric
Nov 08, 2012
Reaffirmed
MA3274
Nut - Self-Locking, Clinch, Serrated Shank, 400 °C, Dry Film Coated, UNS S66286, MJ Thread, Metric
Nov 08, 2012
Reaffirmed
MA3275
Nut - Self-Locking, Clinch, Serrated Shank, 650 °C, Silver Plated, UNS S66286, MJ Thread, Metric
Dec 10, 2012
Reaffirmed
MA3279B
Insert, Screw Thread, Helical Coil, Metric Series, Free Running, CRES, Uncoated
Dec 10, 2012
Reaffirmed
MA3280B
Insert, Screw Thread, Helical Coil, Metric Series, Free Running, CRES, Dry Film Lubricated
Dec 10, 2012
Reaffirmed
MA3281B
Insert, Screw Thread, Helical Coil, Metric Series, Free Running, Cres, Cadmium Plated
May 02, 2006
Reaffirmed
MA3286B
Bolt, Machine - Hexagon Head, PD Shank, MJ Thread, Corrosion and Heat Resistant Steel, UNS S66286, 90 MPa Min, Metric
Dec 10, 2012
Reaffirmed
MA3287
Bolt, Machine - Spline Extended Washer, PD Shank Long Thread, AMS5731, Metric
Dec 10, 2012
Reaffirmed
MA3288
Nut, Plain Hex - UNS S66286, MJ Thread, Metric
Dec 10, 2012
Reaffirmed
MA3289B
Bolt, Machine-Hex Head-PD Shank MJ Thread, AMS6322, Cadmium Plate, Metric
Jun 29, 2009
Revised
MA3294
Clip - Spring, Tension, Outer 5.5 mm Bolt Hole, AMS 5525, Metric
Dec 10, 2012
Reaffirmed
MA3295
Clip - Spring, Tension, Inner 5.5 mm Bolt Hole, AMS 5525, Metric
Dec 10, 2012
Reaffirmed
MA3296
Cushion - Tube Clamp Support, PTFE, Metric
Dec 10, 2012
Reaffirmed
MA3302B
Nut, Plain Hex - UNS G87400, Cadmium Plate, MJ Thread, Metric
Aug 02, 2010
Revised
MA3304B
BOLT-MACHINE, HEX HEAD, DRILLED, PD SHANK, MJ THREAD, AMS 6322, CADMIUM PLATE, METRIC
Mar 18, 2013
Stabilized
MA3329C
Insert, Screw Thread, Helical Coil, Metric Series, Screw Locking, CRES, Uncoated
Dec 10, 2012
Reaffirmed
MA3330C
Insert, Screw Thread, Helical Coil, Metric Series, Screw Locking, CRES, Dry Film Lubricated
Dec 10, 2012
Reaffirmed
MA3331C
Insert, Screw Thread, Helical Coil, Metric Series, Screw Locking, CRES, Cadmium Plated
Dec 10, 2012
Reaffirmed
MA3338
Bolt, Machine-Hex Head, Pd Shank, Long Thread, Ams 5662, Metric
Jul 23, 2004
Reaffirmed
MA3339B
Bolt, Machine-Spline Extended Washer, PD Shank, Long Thread, AMS6322, Cadmium Plated, Metric
Jun 29, 2009
Revised
MA3340B
Bolt, Machine-Spline Extended Washer, PD Shank, Long Thread, AMS 5662, Metric
Aug 14, 2006
Reaffirmed
MA3341
Bolt, Machine-Spline Extended Washer, Full Shank, Long Thread, AMS 5731, Metric
Aug 14, 2006
Reaffirmed
MA3342
Bolt, Machine-Spline Extended Washer, Full Shank, Drilled, Long Thread, AMS5731, Metric
May 02, 2006
Reaffirmed
MA3343
Bolt, Machine - Spline Drive Extended Washer, Full Shank, Long Thread, AMS 5662, Metric
May 02, 2006
Reaffirmed
MA3344
Nut, Plain Hex - Thin, UNS S66286, MJ Thread, Metric
Dec 10, 2012
Reaffirmed
MA3347
Bolt, Machine-Hex Head-Full Shank, Long Thread, AMS 5731, Metric
May 02, 2006
Reaffirmed
MA3348
Bolt, Spline Drive Extended Washer Head, PD Shank, Long Thread, AMS 5708, Metric
May 02, 2006
Reaffirmed
MA3349
Nut, Self Locking - Reduced Hex Drive, UNS S66286, Silver Plate, MJ Thread, Metric
Dec 10, 2012
Reaffirmed
MA3350
Nut, Castellated, Hex - UNS S66286, MJ Thread, Metric
Dec 10, 2012
Reaffirmed
MA3351
Nut, Spline Drive - Extended Washer, Cupwasher Lock, Uns S66286, Silver Plate, Mj Thread, Metric
Jul 30, 2004
Reaffirmed
MA3352
Packing, Preformed - O-Ring Seal, AMS 7276, Metric
Dec 10, 2012
Reaffirmed
MA3353B
Nut, Self Locking - Spline Drive, Extended Washer, UNS G87400, Cadmium Plate, MJ Thread, Metric
Aug 03, 2010
Revised
MA3354B
Nut, Plain Hex - Thin, UNS G87400, Cadmium Plate, MJ Thread, Metric
Aug 03, 2010
Revised
MA3365
Bolt, Machine - Hex Head, Drilled, Full Shank, Long Thread, AMS 5731, Metric
May 02, 2006
Reaffirmed
MA3366
Bolt, Machine - Spline Drive Extended Washer, Drilled Head, Full Shank, Long Thread, AMS 5662, Metric
May 02, 2006
Reaffirmed
MA3367B
Bolt, Machine-Spline Drive Head, Drilled, PD Shank-Long Thread, AMS6322, Cadmium Plated, Metric
Jun 29, 2009
Revised
MA3368
Bolt, Machine-Spline Extended Washer, PD Shank, Long Thread, Drilled, AMS5662, Metric
May 02, 2006
Reaffirmed
MA3369
Bolt, Machine-Hex Head, Drilled, PD Shank, Long Thread, AMS 5662, Metric
May 02, 2006
Reaffirmed
MA3371
Bolt, Spline Drive Extended Washer Head, Drilled, PD Shank, Long Thread, AMS 5708, Metric
May 02, 2006
Reaffirmed
MA3374C
Bolts and Screws, UNS S66286, Corrosion and Heat Resistant Steel, Procurement Specification, Metric
Aug 30, 2012
Revised
MA3375C
Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specification, Metric
Aug 08, 2011
Revised
MA3376B
Bolts and Screws, UNS G87400 Tensile Strength 860 MPa and 1000 MPa Procurement Specification, Metric
Dec 10, 2012
Reaffirmed
MA3377B
Bolts and Screws, Nickel Alloy UNS N07718, Tensile Strength 1275 MPa Procurement Specification, Metric
Dec 10, 2012
Reaffirmed
MA3378C
Bolts and Screws, UNS N07001, Tensile Strength 1210 MPa, Thread and Fillet Radius Rolled Before Aging, Procurement Specification, Metric
Dec 10, 2012
Reaffirmed
MA3379
Stud, Straight, 2.5 Dia Engagement, A286, Mj Metric, 6 X 1 - 6 X 1
Jul 23, 2004
Reaffirmed
MA3380
Stud, Straight, 2.5 Dia Engagement, A286, Mj Metric, 7 X 1 - 7 X 1
Jul 23, 2004
Reaffirmed
MA3381
Stud, Straight - 2.5 Dia Engagement, A286, MJ Metric, 8 X 1 - 8 X 1
May 05, 2006
Reaffirmed
MA3382
Stud, Straight, 2.5 Dia Engagement, A286, Mj Metric, 10 X 1.25 - 10 X 1.25
Jul 23, 2004
Reaffirmed
MA3383
Stud, Stepped, 1.5 Dia Engagement, A286, Mj Metric, 6 X 1 - 5 X 0.8
Jul 23, 2004
Reaffirmed
MA3384
Stud, Stepped, 1.5 Dia Engagement, A286, Mj Metric, 7 X 1 - 6 X 1
Jul 23, 2004
Reaffirmed
MA3385
Stud, Stepped, 1.5 Dia Engagement, A286, Mj Metric, 8 X 1 - 7 X 1
Jul 23, 2004
Reaffirmed
MA3386
Stud, Stepped, 1.5 Dia Engagement, A286, Mj Metric, 10 X 1.25 - 8 X
Jul 23, 2004
Reaffirmed
MA3387
Stud, Stepped, 1.5 Dia Engagement, A286, Mj Metric, 12 X 1.25 - 10 X 1.25
Jul 23, 2004
Reaffirmed
MA3388
Stud, Stepped, 2.0 Dia Engagement, A286, Mj Metric, 6 X 1 - 5 X 0.8
Jul 23, 2004
Reaffirmed
MA3389
Stud, Stepped, 2.0 Dia Engagement, A286, Mj Metric, 7 X 1 - 6 X 1
Jul 23, 2004
Reaffirmed
MA3390
Stud, Stepped, 2.0 Dia Engagement, A286, Mj Metric, 8 X 1 - 7 X 1
Jul 23, 2004
Reaffirmed
MA3391
Stud, Stepped, 2.0 Dia Engagement, A286, Mj Metric, 10 X 1.25 - 8 X
Jul 23, 2004
Reaffirmed
MA3392
Stud, Stepped, 2.0 Dia Engagement, A286, Mj Metric, 12 X 1.25 - 10 X 1.25
Jul 23, 2004
Reaffirmed
MA3393
Clip - Spring, Tension, Outer 6.7 mm Bolt Hole, AMS 5525, Metric
May 05, 2006
Reaffirmed
MA3394
Clip - Spring, Tension, Inner 6.7 mm Bolt Hole, AMS 5525, Metric
May 09, 2006
Reaffirmed
MA3398
Bolt, Machine-Hex Head-Drilled, PD Shank, Long Thread, AMS5731, Metric
May 05, 2006
Reaffirmed
MA3399
Clamp - Tube Support, Spring Clips and PTFE Cushion, Procurement Specification For
Dec 10, 2012
Reaffirmed
MA3421B
NUT, PLAIN HEX - DRLD, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
Mar 18, 2013
Stabilized
MA3422
Nut, Plain Hex-UNS S66286, Silver Plate, MJ Thread, Metric
May 05, 2006
Reaffirmed
MA3423
Nut, Plain Hex-Drld, UNS S66286, Silver Plate, MJ Thread, Metric
May 05, 2006
Reaffirmed
MA3424
Nut, Plain Hex-Thin, UNS S66286, Silver Plate, MJ Thread, Metric
May 05, 2006
Reaffirmed
MA3425B
NUT, CASTELLATED, HEX - UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
Mar 18, 2013
Stabilized
MA3426
Nut, Castellated, Hex-UNS S66286, Silver Plate, MJ Thread, Metric
May 10, 2006
Reaffirmed
MA3427A
Nut, Castellated, Hex - Thin, UNS G87400, Cadmium Plate, MJ Thread, Metric
Oct 11, 2007
Revised
MA3428
Nut, Castellated, Hex-Thin, UNS S66286, Silver Plate, MJ Thread, Metric
May 10, 2006
Reaffirmed
MA3429
Nut, Self Locking, Spline Drive, Extended Washer, UNS N07001, Silver Plate, MJ Thread, Metric
May 10, 2006
Reaffirmed
MA3430A
Nut, Self Locking-Reduced Hex Drive, AMS 6322, Cadmium Plated, MJ Thread, Metric
Sep 06, 2007
Revised
MA3433
Nut, Self Locking - Shank UNS N07001, Silver Plate, MJ Thread, Metric
May 05, 2006
Reaffirmed
MA3434
Packing, Preformed - O-Ring Seal, AMS 7273, Metric
Dec 10, 2012
Reaffirmed
MA3437
Spacer, Sleeve - for 5 mm Bolt, AMS4901 or AMS4921, Metric
Dec 10, 2012
Reaffirmed
MA3438
Spacer, Sleeve - for 6 mm Bolt, AMS4901 or AMS4921, Metric
Dec 10, 2012
Reaffirmed
MA3441
Washer-Key, Cup Lock, AMS5510, Metric
Dec 10, 2012
Reaffirmed
MA3442
Packing, Preformed - O-Ring Seal, AMS 7267, Metric
Dec 10, 2012
Reaffirmed
MA3444
Nut, Self Locking - Spline Drive, Captive Washer, UNS S66286, Silver Plate, MJ Thread, Metric
May 10, 2006
Reaffirmed
MA3445
Packing, Preformed O-Ring Seal, Fluorocarbon (MIL-R-83485, Type I), Metric
Dec 10, 2012
Reaffirmed
MA3446A
Bolt, Machine - Tee Head, Chamfered, Classification: 1210 Mpa/730 °C Close Tol Shank, UNS N07001, Metric
Jul 27, 2006
Reaffirmed
MA3447
Bolt, Machine - Spline Drive HD, Close Tol Full Shank, AMS 5662, Metric
Aug 14, 2006
Reaffirmed
MA3448
Bolt, Spline Drive Special Extended Washer Head, Reduced Head, PD Shank, AMS 5708, Metric
Aug 14, 2006
Reaffirmed
MA3449
Bolt, Spline Drive Extended Washer Head, Reduced Head, Retainer Locked, PD Shank, AMS 5708, Metric
Aug 14, 2006
Reaffirmed
MA3450
Retainer, Nut and Bolt, Cup Lock, 5 mm and 6 mm, AMS 5510, Metric
Dec 10, 2012
Reaffirmed
MA3453
Washer, Flat, AMS-5525, Metric
Dec 10, 2012
Reaffirmed
MA3454A
Cover - Engine Accessory Drive, Square, 127.28 BC, Metric, AMS4424 (UNS M11630) or AMS4484
Oct 03, 2012
Revised
MA3471
Gasket - Engine Accessory Drive, Square, 127.28 BC, Metric
Dec 10, 2012
Reaffirmed
MA3476
Bolt, Machine - Spline Extended Washer, Full Head, PD Shank, Long Thread, AMS 5662 - Metric
Oct 10, 2006
Reaffirmed
MA3512
Bolt, Machine - Spline Drive Hd, Close Tol Full Shank, Uns N07001, Metric
Jul 23, 2004
Reaffirmed
MA3513
Bolt, Machine - Spline Drive Extended Washer Head, Pd Shank, Long Thread, Uns N07001, Metric
Jul 23, 2004
Reaffirmed
MA3520
Insert - Thin Wall, Short Self-Locking, 550 °C, Silver Plated UNS N07718, MJ Thread, Metric
May 10, 2006
Reaffirmed
MA3521
Insert - Thin Wall, Long Self-Locking, 550 °C, Silver Plated UNS N07718, MJ Thread, Metric
May 10, 2006
Reaffirmed
MA3574
Rivet-Solid, Universal Head, AS7232 Corrosion and Heat Resistant Nickel Alloy, Metric
Dec 10, 2012
Reaffirmed
MA4016
Ring, Retaining - External, Spiral Wound, Heavy and Medium Duty CRES, Metric
Dec 10, 2012
Reaffirmed
MA4017
Ring, Retaining - Internal, Spiral Wound, Heavy and Medium Duty CRES, Metric
Dec 10, 2012
Reaffirmed
MA4018
Pin, Straight, Headless, AMS 5688, Metric
Dec 10, 2012
Reaffirmed
MA4019
Pin, Straight, Headless, AMS 5732, Metric
Dec 10, 2012
Reaffirmed
MA4020
Ring, Retaining, External, Tapered, Type I, Class 2, AMS 5520, Metric
Dec 10, 2012
Reaffirmed
MA4021
Ring, Retaining - Internal, Tapered, Type I, Class 1, AMS 5520, Metric
Dec 10, 2012
Reaffirmed
MA4029
Ring, Retaining - Internal, Beveled, Tapered, Type II, Class 1, AMS 5520, Metric
Dec 10, 2012
Reaffirmed
MA4030
Ring, Retaining - External, Reinforced E-Ring, Type I, Class 3, AMS 5520, Metric
Dec 10, 2012
Reaffirmed
MA4035
Rings, Retaining - Spiral Wound, Uniform Section Corrosion Resistant, Procurement Specification For, Metric
Dec 10, 2012
Reaffirmed
MA4036
Rings, Retaining - Tapered Width, Uniform Thickness Corrosion Resistant, Procurement Specification For, Metric
Dec 10, 2012
Reaffirmed
MA4037A
Washer, Key - 90° Locking, CRES, UNS S32100, Metric
Dec 10, 2012
Reaffirmed
MA4038B
Washer, Key - 180° Locking, CRES, UNS S32100, Metric
Dec 10, 2012
Reaffirmed
MA4039A
Washer, Key - 270° Locking, CRES, UNS S32100, Metric
Dec 10, 2012
Reaffirmed
MA4040A
Washer, Key - Dual Locking Positions, CRES, UNS S32100, Metric
Dec 10, 2012
Reaffirmed
MA4044
Nut, Spanner - End Slots, Cupwasher Locked, UNS S66286, Silver Plated, MJ Thread, Metric
Dec 10, 2012
Reaffirmed
MA4045
Washer, Cup, Lock - Spanner Nut, AMS 5646, Metric
Dec 10, 2012
Reaffirmed
MA4070
Pins, Procurement Specification For, Metric
Jul 23, 2004
Reaffirmed
MA4147
Bolt, Spline Drive Extended Washer, Reduced Shank, Ams 5662, Metric
Jul 23, 2004
Reaffirmed
MA4177
Nut, Self Locking - Hex Extended Washer UNS N07001, Silver Plate, MJ Thd, Metric
May 03, 2006
Reaffirmed
MA4187
Bolt, Machine, Spline Drive, Special Extended Washer, Reduced Head, Pd Shank, Ams 5662, Metric
Jul 23, 2004
Reaffirmed
MA4189
Screw, Machine 100 Degree Csk, Flat Head, Offset Cruciform Recess, Full Shank, Uns S66286, Mj Thread, Metric
Jul 23, 2004
Reaffirmed
MA4284
Areas for Calculating Stress or Load Values for Metric MJ Internally Threaded Fasteners
Dec 10, 2012
Reaffirmed
MA4368
Nut, Plain, Round - Spanner Wrenching, Shaft Mounted, UNS S66286, Procurement Specification For, Metric
Dec 10, 2012
Reaffirmed
MA4811
Insert - Thin Wall, Self-Locking, Metric, Short and Long Length, Installation and Removal Of
Dec 10, 2012
Reaffirmed
MA4812
Insert - Thin Wall, Metric, Short and Long, Hole Preparation For
Dec 10, 2012
Reaffirmed
MA7211A
Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100, Metric Procurement Specification For
Dec 10, 2012
Reaffirmed
MAP1670
Studs, Installation Practice for Interference Fit - Metric
May 09, 2006
Reaffirmed
MAP1753A
Hole Sizes, Recommended for Metric Fasteners on Propulsion Equipment
Dec 10, 2012
Reaffirmed
MAP3439
O-Ring Groove Design for Packing Preformed, Elastomeric O-Ring Seals, Static, Axial Compression, Metric
Dec 10, 2012
Reaffirmed
MAP3440
O-Ring Groove Design for Packing Preformed, Elastomeric O-Ring Seals, Static, Radial Squeeze, Metric
Dec 10, 2012
Reaffirmed
USCAR40
Lead Free Solder Validation Test Plan
Apr 01, 2011
