SAE Standards Works
Dummy Testing and Equipment Committee
J2876 - Low Speed Knee Slider Test Procedure for the Hybrid III 50th Male Dummy
Not available for purchase at this time.
Low Speed Knee Slider Test Procedure for the Hybrid III 50th Male Dummy
This procedure establishes a recommended practice for performing a Low Speed Knee Slider test to the Hybrid III 50th Male Anthropomorphic Test Device (ATD or crash dummy). This test was created to satisfy the demand from industry to have a certification test which produces similar results to an actual low energy automotive impact test. An inherent problem exists with the current certification procedure because the normal (2.75 m/s) knee slider test has test corridors that do not represent typical displacements seen in these low energy impact tests. The normal test corridors specify a force requirement at 10 mm and at 18 mm, while the low speed test needs to have a peak displacement around 10 mm.
. All rights reserved.
Intellectual Property Policy
Terms & Conditions