Influence of Injection Timing and Piston bowl Geometry on PCCI Combustion and Emissions

Document Number: 2009-01-1102

Date Published: April 2009

Author(s):
Li Cao - Univ. of Cambridge
Markus Kraft - Univ. of Cambridge
Sebastian Mosbach - Univ. of Cambridge
Haiyun Su - Univ. of Cambridge
Robert McDavid - Caterpillar Inc.
Antonis Dris - Caterpillar Inc.
Amit N. Bhave - Reaction Engineering Solutions, Ltd.

Abstract:
Premixed Charge Compression Ignition (PCCI), a Low Temperature Combustion (LTC) strategy for diesel engines is of increasing interest due to its potential to simultaneously reduce soot and NO\dx emissions. However, the influence of mixture preparation on combustion phasing and heat release rate in LTC is not fully understood. In the present study, the influence of injection timing on mixture preparation, combustion and emissions in PCCI mode is investigated by experimental and computational methods. A sequential coupling approach of 3D CFD with a Stochastic Reactor Model (SRM) is used to simulate the PCCI engine. The SRM accounts for detailed chemical kinetics, convective heat transfer and turbulent micro-mixing. In this integrated approach, the temperature-equivalence ratio statistics obtained using KIVA 3V are mapped onto the stochastic particle ensemble used in the SRM. The coupling method proved to be advantageous in terms of computational expense and emission prediction capability, as compared with direct coupling of CFD and chemical kinetics. The results show that the fuel-rich pockets in the late injection timing are desirable for triggering auto-ignition and advancing the combustion phasing. Furthermore, the model is utilized to study the impact of combustion chamber design (open bowl, vertical side wall bowl and re-entry bowl) on PCCI combustion and emissions. The piston bowl geometry was observed to influence the in-cylinder mixing and the pollutant formation for the conditions studied.

File Size: 2654K
Product Status: In Stock

Included in: V118-3

See other papers presented at SAE World Congress & Exhibition, April 2009, Detroit, MI, USA, Session: HCCI (Part 6 of 7)

Purchase more technical papers and save! With TechSelect, you decide what SAE Technical Papers you need, when you need them, and how much you want to pay. Learn more >