Amtec Cell Optimization for Advanced Radioisotope Power System (Arps) Design

Document Number: 1999-01-2655

Date Published: August 1999

Author(s):
Chendong Huang - Advanced Modular Power Systems Inc.
Terry J. Hendricks - Advanced Modular Power Systems Inc.
Lianmin Huang - Advanced Modular Power Systems Inc.

Abstract:
An AMTEC cell optimization study investigated various cell design performance tradeoffs for an AMTEC cell operating in a 4- GPHS (General Purpose Heat Source) ARPS using 16 AMTEC cells per system. The design objective was to generate 141 watts at beginning-of-mission (BOM), 112 watts at 6-year, end-of-mission (EOM), and 99 watts at 14-year EOM from the 4-GPHS/16-cell system at a system voltage of 28 volts (cell voltage 3.5 volts). Cell performance predictions on a system-level compared the effect of BASE tube number, BASE tube sizing, electrode performance parameters, thermal shield design, and condenser emissivity on cell-level and system-level performance. The selected reference cell design is 2 inches diameter, 4 inches length using electrodes characterized by a B\me120 A-K\u1\u/\u2/m\u2-Pa and G\me10, one cylindrical and 21 conical thermal radiation shields, and eight BASE tubes having a 0.40 inch diameter and 1.0 inch active length. The reference design is projected to produce a system power output of 140-143 watts at 28 volts from the 4-GPHS, 16-cell system configuration. Cell power output at a cell voltage of 3.5 volts is projected to be 8.76 - 8.95 watts/cell. The cell is capable of producing a peak power of 9.0-9.25 watts at approximately 4.0 volts per cell, so the power penalty at 3.5 volts is minimal. Equally important, the maximum BASE tube temperatures are projected to be about 818-821\mDC, well below the 850\mDC maximum specification, and evaporator temperatures are predicted to be 788-790\mDC for electrodes characterized by B\me120 A- K\u1\u/\u2/m\u2-Pa and G\me10. These relatively low temperatures will greatly alleviate material compatibility and material degradation issues within cell components.

File Size: 245K
Product Status: In Stock

See other papers presented at 34th Intersociety Energy Conversion Engineering Conference, August 1999, Vancouver, BC, CANAD, Session: Alkali Metal Thermal-to-Electric Conversion (AMTEC) I

Purchase more technical papers and save! With TechSelect, you decide what SAE Technical Papers you need, when you need them, and how much you want to pay. Learn more >