SAE Standards Works
AMS G9 Aerospace Sealing Committee
AMS3265E - Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Nonchromated Corrosion Inhibiting for Intermittent Use to 360°F (182°C)
Not available for purchase at this time.
Stephen Gregory Bialecki
Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Nonchromated Corrosion Inhibiting for Intermittent Use to 360°F (182°C)
This specification covers a polysulfide (T) rubber sealing compound with nonchromated corrosion inhibitors supplied as a two-component system which cures at room temperature.<p>This product has been used typically for contact with air pressures, fuels and water, but usage is not limited to such applications. Each application should be considered separately. Polysulfide (T) rubber has a service temperature range of -65 to +250 degrees F (-54 to +121 degrees C), with short term recurring exposures (approximately 6 hours) to 360 degrees F (182 degrees C). It can be used for aerodynamic smoothing, cabin pressure and fillet sealing and fastener overcoating.
Five Year Review. The document is listed on the Agenda.
. All rights reserved.
Intellectual Property Policy
Terms & Conditions