| SAE members save 20% on most products priced under $500. |
|
|
New Standards |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Document | Committee | Action | Title |
|---|---|---|---|
| AIR1204A | AC9 | Revised | Control of Water Carryover from the Environmental Control System and Condensation on the Structure |
| ARP1590A | G3 | Revised | Recommended Part Numbering Guidelines for Fluid System Components Inch System of Measurement |
| ARP1816C | AGE2C | Revised | Charger for Battery Powered Ground Support Equipment |
| MA3289B | E25 | Revised | Bolt, Machine-Hex Head-PD Shank MJ Thread, AMS6322, Cadmium Plate, Metric |
| MA3339B | E25 | Revised | Bolt, Machine-Spline Extended Washer, PD Shank, Long Thread, AMS6322, Cadmium Plated, Metric |
| MA3367B | E25 | Revised | Bolt, Machine-Spline Drive Head, Drilled, PD Shank-Long Thread, AMS6322, Cadmium Plated, Metric |
| AS3658A | E25 | Revised | Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Cobalt-Nickel Alloy, UNS R30159, 260 ksi min |
| ARP4378A | A6C6 | Revised | Aerospace - Accumulator, Hydraulic, Welded Bellows, Factory Precharged |
| AIR4827A | EG1E | Revised | Modeling Techniques for Jet Engine Test Cell Aerodynamics |
| ARP5311 | A6B3 | Reaffirmed | Aerospace-Interface Definition for Mechanical Actuation Subsystems |
| ARP5535 | G10T | Reaffirmed | Observers for Laser Safety in the Navigable Airspace |
| AS5587B | G3 | Revised | Clamp, Loop, Plain, Support, Aircraft |
| ARP5660 | G12DF | Issued | Deicing Facility Operational Procedures |
| AS5680 | AS1B | Issued | Fuze Well Mechanical Interface |
| AS5972C | G3 | Revised | Fitting Assembly, Tee, Axially Swaged, Hydraulic, 5080 psi |
| AS7108/1B | NADCAP | Canceled | National Aerospace and Defense Contractors Accreditation Program Requirements for Painting and Dry Film Coatings (Cancelled Jun 2009) |
| AS9016 | G14 | Issued | Aerospace Series - Notice of Change (NOC) Requirements |
| AS9110A | G14 | Revised | Quality Management Systems - Requirements for Aviation Maintenance Organizations |
| AS9120A | G14 | Revised | Quality Management Systems - Requirements for Aviation, Space and Defense Distributors |
| AS9449B | E25 | Revised | Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head UNS K14675, 195 ksi Min, .1380-40 UNJF-3A |
| AS29600/1 | AE8C1 | Reaffirmed | Connector, Electrical, Circular, Miniature, Composite, High Density, Quick Coupling, Environment Resistant, Removable Crimp Contacts, Sealing Plug, Size 8, (Series A) |
| AS29600/2 | AE8C1 | Reaffirmed | Connector, Electrical, Circular, Miniature, Composite, High Density, Quick Coupling, Environment Resistant, Removable Crimp Contacts, Backshell, Shield Terminating, (Series A and B) |
| AS29600/23 | AE8C1 | Reaffirmed | Connectors, Electrical, Circular, Miniature, Composite, High Density, Quick Coupling, Environment Resistant, Contacts, Socket, Crimp Removable, (For MIL-C-29600 Series B) |
| AS31371A | AE8C1 | Reaffirmed | Connector, Plug, Electric, Solder Type, Push-Pull Coupling Series 1 (Class E, P and J) |
| AS39029/108A | AE8C1 | Canceled | Contacts, Electrical Connector, Pin, Crimp Removable, Socket, Single Wire (Cancelled Jun 2009) |
| AS39029/109A | AE8C1 | Canceled | Contacts, Electrical Connector, Pin, Crimp Removable, Socket, Multiple Wires (Cancelled Jun 2009) |
| AS39029/16A | AE8C1 | Revised | Contacts, Electrical Connector, Socket, Crimp-Removable (For MIL-C-81511 Series 4 Connectors) |
| AS39029/73A | AE8C1 | Revised | Contacts, Electrical Connectors, Socket, Solder, Removable, Shielded, Size 12 (For MIL-DTL-83723 Series III, MIL-DTL-26482 Series 2, MIL-DTL-83733, and MIL-DTL-83527 Connectors) |
| AS39029/74A | AE8C1 | Revised | Contacts, Electrical Connectors, Pin, Solder, Removable, Shielded, Size 12 (For MIL-DTL-83723 Series III, MIL-DTL-26482 Series 2, MIL-DTL-83733 and MIL-DTL-83527 Connectors) |
| AS85049/1A | AE8C1 | Reaffirmed | Connector Accessories, Electrical, Backshell Environmental, Cable Sealing, Straight, Grounding (Without Strain Relief), Category 1c (For Mil-C-5015 Solder Type, V Thread of Ms310x Classes A, B. C Or K Connectors) |
| AS85049/14A | AE8C1 | Reaffirmed | Connector Accessories, Electrical, Backshell, Straight, Non-Self-Locking and Self-Locking, Category 3B (For MIL-DTL-38999 Series III and IV Connectors) |
| AS85049/15A | AE8C1 | Reaffirmed | Connector, Accessories, Electrical, Strain Relief, 45�, Non-Self-Locking and Self-Locking, Category 4C (For MIL-DTL-38999 Series III and IV Connectors) |
| AS85049/16A | AE8C1 | Reaffirmed | Connector, Accessories, Electrical, Strain Relief, 90�, Non-Self-Locking and Self-Locking, Category 4C (For MIL-DTL-38999 Series III and IV Connectors) |
| AS85049/2A | AE8C1 | Reaffirmed | Connector Accessories, Electrical, Backshell, Environmental, Cable Sealing, Straight, Category 1C (For MIL-DTL-5015 Solder Type, V Thread of MS310X Classes A, B, C or K Connectors) |
| AS85049/60A | AE8C1 | Reaffirmed | Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For MIL-C-5015 Crimp, MIL-C-26482 Series 2, MIL-C-81703 Series 3, and MIL-C-83723 Series III Connectors) |
| Document | Committee | Action | Title |
|---|---|---|---|
| AS85049/59_A2 | AE8C1 | Amended | Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For MIL-DTL-22992 Connectors, Classes C, J, and R) |
To download a free copy of the Amendment listed in this month's Hot Off The Press, go to the SAE website at www.sae.org and search on the document number of the original document. The summary page of the standard will display a link for downloading the Amendment. If you have any questions, please contact SAE Customer Service at 724-776-4970 or 1-877-606-7323.