SAE Standards Works
AMS D Nonferrous Alloys Committee
AMS4150M - Aluminum Alloy, Extrusions and Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6) Solution and Precipitation Heat Treated
New Project Request
Not available for purchase at this time.
Aluminum Alloy, Extrusions and Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6) Solution and Precipitation Heat Treated
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing, flash welded rings fabricated from extruded stock, and stock for flash welded rings.<p>These products have been used typically for parts requiring moderate strength, especially where such parts require brazing or welding during fabrication, but usage is not limited to such applications.
AMS4150M has been revised to add billet types for tubing (1.1.1) to permit the replacement of AMS-QQ-A-200/8 Temper T6 material, provides for press solution heat treatment (3.2.2), adds provisions for ultrasonic inspection, when specified (3.4.1), and revises Classification of Tests (4.2), Sampling and Testing (4.3.1) and Reports (4.4).
. All rights reserved.
Intellectual Property Policy
Terms & Conditions