An Overhead Cam Wear and Valvetrain Dynamics Study

Document Number: 892149

Date Published: September 1989

Author(s):
Edward T. King - Ford Motor Co.
Granger K. Chui - Ford Motor Co.

Abstract:
A 22 hour engine test was developed to evaluate the effects of fuels, lubricants, and valvetrain dynamics on the wear of OHC 2.3L engine camshaft and finger followers. Procedures include a break-in to improve test repeatability and a test sequence to allow single- shift operation. A surface analyzer capable of measuring cam lobe wear profiles to micro-inch accuracy provided a quantitative wear comparison.

A pure mineral oil, as expected, resulted in higher camshaft wear than using a fully formulated SF lubricant. Cam and follower wear increased significantly when ethanol replaced gasoline as fuel. The combination of ethanol, mineral oil and heavy-duty valve springs was selected to increase test severity for hardware discrimination.

The average wear of the intake lobes was greater than the exhausts. Kinematic analysis and visual inspection of the valve train mechanism revealed differences in the relative motion and contact stress pattern. Insufficient hydrodynamic oil film, long duration of high contact stress and entrapment of abrasive particles appear to cause increased wear. Methods to reduce cam wear are suggested.

File Size: 481K
Product Status: In Stock

Purchase more technical papers and save! With TechSelect, you decide what SAE Technical Papers you need, when you need them, and how much you want to pay. Learn more >