SAE International
SAE Standards Works
SAE International
Contact Us | Help | Shopping Cart
SAE Login

AMS3345F - Silicone Rubber, 1000 Psi (6.90 Mpa) Tensile Strength, 45-55

Not available for purchase at this time.
Document Number: AMS3345F
Project Initiation: 09-27-2007
Project Number:
Revision Number: F
Sponsor Name: Manuel Koucouthakis
Silicone Rubber, 1000 Psi (6.90 Mpa) Tensile Strength, 45-55
This specification covers a silicone rubber in the form of sheet, strip, tubing, molded shapes, and extrusions. These products have been used typically for parts required to operate or seal from -90 to +205 degrees C (-130 to +400 degrees F), compounded especially for high strength, but usage is not limited to such applications. Silicone elastomer is resistant to deterioration by weathering and aircraft piston engine oil and remains flexible over the temperature range noted. This rubber is not normally suitable for use in contact with gasoline or aromatic fuels and low-aniline-point petroleum-base fluids due to excessive swelling of the elastomer.
5 year review
Recent Activity