|
|
New Standards
New, Revised, Reaffirmed, and Cancelled SAE Aerospace Material Specifications
February 2012
New standards status definitions
Click on the document number to find out more or to order online!
| Document | Committee | ?Status | Title |
|---|
| AMS2269F | AMSF | Reaffirmed | Chemical Check Analysis Limits, Nickel, Nickel Alloys, and Cobalt Alloys |
|---|
| AMS2447D | AMSB | Revised | Coating, Thermal Spray, High Velocity Oxygen/Fuel Process |
|---|
| AMS2672G | AMSB | Revised | Brazing, Aluminum Torch or Furnace |
|---|
| AMS2673E | AMSB | Revised | Brazing, Aluminum and Aluminum Alloys Molten Flux (Dip) |
|---|
| AMS3060B | AMSJ | Revised | Compound, Rust Inhibiting, Aircraft Engine Components |
|---|
| AMS3120H | AMSG8 | Stabilized | Enamel, Glyceryl Phthalate, Black Baking (STABILIZED Jan 2012) |
|---|
| AMS3125H | AMSG8 | Stabilized | Enamel, Glyceryl Phthalate, Engine Gray Baking (STABILIZED Jan 2012) |
|---|
| AMS3132J | AMSG8 | Stabilized | Varnish, Phenolic Resin, Corrosion-Preventive (STABILIZED Jan 2012) |
|---|
| AMS3333B | AMSG9 | Stabilized | Sealing Compound, Polysulfide, For Aircraft Windshields and Canopies, For Use up to 250 F (121 C) (STABILIZED Jan 2012) |
|---|
| AMS3358C | AMSG9 | Stabilized | Silicone Potting Compound, Elastomeric, Two-Part, General Purpose, 80 to 180 Poise (8 to 18 Pa.s) Viscosity (STABILIZED Jan 2012) |
|---|
| AMS3361C | AMSG9 | Stabilized | Silicone Potting Compound, Elastomeric, Two-Part, General Purpose, 150 to 400 Poise (15 to 40 Pa.s) Viscosity (STABILIZED Jan 2012) |
|---|
| AMS3362D | AMSG9 | Stabilized | Silicone Rubber Compound, Room Temperature Vulcanizing, 15,000 Centipoise Viscosity Durometer 35-55 (STABILIZED Jan 2012) |
|---|
| AMS3363E | AMSG9 | Stabilized | Silicone Rubber Compound, Room Temperature Vulcanizing, 50,000 Centipoise Viscosity, Durometer 30-45 (STABILIZED Jan 2012) |
|---|
| AMS3364D | AMSG9 | Stabilized | Silicone Rubber Compound, Room Temperature Vulcanizing, 50,000 Centipoise Viscosity, Short Application Life, Durometer 35-55 (STABILIZED Jan 2012) |
|---|
| AMS3366C | AMSG9 | Stabilized | Silicone Rubber Compound, Room Temperature Vulcanizing, 55,000 Centipoise Viscosity, Durometer 55-70 (STABILIZED Jan 2012) |
|---|
| AMS3368B | AMSG9 | Stabilized | Silicone Resin, Elastomeric, Transparent, Elevated Temperature Cure (STABILIZED Jan 2012) |
|---|
| AMS3370B | AMSG9 | Stabilized | Silicone Resin, Elastomeric, Transparent, Room Temperature Cure (STABILIZED Jan 2012) |
|---|
| AMS3372B | AMSG9 | Stabilized | Silicone Resin, Elastomeric, High Tear Strength, Elevated Temperature Cure (STABILIZED Jan 2012) |
|---|
| AMS3373C | AMSG9 | Stabilized | Compound, Silicone Rubber, Insulating and Sealing, 35 to 55 (STABILIZED Jan 2012) |
|---|
| AMS3373/1B | AMSG9 | Stabilized | Compound, Silicone Rubber, Insulating and Sealing, Oil and Reversion Resistant, Low Viscosity, Room Temperature Cure (STABILIZED Jan 2012) |
|---|
| AMS3373/2B | AMSG9 | Stabilized | Compound, Silicone Rubber, Insulating and Sealing, Oil and Reversion Resistant, Medium Viscosity, Room Temperature Cure (STABILIZED Jan 2012) |
|---|
| AMS3375C | AMSG9 | Stabilized | Adhesive/Sealant, Fluorosilicone Aromatic Fuel Resistant, One - Part Room Temperature Vulcanizing (STABILIZED Jan 2012) |
|---|
| AMS3378B | AMSG9 | Stabilized | Sealant, Silicone, Two-Part, General Purpose Room Temperature Vulcanizing Non-Fuel Resistant (STABILIZED Jan 2012) |
|---|
| AMS3579D | AE8D | Reaffirmed | Plastic Tubing, Electrical Insulation, Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable, 1.6 to 1 Shrink Ratio |
|---|
| AMS3582A | AE8D | Reaffirmed | Plastic Tubing, Electrical Insulation, Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable, 2 to 1 Shrink Ratio |
|---|
| AMS3593A | AE8D | Reaffirmed | Tubing, Plastic, Electrical Insulation, Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat-Shrinkable, Marker Sleeving Grade, Low Outgassing |
|---|
| AMS3634E | AMSP | Stabilized | Tubing, Polyolefin Plastic, Electrical Insulation, Selectively Crosslinked, Semi-Rigid, Heat-Shrinkable (STABILIZED Jan 2012) |
|---|
| AMS3635E | AMSP | Stabilized | Plastic Sheet and Strip, Modified Vinyl, Foamed, Closed Cell (STABILIZED Jan 2012) |
|---|
| AMS3636H | AMSP | Stabilized | Tubing, Plastic, Electrical Insulation, Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable, 2 to 1 Shrink Ratio (STABILIZED Jan 2012) |
|---|
| AMS3637G | AMSP | Stabilized | Tubing, Irradiated Polyolefin Plastic, Electrical Insulation, Clear, Flexible, Heat Shrinkable, 2 to 1 Shrink Ratio (STABILIZED Jan 2012) |
|---|
| AMS3638G | AMSP | Stabilized | Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Pigmented, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio (STABILIZED Jan 2012) |
|---|
| AMS3639G | AMSP | Stabilized | Tubing, Irradiated Polyolefin Plastic, Electrical Insulation, Clear, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio (STABILIZED Jan 2012) |
|---|
| AMS3642E | AMSP | Stabilized | Plastic Moldings, Laminated, Thermosetting Resin, Glass Cloth Reinforced, Heat Resistant (STABILIZED Jan 2012) |
|---|
| AMS3645D | AMSP | Stabilized | Polychlorotrifluoroethylene (PCTFE), Compression Molded Heavy Sections, Unplasticized (STABILIZED Jan 2012) |
|---|
| AMS3646D | AMSP | Stabilized | Sheet, Polychlorotrifluoroethylene (PCTFE) Molded, Unplasticized (STABILIZED Jan 2012) |
|---|
| AMS3648C | AMSP | Stabilized | Tubing, Polychlorotrifluoroethylene (PCTFE) Unplasticized (STABILIZED Jan 2012) |
|---|
| AMS3649D | AMSP | Stabilized | Film, Polychlorotrifluoroethylene (PCTFE) Unplasticized (STABILIZED Jan 2012) |
|---|
| AMS3650D | AMSP | Stabilized | Rods, Sheets, and Molded Shapes, Polychlorotrifluoroethylene (PCTFE), Unplasticized (STABILIZED Jan 2012) |
|---|
| AMS3664C | AMSP | Stabilized | Cloth, Glass, Vinyl Coated (STABILIZED Jan 2012) |
|---|
| AMS3666E | AMSP | Stabilized | Polytetrafluoroethylene (PTFE) Sheet, Glass Cloth Reinforced (STABILIZED Jan 2012) |
|---|
| AMS3683A | AE8D | Reaffirmed | Tubing, Irradiated Modified Fluoropolymer Plastic, Electrical Insulation, Flame Resistant, Flexible, Heat-Shrinkable, 2 to 1 Shrink Ratio |
|---|
| AMS3694B | AMSG9 | Stabilized | Aerodynamic Smoothing Compound, Flexible, -55� to +130C (-65 to +270C) (STABILIZED Jan 2012) |
|---|
| AMS3696C | AMSG9 | Stabilized | Aerodynamic Fairing Compound, -55 to +85C (-65 to +185F) (STABILIZED Jan 2012) |
|---|
| AMS3697C | AMSG9 | Stabilized | Aerodynamic Fairing Compound -55 to +150C (-65 to +300F) (STABILIZED Jan 2012) |
|---|
| AMS3722B | AMSP | Stabilized | Paper Honeycomb, 125 lb (55 kg) Paper (STABILIZED Jan 2012) |
|---|
| AMS3751C | AMSP | Stabilized | Microspheres, Hollow Glass (STABILIZED Jan 2012) |
|---|
| AMS4029L | AMSD | Revised | Aluminum Alloy Sheet and Plate (2014; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated |
|---|
| AMS4114J | AMSD | Canceled | Aluminum Alloy Bars and Rods, Rolled or Cold-Finished, 2.5Mg - 0.25Cr (5052-F), As Fabricated (Cancelled Jan 2012) |
|---|
| AMS4134F | AMSD | Revised | Aluminum Alloy, Die Forgings, 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4), Solution Heat Treated |
|---|
| AMS4166G | AMSD | Canceled | Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution Heat Treated and Overaged (Cancelled Jan 2012) |
|---|
| AMS4167J | AMSD | Canceled | Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73511) Solution Heat Treated, Stress Relieved by Stretching, and Overaged (Cancelled Jan 2012) |
|---|
| AMS4168K | AMSD | Canceled | Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated, Unstraightened (Cancelled Jan 2012) |
|---|
| AMS4169L | AMSD | Canceled | Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened and Precipitation Heat Treated (Cancelled Jan 2012) |
|---|
| AMS4207C | AMSD | Revised | Aluminum Alloy Sheet, Alclad, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T61) Solution and Precipitation Heat Treated |
|---|
| AMS4248C | AMSD | Revised | Aluminum Alloy Hand Forgings and Rolled Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T652), Solution Heat Treated, Stress Relief Compressed, and Precipitation Heat Treated |
|---|
| AMS4267A | AMSD | Canceled | Aluminum Alloy, Sheet (7055-O), 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr, Annealed (Cancelled Jan 2012) |
|---|
| AMS4317A | AMSD | Revised | Aluminum Alloy, Extruded Bar, Rod, and Shapes, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr, 7075-T76(51X) Solution Heat Treated and Overaged |
|---|
| AMS4446C | AMSD | Revised | Magnesium Alloy, Sand Castings, 8.7Al - 0.70Zn - 0.26Mn (AZ91E-T6) Solution and Precipitation Heat Treated |
|---|
| AMS4461 | AMSD | Issued | Aluminum Alloy, Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-O, Sheet and Plate) Annealed; or when specified, "As Fabricated" (2024-F) |
|---|
| AMS4463 | AMSD | Issued | Aluminmum Alloy, Plate (7255-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.12Zr, Solution Heat Treated, Stress Relieved, and Overaged |
|---|
| AMS4464 | AMSD | Issued | Aluminum Alloy Plate (2624-T351) 4.1Cu - 1.4Mg - 0.6Mn, Solution Heat Treated, Cold Worked and Naturally Aged |
|---|
| AMS4468 | AMSD | Issued | Aluminum Alloy, Plate, 5.0Cu - 0.4Mn - 0.5Mg - 0.4Ag (2139- T84), Solution Heat Treated, Cold Worked, and Artificially Aged |
|---|
| AMS4911M | AMSG | Revised | Titanium Alloy, Sheet, Strip, and Plate, 6Al - 4V, Annealed |
|---|
| AMS5521J | AMSF | Revised | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 25Cr - 20Ni (SAE 310S), Solution Heat Treated |
|---|
| AMS5523G | AMSF | Revised | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 23Cr - 13.5Ni (309S), Solution Heat Treated |
|---|
| AMS5571J | AMSF | Revised | Steel, Corrosion and Heat-Resistant, Seamless Tubing, 18Cr - 10.5Ni - 0.70Cb (Nb) (347), Solution Heat Treated |
|---|
| AMS5618H | AMSF | Revised | Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 17Cr - 0.52Mo (0.95 - 1.20C) (440C), Consumable Electrode Vacuum Melted |
|---|
| AMS5630K | AMSF | Revised | Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 17Cr - 0.52Mo (0.95 - 1.20C) (440C) |
|---|
| AMS5712J | AMSF | Reaffirmed | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B, Vacuum Melted, Solution Heat Treated, Precipitation Hardenable |
|---|
| AMS5880D | AMSF | Canceled | Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C), for Bearing Applications (Cancelled Jan 2012) |
|---|
| AMS6482 | AMSE | Issued | Steel Bars, Forgings, and Tubing, 1.5Si - 1.25Cr - 3.8Ni - 0.50Mo - 0.30V (0.40C) Vacuum Remelted, Quenched and Tempered |
|---|
|
| | Access over 2,400 individual standards, recommended practices, and information reports pertaining to passenger cars... | | Find out more about SAE Standards | A World In Motion® brings STEM education to life in the classroom |
|
