High Capacity Grooved Heat Pipes

Document Number: 932303

Date Published: July 1993

Author(s):
M. Dubois - SABCA
B. Mullender - SABCA
S. Van Oost - SABCA
W. Supper - ESTEC

Abstract:
In the frame of an ESA technology program, the development of a High Capacity Grooved Heat Pipe (HGP), based on the thermal requirements of the next generation of telecommunication satellites, was contracted to SABCA.

Different promising concepts and methods of groove technology were reviewed. A trade- off and design study was performed on potential HGP concepts, taking into account theoretical performances (on earth and in micro-gravity), ease of manufacturing and of assembly as well as the heat pipe working reliability and priming capability.

The two finally selected concepts were aluminum extruded heat pipes (outer diameter of 25 mm, vapor core diameter of 15 mm), based on a multi re-entrant grooves concept or on a mixed rectangular/re-entrant grooves concept.

The acceptance test program, to which these two heat pipes had been submitted, included leak, proof and burst tests as well as classical thermal tests (maximum heat transport capacity, maximum tilt capability, start-up, priming, gas plug/ageing, bending influence, sensitivity to non0condensible gas, non-uniform heat input).

The test results showed for the multi re-entrant grooves HGP heat pipe good confidence and the fulfillment of the required specifications on heat transport capability and on tilt capacity: the experimental maximum heat transport capability was found to be around 1500 Watt-meters (horizontally at a vapor temperature of 20\mDC) for a required 600 Watt-meters while the maximum tilt capability had been measured between 18 mm (at a vapor temperature of 20\mDC).

Based on the HGP concept, two down-scaled versions (outer diameter of 15 mm and of 20 mm) had been developed and tested in order to analyze the impact of the size on the performance of this heat pipe design.

In the frame of an ESA parabolic flight campaign, the three versions of the HGP heat pipes (15 mm, 20 mm, 25 mm) were submitted to various heat loads, going for some of them to their maximum heat transport capacities. This parabolic flight, which led to useful data on the maximum performances and/or on their operating behavior of these heat pipes in micro-gravity environment, is briefly presented and its results described.

The next step in this technology program, currently on-going, is the full qualification of this newly developed re-entrant groove heat pipe design according to the ESA requirements.

File Size: 948K
Product Status: In Stock

See other papers presented at International Conference On Environmental Systems, July 1993, Colorado Springs, CO, USA, Session: International Conference On Environmental Systems

Purchase more technical papers and save! With TechSelect, you decide what SAE Technical Papers you need, when you need them, and how much you want to pay. Learn more >