SAE Papers

Paper Number	Paper Title	Book Number
1-116-5-54	Lightweighting the way
1-115-7-70	Mass reduction-the next frontier
2006-01-0542	A Phenomenological Model for Fatigue Life Prediction of Highly Loaded Cylinder Heads	SP-2031
2006-01-0987	Demonstration of the Preform Anneal Process to Form a One-Piece Aluminum Door Inner Panel
2006-01-0986	Development of High-strength Piston Material with High Pressure Die Casting
2006-01-0981	Electrochemical Behaviour of Brazed Aluminum Alloy used in Automotive Heater Cores
2006-01-0982	Investigation of Fluid Circulation Effect on the Internal Corrosion Resistance of Automotive Heater Core
2006-01-0983	New Aluminum Alloys for Cylinder Liner Applications
2006-01-0985	Paint Bake Response on the Vehicle
2006-01-0984	The Effect of Retrogression Heat Treatments on Aluminum Flanging and Trimming
2005-01-0465	2006 Chevrolet Corvette Z06 Aluminum Spaceframe	PT-118
2005-01-0466	2006 Chevrolet Corvette Z06 Aluminum Spaceframe Design and Engineering Technology	PT-118
2005-01-0470	2006 Chevrolet Corvette Z06 Aluminum Spaceframe Manufacturing Technology	PT-118
2005-01-1392	Aluminum Tube Hydroforming: Formability and Mechanical Properties	SP-1948
2005-01-1390	Improvement in the Brazeability of Aluminum Clad Thinner Fin for Automotive Heat Exchanger	SP-1948
2005-01-1387	Optimizing Designs of Aluminum Suspension Components Using an Integrated Approach	SP-1949
2005-01-1389	Research in Aluminum Matrix Composites for Improvement in Damping Capacity	SP-1948
2005-01-1391	Shape Memory Effect of TiNi Short Fiber on Mechanical Properties of TiNi/Al6061 Composite	SP-1948
2005-01-1394	Statistical Variability in Strain-Life Materials Data	SP-1948
2005-01-1388	The Warm Ductility of Commercial Aluminum Sheet Alloys	SP-1948
1-113-8-55	Material Issue
1-113-7-55	Material issue
1-112-10-106	Metal Mountain
2004-01-1029	A Comparative Investigation on the High Temperature Fatigue of Three Cast Aluminum Alloys	PT-130
2004-01-0181	Development of a Multi-Product Aluminum Trailer Hitch Assembly	SP-1846
2004-01-0183	Dynamic Denting Study of Aluminum Alloys	SP-1838
2004-01-0793	Effect of Liquid Environments on the Tensile Properties of Ductile Iron	SP-1838
2004-01-0128	Energy Absorption Capacity for Hpdc Components	SP-1845
2004-01-1021	Factors Affecting Tensile Properties of Castings	SP-1838
2004-01-1333	Friction Stir Welding of Extruded Aluminum for Automotive Applications
2004-01-1028	Hypereutectic Al-20%Si Alloy Engine Block Using High-Pressure Die-Casting	SP-1838
2004-01-1330	Microstructures and Failure Mechanisms of Spot Friction Welds in Lap-Shear Specimens of Aluminum 6111-T4 Sheets	SP-1842
2004-01-1020	Optimized Fluid Flow Pattern for Automotive Lightweight Component Castings	SP-1838
2004-01-1023	Optimizing the Melt Treatment of Piston Alloys Using Thermal Analysis Technique	SP-1838
2004-01-1022	Role of T7 Heat Treating on the Dimensional Stability of Automotive A319 Al Alloys	SP-1838
2004-01-1025	Semi-Solid Metal Casting Practices: Past, Present and Future	SP-1838
2004-01-0792	Solidification Behavior, Microstructure, Mechanical Properties, Hot Oxidation and Thermal Fatigue Resistance of High-Silicon Simo Nodular Cast Irons	SP-1838
2004-01-1328	Study of Thermal and Heat Transfer Phenomenon in Friction Stir Welding of Aluminum Alloy 6061-T6 Thick Plates	SP-1842
2004-01-0794	The Current State of Worldwide Standards for Ferrous Castings	SP-1838
2004-01-1027	The Effect of Hip Processing on the Properties of A356 T6 Cast Aluminum Steering Knuckles	SP-1838
2004-01-1019	The Response of Two Al-Si-Mg Castings to An Integrated Hip and Heat Treat Process	SP-1838
2004-01-0182	Through-Process Modelling of Aluminum Sheet for Improved Property Predictions	SP-1838
2004-01-0185	Ultra-High-Speed Machining of A356-T6 Aluminum Alloy for Automotive Applications	SP-1838
1-111-4-97	Aluminum and the XJ
2003-01-0572	A Design Concept for An Aluminum Sport Utility Vehicle Frame	PT-130
2003-01-0575	A New Approach for Robust High-Productivity Resistance Spot Welding of Aluminum	PT-130
2003-01-0576	A Study on the Bending Springback of Aluminum Alloy 5754
2003-01-0571	Springback Prediction With Ls-Dyna and Die Face Compensation of Aluminum Hood Inner
2003-01-0573	The P2000s Unitized Sport Utility Vehicle Body Structure	PT-130
2003-01-0570	Verification and Test Methodologies for Structural Aluminum Repair	PT-130
2002-32-1796	A New Method for Valve Seat Without Ring
2002-32-1807	Development of Compound-Laser Welding Method for Aluminum- Alloy Structure of Motorcycles
2002-32-1808	Development of P/M Aluminum Alloy and Extrusion Process for Cylinder Liners
2002-32-1794	Development of Rapid Composite Plating System for Motorcycle Engine Cylinders
2002-01-0388	A New Evaluation Method for the Measurement of Internal Corrosion Resistance in Braze Clad Alloys
2002-01-0626	A Wear-Resistant Coating for Aluminum-Silicon Alloys Using Microarc Oxidation and An Application to An Aluminum Cylinder Block	PT-130
2002-01-0391	An Ultra-Light Thin Sliding Door Design--A Multi-Product Multi-Material Solution
2002-01-0622	Casting and Machining Process Analysis At General Motors Corporation Powertrain	PT-130
2002-01-0392	Classical Plasticity Hardening for Finite Element Analysis of Cast Aluminum Powertrain Components	PT-130
2002-01-0390	Considerations About the Aluminum Dispersion Strengthened Alloy
2002-01-0678	Design of a Lightweight Aluminum Cast Crossmember
2002-01-0386	Influence of Weld Characteristics on Numerically Predicted Deformation Behavior of Aluminum Tailor-Welded Blanks
2002-01-0394	Semi-Solid Metal Processing of Aluminum Alloy A390
2002-01-0602	Technology Advances in the Design and Manufacture of Phenolic Torque Converter Reactors	SP-1682
2002-01-0389	The Effect of Microstructural Variables on the Surface Roughening of 5xxx Series Aluminum Sheet in Biaxial Tension	PT-130
2002-01-0387	The Influence of Weld Current and Time on the Properties of Spot Welds in 5754 Aluminum Alloy Sheet
2001-01-3043	Benefits of Using Pre-Treated, Pre-Aged Aluminum 6xxx Sheet Material for Closure Applications
2000-01-0337	Alulight - Aluminum Foam for Lightweight Construction
2000-01-1291	Aluminum Alloys for Automotive Knuckle Castings
2000-01-0359	Aluminum Wheel Styling At the Component Supplier Level
2000-01-0066	Analytical Crush Resistance of Hybrid Aluminum_Rcm Roof Structures
2000-01-0678	Automotive Applications Using Advanced Aluminum Die Casting Processes
2000-01-0064	Cosmetic Corrosion of Aluminum Closure Panels: Lab Testing Versus Field Performance
2000-01-0773	Damage Characterization and Damage Percolation Modeling in Aluminum Alloy Sheet
2000-01-0761	Design Review of Cast Aluminum Scroll Compressor Components
2000-01-1156	Design of An Aluminum Differential for a Racing Style Car
2000-01-0063	Development of a Hard Surfacing Process for the Inner Bores of Aluminum Engines
2000-01-0783	Effects of Hole-Making Processes and Surface Conditioning on Fatigue Behavior of 6061-T6 Aluminum
2000-01-1118	Fastening of Lightweight Components With Elements Made of Aluminum
2000-01-0772	Formability of Aluminum Tailor-Welded Blanks
2000-01-0760	High-Integrity Structural Aluminum Casting Process Selection
2000-01-0060	High-Volume, Semi-Solid Forming of Aluminum Master Cylinders
2000-01-0062	Hot Isostatic Pressing of A356 and 380/383 Aluminum Alloys: An Evaluation of Porosity, Fatigue Properties and Processing Costs
2000-01-0061	Manufacturing Feasibility of All-Aluminum Automotive Engines Via Application of High Silicon Aluminum Alloy
2000-01-1231	Mmc All-Aluminum Cylinder Block for High-Power SI Engines
2000-01-0396	New Copper Alloy Powder for Laser-Clad Valve Seat Used in Aluminum Cylinder Heads
2000-01-0333	New Directions in Aluminum-Based P/M Materials for Automotive Applications
2000-01-0784	Observations of the Relative Performance of Magnesium and Aluminum Steering Wheel Skeletons With Identical Geometry
2000-01-0767	On Elastoplastic Buckling of Aluminum Sheet
2000-01-0059	Rheocasting of Semi-Solid A357 Aluminum
2000-01-0774	Sheet Metal Forming Simulation for Aluminum Alloy Sheets
2000-01-0759	The Effect of Copper Level and Solidification Rate on the Aging Behavior of a 319-Type Cast Aluminum Alloy
2000-01-0335	Ultra-Lightweight Aluminum Foam Materials for Automotive Applications
1999-01-3171	Aftermarket Paint Repair of Aluminum Closure Panels
1999-01-3180	Application of Hydroformed Aluminum Extrusions to Vehicle Sub- Frame With Varied Wall Thickness
1999-01-3174	Design, Engineering and Production of the Alcoa Aluminum Spaceframe for FerrariS 360 Modena
1999-01-3195	Development of 6xxx Alloy Aluminum Sheet for Autobody Outer Panels: Bake Hardening, Formability and Trimming Performance
1999-01-3165	High Power CoD2 Laser Aluminum Tailored Blank Welding
1999-01-2688	Composite Lithium Electrolytes Based on Aluminum Carboxylates
1999-01-0346	Aluminum Alloys for Automotive Disc Brake Calipers
1999-01-0674	Aluminum Usage in the Pngv and Its Impact on the Recycling Infrastructure
1999-01-0347	Cast Aluminum Alloy Wheels for Heavy Duty Trucks
1999-01-0136	Cavitation Erosion-Corrosion Testing in Aluminum Pumps With Engine Coolants
1999-01-0128	Consideration of Fluid Velocity Effects in the Design and Development of Aluminum Cooling System Components for Heavy Duty Diesel Engines
1999-01-0662	Data for the Design of Welded Aluminum Sheet Suspension Components
1999-01-0659	Design and Fabrication of An Aluminum Engine Cradle for a General Motors Vehicle
1999-01-0345	Determination of Assembly Stresses in Aluminum Knuckles
1999-01-0350	Development of a Wear Resistant Aluminum Alloy for Automotive Components
1999-01-0352	Elimination of Electrocoating on Aluminum Intensive Vehicles
1999-01-0166	Experimental Investigations of Forced Cooling for Aluminum Heat Sinks of High-Power Electronics
1999-01-0235	First-Time Use of Aluminum for Engine Oil Coolers in Heavy Commercial Vehicles
1999-01-1225	Influence of Crankshaft Material and Design of the NVH Characteristics of a Modern, Aluminum Block, V-6 Engine
1999-01-0660	Joining Aluminum to Steel With Transition Material
1999-01-0016	Life-Cycle Assessment of a Powertrain Structural Component: Diecast Aluminum Vs. Hypothetical ThixomoldedSr Magnesium
1999-01-0645	Low Cycle Fatigue of Aluminum Cylinder Heads - Calculation and Measurement of Strain Under Fired Operation
1999-01-0040	Low Pressure Permanent Mold (Lppm) Process for Aluminum Suspension Castings
1999-01-0661	Sliver Reduction in Trimming Aluminum Autobody Sheet
1999-01-0344	Squeeze Cast (Scpm) Light Weight Aluminum Front Knuckle Case Study
1999-01-0343	Squeeze Cast Automotive Applications and Squeeze Cast Aluminum Alloy Properties
1999-01-0613	The Development of the University of WisconsinS Parallel Hybrid-Electric, Aluminum-Intensive Vehicle
1999-01-1006	The Properties of Bright Stainless Steel Clad to Aluminum for Class 8 Truck Bumper Applications
1999-01-0887	Weight Savings By Aluminum Metal Foams: Production, Properties and Applications in Automotive
982389	A Comparison of the Safety Performance of Aluminum and Steel in Conventional Automotive Construction
982331	Application of Aluminum Extrusions to Suspension Arms
982375	Determination of Forming Limits for Aluminum Alloys
982397	New System Concepts for Steel and Aluminum Tailored Blank Welding
982378	Phosphate Uniformity of Aluminum Closure Sheet
982279	The Application of Bonded Aluminum Sandwich Construction Technology to Achieve a Lightweight, Low Cost Automotive Structure
982285	The Application of Steel and Aluminum in a New Lightweight Car Body Design
982106	Laser Processed Aluminum Surfaces in Automotive Applications: Performance Requirements for Cylinder Bores and Valve Seats
982107	Metal Compression Forming - A New Process for Structural Aluminum Alloy Castings
980053	A Numerical Simulation of the Thermal Process in Controlled Atmosphere Brazing (Cab) of An Aluminum Heat Exchanger
980259	A Study on the Chrome Platability of Cast Aluminum Wheels
980461	Aluminum Wheel Alloy Variants: Effects on Corrosion Performance
981095	Application Guide for Tapered Roller Bearings in Aluminum Differential Housings
980453	Clean and Cost-Effective Dry Boundary Lubricants for Aluminum Forming
980698	Fretting Fatigue Analysis in Rapidly Solidified Powder Aluminum Alloy
980701	Increased Wetting of SaffilSt Reinforcement Preforms By the Addition of Bismuth to Aluminum Alloys
980688	Inelastic Behavior and Low Cycle Fatigue of Aluminum Alloy Subjected to Thermo-Mechanical Loading
980470	Life Cycle Assessment of a Transmission Case: Magnesium Versus Aluminum
980687	New Aluminum Piston Alloy With Increased Fatigue Strength At High Temperatures
980458	Performance of Laser-Processed Aluminum Alloys for Engine Bore Applications
980329	Process and Materials Development for Adherently Sprayed Valve Seats on Aluminum Engine Heads
981007	Recent Developments in Aa6016 Aluminum Type Body Sheet Product
980454	Research on the Application of Aluminum Door Beams for Automobiles
981188	Squeeze Cast Permanent Mold (Scpm) Processes for Automotive Aluminum Castings
980693	Static and Fatigue Strength Evaluation of Clinched Joints in An Aluminum Alloy
980460	The Corrosion Performance of Aluminum Automotive Body Panels in Service
980457	The Development of An Aluminum Differential Carrier
980456	Thixoforming of Aluminum
950720	Influence of Material and Mechanical Properties on Thermal Fatigue Life of Aluminum Castings
940429	The Northstar Cam Bearing Caps: a New Application for Aluminum P/M
920456	Fatigue Behavior of Squeeze Cast Metal Matrix Composites for Diesel Pistons
910833	Factors Affecting the Fatigue Performance of Metal Matrix Composites for Diesel Pistons
901725	New Casting Technology for Closed Deck Aluminum Cylinder Blocks
891989	Development of the Partial Strengthening Method for Automobile Aluminum Alloy Castings By Tig Surface Remelting
871952	Zinc Alloys: Specifications and Processing
810785	A Study of the Costs of a Production Deck Lid Optimized for Steel, Aluminum and Sheet Molding Compound
810822	A Study of the Technical and Economic Aspects of Artificially Aging Aluminum Automotive Alloys
810783	Minimizing the Weight and Cost of An Aluminum Deck Lid
810816	Weldbonding Aluminum in the Presence of Forming Lubricants
800800	A Rapid Method to Predict the Effectiveness of Inhibited Engine Coolants in Aluminum Heat Exchangers
800799	Prevention of Zinc Sublimation From Alclad Vacuum Brazing Sheet By Calcium Addition to 7072 Cladding
800801	The Influences of Deformation Mode and Heat Treatment on Post-Formed Tensile Properties of 6009 Aluminum Sheet
790712	Sheet Fabricated Aluminum Wheels for Smaller Passenger Cars
770832	A Unique Cooling Approach Makes Aluminum Alloy Cylinder Heads Cost Effective
770805	An Analysis of Automobile Weight and Its Reduction By Aluminum Substitution
770830	TodayS View of the Aluminum Automotive Radiator
080015	What carbon does to automobile steel