SAE Papers

Paper Number	Paper Title	Book Number
2009-01-0999	A Study on Sealing Behavior of Rubber O-Ring in High Pressure Hydrogen Gas	V118-5
2009-01-0995	A Study on the Surface Temperature of Rotary Lip Seals
2009-01-0993	Cylinder Head Gasket for High Combustion Pressure Diesel Engines	V118-3
2009-01-0994	Fluoroelastomer Compatibility with Bioalcohol Fuels	V118-4
2009-01-0996	Next Generation Formed-In-Place Gasket (FIPG) Liquid Sealant for Automotive Intake Manifold Application
2008-01-1477	A New approach to Evaluate Sealing Characteristics of Reciprocating Seals
2008-01-1479	Development of the Low Friction Radial Lip Seals
2008-01-1497	Enhancing the Flexural Capabilities of PTFE Seals
2008-01-1478	Next Generation Formed-In-Place Gasket (FIPG) Liquid Sealant for Automotive Powertrain Applications
2007-01-1520	A New High Temperature Exhaust Sealing System	V116-5
2007-01-1516	Low VOC Water Borne Pressure Sensitive Double Coated Tape
2007-01-1521	Measurement Method of Pumping Ability of Radial Lip Seals for Small Shaft Diameters
2007-01-1517	Reliability Analysis of Adhesive for PBT-Epoxy Interface	V116-5
2007-01-1519	Rubber Peeling Mechanism of SOFT METAL for CHG
2006-01-1209	A Filter Seal Model for Point Mobility Prediction of Air Induction Systems
2006-01-0973	A New Tetrafluoroethylene-Propylene Fluoroelastomer and its Cure System
2006-01-0976	Effect on Fuel Permeation Based on Changes in Seal Design
2006-01-1212	Engineering an Improved Performance PTFE Crankshaft Seal
2006-01-0972	Foamability of Thermoplastic Vulcanizates (TPVs) with Various Physical Blowing Agents (PBAs)
2006-01-1210	Numerical and Experimental Analysis of Exhaust Manifold Gasket
2006-01-1211	Seamless Integration of Combustion Pressure Sensors into a Cylinder Head Gasket
2006-01-0974	Thermal Deformation of Polycarbonate Glazing Panels: Role of Connecting Mechanisms
2006-01-0975	Wash Off Resistant 1-Component Structural Adhesives
2005-01-1744	A Study on Leakage Due to Deterioration of the Sealing Surface on Grease Seals	SP-1961
2005-01-1750	Coined Stopper Technology for MLS Cylinder Head Gasket	SP-1961
2005-01-1743	Development of New FKM O-Rings with Superior Fuel-Oil Resistance and Low-Temperature Properties	SP-1961
2005-01-1753	Development of the New FKM O-Ring for a Cooling Device	SP-1961
2005-01-1751	Effects of Contact Conditions on Sealing of a Thin Rubber Coating	SP-1961
2005-01-1748	Evaluation of Leakage-Retaining Capacity (SAE J1002) for Different Concepts of Hydrodynamic Seals	SP-1961
2005-01-1747	Structural Adhesive Bonding: The Most Innovative Joining Technique for Modern Lightweight Design, Safety and Modular Concepts -Progress Report-	SP-1961
2005-01-1752	The Friction Characteristic of the Squeeze Packing for Movement	SP-1961
1-114-3-56	Nano Goes Macro
2004-01-1039	A New Coating for Multi-Layer Steel Exhaust Gaskets
2004-01-1033	Advantages of a New Hard Carbon for Water Pump Seals for Automotive Engines
2004-01-1035	Deformation and Reaction Force of a Rubber Gasket Due to Buckling
2004-01-1040	Determining Reasons for Head Gasket Failures in Air-Cooled Engines With a Simple Testing Methodology
2004-01-1034	Developing a Method for Evaluating High-Pressure Gas Permeability-Leakage
2004-01-1037	Development of Fipg for Magnesium Alloys
2004-01-0011	Finite Element Analysis of Modules Made of Thermoplastic Materials and Elastomeric Gaskets for Powertrain Applications
2004-01-1031	Material and Dimensional Considerations During the Hydraulic Seal Selection Process
2004-01-1038	New Cured-In-Place Gasket Technology Using Uv-Cured High-Performance Elastomers
2004-01-1041	Rubber-Edged Composites: a Unique Approach to Reducing the Effects of Compression Stress Relaxation on Static Rubber Seals
2004-01-0001	The Determination of a Tough Silicone Adhesive That Can Be Rapidly Cured and Adhered to Multiple Substrates	SP-1850
2000-01-0421	Adhesives for Bonding Plastics
2000-01-0418	Advanced Material Technologies - A Key Factor for Ultimate Driving Performance
2000-01-0752	Compression Stress Relaxation Test Comparisons and Development
2000-01-1391	Designing An Interior Applied Waterborne Coating for Use in Automotive Paint Shops to Replace Sound Deadening Pads
2000-01-0419	Experimental Sensitivity Studies on Glass Bonding Urethanes
2000-01-1387	New Low Mdi Polyurethane Foam System Replaces Heat Reactive Baffles in NVH Applications
2000-01-0422	Properties and Applications of An Anaerobic Sealant for High Joint Movement
2000-01-0423	Requirements for Improved Performance of Specialty Sealing and Bonding Materials for Automotive Applications
2000-01-0426	Stress Analysis and Strength Evaluation of Bonded Shrink Fitted Joints Subjected to Torsional Loads
2000-01-0425	Use of Waterborne, "Bakeable" Technology for Sealing Interior Seams in the Paint Shop-A Halogen Free Approach
980463	A Finite Element Approach to Study the Effect of High Modulus Urethane on Body Stiffness
980464	High-Modulus/Low-Conductivity Windshield Adhesives for Better Body Stiffness, Comfort and Durability
980462	Next-Generation Hemflange Adhesive
971747	Advanced Machining Processes
810746	Continuously Produced Steel Laminates Having Polymeric Cores
810766	Structural Urethane Adhesives for High Speed Automotive Assembly
810816	Weldbonding Aluminum in the Presence of Forming Lubricants
080015	What carbon does to automobile steel